GovChime
Notice ID: 8b674840c0704482ae4be58c25dfba00Combined Synopsis/Solicitation

KIOTI TRACTOR - DK6020SECH, or comparable

Archived on February 17, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM UTC−05:00
Posted
January 29, 2024
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
333111: Farm Machinery and Equipment Manufacturing
Agency
Department of AgricultureAGRICULTURAL RESEARCH SERVICE

Notice details

Office
USDA ARS SEA AAO ACQ/PER PROP
Place of performance
Mayaguez, PR, 00680
Last updated
Dec 4, 2025

Identifiers

Solicitation number
12405B24Q0072
Notice ID
8b674840c0704482ae4be58c25dfba00

Description

This is a combined synopsis/solicitation for commercial goods and commercial services prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation will not be issued. The solicitation number is 12405B24Q0072 and is issued as a request for quotation (RFQ). The NAICS code is 333111 - Farm Machinery and Equipment Manufacturing. This solicitation document incorporates those provisions and clauses in effect through Federal Acquisition Circular 2023-06. The USDA, ARS, in Mayaguez, Puerto Rico has a NEW requirement for a 50 65 hp cab tractor. Kioti DK6020SE or comparable, with the following: Engine Horsepower 50-65 PTO Horsepower 40-50 PTO RPMs 540 PTO type / independent 3 point hitch CAT 2 Door to Door delivery to Mayaguez, PR Tractor enclosed Cab AC Cab with Radio 4X4 drivetrain AG tires Wet disk type brakes Overall width 50-60 inches Complete front weight Kit. Any quotes not meeting the minimum specifications will not be considered. Please ensure all email correspondence includes the solicitation number in the subject line. Emails without the RFQ number in the subject line may not be seen, read, and /or reviewed and therefore disqualified from consideration. ITEMS TO BE INCLUDED IN QUOTE: In order to be considered for award Offerors shall provide 1) a Quote on company letterhead, to include: vendors SAM.gov UEI number, detailed item description, unit price per item, total price to include shipping, and valid for at least 60 days after receipt of quote. REJECTION OF QUOTATION: Failure to demonstrate compliance will be cause to reject the quote without further discussions. All responsible sources may submit an offer and will be considered. The following clauses and provisions apply to this acquisition. 52.252-2 Clauses Incorporated by Reference; 52.212-4 CONTRACT TERMS AND CONDITIONS - COMMERCIAL GOODS AND COMMERCIAL SERVICES; 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS - COMMERCIAL GOODS AND COMMERCIAL SERVICES applies,; 52.222-3, Convict Labor; 52.233-3, Protest after award; 52.222-26, Equal Opportunity; 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans; 52.222-36, Affirmative Action for Workers with Disabilities; 52.222-37, Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans; 52.222-19, Child Labor - Cooperation with Authorities and Remedies; 52.223-2 Affirmative Procurement of Biobased Products Under Service and Construction Contracts; 52.223-15 Energy Efficiency in Energy-Consuming Products; 52.223-17 Affirmative Procurement of EPA-designated Items in Service and Construction Contracts; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer - System for Award Management; applicable to this acquisition; 52.252-1 Solicitation Provisions Incorporated by Reference; 52.212-1 INSTRUCTIONS TO OFFERORS - COMMERCIAL GOODS AND COMMERCIAL SERVICES; 52.223-1 Biobased Product Certification; 52.223-4 Recovered Materials Certification; 52.212-2 Evaluation-Commercial Products and Commercial Services ; 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS - COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES; 52.217-8 Option to Extend Services. AGAR Clauses 452.211-70 Brand Name or Equal. 425.211-71 Equal Products Offered. 452.204-70 Modification for Contract Closeout As prescribed in USDAs Contracting Desk Book 404.804 and 413.302-5, insert the following clause: MODIFICATION FOR CONTRACT CLOSEOUT (DEVIATION JULY 2022) Upon contract closeout for contracts utilizing Simplified Acquisition Procedures (SAP) according to FAR part 13, (a) If unobligated funds in the amount of $1000 or less remain on the contract, the Contracting Officer (CO) shall issue a unilateral modification for deobligation. The contractor will receive a copy of the modification but will not be required to provide a signature. The CO shall immediately proceed with contract closeout upon completion of the period of performance, receipt and acceptance of supplies or services, and final payment. (b) If unobligated funds of more than $1000 remain on the contract, the CO shall issue a bilateral modification for deobligation. The contractor will receive a copy of the modification and will be required to provide a signature. (The CO may also request a Release of Claims be completed by the contractor, although not required for contract and orders using SAP.) If the bilateral modification and Release of Claims are not returned to the CO within 60 days, the CO shall release the modification as unilateral and proceed with contract closeout upon completion of the period of performance, receipt and acceptance of supplies or services, and final payment. (End of clause) QUOTED PRICE MUST INCLUDE: any delivery costs as well as any applicable duties, brokerage, or customs fees. DELIVERY DUE DATE: The Government requires delivery on or before 30 ARO, however, each offeror shall include their proposed delivery schedule as part of their quotation. PAYMENT: Any award made under this solicitation is subject to 31 CFR Part 208 which requires all payments made by the government to be made by electronic funds transfer. Contractors intending to conduct business with the Federal Government MUST register with the System for Award Management (SAM) database prior to submitting quotation. You may register online at www.sam.gov. Any amendment and documents related to this procurement will be available electronically at the Internet site: http://www.SAM.gov. FAR 52.212-2, Evaluation-Commercial Products and Commercial Services, the significant evaluation factors, in the relative order of importance, are (i) technical capability of the item offered to meet the Government requirement including delivery date; (ii) past performance; and (iii) price, based on F.O.B. Destination. Award will be made based on overall BEST VALUE to the Government. The government anticipates award of a firm fixed priced contract resulting from this solicitation to the responsible offeror whose offer conforms to the specifications that will be the most advantageous to the government in accordance with FAR 13.106-2. Responses shall include technical specifications, descriptive material and capabilities of the offerors equipment. Offerors shall identity where the offered item meets or does not meet each of the Government's functional and performance minimum specifications listed herein. QUESTIONS REGARDING THIS RFQ ARE DUE TO RICHARD HAWTHORNE at Richard.hawthorne@usda.gov, NO LATER THAN 1:00 p. m. ET, February 1, 2024. Questions will only be accepted via email and WILL NOT be answered if received after this date/time. QUOTES REGARDING THIS RFQ ARE DUE TO RICHARD HAWTHORNE at Richard.hawthorne@usda.gov , NO LATER THAN 5:00 p. m. ET, February 2, 2024. Place of Performance: USDA-ARS 2200 Pedro Albizu campos Ave Suite 201 Mayaguez, PR, 00680 Primary Point of Contact: Richard Hawthorne Purchasing Agent richard.hawthorne@usda.gov.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:12405B24Q0072
  1. Combined Synopsis
  1. Combined SynopsisCurrentJan 29, 2024

