GovChime
Notice ID: 0ad4c499ecdf4124a98a097be2e32275Combined Synopsis/Solicitation

GPS Survey Equipment and Related Accessories

Active, responses due . Full description on SAM.gov.

Description

Combined Synopsis and Solicitation for Commercial Items (IAW FAR 12.603)

This is a combined synopsis/solicitation for commercial items prepared in accordance with (IAW) the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This Request for Quotation (RFQ), solicitation number FA491126QM005, is IAW FAR Parts 12 and 13 and is IAW provisions and clauses in Federal Acquisition Circular (FAC) 2025-06, effective as of 1 October 2025. The associated North American Industry Classification System (NAICS) number is 334516. The small business size standard is 1,000 employees.

Contracting Office Address:

Department of the Air Force, Air Force Central Command, 378th Expeditionary Contracting Squadron, Prince Sultan Air Base, KSA.

Description/Purpose:

This RFQ is for the purchase of GPS Survey Equipment and Related Accessories.

CLIN 0001 – GPS Survey Equipment IAW Attachment 1 – Price Proposal; Quantity (1); Unit (Lot)

If items are shipped from the US, items must be shipped to Dover AFB after coordination of DD 1149 & Military Shipping Labels. Contractors price proposal shall include all shipping charges and fees associated with shipping to Dover AFB.

Please note: If funds are not available to fund the entire contract value, the Government reserves the right to re-evaluate quotes by unit price per item and issue an award on a SOME, NONE, or ALL basis for each individual item needed.

Important Dates:

  • Questions must be submitted via email no later than 23 December 2025 at 3:30 PM AST.
  • Answers to questions submitted IAW specified due date will be provided on or around 26 December 2025.
  • Quotes are requested by 29 December 2025 at 3:30 PM AST.

The following attachments are applicable to this RFQ:

Attachment 1 – Price Proposal

Attachment 2 – Survey Equipment CLASS JA 7yrs 12Mar25 R1

Points of Contact (POCs):

Contracting Officer: TSgt Gabirel Robison; Telephone: (318) 460-2011; Email: gabriel.robison@us.af.mil

Provisions and Clauses

The following provisions and clauses are applicable to this combined synopsis/solicitation for commercial items prepared in accordance with (IAW) the format in FAR Subpart 12.6, solicitation number FA491126QM005. For the clauses and provisions listed in this solicitation, the terms “offeror” and/or “bidder” are considered to mean “vendor”; and the terms “offer” and/or “proposal” are considered to mean “quote”.

Instructions to Offerors:

FAR Provision 52.212‐1 Instructions to Offerors—Commercial Products and Commercial Services (Sep 2023) applies to this RFQ.

  • Offerors must follow the instructions contained herein and are required to meet all requirements, including terms and conditions, representations and certifications, and technical requirements, in addition to those identified as evaluation factors or subfactors. Failure to meet a requirement may result in an offeror being ineligible for award.
  • Offerors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale.
  • At a minimum, quote must be valid for 60 calendar days from date quotes are requested by.
  • Quote must include Freight on Board (FOB) Destination as shipping method.
  • Quote must contain expiration date, proposed delivery date, and any discount terms.
  • Offerors shall submit a single, comprehensive quote that encompasses their best offer and fully meets the required specifications.
  • Offerors shall provide detailed information on the product(s) being offered, including product/model number(s), comprehensive product description(s), and any other relevant details necessary for technical evaluator(s) to fully understand what is being quoted. This information is critical to ensure that the offered product(s) meet the government's requirements.

Evaluation Criteria:

FAR Provision 52.212‐2, Evaluation‐‐Commercial Products and Commercial Services (Nov 2021), applies to this RFQ. As prescribed in FAR 12.301(c), the following addendum is provided for this solicitation and hereby amends any language therein:

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered.

