Po NNX11CG46PQUEST PRODUCT DEVELOPMENT CORPORATION
Overview
Award facts
- Period of performance
- Aug 16, 2011 to Sep 29, 2011
- Ended
- Modifications
- 5
- Latest action Aug 16, 2011
- Contract type
- Po
- PIID NNX11CG46P
Description of requirement
FOR NASA EXTENDED MISSIONS IN LOW EARTH ORBIT (LEO), MICROMETEOROID AND ORBITAL DEBRIS (MMOD) PROTECTION FOR SPACECRAFT, SPACE STATIONS AND ORBITING FUEL DEPOTS IS CRITICAL TO MISSION SAFETY. MMOD PENETRATION IS A RISK FOR SPACECRAFT AND INSTRUMENTS; SPACECRAFT DESIGNERS MUST PROVIDE PROTECTION TO MINIMIZE MMOD DAMAGE. CRYOGENIC PROPELLANTS, AND THEIR THERMAL INSULATION, ARE ALSO AN IMPORTANT PART OF NASA'S NEXT GENERATION VEHICLES. ORBITAL FUEL DEPOTS MUST PROVIDE ZERO BOILOFF CRYOPROPELLANT LOSS AND MAINTAIN FLIGHTWORTHINESS OVER EXTENDED MISSIONS IN LEO. QUEST&BALL HAVE DEVELOPED AN INNOVATIVE NEXT GENERATION MLI THAT COULD PROVIDE BOTH HIGH PERFORMANCE THERMAL INSULATION AND LIGHT-WEIGHT MMOD PROTECTION. MMOD - INTEGRATED MLI (MMOD-IMLI) USES PRECISE LAYER SPACING CONTROL FROM POLYMER SPACERS TO PROVIDE THE BASIS FOR AN ADVANCED MULTISHOCK MMOD SHIELD. MMOD-IMLI IS A NOVEL MULTI-LAYER SYSTEM USING IMLI WITH PROPRIETARY MICROMOLDED POLYMER SPACERS TO CONTROL LAYER SPACING AND SUPPORT HIGH STRENGTH NEXTEL AND KEVLAR LAYERS. IMLI HAS BEEN PROVEN TO HAVE 27% LOWER HEAT LEAK PER LAYER THAN STATE-OF-THE-ART MLI. MMOD-IMLI WILL USE SPECIFIC LAYER MATERIALS, THICKNESSES AND LAYER SPACING TO PROVIDE EXCELLENT MMOD PROTECTION. PRELIMINARY ANALYSIS INDICATES MMOD-IMLI WILL PROVIDE SUPERIOR MMOD PROTECTION THAN WHIPPLE OR STUFFED WHIPPLE SHIELDS, THE CURRENT SHIELDS USED ON THE ISS, WITH SUBSTANTIALLY LOWER MASS AND PROVIDING 95% PROBABILITY OF NO PENETRATION FOR AN ORBITAL FUEL DEPOT, WHILE ALSO PROVIDING HIGHER THERMAL INSULATION THAN AN EQUIVALENT NUMBER OF LAYERS OF CONVENTIONAL MLI. THIS PHASE I RESEARCH WILL EVALUATE MMOD PROTECTION AND THERMAL PERFORMANCE AVAILABLE FROM OUR IMLI TECHNOLOGY, DESIGN MMOD-IMLI BLANKET/SHIELDS, BUILD AND TEST AN MMOD-IMLI PROTOTYPE FOR MMOD PROTECTION USING HYPERVELOCITY IMPACT TESTS AND THERMAL PERFORMANCE VIA LN2 CALORIMETRY, COMPARE MMOD AND HEAT LEAK RESULTS TO THOSE PREDICTED, AND DETERMINE FEASIBILITY OF MMOD-IMLI.
Dates and value
- Award date
- Signed on Feb 18, 2011
- Potential end of performance
- Sep 28, 2011
Source: Federal Procurement Data System contract actions as published by SAM.gov and USAspending.gov; latest action recorded Aug 16, 2011. View on USAspending · Recipient on SAM.gov
Recipient
Business types and certifications
As represented in SAM.gov at the time of the action.
Subcontracting network
The prime, the subcontractors on this award, and their own subcontractors.
Agency and place
Awarding and funding
- Awarded by
- National Aeronautics and Space Administration
- NASA SHARED SERVICES CENTER
- Funded by
- National Aeronautics and Space Administration
- KENNEDY SPACE CENTER
Place of performance
- Place of performance
- Arvada, Jefferson County, Colorado 80007-7570
- Congressional district (place of performance)
- CO-07As reported at the time of the action
Classification and competition
Classification
- Product or service (PSC)
- AR11R&D-AERO & SPACE TECH-B RES (research and development)
Competition
- Extent competed
- Full and open competition after exclusion of sourcesD
- Solicitation procedures
- Negotiated proposal/quoteNP
- Set-aside
- Small business set aside - totalSBA
- Contract pricing
- Firm fixed priceJ
- Offers received
- 4
Solicitation and notices
- Solicitation ID
- SBIR11PH01(as reported)
Contract details
- Subcontracting plan
- Plan not requiredB
- Major program
- Mmod-imli: integrated thermal insulation and micro
- Service Contract Act labor standards
- No
- Government-furnished property
- Transaction does not use GFE/GFPN
- Bundled requirement
- Not a bundled requirementD
- Consolidated requirement
- No
- Undefinitized action (terms not final)
- No
- Performance-based service acquisition
- Yes - service where PBA is used.Y
Linked notices
Notice | Notice ID | Type | Link | Posted |
|---|---|---|---|---|
Transaction history
Modification history
- Base award
- Feb 18, 2011Base obligation at award: $8,334
- Latest action
- Aug 16, 2011 — Supplemental agreement (within scope)Modification 5
- Latest substantive action
- Aug 16, 2011 — Supplemental agreement (within scope)Modification 5
- Latest funding action
- Jun 3, 2011 — Funding onlyModification 4; obligation change +$54,751; funding only: changes obligations, not scope
- Actions by type
- Base award1
- Funding only4
- Supplemental agreement (within scope)1
Similar awards
PIID | Match | Awardee |
|---|---|---|
All contract data
All contract data
Every other field reported for this award, as of its latest reported action
Competition
- Evaluation preference
- No preference used
- Simplified procedures for commercial items
- No
Pricing and financing
- Paid by purchase card
- No
Socio-economic and policy
- Recovered materials and sustainability
- No clauses included and no sustainability incluC
- EPA-designated product
- Not requiredE
- Research program (SBIR/STTR)
- Small business innovation research program phase i actionSR1
- Walsh-Healey Act (materials and supplies)
- No
- Construction wage rates (Davis-Bacon)
- No
Place and origin
- Domestic or foreign entity
- U.S. owned businessA
- Place of manufacture
- Not a manufactured end productC
Structure
- Award or IDV
- Award
- Award type
- PoB
- Awarding agency code
- 8000
- Awarding sub-tier code
- 8000
- Contracting office code
- NSSC0
- Transactions recorded under this award key
- 6
Funding
- Funding agency code
- 8000
- Funding sub-tier code
- 8000
- Funding office code
- KSC00