GovChime
Notice ID: 63bd59bd18d81bb7fe1fdf162f4f8160Solicitation

Roof Insulation

Archived on September 16, 2010. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 AM UTC−05:00
Posted
September 16, 2009
Notice type
Solicitation
Set-aside
Small Business Set Aside - Total
Agency
Department of the InteriorBUREAU OF RECLAMATION

Notice details

Office
DENVER FED CENTER
Place of performance
Provo, UT 846067317 US
PSC
56: CONSTRUCTION AND BUILDING MATERIAL
Last updated
Sep 25, 2026

Identifiers

Solicitation number
09SQ49100
Notice ID
63bd59bd18d81bb7fe1fdf162f4f8160

Description

PROVO AREA OFFICEROOF INSULATION STATEMENT OF WORK REQUIREMENT Provide polyisocyanurate roof insulation and fasteners for the Provo Area Office located at 302 E. 1860 S. Provo, Utah, 84606. Approximately 30,261 square feet of insulation system is required. See Attachment 1 for overall roof plan with flat roof areas highlighted. Materials shall meet the following requirements: 1. Polyisocyanurate Roof Insulation; ASTM C1289:a. Qualities: Closed cell polyisocyanurate foam core bonded to heavy duty glass fiber mat facers.b. Average R-Value: Minimum: 19 d. Compliances: UL, WH or FM listed under Roofing Systems Federal Specification HH-I-1972, Class 1e. Acceptable Products:1) E'NRG'Y-2; Johns Manville2) Ultra Gard Gold; Johns Manville3) GAFTEMP Isotherm R; GAF4) Approved Equivalent 2. Fasteners: Corrosion resistant screw and plate fasteners in accordance with insulation manufacturers recommended fastening pattern for fastening into the existing corrugated metal deck substrate. Products shall be delivered to the Provo Area Office with seals and labels intact, in manufacturer's original containers, and with manufacturer's recommendation for temporary storage. The following submittals shall be required: 1. Product Data: Provide manufacturer's specification data sheets for insulation material and fasteners.2. Shop Drawings:a. Submit manufacturer's shop drawings indicating complete installation details of insulation system, including identification of each insulation block, sequence of installation, layout, drain locations, thicknesses.b. Shop drawing shall include: Outline of roof, location of drains, complete board layout of insulation components, thickness and the average "R" value for the completed insulation system. There is a drawing of the roof design attached to the solicitation.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Nancy Biddinger Purchasing Agent 8013791119 nbiddinger@usbr.gov; Point of Contact above, or if none listed, contact the IDEAS EC HELP DESK for assistance

Documents

No documents available.

Lifecycle

Solicitation:09SQ49100
  1. Pre-Solicitation
  2. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. Pre-SolicitationSep 16, 2009

    Roof Insulation

    Notice 3cbda59779a89adba8de9209485e5759 on SAM.gov

  2. SolicitationCurrentSep 16, 2009

    Roof Insulation

    Notice 63bd59bd18d81bb7fe1fdf162f4f8160 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

09SQ49100

Archive Date

Sep 16, 2010

Office Address

DENVER, CO, 80225