GovChime
AWARDPURCHASE ORDERSmall business

Purchase order NNX17CM53PSOTER TECHNOLOGY, LLC

Overview

Award facts

Net obligations
$124.72K
$124,724of $124.72K potential value
Period of performance
Jun 9, 2017 to Dec 8, 2017
Ended
Modifications
0
Latest action Jun 9, 2017
Contract type
Purchase order
PIID NNX17CM53P

Description of requirement

IGF::OT::IGF SOTER TECHNOLOGY IS PLEASED TO OFFER NASA A NEW TECHNOLOGY FOR MANUFACTURING DIFFRACTION LIMITED VISIBLE TELESCOPE MIRROR BLANKS. THIS TECHNOLOGY CAN SUPPORT BOTH SYMMETRIC PRIMARY MIRRORS AND OFF-AXIS SEGMENTS FOR SEGMENTED TELESCOPES. THE RECURRING FABRICATION COST AND CYCLE TIME FOR THESE MIRRORS IS QUITE LOW, ONCE NONRECURRING EQUIPMENT (E.G. THE OPTICAL TEST SET) HAS BEEN COMPLETED. FOR EXAMPLE, A 0.25 M DIAMETER MIRROR WITH>2 KHZ FIRST MODE AND 19.5 KG/M2 WOULD BE FABRICATED IN<30 DAYS. A 0.75 M DIAMETER MIRROR WITH>350 HZ FIRST MODE AT 21 KG/M2 WOULD BE COMPLETED IN<60 DAYS. THE COST OF THESE MIRRORS (ESPECIALLY AT SIZES>1 M) DEPENDS STRONGLY ON THE STIFFNESS REQUIREMENTS, BECAUSE STIFFNESS DRIVES OVERALL MIRROR VOLUME. FABRICATION COSTS FOR THE BLANK AND POLISHING ARE EXPECTED TO BE BETWEEN $0.3M/M2 AND $0.4 M/M2 FOR SIZES UP TO 1 M, AND<$0.6 M/M2 FOR SIZES UP TO 2 M. INITIAL FEA INDICATES THAT THESE MIRROR BLANKS WILL BE MORE THERMALLY STABLE THAN ULE MIRRORS. THE GOAL OF THESE TECHNOLOGY IS TO PRODUCE ASPHERIC MIRROR BLANKS WHICH CAN SUPPORT: - 10 NM RMS GLOBAL SURFACE FIGURE - 5 NM RMS MID-SPATIAL FREQUENCY ERRORS - 1 NM RMS SURFACE ROUGHNESS THIS PHASE I SBIR WILL PRODUCE AND THERMO OPTICALLY TEST A 100 MM MIRROR, WHILE APPLYING HEAT LOADS REPRESENTATIVE OF THOSE SEEN BY A MIRROR IN A REASONABLE TELESCOPE SHROUD. IN PHASE II, THIS TECHNOLOGY WILL BE DEMONSTRATED BY MAKING A 0.2 M DIAMETER DIFFRACTION LIMITED TELESCOPE FLAT FIELD TELESCOPE WITH A 0.2 M DIAMETER PRIMARY MIRROR THAT IS ~20 KG/M2,>400 HZ FIRST MODE, 10 NM RMS SURFACE, AND HAS<5 NM RMS MIDSPATIAL FREQUENCY ERRORS.

Dates and value

Award date
Signed on Jun 9, 2017
Potential end of performance
Dec 7, 2017
Current value
$124,724Base and exercised options
Potential value (if all options are exercised)
$124,724

Obligations by fiscal year of action

  • FY2017: $124,724

Total across 1 fiscal year: $124,724

Source: Federal Procurement Data System contract actions as published by SAM.gov and USAspending.gov; latest action recorded Jun 9, 2017. View on USAspending · Recipient on SAM.gov

Recipient

LocationLEESBURG, VA
UEIEK8DYSL4GKN9
Business sizeSmall businessSize at award, per the contracting officer
Parent companySOTER TECHNOLOGY, LLC

Business types and certifications

Women-ownedWomen-owned small business (WOSB)Minority-ownedSelf-certified small disadvantaged businessFor-profit organizationLimited liability companyPartnership or LLP

As represented in SAM.gov at the time of the action.

Subcontracting network

The prime, the subcontractors on this award, and their own subcontractors.

Subaward amounts are self-reported by prime contractors to SAM.gov and appear 1 to 2 months after the work. Duplicates are removed on a best-effort basis. Totals are incomplete and not an audit. Source: USAspending.

Agency and place

Awarding and funding

Awarded by
  1. National Aeronautics and Space Administration
  2. NASA SHARED SERVICES CENTER
Funded by
  1. National Aeronautics and Space Administration
  2. NASA SHARED SERVICES CENTER
Funded from
Space technology (DIRECT)Program activities080-0131Federal accounts (agency financial reports)

Place of performance

Place of performance
Leesburg, Loudoun County, Virginia 20176-6654
Congressional district (place of performance)
VA-10As reported at the time of the action

Classification and competition

Classification

Competition

Extent competed
Full and open competition after exclusion of sourcesD
Solicitation procedures
Negotiated proposal/quoteNP
Set-aside
Small business set aside - totalSBA
Contract pricing
Firm fixed priceJ
Offers received
500

Contract details

Subcontracting plan
Plan not requiredB
Major program
Rapid fabrication of high stability optical mirror blanks
Service Contract Act labor standards
No
Commercial procedures
Commercial item procedures not usedD
Government-furnished property
Transaction does not use GFE/GFPN
Bundled requirement
Not bundledH
Consolidated requirement
Not consolidatedD
Undefinitized action (terms not final)
No
Performance-based service acquisition
No - service where PBA is not used.N

Linked notices

Notice
Notice ID
Type
Link
Posted

Transaction history

Modification history

Base award
Jun 9, 2017Base obligation at award: $124,724
Latest action
Jun 9, 2017 — Base awardModification 0; obligation change +$124,724
Actions by type
  • Base award1
1 actions recorded, Jun 9, 2017 to Jun 9, 2017; each action counted once.

Similar awards

PIID
Match
Awardee

All contract data

All contract data

Every other field reported for this award, as of its latest reported action

Competition

Evaluation preference
No preference used
Local area set-aside
No
Simplified procedures for commercial items
No
A-76 (FAIR Act) action
No

Pricing and financing

Paid by purchase card
No
Latest action: change in base and exercised options
$124,724
Latest action: change in base and all options
$124,724

Socio-economic and policy

Recovered materials and sustainability
No clauses included and no sustainability includedC
EPA-designated product
Not requiredE
Clinger-Cohen Act planning (IT)
No
Research program (SBIR/STTR)
Small business innovation research program phase i actionSR1
Walsh-Healey Act (materials and supplies)
No
Construction wage rates (Davis-Bacon)
No

Place and origin

Domestic or foreign entity
U.S. owned businessA
Country of product or service origin
United statesUSA
Place of manufacture
Not a manufactured end productC

Structure

Award or IDV
Award
Award type
Purchase orderB
Awarding agency code
8000
Awarding sub-tier code
8000
Contracting office code
80NSSC
Transactions recorded under this award key
1

Funding

Funding agency code
8000
Funding sub-tier code
8000
Funding office code
80NSSC
Treasury accounts
  • 080-2017/2018-0131-000
Object classes
  • 25.5: Research and development contracts