The following factors shall be used to evaluate offers:

  • Price: Offerors will be evaluated based upon price and ranked lowest to highest.
  • Technical: After ranking each quote from lowest to highest, the lowest quote submitted will be evaluated based upon ability to furnish the item(s) requested. If the lowest quote provided is deemed technically acceptable, an award will be made to the lowest offeror. If the lowest quote provided is deemed technically unacceptable, the next lowest quote(s) will be evaluated, and the process will continue until one is found to be technically acceptable.

Offerors must provide detailed information on the product(s) being offered including product/model number(s), comprehensive product description(s), and any other relevant details necessary for technical evaluator(s) to fully understand what is being quoted. This information is critical to ensure that the offered product(s) meet the government's requirements.

A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

52.212‐5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders— Commercial Products and Commercial Services.

Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services (JAN 2025)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7)  52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

☐ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

☐ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509)).

☐ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

☐ (4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) ( 41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community—see FAR 3.900(a).

☒ (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

☐ (6) [Reserved].

☐ (7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

☐ (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

☒ (9) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

☐ (10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders—Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) ( Pub. L. 115–390, title II).

☐ (11) (i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec 2023) ( Pub. L. 115–390, title II).

☐ (ii) Alternate I (Dec 2023) of 52.204-30.

☐ (12) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Jan 2025) ( 31 U.S.C. 6101 note).

☐ (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) ( 41 U.S.C. 2313).

☐ (14) [Reserved].

☐ (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) ( 15 U.S.C. 657a).

☐ (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

☐ (17) [Reserved]

☐ (18) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

☐ (ii) Alternate I (Mar 2020) of 52.219-6.

☐ (19) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

☐ (ii) Alternate I (Mar 2020) of 52.219-7.

☐ (20) 52.219-8, Utilization of Small Business Concerns (Jan 2025) (15 U.S.C. 637(d)(2) and (3)).

☐ (21) (i) 52.219-9, Small Business Subcontracting Plan (Jan 2025) (15 U.S.C. 637(d)(4)).

☐ (ii) Alternate I (Nov 2016) of 52.219-9.

☐ (iii) Alternate II (Nov 2016) of 52.219-9.

☐ (iv) Alternate III (Jun 2020) of 52.219-9.

☐ (v) Alternate IV (Jan 2025) of 52.219-9.

☐ (22) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

☐ (ii) Alternate I (Mar 2020) of 52.219-13.

☐ (23) 52.219-14, Limitations on Subcontracting (Oct 2022) (15 U.S.C. 657s).

☐ (24) 52.219-16, Liquidated Damages—Subcontracting Plan (Sep 2021) (15 U.S.C. 637(d)(4)(F)(i)).

☐ (25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (Feb 2024) (15 U.S.C. 657f).

☐ (26) (i) 52.219-28, Post Award Small Business Program Rerepresentation (Jan 2025) (15 U.S.C. 632(a)(2)).

☐ (ii) Alternate I (Mar 2020) of 52.219-28.

☐ (27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Oct 2022) (15 U.S.C. 637(m)).

☐ (28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) (15 U.S.C. 637(m)).

☐ (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) ( 15 U.S.C. 644(r)).

☐ (30) 52.219-33, Nonmanufacturer Rule (Sep 2021) ( 15 U.S.C. 637(a)(17)).

☐ (31) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

☒ (32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2025).

☐ (33) [Reserved]

☐ (34) [Reserved]

☐ (35) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) ( 38 U.S.C. 4212).

☐ (ii) Alternate I (Jul 2014) of 52.222-35.

☐ (36) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) ( 29 U.S.C. 793).

☐ (ii) Alternate I (Jul 2014) of 52.222-36.

☐ (37) 52.222-37, Employment Reports on Veterans (Jun 2020) ( 38 U.S.C. 4212).

☐ (38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

☒ (39) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O. 13627).

☒ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

☐ (40) 52.222-54, Employment Eligibility Verification (Jan 2025) (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

☐ (41) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

☐ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

☐ (42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (May 2024) ( 42 U.S.C. 7671, et seq.).

