Purchase order NNX16CP78PBARRETT TECHNOLOGY, LLC
Overview
Award facts
- Net obligations
- $125K
- $125,000of $125K potential value
- Period of performance
- Jun 10, 2016 to Dec 9, 2016
- Ended
- Modifications
- 0
- Latest action Jun 1, 2016
- Contract type
- Purchase order
- PIID NNX16CP78P
Description of requirement
IGF::OT::IGF THIS SBIR WILL SUPPORT ROVER LOCOMOTION AND MANIPULATION WITH A SYSTEM OF NEWLY-DEVELOPED PENNY-SIZED 70-W BRUSHLESS SERVOMOTOR CONTROLLERS THAT ARE NETWORKED ON A BUS-TOPOLOGY CANBUS RUNNING CANOPEN. EACH "P3" CONTROLLER IS SMALL ENOUGH TO BE MOUNTED IN THE TINY VOLUME NORMALLY RESERVED FOR THE ENCODER; AND, INDEED, EACH P3 CARRIES THE ENTIRE ACTIVE ELECTRONICS OF THE ENCODER FUNCTION BY MEASURING THE MAGNETIC FIELD OF A 6X2.5-MM RADIALLY-POLARIZED BUTTON MAGNET BONDED TO THE TAIL OF THE SPINNING MOTOR SHAFT. A KALMAN FILTER ENABLES THE ENCODER TO READ TO 12-BITS-ABSOLUTE AT COMMUTATED SPEEDS UP TO 14,000 RPM. THE CONTROLLER HAS ALL OF THE FUNCTIONS EXPECTED OF CONVENTIONAL CONTROLLERS. HOWEVER, BASED ON THREE PATENTS OF INTERNATIONAL SCOPE AND A FOURTH PCT APPLICATION, THE PART COUNT HAS BEEN SUBSTANTIALLY REDUCED, WITH SUBSEQUENT REDUCED SIZE, FEWER PARTS TO FAIL, FEWER PARTS THAT OTHERWISE GENERATE QUIESCENT POWER, AND REDUCED COST. THE PHASE-I OBJECTIVES WILL SELECT TWO BRUSHLESS SERVOMOTORS OF VARYING SPECIFICATIONS THAT SUPPORT NASA'S ROVER MISSIONS. THE ELECTROMECHANICAL INTERFACE BETWEEN P3 AND THE MOTORS WILL BE DESIGNED, ASSEMBLED, FIXTURED WITH PARTICLE-BRAKE LOADS, AND THEN RIGOROUSLY STRESS TESTED BEFORE WORKING WITH NASA ENGINEERS TO CREATE A CONCEPTUAL DESIGN FOR PHASE II AND BEYOND. PHASE I IS EXPECTED TO RESULT IN A TRL OF 4. PHASE-II EFFORTS WILL FOCUS ON DESIGN-MODIFICATIONS TO ADDRESS ISSUES FOUND IN PHASE-I AND WILL ENCOMPASS RIGOROUS STRESS-TESTING IN RELEVANT ENVIRONMENTS. PHASE II IS EXPECTED TO RESULT IN A TRL OF 5. PHASE-III COMMERCIALIZATION EFFORTS WILL CREATE A SYSTEM OF MOTOR CONTROLLERS THAT NOT ONLY SUPPORT NASA ROVER MISSIONS, BUT ALSO SUPPORT OTHER SPACE-BASED NON-TERRESTRIAL APPLICATIONS, SUCH AS SERVOMOTOR ACTUATION ON SATELLITES FOR PRECISION ANTENNAE AND LASER POINTING AND THE DEPLOYMENT OF ARTICULATED STRUCTURES.
Dates and value
- Award date
- Signed on Jun 1, 2016
- Potential end of performance
- Dec 8, 2016
- Current value
- $125,000Base and exercised options
- Potential value (if all options are exercised)
- $125,000
Obligations by fiscal year of action
- FY2016: $125,000
Total across 1 fiscal year: $125,000
Source: Federal Procurement Data System contract actions as published by SAM.gov and USAspending.gov; latest action recorded Jun 1, 2016. View on USAspending · Recipient on SAM.gov
Recipient
Business types and certifications
As represented in SAM.gov at the time of the action.
Subcontracting network
The prime, the subcontractors on this award, and their own subcontractors.
Agency and place
Awarding and funding
- Awarded by
- National Aeronautics and Space Administration
- NASA SHARED SERVICES CENTER
- Funded by
- National Aeronautics and Space Administration
- NASA SHARED SERVICES CENTER
Place of performance
- Place of performance
- Newton, Middlesex County, Massachusetts 02458-1087
- Congressional district (place of performance)
- MA-04As reported at the time of the action
Classification and competition
Classification
- Product or service (PSC)
- AR11R&D- SPACE: AERONAUTICS/SPACE TECHNOLOGY (BASIC RESEARCH) (research and development)
Competition
- Extent competed
- Full and open competition after exclusion of sourcesD
- Solicitation procedures
- Negotiated proposal/quoteNP
- Set-aside
- Small business set aside - totalSBA
- Contract pricing
- Firm fixed priceJ
- Offers received
- 500
Solicitation and notices
- Solicitation ID
- NNX16SBIRPH1(as reported)
Contract details
- Subcontracting plan
- Plan not requiredB
- Major program
- Miniature 70-w brushless motor-controller for compact extraterrestrial-based actuation
- Service Contract Act labor standards
- No
- Commercial procedures
- Commercial item procedures not usedD
- Government-furnished property
- Transaction does not use GFE/GFPN
- Bundled requirement
- Not a bundled requirementD
- Consolidated requirement
- No
- Undefinitized action (terms not final)
- No
- Performance-based service acquisition
- No - service where PBA is not used.N
Linked notices
Notice | Notice ID | Type | Link | Posted |
|---|---|---|---|---|
Transaction history
Modification history
- Base award
- Jun 1, 2016Base obligation at award: $125,000
- Latest action
- Jun 1, 2016 — Base awardModification 0; obligation change +$125,000
- Actions by type
- Base award1
Similar awards
PIID | Match | Awardee |
|---|---|---|
All contract data
All contract data
Every other field reported for this award, as of its latest reported action
Competition
- Evaluation preference
- No preference used
- Local area set-aside
- No
- Simplified procedures for commercial items
- No
- A-76 (FAIR Act) action
- No
Pricing and financing
- Paid by purchase card
- No
- Latest action: change in base and exercised options
- $125,000
- Latest action: change in base and all options
- $125,000
Socio-economic and policy
- Recovered materials and sustainability
- No clauses included and no sustainability includedC
- EPA-designated product
- Meets requirementsA
- Clinger-Cohen Act planning (IT)
- No
- Research program (SBIR/STTR)
- Small business innovation research program phase i actionSR1
- Walsh-Healey Act (materials and supplies)
- No
- Construction wage rates (Davis-Bacon)
- No
Place and origin
- Domestic or foreign entity
- U.S. owned businessA
- Country of product or service origin
- United statesUSA
- Place of manufacture
- Not a manufactured end productC
Structure
- Award or IDV
- Award
- Award type
- Purchase orderB
- Awarding agency code
- 8000
- Awarding sub-tier code
- 8000
- Contracting office code
- 80NSSC
- Transactions recorded under this award key
- 1
Funding
- Funding agency code
- 8000
- Funding sub-tier code
- 8000
- Funding office code
- 80NSSC