Definitive contract NNX16CS81CAEROMANCER TECHNOLOGIES CORPORATION
Overview
Award facts
- Net obligations
- $750K
- $749,998of $750K potential value
- Period of performance
- Aug 16, 2019 to Mar 28, 2019
- Ended
- Modifications
- 5
- Latest action Aug 13, 2019
- Contract type
- Definitive contract
- PIID NNX16CS81C
Description of requirement
IGF::OT::IGF AEROMANCER TECHNOLOGIES PROPOSES TO DEVELOP A 3D GLOBAL LIDAR AIRSPEED SENSOR (3D-LGAS) USING AEROSOL CORRELATION VELOCIMETRY FOR STANDOFF SENSING OF HIGH-RESOLUTION SPATIALLY AND TEMPORALLY RESOLVED THREE-COMPONENT GLOBAL AIRSPEEDS USING A SCANNING ELASTIC LIDAR. THE PROPOSED INSTRUMENT USES RANGE-RESOLVED ELASTIC BACKSCATTER DATA FROM A SCANNING LIDAR BEAM TO GENERATE A 3D MAP OF AEROSOL DENSITY IN A SHORT TIME SPAN. AEROSOL DENSITY FLUCTUATIONS ARE CROSS-CORRELATED BETWEEN SUCCESSIVE SCANS TO OBTAIN THE DISPLACEMENTS OF THE AEROSOL FEATURES ALONG THE THREE AXES. CURRENT METHODS OF NON-INTRUSIVE GLOBAL AIRSPEED MEASUREMENT INCLUDE PARTICLE IMAGING VELOCIMETRY (PIV) AND DOPPLER GLOBAL VELOCIMETRY (DGV). COMMON DRAWBACKS OF THESE METHODS ARE THAT THEY REQUIRE PRECISE ALIGNMENT OF SEPARATE TRANSMITTERS AND RECEIVERS; AND IT IS EXPENSIVE AND UNWIELDY TO EXTEND THESE MEASUREMENTS FOR USE IN MEDIUM AND LARGE WIND TUNNELS. IN PHASE I, AEROMANCER IDENTIFIED THE MAIN REQUIREMENTS OF THE APPLICATION AND THE INSTRUMENT; DEVELOPED A CONCEPTUAL DESIGN OF A PHASE II PROTOTYPE; IDENTIFIED 3D AIRSPEED EXTRACTION ALGORITHMS; AND BENCHMARKED THE PERFORMANCE OF THE PROTOTYPE USING EXPERIMENTS AND NUMERICAL SIMULATIONS. IN PHASE II, AEROMANCER WILL DEVELOP THE FINAL DESIGN OF THE PROTOTYPE BY FINALIZING THE REQUIREMENTS; AND BY PERFORMING TRADE STUDIES AND AN EYE SAFETY ANALYSIS TO SELECT MAJOR COMPONENTS. THE PROTOTYPE WILL THEN BE FABRICATED, ASSEMBLED AND PACKAGED FOR WIND TUNNEL USE. ALGORITHMS FOR THE EXTRACTION OF 3D GLOBAL AIRSPEEDS, TURBULENCE AND SOLID OBJECT IDENTIFICATION WILL BE DEVELOPED. DIFFERENT SCANNING APPROACHES WILL BE DEVELOPED AND SOURCES OF ERROR IN THE MEASUREMENT WILL BE ANALYZED AND QUANTIFIED. SOFTWARE PACKAGES FOR CONTROL, DATA ACQUISITION, STORAGE AND PROCESSING WILL BE DEVELOPED. THE PROTOTYPE WILL BE TESTED IN THE LABORATORY FOR ALIGNMENT, CALIBRATION, VERIFICATION AND VALIDATION. LIMITED WIND TUNNEL TESTING WILL BE PERFORMED IF RESOURCES PERMIT.
Dates and value
- Award date
- Signed on Sep 29, 2016
- Potential end of performance
- Mar 27, 2019
- Current value
- $749,998Base and exercised options
- Potential value (if all options are exercised)
- $749,998
Obligations by fiscal year of action
- FY2019: -$5,000 (de-obligation)
- FY2016: $754,998
Total across 2 fiscal years: $749,998
Net de-obligation in that fiscal year (obligations withdrawn).
