Do GSFPNF7B2799UNIVERSAL PULTRUSIONS LLC

Description of requirement

TAS::17 1804::TAS CLEANER, VACUUM, ELECTRIC. SHALL BE 3M MODEL NU MBER 497AJM, ID 78-9236-5057-0 OR EQUAL. AWARDED IAW GSA ADVANTAGE PRICE FOLLOWING THE IPD, INCORPORATED AND MADE PART OF THIS ORDER L7 CLEANER, VACUUM, ELECTRIC: SHALL BE 3M MODEL NUMBER 497AJM-R, ID NO. 80-6103-7375-7, OR EQUAL, WITH THE FOLLOWING CHARACTERISTICS: THIS PORTABLE UNIT IS TYPICALLY USED FOR HIGH EFFICIENCY CLEANUP OF ELECTRONIC OFFICE EQUIPMENT SUCH AS COPY MACHINES. SHALL BE IN ACCORDANCE WITH THE FOLLOWING REQUIREMENTS: VOLTAGE - 115 VAC, 50/60 HZ FILTER - 3M, TYPE 2 AMPERAGE - 5.0 AMPS MOTOR - 1.0 HP VACUUM TOOL CASE DIMENSIONS: LENGTH - 18-1/4 INCHES WIDTH - 14-1/4 INCHES HEIGHT - 9-5/8 INCHES TABLE 1: ACCESSORIES TO BE FURNISHED WITH VACUUM QUANTITY DESCRIPTION OF ACCESSORY 1 EACH TYPE 2 FILTER 1 EACH DETACHABLE POWER CORD 1 EACH 32 INCH STRETCH HOSE 1 EACH CREVICE BRUSH & NOZZLE 1 EACH DUSTING BRUSH 1 EACH NEEDLE NOSE NOZZLE 1 EACH CURVED WAND NOZZLE 1 EACH STORAGE CASE W/2 CLOSURE LATCHES MOTOR: THE CONTINUOUS DUTY RATED MOTOR, SWITCHES AND ALL ASSOCIATED CONTROLS SHALL BE DESIGNED TO OPERATE FROM A 110-120 VAC, 50/60 HZ, SINGLE PHASE POWER SUPPLY. THE MOTOR SHALL HAVE AN INTERNAL THERMAL BREAKER THAT OPENS AT 221 DEGREES F, TO PREVENT OVERHEATING. THE VACUUM SHALL BE UL LISTED OR SHALL BE CERTIFIED BY A TESTING LABORATORY ACCEPTABLE TO THE GOVERNMENT, AS CONFORMING TO UL 1017, " VACUUM CLEANERS, BLOWER CLEANERS, AND HOUSEHOLD FLOOR FINISHING MACHINES , STANDARD FOR SAFETY. POWER CORD: SHALL BE DESIGNED WITH AN EQUIPMENT GROUNDING CONDUCTOR AND GROUNDING PLUG(S). SHALL INCORPORATE ONE HOODED END FEMALE RECEPTACLE, ON THE END WHICH DIRECTLY PLUGS INTO THE SIDE OF THE TOOL CASE. THE OTHER END OF THE POWER CORD SHALL BE A STANDARD THREE-WAY, 115 VAC, MALE PLUG. VACUUM TOOL CASE: THE PORTABLE VACUUM CLEANER IS DESIGNED AND SHALL BE PERMANENTLY MOUNTED IN A HIGH IMPACT, PLASTIC OR EQUIVALENT STORAGE CASE. THE INSIDE COVER OF THE CASE SHALL HAVE AN ACCESSORY DOOR, WITH FASTENER(S), TO STORE ALL ACCESSORIES, POWER CORD, SPECIFIED IN TABLE 1. THE STORAGE CASE WILL HAVE TWO (2) STURDY RELEASE LATCHES MOUNTED ON THE COVER/LID AND A CARRYING HANDLE. THE HANDLE SHALL BE PERMANENTLY ATTACHED TO THE CASE. THE COMPLETE VACUUM AND TOOL CASE ASSEMBLY, WITH ALL ACCESSORIES STORED AND ENCLOSED, SHALL WITHSTAND A TOTAL CARRYING CAPACITY OF A MINIMUM OF 17 POUNDS. ONE END OF THE CASE SHALL INCORPORATE VACUUM INLET AND EXHAUST PORTS PORT ONE INTEGRAL POWER SWITCH, A DETACHABLE POWER CORD RECEPTACLE THAT PLUGS INTO THE CASE. THE INLET PORT SHALL BE A COMPATIBLE SIZE WITH THE HOSE AND ATTACHMENTS. A VACUUM INLET PLUG SHALL BE FURNISHED TO PREVENT FOREIGN OBJECTS FROM ENTERING THE VACUUM PORT, WHEN UNIT IS NOT IN USE. SHALL BE DESIGNED WITH A HIGH QUALITY FILTRATION SYSTEM, THAT INCORPORATES A PLASTIC TYPE, TONER COLLECTION CANISTER, WHICH FITS DIRECTLY IN THE TOOL CASE, TO ELIMINATE ANY TONER BLOW-BY AND POSSIBLE HEALTH HAZARD. TOOLS: THE TOOLS SHALL BE CONSTRUCTED OF MATERIALS THAT ELIMINATE ELECTRICAL OR STATIC DISCHARGE. THE TOOLS SHALL BE DESIGNED TO PREVENT COMPONENT DAMAGE AND ANY POTENTIAL DANGER OF CONTACT. INSTALLATION AND OPERATING INSTRUCTIONS: THE VACUUM SHALL INCLUDE TOOL CASE INSTRUCTIONS, VACUUM OPERATING INSTRUCTIONS/MANUAL AND A REPLACEMENT PARTS LISTING FOR EACH UNIT. WORKMANSHIP: THE VACUUM CLEANER, TOOL CASE, POWER CORD AND ALL ACCESSORIES SHALL NOT CONTAIN ANY DEFECTS THAT WILL AFFECT FIT, FORM, FUNCTIONAL OR OPERATIONAL REQUIREMENTS. THERE SHALL BE NO DEFECTS THAT WILL CREATE A SAFETY OR HAZARDOUS CONDITION TO PERSONAL OR EQUIPMENT. IMAGE IS REPRESENTATIONAL AND INTENDED ONLY AS A GUIDE. UNIT OF ISSUE: THE UNIT OF ISSUE SHALL BE EA (ONE COMPLETE SYSTEM IN A PACKAGE). PRODUCT CONFORMANCE: THE PRODUCTS PROVIDED SHALL MEET THE SALIENT CHARACTERISTICS OF THIS PURCHASE DESCRIPTION, CONFORM TO THE PRODUCER S OWN DRAWINGS, SPECIFICATIONS, STANDARDS, AND QUALITY ASSURANCE PRACTICES AND BE THE SAME PR