GovChime
Notice ID: d60b86c5ff4e47c1ba79e2b5e9bd09bdCombined Synopsis/Solicitation

Maize Plot Research Combine- Zurn 160/ Equivalent

Archived on July 16, 2021. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
2:00 PM UTC−05:00
Posted
June 17, 2021
Notice type
Combined Synopsis/Solicitation
NAICS
333111: Farm Machinery and Equipment Manufacturing
Agency
Department of AgricultureAGRICULTURAL RESEARCH SERVICE

Notice details

Office
USDA ARS SEA AAO ACQ/PER PROP
Place of performance
Clayton, 27520
Last updated
Sep 25, 2026

Identifiers

Solicitation number
12405B21Q0060
Notice ID
d60b86c5ff4e47c1ba79e2b5e9bd09bd

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation will not be issued. The solicitation number is 12405B21Q0060 and is issued as a request for quotation (RFQ). The NAICS code is 333111, Farm Machinery and Equipment Manufacturing. This solicitation document incorporates those provision and clauses in effect through Federal Acquisition Circular 2021-05. The USDA-ARS Central Crops Research Station facility in Clayton, NC requires the following: (QTY 1) Plot Combine, Zurn 160/ Equivalent (QTY 1) Two row corn header (QTY 1) Reverse mechanism for the corn header (QTY 1) 2020 model cabin and camera system (QTY 1) Grain tank with sensor (QTY 1) Four wheel drive and Highway lighting package (QTY 1) HarvestMaster Weigh system with components (QTY 1) Shipping, setup and training Delivered to the USDA, ARS, Central Crops Research Station 13223 US 70 West, Clayton, NC 27520-2128 See attached specification requirements. Any quotes not meeting the minimum specifications will not be considered. In order to be considered for award Offerors shall provide 1) a Quote on company letterhead detailing the item specifications, unit price per item, discounts, shipping costs, total price, be valid for at least 60 days after receipt of quote; and 2) Must have an active Registration in SAM.gov and the Representation and Certification section must be completed electronically in the System for Award Management (SAM) website at www.sam.gov. Any amendment and documents related to this procurement will be available electronically at the Government Point of Entry (GPE). The significant evaluation factors, in the relative order of importance, are (i) technical capability of the item offered to meet the Government requirement including delivery date; (ii) past performance; and (iii) price (based on F.O.B. Destination), technical and past performance are more important than price. Quotes will be evaluated by performing a comparative evaluation in accordance with FAR 13.106-2(b)(3) to determine which quote represents the best as a whole. Award will be made based on overall Best Value to the Government. The Government anticipates award of a firm fixed priced contract resulting from this solicitation to the responsible offeror whose offer conforms to the specifications that will be the most advantageous to the government. Responses shall include technical specifications, descriptive material and capabilities of the offeror’s equipment. Offerors shall identity where the offered item meets or does not meet each of the Government's functional and performance minimum specifications listed herein. All sources wishing to furnish a quotation must respond by 2:00 p.m. CST, July 1, 2021. Quotations are to be addressed to Shalunda Mix, Contract Specialist, at shalunda.mix@usda.gov. Additional information may be obtained by contacting the Contract Specialist by email.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

Solicitation:12405B21Q0060
  1. Combined Synopsis
  1. Combined SynopsisCurrentJun 17, 2021

