GovChime
Notice ID: eedafef9bbf14b25be4f451abdef9aefCombined Synopsis/Solicitation

Bench Top Reactor System, 2 Liter

Archived on August 8, 2020. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM UTC−04:00
Posted
July 9, 2020
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
334516: Analytical Laboratory Instrument Manufacturing
Agency
Department of AgricultureAGRICULTURAL RESEARCH SERVICE

Notice details

Office
USDA ARS NEA AAO ACQ/PER PROP
Place of performance
Glenside, PA, 19038
Last updated
Dec 4, 2025

Identifiers

Solicitation number
1006160
Notice ID
eedafef9bbf14b25be4f451abdef9aef

Description

This is a combined Synopsis/solicitation for the United States Department of Agriculture, Agriculture Re search Service, prepared in accordance with the format to Subpart 12.6, as supplemented with additional information included in this solicitation. This announcement constitutes the only solicitation, quotes are being requested and a written notice, will not be issued. Solicitation Number 1006160 - is issued as a request for quotation (RFQ). This solicitation document incorporates provisions and clauses which are in effect through Federal Acquisition Circular 2020-06 dated June 5, 2020. This solicitation shall be reserved exclusively for small businesses with a small business size standard of 500 employees - referencing North American Industrial Classification Code 333999. SHIP TO ADDRESS 600 E. Mermaid Lane - Wyndmoor, Pennsylvania 19038 Minimum requirements The USDA, Sustainable Biofuels and Co-Products research unit at the USDA-ARS Eastern Regional Research Center is seeking to purchase a pressurized 2 L reactor vessel. The unit shall be utilized to chemically pretreat agricultural feedstocks at larger scale in order to test scalability of pretreatment processes and to generate sufficient quantities of pretreated feedstock for downstream hydrolysis and fermentation studies, and lignin recovery from pretreatment liquor. The pressurized reactor vessel should include: 2 L reactor vessel that can operate at temperature conditions that range from 120 C to 200 C and be pressurized up to 60 bar (what is 60 bar ?) Bar is a metric unit of pressure. Reactor vessel must be chemically compatible with organic solvents (acetone or ethanol), and be resistant to low concentrations of sulfuric acid (< 1% in solution) Mixing and temperature control The reactor vessel must include some form of control unit where the user can change mixing speed, or operating temperature. Heating apparatus capable of achieving desired temperature range (what is the range ? ) This is the same as above.) The temperature range for this research is indeed stated above. I added this bullet point because some vendors do not automatically include a heating apparatus with the reactor vessel and might make it a separate purchase. Key critically urgent specification/minimum requirement. The reactor must be able to withstand at most 1% sulfuric acid in solution. This represents the upper concentration limit for the research I am performing. The lower concentration limit USDA will research will be as low as 0.1% sulfuric acid in solution. The 1% sulfuric acid concentration because it represents the upper limit that the reactor must be able to withstand. Clauses/Provisions Incorporated by reference: This requirement incorporates one or more clauses by reference with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed at the following address: https//www.acquisition.gov/far. 52.212-5 - Commercial Items (JULY 2020) 52.204-7 - System for Award Management (OCT 2018 ) 52.204-13 - System for System for Award Management Maintenance ( OCT 2018) 52.204-16 - Commercial and Government Entity Code Reporting (JULY 2016) 52.209-2 - Prohibition on Contracting with Inverted Domestic Corporations - Representation ( NOV 2015) 52.212-1 - Instructions to Offerers Commercial Items (JUNE 2020) 52.212-4 - Contract Terms and Conditions-Commercial Items ( OCT 2018 ) 52.223-1 - Bio-Based Product Certification (MAY 2012) 52.232-39 - !Jnenforceability of Unauthorized Obligations ( JUNE 2013) 52.232-40 - Providing Accelerated Payments to Small Business Sub contractors (DEC 2013) 52.237-2 - Protection of Government Buildings, Equipment and Vegetation (APR 1984) No late vendor quotes or vendor questions shall be accepted referencing the above solicitation number. All Vendor Questions, are due via email by no later than Thursday July 16, 2020 by 12:00 noon E.S.T to John.Wilkinson@usda.gov. I, John Wilkinson will respond back to all vendor questions via email referencing the above solicitation number - by No later than Tuesday July 21, 2020. Oral Communications are not acceptable in response to this requirement. All quotes are due via email to me: John.Wilkinson@usda.gov by no later than 12:00 p.m. E.S.T. on July 24, 2020. Anticipated award date is July 27, 2020 or shortly thereafter. Important Note: the vendor who offers the - Best Value to the Federal Government - which meets all of the above USDA end-user requirements-specifications shall be awarded a USDA Purchase Order. Special Note The vendor - must already - have their companies Dun and Bradstreet Number --mandatorily - already be registered by July 24, 2019 - as both - current and active at the web site: www.beta.sam.gov at phone no. 1-866-606-8220.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:1006160
  1. Combined Synopsis
  1. Combined SynopsisCurrentJul 9, 2020

