Definitive contract NNX16CM09CSECOND STAR ALGONUMERIX
Overview
Award facts
- Net obligations
- $751.02K
- $751,024of $751.02K potential value
- Period of performance
- May 23, 2018 to May 9, 2019
- Ended
- Modifications
- 3
- Latest action May 23, 2018
- Contract type
- Definitive contract
- PIID NNX16CM09C
Description of requirement
IGF::OT::IGF FOR X-RAY OPTICS, POLISHING THE MIRRORS IS ONE OF THE MOST COSTLY STEPS IN THE FABRICATION OF THE SYSTEM. BEATMARK SOFTWARE WILL SIGNIFICANTLY DECREASE THE COST OF X-RAY MIRROR PRODUCTION. BEATMARK WILL ALLOW FOR PARAMETRIZATION OF SURFACE METROLOGY DATA, WHICH WILL BE USED AS FEEDBACK FOR POLISHING PARAMETER OPTIMIZATION AND METROLOGY EXPERIMENT PLANNING. BY PROVIDING THE PARAMETRIZED OPTICAL SURFACE DESCRIPTION, BEATMARK WILL OPTIMIZE THE COSTLY POLISHING-AND METROLOGY CYCLE AND ENABLE NUMERICAL SIMULATION OF THE PERFORMANCE OF NEW X-RAY MIRRORS PERFORMED BY NASA. BEATMARK WILL HELP FULFILL THE REQUIREMENTS FOR SOPHISTICATED AND RELIABLE INFORMATION ABOUT THE EXPECTED SURFACE SLOPE AND HEIGHT DISTRIBUTIONS OF PROSPECTIVE X-RAY OPTICS BEFORE THE OPTICS ARE FABRICATED. AS WE DEMONSTRATED IN PHASE I, AN OPTICAL SURFACE CAN BE THOUGHT OF AS A STATIONARY UNIFORM STOCHASTIC PROCESS AND MODELED WITH OPTIMAL INVERTIBLE TIME INVARIANT FILTERS (INTILF). IT WAS FURTHER SHOWN THAT THE MODELING OF ONE-DIMENSIONAL (1D) SLOPE MEASUREMENTS ALLOWS HIGHLY CONFIDENT FITTING OF THE X-RAY MIRROR METROLOGY DATA WITH A LIMITED NUMBER OF PARAMETERS AND A 10-15% REDUCTION OF REQUIRED LENGTH OF METROLOGY PROFILES. THEORETICALLY, A REDUCTION OF 50% IS POSSIBLE. IN PHASE II, WE WILL CONDUCT FIELD TESTS TO ASSESS WHAT REDUCTION IN METROLOGY IS PRACTICAL AND IMPLEMENTABLE. WITH THE PARAMETERS OF THE INTILF MODEL DEVELOPED IN PHASE I, THE SURFACE SLOPE PROFILE OF OPTICS WITH A NEW SPECIFICATION CAN BE FORECAST RELIABLY. BEATMARK WILL ALSO PROCESS 2-D METROLOGY DATA AND PROVIDE A POLISHING OPTIMIZATION METHOD, BASED ON ANALYSIS OF THE MIRROR QUALITY RESPONSE TO THE POLISHING PARAMETERS. OUR PHASE I STUDIES INDICATED THAT THE OPTIMAL INTILF MODELING DESCRIBES THE MIRROR SURFACES WITH VERY FEW FILTER PARAMETERS AND HIGH SPECTRAL ACCURACY.
Dates and value
- Award date
- Signed on May 10, 2016
- Potential end of performance
- May 8, 2019
- Current value
- $751,024Base and exercised options
- Potential value (if all options are exercised)
- $751,024
Obligations by fiscal year of action
- FY2016: $751,024
Total across 1 fiscal year: $751,024
Source: Federal Procurement Data System contract actions as published by SAM.gov and USAspending.gov; latest action recorded May 23, 2018. View on USAspending · Recipient on SAM.gov
Recipient
Business types and certifications
As represented in SAM.gov at the time of the action.
Subcontracting network
The prime, the subcontractors on this award, and their own subcontractors.
Agency and place
Awarding and funding
- Awarded by
- National Aeronautics and Space Administration
- NASA SHARED SERVICES CENTER
- Funded by
- National Aeronautics and Space Administration
- NASA SHARED SERVICES CENTER
Place of performance
- Place of performance
- Needham Heights, Massachusetts
Classification and competition
Classification
- Product or service (PSC)
- AR11R&D- SPACE: AERONAUTICS/SPACE TECHNOLOGY (BASIC RESEARCH) (research and development)
Competition
- Extent competed
- Full and open competition after exclusion of sourcesD
- Solicitation procedures
- Negotiated proposal/quoteNP
- Set-aside
- Small business set aside - totalSBA
- Contract pricing
- Firm fixed priceJ
- Offers received
- 500
Solicitation and notices
- Solicitation ID
- NNX16SBIRIIC(as reported)
Contract details
- Subcontracting plan
- Plan not requiredB
- Major program
- Beatmark software to reduce the cost of x-ray mirror fabrication by optimization of polishing and
- Cost Accounting Standards clause
- No - CAS waiver approvedN
- Certified cost or pricing data
- No
- Service Contract Act labor standards
- No
- Commercial procedures
- Commercial item procedures not usedD
- Government-furnished property
- Transaction does not use GFE/GFPN
- Bundled requirement
- Not a bundled requirementD
- Consolidated requirement
- No
- Undefinitized action (terms not final)
- No
- Multi-year contract
- Yes
- Performance-based service acquisition
- No - service where PBA is not used.N
Linked notices
Notice | Notice ID | Type | Link | Posted |
|---|---|---|---|---|
Transaction history
Modification history
- Base award
- May 10, 2016Base obligation at award: $751,024
- Latest action
- May 23, 2018 — Other administrative actionModification 3; administrative: no change in scope or value
- Actions by type
- Base award1
- Other administrative action3
Similar awards
PIID | Match | Awardee |
|---|---|---|
All contract data
All contract data
Every other field reported for this award, as of its latest reported action
Competition
- Evaluation preference
- No preference used
- Local area set-aside
- No
- Simplified procedures for commercial items
- No
- A-76 (FAIR Act) action
- No
Pricing and financing
- Paid by purchase card
- No
Socio-economic and policy
- Inherently governmental functions
- Other functionsOT
- Recovered materials and sustainability
- No clauses included and no sustainability includedC
- EPA-designated product
- Not requiredE
- Clinger-Cohen Act planning (IT)
- No
- Research program (SBIR/STTR)
- Small technology transfer research program phase iiST2
- Walsh-Healey Act (materials and supplies)
- No
- Construction wage rates (Davis-Bacon)
- No
Place and origin
- Domestic or foreign entity
- U.S. owned businessA
- Country of product or service origin
- United statesUSA
- Place of manufacture
- Not a manufactured end productC
Structure
- Award or IDV
- Award
- Award type
- Definitive contractD
- Awarding agency code
- 8000
- Awarding sub-tier code
- 8000
- Contracting office code
- 80NSSC
- Transactions recorded under this award key
- 4
Funding
- Funding agency code
- 8000
- Funding sub-tier code
- 8000
- Funding office code
- 80NSSC