☐ (43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (May 2024) ( 42 U.S.C. 7671, et seq.).

☐ (44) 52.223-20, Aerosols (May 2024) ( 42 U.S.C. 7671, et seq.).

☐ (45) 52.223-21, Foams (May 2024) ( 42 U.S.C. 7671, et seq.).

☐ (46) 52.223-23, Sustainable Products and Services (May 2024) ( E.O. 14057, 7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C. 7671l).

☐ (47) (i) 52.224-3 Privacy Training (Jan 2017) ( 5 U.S.C. 552 a).

☐ (ii) Alternate I (Jan 2017) of 52.224-3.

☐ (48) (i) 52.225-1, Buy American-Supplies (Oct 2022) (41 U.S.C. chapter 83).

☐ (ii) Alternate I (Oct 2022) of 52.225-1.

☐ (49) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) ( 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

☐ (ii) Alternate I [Reserved].

☐ (iii) Alternate II (Jan 2025) of 52.225-3.

☐ (iv) Alternate III (Feb 2024) of 52.225-3.

☐ (v) Alternate IV (Oct 2022) of 52.225-3.

☐ (50) 52.225-5, Trade Agreements (NOV 2023) ( 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

☒ (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

☐ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

☐ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

☐ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

☒ (55) 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) ( E.O. 13513).

☐ (56) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

☐ (57) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

☐ (58) 52.232-30, Installment Payments for Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

☒ (59) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) ( 31 U.S.C. 3332).

☐ (60) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

☐ (61) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

☐ (62) 52.239-1, Privacy or Security Safeguards (Aug 1996) ( 5 U.S.C. 552a).

☐ (63) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Nov 2024) (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).

☐ (64) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).

☐ (65) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) ( 46 U.S.C. 55305 and 10 U.S.C. 2631).

☐ (ii) Alternate I (Apr 2003) of 52.247-64.

☐ (iii) Alternate II (Nov 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

☐ (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).

☐ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

☐ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

☐ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.C. chapter 67).

☐ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

☐ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

☐ (7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

☐ (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

☐ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).

☐ (10) 52.247-69, Reporting Requirement for U.S.-Flag Air Carriers Regarding Training to Prevent Human Trafficking (Jan 2025) ( 49 U.S.C. 40118(g)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1), in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509).

(ii) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) ( 41 U.S.C. 4712).

(iii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iv) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(v) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(vi) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

(vii) (A) 52.204–30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec 2023) ( Pub. L. 115–390, title II).

(B) Alternate I (Dec 2023) of 52.204–30.

(viii) 52.219-8, Utilization of Small Business Concerns (Jan 2025) ( 15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(ix) [Reserved]

(x) [Reserved]

(xi) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

(xii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

(xiii) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

(xiv) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xv) 52.222-41, Service Contract Labor Standards (Aug 2018) ( 41 U.S.C. chapter 67).

(xvi) (A) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O 13627).

(B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xvii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

(xviii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

(xix) 52.222-54, Employment Eligibility Verification (Jan 2025) (E.O. 12989).

(xx) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

(xxi) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

(xxii) 

(A) 52.224-3, Privacy Training (Jan 2017) ( 5 U.S.C. 552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xxiii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(xxiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxv) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.232-40.

(xxvi) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Nov 2024) (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).

(xxvii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) ( 46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.252‐1 Solicitation Provisions Incorporated by Reference

Solicitation Provisions Incorporated by Reference (Feb 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): https://www.acquisition.gov/

(End of provision)

52.252‐2 Clauses Incorporated by Reference

Clauses Incorporated By Reference (Feb 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): https://www.acquisition.gov/

(End of clause)

252.204‐7022 Expediting Contract Closeout.

