Definitive contract NNX16CM49CTETHERS UNLIMITED, INC.
Overview
Award facts
- Net obligations
- $2.52M
- $2,524,806of $2.52M potential value
- Outlays (paid to date)
- $42.97K
- $42.97K paid of $2.52M obligated$42,974
- Period of performance
- Jun 17, 2016 to Apr 30, 2021
- Ended
- Modifications
- 16
- Latest action Jan 27, 2021
- Contract type
- Definitive contract
- PIID NNX16CM49C
Contract value is the most the government could spend; obligations are what it has legally committed; outlays are what it has actually paid.
Description of requirement
IGF::OT::IGF THE PHASE II POSITRUSION EFFORT HAS BEEN ADVANCING THE IN-SPACE RECYCLING SYSTEM TO TRL 4 BY DEVELOPING AN ENGINEERING UNIT OF A RECYCLING SYSTEM FOR THE INTERNATIONAL SPACE STATION (ISS) THAT IS CAPABLE OF MELTING DOWN PLASTIC COMPONENTS AND FORMING THEM INTO FEEDSTOCK FOR 3D PRINTERS. FIGURE 1 (A) SHOWS A RENDER OF THE IN SPACE RECYCLER EXPRESS LOCKER PAYLOAD DESIGN. DURING THE PHASE II EFFORT, THE ISS COORDINATION OFFICE IDENTIFIED THAT INTEGRATION WITH THE CURRENT ISS PRINTER AND THE REQUIRED ASTRONAUT TIME ARE RISKS TO THE SUCCESS OF THE IN-SPACE RECYCLER DEMONSTRATION ON THE ISS. TO OBTAIN ISS APPROVAL, IT WAS STRONGLY RECOMMENDED TO INCLUDE BASIC PRINTING CAPABILITIES IN THE RECYCLING UNIT. THE SOLUTION DISCUSSED BY THE IN-SPACE MANUFACTURING PROGRAM OFFICE AND TETHERS UNLIMITED (TUI) IS TO AUGMENT THE CURRENT IN-SPACE RECYCLING SYSTEM WITH A SELF-CONTAINED PRINTING SYSTEM, RESULTING IN THE ENHANCED IN-SPACE RECYCLING SYSTEM. FIGURE 1 (B) SHOWS A POTENTIAL SINGLE-LOCKER CONFIGURATION SHOWN. THE IN-SPACE MANUFACTURING PROGRAM OFFICE AND TUI PROPOSE USING THE PHASE II-X OPTION TO FUND THE MATURATION AND INTEGRATION OF THIS ADDED FUNCTIONALITY. SPECIFICALLY, THE PURPOSE OF THE PHASE II-X IS TO SIGNIFICANTLY ADVANCE THE PHASE II WORK BY: (1) BRINGING THE DESIGN OF THE ADDED SELF-CONTAINED PRINTING SYSTEM TO THE SAME DESIGN MATURITY AS THE CURRENT RECYCLING SYSTEM DEVELOPMENT, (2) ADDRESSING THE INTEGRATION REQUIREMENTS OF THE CURRENT RECYCLING SYSTEM AND SELF-CONTAINED PRINTING SYSTEM, AND (3) PERFORMING DESIGN AND TESTING CYCLES FOR THE IN-SPACE ENHANCED RECYCLING SYSTEM TO REDUCE RISKS EARLY AND RESULT IN A MATURE FLIGHT READY ENGINEERING UNIT GOING INTO THE CRITICAL DESIGN REVIEW (CDR). IN THIS PHASE II-X EFFORT, NASA INTERNAL INVESTMENT AND SBIR MATCHING FUNDS WILL FUND SEPARATE TASKS AND DELIVERABLES. THE DETAILS OF THIS SEPARATION OF TASKS AND DELIVERABLES ARE GIVEN BELOW IN SECTIONS 1.2.2, 1.2.3, AND 1.2.4.
