Purchase order 1630DC19P00001TERRACON CONSULTANTS INC
Overview
Award facts
- Net obligations
- $33.03K
- $33,028of $33.03K potential value
- Period of performance
- Oct 11, 2019 to Oct 11, 2019
- Ended
- Modifications
- 2
- Latest action Oct 11, 2019
- Contract type
- Purchase order
- PIID 1630DC19P00001
Description of requirement
ATLANTA JCC - GEOTECHNICAL ENGINEERING SERVICES BUILDING L (SOIL TESTING) FIELD EXPLORATION: BASED UPON THE SEPTEMBER 26 AND OCTOBER 3, 2018 CONFERENCE CALLS, ALTHOUGH FILL SOILS PLACED DURING CONSTRUCTION OF BUILDING L EXTEND OUTSIDE THE FOOTPRINT OF THE BUILDING IT IS BELIEVED THAT THE UPPER SUBGRADE SOILS HAVE BEEN SUFFICIENTLY DISTURBED SO AS NOT TO BE REPRESENTATIVE OF THE SOILS DIRECTLY BENEATH THE SLAB. THEREFORE, CORING OR SAW CUTTING THE SLAB WILL BE NECESSARY TO TEST NEAR SURFACE FILL SOILS. WE EXPECT TESTING AT THREE LOCATIONS WITHIN THE BUILDING. BECAUSE UNDISTURBED SAMPLING USING HAND AUGER BORINGS IS LIMITED TO ABOUT 5 FEET, THREE MECHANICAL BORINGS ADVANCED BY A DRILL RIG WILL BE PERFORMED NEAR THE SOUTHWEST AND WESTERN SIDES OF THE BUILDING TO SAMPLE FILLS AT DEPTH. WE NOTE, DEPENDING UPON THE FINDINGS OF OUR PROPOSED FIELD TESTING, ADDITIONAL EVALUATION MAY BE WARRANTED. WE WILL EXTEND THE MECHANICAL BORINGS TO AN APPROXIMATE DEPTH OF 20 FEET EACH, OR SHALLOWER REFUSAL. RELATIVELY UNDISTURBED SHELBY TUBE SAMPLES OF REPRESENTATIVE SOILS WILL BE OBTAINED FOR LABORATORY TESTING. THESE TESTS WILL INCLUDE DETERMINATION OF UNIT WEIGHT AND MOISTURE CONTENT, WHICH WILL BE USED TO ASSESS THE IN-SITU DEGREE OF COMPACTION. IN ADDITION TO PERFORMING IN-PLACE DENSITY TESTS BY DRIVE-RING AND NUCLEAR GAGE METHODS DIRECTLY BENEATH THE SLAB, A SOIL TECHNICIAN WILL ALSO RUN COMPARATIVE FIELD DENSITY TESTS ADJACENT TO THE EXTERIOR SOIL BORINGS IN THE VICINITY OF BUILDING L FOR THE PURPOSE OF CORRELATING SOIL DENSITIES BETWEEN UNDISTURBED SAMPLING AND IN-SITU TESTS. THESE TESTS WILL BE TAKEN AT A SHALLOW DEPTH, APPROXIMATELY SEVERAL INCHES TO ONE FOOT BELOW EXISTING GRADES. BULK SAMPLES WILL BE OBTAINED OF THE TESTED FILL SOILS SO LABORATORY STANDARD PROCTOR CURVES CAN BE DEVELOPED. LABORATORY TESTING WILL INCLUDE: 4 STANDARD PROCTOR TESTS 4 ATTERBERG LIMITS TESTS 4 GRAIN SIZE TESTS 16 MOISTURE CONTENT TESTS 16 UNIT WEIGHT DETERMINATIONS FROM UNDISTURBED SAMPLES UP TO 2 CONSOLIDATION TESTS, IF NEEDED TESTS ARE TO BE SCHEDULED THE WEEK OF OCTOBER 8, 2018. TIME IS OF THE ESSENCES.