Expediting Contract Closeout (MAY 2021)

  1. At the conclusion of all applicable closeout requirements of Federal Acquisition Regulation 4.804, the Government and Contractor shall mutually agree on the residual dollar amount remaining on the contract. Both the Government and Contractor agree to waive payment of any residual dollar amount of $1,000 or less to which either party may be entitled at the time of contract closeout.
  2. A residual dollar amount includes all money owed to either party at the end of the contract and as a result of the contract, excluding amounts connected in any way with taxation or a violation of law or regulation.
  3. For purposes of determining residual dollar amounts, offsets (e.g., across multiple contracts or orders) may be considered only to the extent permitted by law.

(End of clause)

252.232‐7006 Wide Area WorkFlow Payment Instructions.

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

  1. Definitions. As used in this clause‐

“Department of Defense Activity Address Code (DoDAAC)” is a six‐position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232‐7003, Electronic Submission of Payment Requests and Receiving Reports.

  1. Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232‐7003, Electronic Submission of Payment Requests and Receiving Reports

  1. WAWF access. To access WAWF, the Contractor shall—

    1. Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

    1. Be registered to use WAWF at https://wawf.eb.mil/ following the step‐by‐step procedures for self‐ registration available at this web site.

  1. WAWF training. The Contractor should follow the training instructions of the WAWF Web‐ Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/

  1. WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

  1. WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

    1. Document type. The Contractor shall submit payment requests using the following document type(s):

      1. For cost‐type line items, including labor‐hour or time‐and‐materials, submit a cost voucher.
      2. For fixed price line items—
        1. That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

COMBO

        1. For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A

      1. For customary progress payments based on costs incurred, submit a progress payment request.

      1. For performance‐based payments, submit a performance‐based payment request.
      2. For commercial item financing, submit a commercial item financing request.

    1. Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213‐ 1 is included in the contract.

    1. Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF

Data to be entered in WAWF

Pay Official DoDAAC

F87700

Issue By DoDAAC

FA4911

Admin DoDAAC**

FA4911

Inspect By DoDAAC

FA4911

Ship To Code

FA4911

    1. Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216‐ 7, Allowable Cost and Payment, as applicable.

    1. Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

  1. WAWF point of contact.
    1. The Contractor may obtain clarification regarding invoicing in WAWF from the WAWF helpdesk at 866‐618‐5988, if assistance is needed.

(End of clause)

DAFFARS Mandatory Procedures:

5352.201‐9101 AFGSC Ombudsman

OMBUDSMAN (Jul 2023)

  1. An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern.

  1. Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee‐employer actions, contests of OMB Circular A‐76 competition performance decisions).
  2. If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, for Air Force Global Strike Command (AFGSC) acquisitions, please contact the Director of Contracts, Air Force Installation Contracting Center (AFICC), Operating Location (OL) – Global Strike Command (GSC) (AFICC/KG OL‐GSC) via the following e‐mail workflow address: ig.afica_kg.workflow@us.af.mil. Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330‐1060, phone number (571) 256‐2395, facsimile number (571) 256‐2431.
  3. The ombudsman has no authority to render a decision that binds the agency.

Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the contracting officer.

(End of clause)

5352.223‐9001 Health and Safety on Government Installations

HEALTH AND SAFETY ON GOVERNMENT INSTALLATIONS (JUL 2023)

  1. In performing work under this contract on a Government installation, the contractor shall:
    1. Take all reasonable steps and precautions to prevent accidents and preserve the health and safety of contractor and Government personnel performing or in any way coming in contact with the performance of this contract; and

    1. Take such additional immediate precautions as the contracting officer may reasonably require for health and safety purposes.

  1. The contracting officer may, by written order, direct Department of the Air Force Occupational Safety and Health (AFOSH) Standards and/or health/safety standards as may be required in the performance of this contract and any adjustments resulting from such direction will be in accordance with the Changes clause of this contract.

  1. Any violation of these health and safety rules and requirements, unless promptly corrected as directed by the contracting officer, shall be grounds for termination of this contract in accordance with the Default clause of this contract.