    Maize Plot Research Combine- Zurn 160/ Equivalent

    Notice d60b86c5ff4e47c1ba79e2b5e9bd09bd on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
(1) Engine and Performance Min Requirements: (a.) Rated Engine Power: 180hp (b.) Maximum Engine Power: 195hp. (c.) Engine Configuration: 6.8 L, six-cylinder turbocharger. (d.) Turbocharger: Variable-geometry turbocharger. (e.) Intelligent Power Management: Up to 20ho boost for transport and non-stationary power take-off (PTO) applications. (f.) Selected Transmission: PowerQuad Plus; 20 forward / 20 reverse speeds. (g.) Maximum Transport Speed: 40 km/h (25 mph). (2) Wheel, Tire, and Axle Configuration: Designed with single front wheels for optimized turning radius, paired with dual rear wheels for maximum pulling traction. (a.) Rear Axle Setup: Dual (Double) Wheels. (b.) Rear Tire Size: 480/80R50 OR 480/80R46 (Duals on each side). (c.) Front Axle Setup: Single Wheels. (d.) Front Tire Size: 420-85R34 or 420/85R30 (single on each side). (e.) Rear Axle Dimension: R and P rear axle - 3.62 in. x 100. in. (f.) Front Axle Type: Unsuspended 4ED front axle or Triple Link Suspension (TLS) front axle (if available and required). (g.) Rear Rims: Adjustable cast wheels. (h.) Front Rims: Adjustable steel wheels. (3) Dimensions, Weight, and Ballasting: (a.) Wheelbase: 2,800 mm (110.2 in.) (b.) Drive Configuration: Mechanical front-wheel drive (MFWD)/4WD. (c.) Front Base Weight: 243 lbs. (d.) Additional Ballast: Quick attach and removal weights/ 1,706 lbs. total ballast. (4) Hydraulic, Hitch, and PTO Systems (min requirements): (a.) Hydraulic System: Pressure-and flow-compensated (PFC) closed-loop system. (b.) Hydraulic Pump Capacity: 114 L/min. (c.) Rear Selective Control Valves: As required for mission equipment. (d.) Rear PTO: Dual-speed 540/1,000 rpm. (e.) Rear Hitch: Category 3 3-point hitch. (f.) Center Link: Category 3 center link with ball end. (g.) Draft Links: Draft links with telescopic ball ends. (h.) Stabilizers: Stabilizer sway-control blocks. (5) Cab, Comfort, and Precision Ag Features: (a.) Cab Type: Enclosed cab with mechanical cab suspension. (b.) Operator Features: Passenger seat, 3-pin power socket, internal rear-view mirror, manually telescoping exterior mirrors, and rear-hitch remote control. (c.) Lighting Package: Economy lighting package with beacon light. (d.) Precision Agriculture Features: G5 Command Center display, StarFire receiver, and telematics connectivity (if required)
44%
Combined Synopsis11/24/2026
Amendment 0002: Extend quotation due date. Amendment 0001: Amend model number to match revised Salient Characteristics and new due date. Notice to Offerors: Funding is not currently available for this requirement. The Government anticipates awarding the contract no later than 1 October 2026; however, award may occur earlier if funding becomes available. This combined synopsis and solicitation is prepared in accordance with Revolutionary FAR Overhaul (RFO) Part 12, Commercial Products and Commercial Services. This announcement constitutes the only solicitation; quotations are being requested, and a separate written solicitation will not be issued. The Air Force Test Center (AFTC), Operational Contracting Division, Eglin Air Force Base, Florida, is issuing Request for Quotations (RFQ) FA282326Q0066 to establish a contract for John Deere 5075E Cab Tractor with Rhino AG 4155 Attachment Brand Name or Equal. All work shall be performed in accordance with (IAW) Salient Characteristics, dated 13 August 2026, and will be executed as Firm-Fixed-Price contract. This acquisition is a 100 percent Small Business set-aside under NAICS code 333111 (Farm Machinery and Equipment Manufacturing), which carries a size standard of 1,250 Employees. The applicable Product Service Code (PSC) is 2420. Offerors must clearly identify their business size status within their quotations to be considered eligible for award.
44%
Combined Synopsis09/10/2026