Source: Federal Procurement Data System contract actions as published by SAM.gov and USAspending.gov; latest action recorded Aug 13, 2019. View on USAspending · Recipient on SAM.gov
Recipient
Business types and certifications
As represented in SAM.gov at the time of the action.
Subcontracting network
The prime, the subcontractors on this award, and their own subcontractors.
Agency and place
Awarding and funding
- Awarded by
- National Aeronautics and Space Administration
- NASA SHARED SERVICES CENTER
- Funded by
- National Aeronautics and Space Administration
- NASA SHARED SERVICES CENTER
- Funded from
- Space technology (DIRECT)Program activities080-0131Federal accounts (agency financial reports)
Place of performance
- Place of performance
- Washington, District Of Columbia County, District Of Columbia 20010-7208
- Congressional district (place of performance)
- DC-98As reported at the time of the action
Classification and competition
Classification
- Product or service (PSC)
- AR11R&D- SPACE: AERONAUTICS/SPACE TECHNOLOGY (BASIC RESEARCH) (research and development)
Competition
- Extent competed
- Full and open competition after exclusion of sourcesD
- Solicitation procedures
- Negotiated proposal/quoteNP
- Set-aside
- Small business set aside - totalSBA
- Contract pricing
- Firm fixed priceJ
- Offers received
- 500
Solicitation and notices
- Solicitation ID
- NNX16SBIRII(as reported)
Contract details
- Subcontracting plan
- Plan not requiredB
- Major program
- 3d flow field measurements using aerosol correlation velocimetry
- Cost Accounting Standards clause
- No - CAS waiver approvedN
- Certified cost or pricing data
- No
- Service Contract Act labor standards
- No
- Commercial procedures
- Commercial item procedures not usedD
- Government-furnished property
- Transaction does not use GFE/GFPN
- Bundled requirement
- Not a bundled requirementD
- Consolidated requirement
- No
- Undefinitized action (terms not final)
- No
- Multi-year contract
- Yes
- Performance-based service acquisition
- No - service where PBA is not used.N
Linked notices
Notice | Notice ID | Type | Link | Posted |
|---|---|---|---|---|
Transaction history
Modification history
- Base award
- Sep 29, 2016Base obligation at award: $754,998
- Latest action
- Aug 13, 2019 — Other administrative actionModification 5; administrative: no change in scope or value
- Latest funding action
- May 5, 2019 — Funding onlyModification 4; obligation change -$5,000; funding only: changes obligations, not scope
- Actions by type
- Base award1
- Other administrative action4
- Funding only1
Similar awards
PIID | Match | Awardee |
|---|---|---|
All contract data
All contract data
Every other field reported for this award, as of its latest reported action
Competition
- Evaluation preference
- No preference used
- Local area set-aside
- No
- Simplified procedures for commercial items
- No
- A-76 (FAIR Act) action
- No
Pricing and financing
- Paid by purchase card
- No
Socio-economic and policy
- Inherently governmental functions
- Other functionsOT
- Recovered materials and sustainability
- No clauses included and no sustainability includedC
- EPA-designated product
- Not requiredE
- Clinger-Cohen Act planning (IT)
- No
- Research program (SBIR/STTR)
- Small business innovation research program phase ii actionSR2
- Walsh-Healey Act (materials and supplies)
- No
- Construction wage rates (Davis-Bacon)
- No
Place and origin
- Domestic or foreign entity
- U.S. owned businessA
- Country of product or service origin
- United statesUSA
- Place of manufacture
- Not a manufactured end productC
Structure
- Award or IDV
- Award
- Award type
- Definitive contractD
- Awarding agency code
- 8000
- Awarding sub-tier code
- 8000
- Contracting office code
- 80NSSC
- Transactions recorded under this award key
- 6
Funding
- Funding agency code
- 8000
- Funding sub-tier code
- 8000
- Funding office code
- 80NSSC
- Treasury accounts
- 080-2016/2017-0131-000
- Object classes
- 25.5: Research and development contracts