GovChime
Notice ID: ba9dc272fa5d470799305112f7c155cdCombined Synopsis/Solicitation

Chopper Head Replacement

Archived on September 11, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
2:00 PM UTC−04:00
Posted
August 21, 2024
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
333111: Farm Machinery and Equipment Manufacturing
Agency
Department of AgricultureAGRICULTURAL RESEARCH SERVICE

Notice details

Office
USDA ARS NEA AAO ACQ/PER PROP
Place of performance
Pennsylvania Furnace, PA, 16865
Last updated
Dec 4, 2025

Identifiers

Solicitation number
12305B24Q0127
Notice ID
ba9dc272fa5d470799305112f7c155cd

Description

Title: The USDA ARS National Cold-Water Marine Aquaculture Centers Shellfish Genetics Lab is looking to procure a BRAND NAME OR EQUAL chopper head replacement for Wintersteiger Cibus S Forage Harvester. NAICS 333111 Farm Machinery and Equipment Manufacturing PSC - 2420 TRACTORS, WHEELED This is a combined synopsis/solicitation for commercial items/services prepared in accordance with the format in subpart 12.6, utilizing FAR part 13 procedures, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. (ii) The solicitation number is 12305B24Q0127 and this combined synopsis/solicitation is issued as a request for quote (RFQ). (iii) A statement that the solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2024-05. (iv) This is a total 100% small business set-aside and the associated NAICS code is 333111 and small business size standard is 1250 employees. (v) USDA ARS requires procurement of a BRAND NAME OR EQUAL Chopper head replacement part, see Specifications attached. (vi) Place of service and acceptance: USDA-ARS-PSWMRU 1881 West Pine Grove Rd., Gate F Furnace, PA 16865 (vii) Provision 52.212-1, Instructions to Offerors-Commercial Products and Commercial Services, applies to this acquisition. (viii) Provision 52.212-2, Evaluation-Commercial Products and Commercial Services applies to this acquisition. (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: The Government intends to award a Firm Fixed-Price (FFP) contract. The award will be made on the basis of Lowest Price Technically Acceptable (LPTA). "LPTA" means, the expected outcome of the acquisition, that results from the selection of the lowest evaluated price (evaluated as total cost of all line items) is a technically acceptable quotation, that fully meets all specifications listed. In order to be considered for award OFFERORS SHALL SUBMIT THE FOLLOWING: Submit documentation showing technical capability to meet or exceed Performance Elements and Benchmarks in the Statement of Work. Submit Firm Fixed Price quotation (quote on company letterhead) detailing the item description, total price and valid for at least 60 days after receipt of quote. Item delivered FOB Destination inclusive of all costs. Submit SAM Unique Entity ID (UEI) with quotation. Place of Manufacturer (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offers specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. DISCUSSIONS: The Government intends to award without discussions but reserves the right to conduct discussions should it be deemed in the Government's best interest. (ix) Offers must have a completed copy of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, uploaded on sam.gov by the time quotes are due. (x) The clause at 52.212-4, Contract Terms and Conditions-Commercial Products and Commercial Services, applies to this acquisition. (xi) The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Products and Commercial Services, applies to this acquisition. Additional clauses included as attachment: Contract Terms and Conditions (xii) Quoted prices must include all applicable costs. (xii) Quotes are due on 08/27/2024 at 2:00 PM EST by email to Rebecca Lumpkin at rebecca.lumpkin@usda.gov (Must include the Notice ID in the Subject Line) (xiv) Rebecca Lumpkin may be reached at rebecca.lumpkin@usda.gov for specific questions regarding this combined solicitation. Questions by interested parties regarding the requirement must be submitted by 08/23/2024 by 2:00 PM EST.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:12305B24Q0127
  1. Combined Synopsis
  1. Combined SynopsisCurrentAug 21, 2024