Item: Sub-Compact Utility Tractor with Front Loader and Turf Tire Package. Brand Name: Kubota BX2380 Sub-Compact Utility Tractor package configured with a frontend loader (Kubota LA344 or equal) and heavy duty turf-safe tires. Salient Characteristics: Requirement for the procurement of a brand-name-or-equal Kubota BX2380 Sub-Compact Utility Tractor package configured with a front-end loader (Kubota LA344 or equal) and heavy-duty turf-safe tires. This utility tractor is required for groundskeeping and landscape maintenance in tight, confined spaces where standardcompact tractors are too large or heavy, risking structural damage to manicured turf and fields. Salient Characteristics: 1. Engine and Power Specifications: Engine Type: Must be a liquid-cooled, 3-cylinder diesel engine. Engine Output: Minimum 21.6 Gross Horsepower (HP) (rated up to 23.0 Gross HP). Power Take-Off (PTO) System: Must feature a standard Live Independent PTO. Rear PTO Speed: Must feature a 540 RPM speed threshold. Mid PTO Speed: Must feature a 2500 RPM speed threshold (supporting mid-mount mower compatibility). PTO Horsepower: Minimum 17.7 HP at the PTO shaft. 2. Drivetrain and Hydrostatic Transmission: Drivetrain: Must feature true Four-Wheel Drive (4WD / 4x4) with a standard operator-controlled rear differential lock. Transmission Type: Must feature a Hydrostatic Transmission (HST) with a high-low gear shift (minimum of 2 forward / 2 reverse speed ranges). Braking System: Must feature maintenance-free, wet disc brakes. Steering: Must feature hydrostatic power steering. 3. Hydraulic and 3-Point Hitch Capabilities: Hydraulic Pump Output: Must feature a minimum 6.0 Gallons Per Minute (GPM) pump flow capacity. 3-Point Hitch Type: Must feature an SAE Category I rear three-point hitch. Hitch Lift Capacity: Minimum 680 lbs. lift capacity measured 24 inches behind the lift points (pins). 4. Front Loader Attachment Specifications: Loader Integration: Must accept a factory-matched, quick-mount front-end loader. Bucket Style: Loader bucket must support two-lever quick-attach or pin-on configurations. Hydraulic Couplers: Must feature flat-faced, no-spill hydraulic couplers to prevent oil leakage during attachment swaps. Loader Lift Capacity: Minimum 613 lbs. at maximum height (measured at the pivot pin) with a quick-attach bucket. Minimum 739 lbs. with a rigid pin-on bucket. Maximum Lift Height: Minimum 70.7 inches clearance (at the pivot pin) to support unloading into utility bins. 5. Safety, Tires, and Dimensional Constraints: Operator Safety: Must include a standard, folding Roll-Over Protective Structure (ROPS). Tire Package: Must be equipped with heavy-duty, low-impact Turf Tires to prevent turf destruction. Standard agricultural or industrial tires are not acceptable. Weight Profile: Tractor dry weight (with ROPS, excluding loader attachment) must fall strictly within 1,430 to 1,445 lbs. to prevent field compaction. Turning Radius: Turning radius must be 7.5 feet or less (without brakes applied) to navigate restricted environments. Delivery Destination: FOB Destination. Assembly: Equipment must be delivered fully assembled, serviced, fluids topped off, and ready for immediate operation upon receipt.
44%
Combined Synopsis08/07/2026
Tractor
44%
Combined Synopsis07/24/2026
2026 John Deere 8R 340 Cabbed Tractor Like/Or Equal with Degelman 5900-12 Blade Like/Or Equal with Trade-in. 340 Engine Horsepower Front Wheeled Drive Cabbed Tractor with 12 foot Blade (Attached pdf Specifications document must be filled out, signed and met/exceeded to be considered. TO INCLUDE: Trade-in of 2014 John Deere 8320R with 2014 Degelman 12-5900 Blade, as seen in attached pictures. JD 8320R Serial #1RW8320RCEP095543 and Degelman 12-5900 Serial #DOZ28433 is included. (*Make sure to deduct the trade-in value from your quote.)
44%
Combined Synopsis05/27/2026

Additional Details

Solicitation Number

12405B21Q0060

Archive Date

Jul 16, 2021

Office Address

STONEVILLE, MS, 38776