(End of clause)

5352.242‐9000 Contractor Access to Department of the Air Force Installations

CONTRACTOR ACCESS TO AIR FORCE INSTALLATIONS (JUL 2023)

  1. The contractor shall obtain base identification and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Department of the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor‐furnished, contractor identification badges while visiting or performing work on the installation.

  1. The contractor shall submit a written request on company letterhead to the contracting officer listing the following: contract number, location of work site, start and stop dates, and names of employees and subcontractor employees needing access to the base. The letter will also specify the individual(s) authorized to sign for a request for base identification credentials or vehicle passes. The contracting officer will endorse the request and forward it to the issuing base pass and registration office or Security Forces for processing. When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver’s license, current vehicle registration, and valid vehicle insurance certificate to obtain a vehicle pass.

  1. During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site.

  1.  When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with AFI 31‐101, Integrated Defense, and DODMAN5200.02_AFMAN 16‐1405 , Air Force Personnel Security Program.
  2. Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office.

  1. Failure to comply with these requirements may result in withholding of final payment.

(End of clause)

In addition, offerors must also comply with the following FAR, DFARS and DAFFARS provisions and clauses:

Applicable provisions:

52.203‐18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements‐Representation (Jan 2017).

52.204‐6 Unique Entity Identifier (Oct 2016).

52.204‐16 Commercial and Government Entity Code Reporting (Aug 2020).

52.204‐17 Ownership or Control of Offeror (Aug 2020).

52.204‐22 Alternative Line‐Item Proposal (Jan 2017)

52.209‐2 Prohibition on Contracting with Inverted Domestic Corporations‐Representation (Nov 2015).

52.209‐11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (Feb 2016).

52.212‐3 Offeror Representations and Certifications—Commercial Products and Commercial Services (May 2024)

252.204-7024 Notice on the Use of the Supplier Performance Risk System

Applicable Clauses:

52.203‐15 Whistleblower Protections Under the American Recovery and Reinvestment Act of 2009 (June 2010).

52.203‐19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017).

52.204‐9 Personal Identity Verification of Contractor Personnel (Jan 2011).

52.204‐10 Reporting Executive Compensation and First‐Tier Subcontract Awards (Jun 2020).

52.204‐12 Unique Entity Identifier Maintenance (Oct 2016).

52.204‐13 System for Award Management Maintenance (Oct 2018).

52.204‐18 Commercial and Government Entity Code Maintenance (Aug 2020).

52.204‐19 Incorporation by Reference of Representations and Certifications (Dec 2014).

52.204‐25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment (Nov 2021).

52.209‐10 Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

52.212‐4 Contract Terms and Conditions—Commercial Products and Commercial Services (Nov 2023).

52.219‐28 Post‐Award Small Business Program Representation (Feb 2024).

52.223‐11 Ozone‐Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016).

52.232‐37 Multiple Payment Arrangements (May 1999).

52.232‐40 Providing Accelerated Payments to Small Business Subcontractors (Mar 2023).

252.203‐7000 Requirements Relating to Compensation of Former DoD Officials (Sep 2011).

252.203‐7002 Requirement to Inform Employees of Whistleblower Rights (Dec 2022).

252.232‐7010 Levies on Contract Payments (Dec 2006).

252.243‐ 7001 Pricing of Contract Modifications (Dec 1991).

252.244‐7000 Subcontracts for Commercial Products or Commercial Services (Nov 2023).

Full description on SAM.gov

Overview

Agency:
Department of WarDepartment of the Air Force
Office:AIR COMBAT COMMAND.US AIR FORCES CENTRAL.FA4911 378 ECONS
Posted:December 19, 2025
NAICS:334516: Analytical Laboratory Instrument Manufacturing
Last Updated:Oct 21, 2026
First published:
Last updated on SAM.gov:
PSC:6675: DRAFTING, SURVEYING, AND MAPPING INSTRUMENTS
Set-Aside:No Set aside used
Type:Combined Synopsis/Solicitation
Place of Performance:Al-Kharj, Ar Riyāḑ

Award Overview

Possible prior contracts

Sign in to see possible prior contracts for this requirement (matched by agency, NAICS and place of performance; not confirmed).