    Bench Top Reactor System, 2 Liter

    Notice eedafef9bbf14b25be4f451abdef9aef on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Proposed procurement for NSN 6630001506486 ANALYSIS KIT,HYDRAULIC: Line 0001 Qty 6 UI EA Deliver To: DLA DISTRIBUTION JACKSONVILLE By: 0101 DAYS ADO Approved sources are 08071 57L414; 08071 XX6504700; 78286 57L414. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
-Combined Synopsis11/04/2026
The Naval Surface Warfare Center Philadelphia Division intends to procure FM-6 ferrogram maker instrument on a sole source to Trico. The proposed contract action is for supplies for which the Government intends to solicit and award to only one source under the authority of FAR 6.302. any questions should be e-mailed to : Joseph.w.aprile2.civ@us.navy.mil Phone Calls will NOT be accepted.
-Special Notice11/09/2026
Pre-Solicitation Notice for the notice of intent to award a sole source contract. This is not a solicitation. The Veterans Health Administration (VHA), Office of Research and Development (R&D), Regional Procurement Office (RPO) – East in Pittsburgh, PA intends to negotiate on a sole source basis for Avidity Science Bottle Filling Station to replace the current Avidity Edstrom Model BFS-675 Bottle Filling Station for Research Services at the Michael E. DeBakey VA Medical Center that is twenty years old and reached the end of its life expectancy. The facility requires the replacement to be the same size and same make/model to utilize the existing space, power hookups, drain, and water inlet valve without new construction or abatement. The Avidity Science Bottle Filling Station consists of: Edstrom Model BFS-675 Bottle Filling Station Made in the USA Frame and cabinet components constructed of 316 stainless steel Corrosion resistant wetted parts compatible with untreated, purified, acidified & chlorinated water Able to chlorinate, acidify or medicate bottled water for animals Adjustable, no drip fill nozzles to ensure uniform filling Interchangeable custom designed fill manifold for multiple size bottles Two user programmable fill times for two different bottle sizes Removable sidewall allows loading cases from conveyor feed systems Solution and injection tank located on sides for easy access Solution tank has screw-on lid to prevent spills Mixing chamber assures complete dispersal of chemical additives Optional pH monitor available for acidification application Separate stainless-steel platform for reservoir tank mounts on either side Discharge capacity: 1000 to1200 ML/min per dispensing nozzle Removal of old unit Installation of the same model This notice of intent is not a request for competitive quotes. However, any responsible source who can provide an equivalent service with the features described above, and who is the Original Equipment Manufacturer (OEM), authorized dealer, authorized distributor, or authorized reseller of all the items listed above, may submit a capability statement to the contracting office no later than September 14, 2026, 2:00 PM, MT. Interest/capability statements which specifically detail how your equipment meets the requirement may be sent to Robert.Dobson1@va.gov. No telephone responses will be accepted. A determination not to compete the proposed requirement based upon the responses to this notice is solely within the discretion of the Government
-Special Notice09/23/2026
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and separate written solicitation will not be issued. Solicitation number 12444027Q0008 is issued as a Request for Quotation (RFQ) for Seed Lab Equipment for the Southern Region. This acquisition is not set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 334516. This acquisition is an unrestricted requirement. All responsible sources may submit a quotation which will be considered by the agency. Quotes are due on 11/19/2026, 5pm EST. Email quotes to john.camacho@usda.gov
-Combined Synopsis11/19/2026
USDA Food Safety and Inspection Service is part of a science-based national system to ensure food safety and food defense. FSIS ensures food safety through the authorities of the Federal Meat Inspection Act, the Poultry Products Inspection Act, and the Egg Products Inspection Act, as well as humane animal handling through the Humane Methods of Slaughter Act. As such this RFI seeks to gather information on commercially available STEC colony isolation procedures that increase the likelihood of identifying and isolating a variety of STEC in raw beef or other food products, regardless of serogroup, from a mixed population. FSIS seeks to understand the level of granularity in STEC confirmation protocols, including selective media that do not rely on STEC serogroup. Please review the attached documents for more information.
-Market Research12/08/2026

Additional Details

Solicitation Number

1006160

Archive Date

Aug 8, 2020

Office Address

BELTSVILLE, MD, 20705