Dates and value
- Award date
- Signed on Jun 15, 2016
- Potential end of performance
- Apr 29, 2021
- Current value
- $2,524,806Base and exercised options
- Potential value (if all options are exercised)
- $2,524,806
Obligations by fiscal year of action
- FY2021: $7,974
- FY2018: $17,000
- FY2017: $2,249,832
- FY2016: $250,000
Total across 4 fiscal years: $2,524,806
Source: Federal Procurement Data System contract actions as published by SAM.gov and USAspending.gov; latest action recorded Jan 27, 2021. View on USAspending · Recipient on SAM.gov
Recipient
Business types and certifications
As represented in SAM.gov at the time of the action.
Subcontracting network
The prime, the subcontractors on this award, and their own subcontractors.
Agency and place
Awarding and funding
- Awarded by
- National Aeronautics and Space Administration
- NASA SHARED SERVICES CENTER
- Funded by
- National Aeronautics and Space Administration
- NASA SHARED SERVICES CENTER
- Funded from
- Exploration (DIRECT); Space technology (DIRECT)Program activities080-0124, 080-0131Federal accounts (agency financial reports)
Place of performance
- Place of performance
- Bothell, King County, Washington 98011-8804
- Congressional district (place of performance)
- WA-01As reported at the time of the action
Classification and competition
Classification
Competition
- Extent competed
- Full and open competition after exclusion of sourcesD
- Solicitation procedures
- Negotiated proposal/quoteNP
- Set-aside
- Small business set aside - totalSBA
- Contract pricing
- Firm fixed priceJ
- Offers received
- 500
Solicitation and notices
- Solicitation ID
- NNX14PHASEIII(as reported)
Contract details
- Subcontracting plan
- Plan not requiredB
- Cost Accounting Standards clause
- No - CAS waiver approvedN
- Certified cost or pricing data
- No
- Service Contract Act labor standards
- No
- Commercial procedures
- Commercial item procedures not usedD
- Government-furnished property
- Transaction does not use GFE/GFPN
- Bundled requirement
- Not a bundled requirementD
- Consolidated requirement
- No
- Undefinitized action (terms not final)
- No
- Multi-year contract
- Yes
- Performance-based service acquisition
- No - service where PBA is not used.N
Linked notices
Notice | Notice ID | Type | Link | Posted |
|---|---|---|---|---|
Transaction history
Modification history
- Base award
- Jun 15, 2016Base obligation at award: $250,000
- Latest action
- Jan 27, 2021 — Funding onlyModification 16; obligation change +$7,974; funding only: changes obligations, not scope
- Latest funding action
- Jan 27, 2021 — Funding onlyModification 16; obligation change +$7,974; funding only: changes obligations, not scope
- Actions by type
- Base award1
- Other administrative action13
- Funding only3
Similar awards
PIID | Match | Awardee |
|---|---|---|
All contract data
All contract data
Every other field reported for this award, as of its latest reported action
Competition
- Evaluation preference
- No preference used
- Local area set-aside
- No
- Simplified procedures for commercial items
- No
- A-76 (FAIR Act) action
- No
Pricing and financing
- Paid by purchase card
- No
- Latest action: change in base and exercised options
- $7,974
- Latest action: change in base and all options
- $7,974
Socio-economic and policy
- Inherently governmental functions
- Other functionsOT
- Recovered materials and sustainability
- No clauses included and no sustainability includedC
- EPA-designated product
- Not requiredE
- Clinger-Cohen Act planning (IT)
- No
- Research program (SBIR/STTR)
- Small business innovation research program phase iii actionSR3
- Walsh-Healey Act (materials and supplies)
- No
- Construction wage rates (Davis-Bacon)
- No
Place and origin
- Domestic or foreign entity
- U.S. owned businessA
- Country of product or service origin
- United statesUSA
- Place of manufacture
- Not a manufactured end productC
Structure
- Award or IDV
- Award
- Award type
- Definitive contractD
- Awarding agency code
- 8000
- Awarding sub-tier code
- 8000
- Contracting office code
- 80NSSC
- Transactions recorded under this award key
- 17
Funding
- Funding agency code
- 8000
- Funding sub-tier code
- 8000
- Funding office code
- 80NSSC
- Treasury accounts
- 080-2017/2018-0124-000
- 080-2018/2019-0124-000
- 080-2021/2022-0131-000
- Object classes
- 25.5: Research and development contracts
- Disaster or emergency funding (DEFC)
- Q: Not Designated Nonemergency/Emergency/Disaster/Wildfire Suppression