Contacts

Contracting Officer

Primary Contact

Documents

Files (3)

  • FA491126QM005 - GPS Survey Equipment Combo.pdf

    423 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download
  • Attachment 1 - Price Proposal.xlsx

    22 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download
  • Attachment 2 - Survey Equipment CLASS JA 7yrs 12Mar25 R1.pdf

    162 KBAdded in Combined Synopsis/Solicitation version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Combined Synopsis/SolicitationCurrent

    GPS Survey Equipment and Related Accessories

    Notice 0ad4c499ecdf4124a98a097be2e32275 on SAM.gov

Similar Opportunities

Title
Phase
Agency
NAICS
Set Aside
Posted
Deadline
Location
This is a solicitation for commercial products or commercial services prepared in accordance with the format in RFO 12.201-1, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation is being issued as a Request for Quote (RFQ) No. FA857127Q0006.
Solicitation334516No Set-Aside10/20/202610/26/2026Warner Robins, GA
10/20/2026: Updated List of Minimun Requirements. Notice from the United States Air Force, Air Force Life Cycle Management Center (AFLCMC), Installation Contracting Division, Base Support Contracting Branch at Wright-Patterson Air Force Base (WPAFB), Ohio: INTRODUCTION: AFLCMC Operational Contracting Branch at Wright-Patterson Air Force Base, Ohio, on behalf of the Air Force Institute of Technology (AFIT), is conducting market research through a Sources Sought Notice to identify potential sources, including small businesses, capable of manufacturing and delivering customized off-axis parabolic (OAP) mirrors and associated protected-gold coating services. These precision optical components will support AFIT’s Extreme Light Laboratory and its ultra-intense laser experiments involving advanced laser-matter interactions. This notice is issued solely to determine the availability and capability of qualified sources to meet the Government’s requirements. This notice is not a solicitation, request for quotation, or commitment by the Government to award a contract. A small business set-aside determination has not yet been made for this acquisition. REQUIREMENTS: The Government requires a contractor to provide all labor, materials, equipment, manufacturing capability, quality assurance, testing, inspection documentation, packaging, transportation, and other resources necessary to produce and deliver customized off-axis parabolic (OAP) mirrors and associated protected-gold coating services to the Air Force Institute of Technology (AFIT) at Wright-Patterson Air Force Base, Ohio. The required items and services include, but are not limited to: System and Compatibility Requirements: a. The contractor shall provide 66 customized off-axis parabolic (OAP) mirrors for use in AFIT’s Extreme Light Laboratory. b. Each mirror shall use a fused-silica substrate. c. Each mirror shall have a diameter of 30 mm. d. Each mirror shall have a parabolic focus at 45 degrees. e. The mirrors shall be compatible with the Government’s ultra-intense laser research application and shall provide the precision focal spot required for the Extreme Light Laboratory. Performance and Operational Specifications: a. The optical surface roughness shall be less than 1 nm root mean square (RMS). b. The scratch/dig specification shall be 20-10. c. The backside of each mirror substrate shall be polished. d. The contractor shall perform quality testing and inspection sufficiently to verify compliance with all required optical and surface-quality characteristics. e. The contractor shall provide applicable test data and inspection documentation with the delivered mirrors. Reagents and Consumables: a. The contractor shall provide protected-gold coating services for the required OAP mirrors. b. The protected gold coating shall be applied to the fused-silica substrate. c. The coating shall provide an average reflectivity of not less than 97 percent. d. The required reflectivity wavelength shall be 780 ± 40 nm. e. The required angle of incidence shall be 45 degrees. f. The contractor shall provide all materials, coating consumables, and related manufacturing resources necessary to meet the stated coating requirements. Physical and Safety Specifications: a. The contractor shall package and protect the mirrors to prevent damage during handling, shipment, and delivery. b. The contractor shall provide all required quality, inspection, and test documentation with delivery, including available certificate of conformance, material