Dates and value
- Award date
- Signed on Oct 5, 2018
- Potential end of performance
- Oct 10, 2019
- Current value
- $33,028Base and exercised options
- Potential value (if all options are exercised)
- $33,028
Obligations by fiscal year of action
- FY2019: $33,028
Total across 1 fiscal year: $33,028
Source: Federal Procurement Data System contract actions as published by SAM.gov and USAspending.gov; latest action recorded Oct 11, 2019. View on USAspending · Recipient on SAM.gov
Recipient
Business types and certifications
As represented in SAM.gov at the time of the action.
Subcontracting network
The prime, the subcontractors on this award, and their own subcontractors.
Agency and place
Awarding and funding
- Awarded by
- Department of Labor
- Employment And Training Administration
- DOL (ETA) OFC OF CONTRACT MGMT
- Funded by
- Department of Labor
- Office Of Job Corps
- DOL(JC)- ATLANTA JOB CORPS CENTER
- Funded from
- Construction, rehabilitation, and acquisition (CRA)Program activities016-0181Federal accounts (agency financial reports)
Place of performance
- Place of performance
- Atlanta, Fulton County, Georgia 30301-0372
- Congressional district (place of performance)
- GA-05As reported at the time of the action
Classification and competition
Classification
Competition
- Extent competed
- Competed under SAPF
- Solicitation procedures
- Simplified acquisitionSP1
- Set-aside
- No set-aside used
- Contract pricing
- Firm fixed priceJ
- Offers received
- 1
Contract details
- Subcontracting plan
- Plan not requiredB
- Major program
- Atlanta - geotechnical engineering services
- Service Contract Act labor standards
- Yes
- Commercial procedures
- Commercial itemA
- Government-furnished property
- Transaction does not use GFE/GFPN
- Bundled requirement
- Not bundledH
- Consolidated requirement
- Not consolidatedD
- Undefinitized action (terms not final)
- No
- Performance-based service acquisition
- No - service where PBA is not used.N
Linked notices
Notice | Notice ID | Type | Link | Posted |
|---|---|---|---|---|
Transaction history
Modification history
- Base award
- Oct 5, 2018Base obligation at award: $20,450
- Latest action
- Oct 11, 2019 — CloseoutModification P00002; administrative: no change in scope or value
- Latest funding action
- Apr 5, 2019 — Funding onlyModification P00001; obligation change +$12,578; funding only: changes obligations, not scope
- Actions by type
- Base award1
- Funding only1
- Closeout1
Similar awards
PIID | Match | Awardee |
|---|---|---|
All contract data
All contract data
Every other field reported for this award, as of its latest reported action
Competition
- Evaluation preference
- No preference used
- Local area set-aside
- No
- Synopsized publicly (SAM.gov / FedBizOpps)
- No
- Simplified procedures for commercial items
- No
- A-76 (FAIR Act) action
- No
Pricing and financing
- Paid by purchase card
- No
Socio-economic and policy
- Inherently governmental functions
- Other functionsOT
- Recovered materials and sustainability
- No clauses included and no sustainability includedC
- EPA-designated product
- Meets requirementsA
- Clinger-Cohen Act planning (IT)
- No
- Walsh-Healey Act (materials and supplies)
- No
- Construction wage rates (Davis-Bacon)
- No
Place and origin
- Domestic or foreign entity
- U.S. owned businessA
- Country of product or service origin
- United statesUSA
- Place of manufacture
- Not a manufactured end productC
Structure
- Award or IDV
- Award
- Award type
- Purchase orderB
- Awarding agency code
- 1601
- Awarding sub-tier code
- 1630
- Contracting office code
- 1630DC
- Transactions recorded under this award key
- 3
Funding
- Funding agency code
- 1601
- Funding sub-tier code
- 1631
- Funding office code
- 1631G1
- Treasury accounts
- 016-2017/2020-0181-000
- 016-2018/2021-0181-000
- Object classes
- 25.4: Operation and maintenance of facilities