    Chopper Head Replacement

    Notice ba9dc272fa5d470799305112f7c155cd on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
(1) Engine and Performance Min Requirements: (a.) Rated Engine Power: 180hp (b.) Maximum Engine Power: 195hp. (c.) Engine Configuration: 6.8 L, six-cylinder turbocharger. (d.) Turbocharger: Variable-geometry turbocharger. (e.) Intelligent Power Management: Up to 20ho boost for transport and non-stationary power take-off (PTO) applications. (f.) Selected Transmission: PowerQuad Plus; 20 forward / 20 reverse speeds. (g.) Maximum Transport Speed: 40 km/h (25 mph). (2) Wheel, Tire, and Axle Configuration: Designed with single front wheels for optimized turning radius, paired with dual rear wheels for maximum pulling traction. (a.) Rear Axle Setup: Dual (Double) Wheels. (b.) Rear Tire Size: 480/80R50 OR 480/80R46 (Duals on each side). (c.) Front Axle Setup: Single Wheels. (d.) Front Tire Size: 420-85R34 or 420/85R30 (single on each side). (e.) Rear Axle Dimension: R and P rear axle - 3.62 in. x 100. in. (f.) Front Axle Type: Unsuspended 4ED front axle or Triple Link Suspension (TLS) front axle (if available and required). (g.) Rear Rims: Adjustable cast wheels. (h.) Front Rims: Adjustable steel wheels. (3) Dimensions, Weight, and Ballasting: (a.) Wheelbase: 2,800 mm (110.2 in.) (b.) Drive Configuration: Mechanical front-wheel drive (MFWD)/4WD. (c.) Front Base Weight: 243 lbs. (d.) Additional Ballast: Quick attach and removal weights/ 1,706 lbs. total ballast. (4) Hydraulic, Hitch, and PTO Systems (min requirements): (a.) Hydraulic System: Pressure-and flow-compensated (PFC) closed-loop system. (b.) Hydraulic Pump Capacity: 114 L/min. (c.) Rear Selective Control Valves: As required for mission equipment. (d.) Rear PTO: Dual-speed 540/1,000 rpm. (e.) Rear Hitch: Category 3 3-point hitch. (f.) Center Link: Category 3 center link with ball end. (g.) Draft Links: Draft links with telescopic ball ends. (h.) Stabilizers: Stabilizer sway-control blocks. (5) Cab, Comfort, and Precision Ag Features: (a.) Cab Type: Enclosed cab with mechanical cab suspension. (b.) Operator Features: Passenger seat, 3-pin power socket, internal rear-view mirror, manually telescoping exterior mirrors, and rear-hitch remote control. (c.) Lighting Package: Economy lighting package with beacon light. (d.) Precision Agriculture Features: G5 Command Center display, StarFire receiver, and telematics connectivity (if required)
59%
Combined Synopsis11/24/2026
Item: Sub-Compact Utility Tractor with Front Loader and Turf Tire Package. Brand Name: Kubota BX2380 Sub-Compact Utility Tractor package configured with a frontend loader (Kubota LA344 or equal) and heavy duty turf-safe tires. Salient Characteristics: Requirement for the procurement of a brand-name-or-equal Kubota BX2380 Sub-Compact Utility Tractor package configured with a front-end loader (Kubota LA344 or equal) and heavy-duty turf-safe tires. This utility tractor is required for groundskeeping and landscape maintenance in tight, confined spaces where standardcompact tractors are too large or heavy, risking structural damage to manicured turf and fields. Salient Characteristics: 1. Engine and Power Specifications: Engine Type: Must be a liquid-cooled, 3-cylinder diesel engine. Engine Output: Minimum 21.6 Gross Horsepower (HP) (rated up to 23.0 Gross HP). Power Take-Off (PTO) System: Must feature a standard Live Independent PTO. Rear PTO Speed: Must feature a 540 RPM speed threshold. Mid PTO Speed: Must feature a 2500 RPM speed threshold (supporting mid-mount mower compatibility). PTO Horsepower: Minimum 17.7 HP at the PTO shaft. 2. Drivetrain and Hydrostatic Transmission: Drivetrain: Must feature true Four-Wheel Drive (4WD / 4x4) with a standard operator-controlled rear differential lock. Transmission Type: Must feature a Hydrostatic Transmission (HST) with a high-low gear shift (minimum of 2 forward / 2 reverse speed ranges). Braking System: Must feature maintenance-free, wet disc brakes. Steering: Must feature hydrostatic power steering. 3. Hydraulic and 3-Point Hitch Capabilities: Hydraulic Pump Output: Must feature a minimum 6.0 Gallons Per Minute (GPM) pump flow capacity. 3-Point Hitch Type: Must feature an SAE Category I rear three-point hitch. Hitch Lift Capacity: Minimum 680 lbs. lift capacity measured 24 inches behind the lift points (pins). 4. Front Loader Attachment Specifications: Loader Integration: Must accept a factory-matched, quick-mount front-end loader. Bucket Style: Loader bucket must support two-lever quick-attach or pin-on configurations. Hydraulic Couplers: Must feature flat-faced, no-spill hydraulic couplers to prevent oil leakage during attachment swaps. Loader Lift Capacity: Minimum 613 lbs. at maximum height (measured at the pivot pin) with a quick-attach bucket. Minimum 739 lbs. with a rigid pin-on bucket. Maximum Lift Height: Minimum 70.7 inches clearance (at the pivot pin) to support unloading into utility bins. 5. Safety, Tires, and Dimensional Constraints: Operator Safety: Must include a standard, folding Roll-Over Protective Structure (ROPS). Tire Package: Must be equipped with heavy-duty, low-impact Turf Tires to prevent turf destruction. Standard agricultural or industrial tires are not acceptable. Weight Profile: Tractor dry weight (with ROPS, excluding loader attachment) must fall strictly within 1,430 to 1,445 lbs. to prevent field compaction. Turning Radius: Turning radius must be 7.5 feet or less (without brakes applied) to navigate restricted environments. Delivery Destination: FOB Destination. Assembly: Equipment must be delivered fully assembled, serviced, fluids topped off, and ready for immediate operation upon receipt.
59%
Combined Synopsis08/07/2026
Tractor
59%
Combined Synopsis07/24/2026
2026 John Deere 8R 340 Cabbed Tractor Like/Or Equal with Degelman 5900-12 Blade Like/Or Equal with Trade-in. 340 Engine Horsepower Front Wheeled Drive Cabbed Tractor with 12 foot Blade (Attached pdf Specifications document must be filled out, signed and met/exceeded to be considered. TO INCLUDE: Trade-in of 2014 John Deere 8320R with 2014 Degelman 12-5900 Blade, as seen in attached pictures. JD 8320R Serial #1RW8320RCEP095543 and Degelman 12-5900 Serial #DOZ28433 is included. (*Make sure to deduct the trade-in value from your quote.)
59%
Combined Synopsis05/27/2026
Reason for amendment is to correct and clarify that we are looking for a loader package with the tractor. John Deere 6M130 Cab Tractor with Heat/AC, Wipers, Mirror, 4 Wheel Drive, and Loader Kit. MUST be able take a trade-in of a 6430 John Deere tractor with loader attached. Tractor has 1576.2 hours on the dash.
59%
Combined Synopsis04/10/2026

Additional Details

Solicitation Number

12305B24Q0127

Archive Date

Sep 11, 2024

Office Address

BELTSVILLE, MD, 20705