certification, surface-measurement data, and coating-performance data, as applicable. c. The contractor shall ship all required mirrors and associated documentation to the Government-designated delivery location at Wright-Patterson Air Force Base, Ohio. d. Delivery shall be completed within 98 calendar days after receipt of order (ARO). e. The mirrors delivered shall be free from defects in material and workmanship under normal and proper use for a minimum period of two years after Government receipt. SUBMISSION DETAILS: Interested parties are requested to submit a capability package that provides clear and convincing evidence of their ability to provide the services outlined above. In addition, interested parties must provide the following information: Company Name, Address, CAGE Code, and Unique Entity ID (UEI). Point of Contact (Name, Phone Number, and Email Address). Company business size status under a relevant NAICS code 334516. Prospective contractors must be registered in the System for Award Management (SAM) database at https://www.sam.gov to be eligible for a Department of Defense contract award. CLOSING: Responses to this Sources Sought notice must be submitted via email no later than October 23, 2026, at 11:00am Eastern Time. All correspondence sent via email must contain the subject line: “FA860127Q0003, Sources Sought: Off-Axis Parabolic Mirrors.” Be advised that due to network filters, attachments ending in .zip or .exe are not allowable and will be deleted. Please submit all response packages directly to the following Points of Contact (POCs): Contract Specialist: Name: Alejandro Quiles Email: alejandro.quiles_sanchez.1@us.af.mil Contracting Officer: Name: Jessica Stamper Email: jessica.stamper.2@us.af.mil This is a Sources Sought notice for market research purposes only. In accordance with Revolutionary FAR Overall (RFO) 15.201, responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. Any information submitted by respondents to this notice is strictly voluntary and will not be reimbursed by the Government. The Government’s assessment of the capability statements received will factor in whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside. Attachments: Statement of Work List of Minimun Requirements
Market Research334516No Set-Aside10/20/202610/23/2026Wright Patterson AFB, OH
Notice from the United States Air Force, Air Force Life Cycle Management Center (AFLCMC), Installation Contracting Division, Base Support Contracting Branch at Wright-Patterson Air Force Base (WPAFB), Ohio: INTRODUCTION: AFLCMC Operational Contracting Branch at Wright-Patterson Air Force Base, Ohio, on behalf of the Air Force Institute of Technology (AFIT), is conducting market research through a Sources Sought Notice to identify potential sources, including small businesses, capable of manufacturing and delivering customized off-axis parabolic (OAP) mirrors and associated protected-gold coating services. These precision optical components will support AFIT’s Extreme Light Laboratory and its ultra-intense laser experiments involving advanced laser-matter interactions. This notice is issued solely to determine the availability and capability of qualified sources to meet the Government’s requirements. This notice is not a solicitation, request for quotation, or commitment by the Government to award a contract. A small business set-aside determination has not yet been made for this acquisition. REQUIREMENTS: The Government requires a contractor to provide all labor, materials, equipment, manufacturing capability, quality assurance, testing, inspection documentation, packaging, transportation, and other resources necessary to produce and deliver customized off-axis parabolic (OAP) mirrors and associated protected-gold coating services to the Air Force Institute of Technology (AFIT) at Wright-Patterson Air Force Base, Ohio. The required items and services include, but are not limited to: System and Compatibility Requirements: a. The contractor shall provide 66 customized off-axis parabolic (OAP) mirrors for use in AFIT’s Extreme Light Laboratory. b. Each mirror shall use a fused-silica substrate. c. Each mirror shall have a diameter of 30 mm. d. Each mirror shall have a parabolic focus at 45 degrees. e. The mirrors shall be compatible with the Government’s ultra-intense laser research application and shall provide the precision focal spot required for the Extreme Light Laboratory. Performance and Operational Specifications: a. The optical surface roughness shall be less than 1 nm root mean square (RMS). b. The scratch/dig specification shall be 20-10. c. The backside of each mirror substrate shall be polished. d. The contractor shall perform quality testing and inspection sufficiently to verify compliance with all required optical and surface-quality characteristics. e. The contractor shall provide applicable test data and inspection documentation with the delivered mirrors. Reagents and Consumables: a. The contractor shall provide protected-gold coating services for the required OAP mirrors. b. The protected gold coating shall be applied to the fused-silica substrate. c. The coating shall provide an average reflectivity of not less than 97 percent. d. The required reflectivity wavelength shall be 780 ± 40 nm. e. The required angle of incidence shall be 45 degrees. f. The contractor shall provide all materials, coating consumables, and related manufacturing resources necessary to meet the stated coating requirements. Physical and Safety Specifications: a. The contractor shall package and protect the mirrors to prevent damage during handling, shipment, and delivery. b. The contractor shall provide all required quality, inspection, and test documentation with delivery, including available certificate of conformance, material certification, surface-measurement data, and coating-performance data, as applicable. c. The contractor shall ship all required mirrors and associated documentation to the Government-designated delivery location at Wright-Patterson Air Force Base, Ohio. d. Delivery shall be completed within 98 calendar days after receipt of order (ARO). e. The mirrors delivered shall be free from defects in material and workmanship under normal and proper use for a minimum period of two years after Government receipt. SUBMISSION DETAILS: Interested parties are requested to submit a capability package that provides clear and convincing evidence of their ability to provide the services outlined above. In addition, interested parties must provide the following information: Company Name, Address, CAGE Code, and Unique Entity ID (UEI). Point of Contact (Name, Phone Number, and Email Address). Company business size status under a relevant NAICS code 334516. Prospective contractors must be registered in the System for Award Management (SAM) database at https://www.sam.gov to be eligible for a Department of Defense contract award. CLOSING: Responses to this Sources Sought notice must be submitted via email no later than October 23, 2026, at 11:00am Eastern Time. All correspondence sent via email must contain the subject line: “FA860127Q0003, Sources Sought: Off-Axis Parabolic Mirrors.” Be advised that due to network filters, attachments ending in .zip or .exe are not allowable and will be deleted. Please submit all response packages directly to the following Points of Contact (POCs): Contract Specialist: Name: Alejandro Quiles Email: alejandro.quiles_sanchez.1@us.af.mil Contracting Officer: Name: Jessica Stamper Email: jessica.stamper.2@us.af.mil This is a Sources Sought notice for market research purposes only. In accordance with Revolutionary FAR Overall (RFO) 15.201, responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. Any information submitted by respondents to this notice is strictly voluntary and will not be reimbursed by the Government. The Government’s assessment of the capability statements received will factor in whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside. Attachments: Statement of Work List of Minimun Requirements
Market Research334516No Set-Aside10/14/202610/23/2026Wright Patterson AFB, OH
This is a solicitation for commercial products or commercial services prepared in accordance with the format in RFO 12.201-1, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation is being issued as a Request for Quote (RFQ) No. FA857127Q0006.
Solicitation334516No Set-Aside10/08/202610/26/2026Warner Robins, GA
This is a combined synopsis/solicitation notice for the procurement of two (2) complete and ready-to-use Zeiss Axio Observer 5 Materials Microscope Systems. This requirement is single source to HiTech Instruments Inc., as they are Zeiss' exclusive authorized reseller to Tinker Air Force Base. As stated and confirmed by the Original Equipment Manufacturer (OEM), Zeiss. FOB Destination is Tinker AFB OK.
Combined Synopsis334516No Set-Aside10/02/202610/07/20260, OK

Additional Details

Solicitation Number

FA491126QM005

Archive Date

Jan 13, 2027

Place of Performance Country

SAUDI ARABIA

Office Address

APO, AE, 09877-1110