    KIOTI TRACTOR - DK6020SECH, or comparable

    Notice 8b674840c0704482ae4be58c25dfba00 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
(1) Engine and Performance Min Requirements: (a.) Rated Engine Power: 180hp (b.) Maximum Engine Power: 195hp. (c.) Engine Configuration: 6.8 L, six-cylinder turbocharger. (d.) Turbocharger: Variable-geometry turbocharger. (e.) Intelligent Power Management: Up to 20ho boost for transport and non-stationary power take-off (PTO) applications. (f.) Selected Transmission: PowerQuad Plus; 20 forward / 20 reverse speeds. (g.) Maximum Transport Speed: 40 km/h (25 mph). (2) Wheel, Tire, and Axle Configuration: Designed with single front wheels for optimized turning radius, paired with dual rear wheels for maximum pulling traction. (a.) Rear Axle Setup: Dual (Double) Wheels. (b.) Rear Tire Size: 480/80R50 OR 480/80R46 (Duals on each side). (c.) Front Axle Setup: Single Wheels. (d.) Front Tire Size: 420-85R34 or 420/85R30 (single on each side). (e.) Rear Axle Dimension: R and P rear axle - 3.62 in. x 100. in. (f.) Front Axle Type: Unsuspended 4ED front axle or Triple Link Suspension (TLS) front axle (if available and required). (g.) Rear Rims: Adjustable cast wheels. (h.) Front Rims: Adjustable steel wheels. (3) Dimensions, Weight, and Ballasting: (a.) Wheelbase: 2,800 mm (110.2 in.) (b.) Drive Configuration: Mechanical front-wheel drive (MFWD)/4WD. (c.) Front Base Weight: 243 lbs. (d.) Additional Ballast: Quick attach and removal weights/ 1,706 lbs. total ballast. (4) Hydraulic, Hitch, and PTO Systems (min requirements): (a.) Hydraulic System: Pressure-and flow-compensated (PFC) closed-loop system. (b.) Hydraulic Pump Capacity: 114 L/min. (c.) Rear Selective Control Valves: As required for mission equipment. (d.) Rear PTO: Dual-speed 540/1,000 rpm. (e.) Rear Hitch: Category 3 3-point hitch. (f.) Center Link: Category 3 center link with ball end. (g.) Draft Links: Draft links with telescopic ball ends. (h.) Stabilizers: Stabilizer sway-control blocks. (5) Cab, Comfort, and Precision Ag Features: (a.) Cab Type: Enclosed cab with mechanical cab suspension. (b.) Operator Features: Passenger seat, 3-pin power socket, internal rear-view mirror, manually telescoping exterior mirrors, and rear-hitch remote control. (c.) Lighting Package: Economy lighting package with beacon light. (d.) Precision Agriculture Features: G5 Command Center display, StarFire receiver, and telematics connectivity (if required)
-Combined Synopsis11/24/2026
Item: Sub-Compact Utility Tractor with Front Loader and Turf Tire Package. Brand Name: Kubota BX2380 Sub-Compact Utility Tractor package configured with a frontend loader (Kubota LA344 or equal) and heavy duty turf-safe tires. Salient Characteristics: Requirement for the procurement of a brand-name-or-equal Kubota BX2380 Sub-Compact Utility Tractor package configured with a front-end loader (Kubota LA344 or equal) and heavy-duty turf-safe tires. This utility tractor is required for groundskeeping and landscape maintenance in tight, confined spaces where standardcompact tractors are too large or heavy, risking structural damage to manicured turf and fields. Salient Characteristics: 1. Engine and Power Specifications: Engine Type: Must be a liquid-cooled, 3-cylinder diesel engine. Engine Output: Minimum 21.6 Gross Horsepower (HP) (rated up to 23.0 Gross HP). Power Take-Off (PTO) System: Must feature a standard Live Independent PTO. Rear PTO Speed: Must feature a 540 RPM speed threshold. Mid PTO Speed: Must feature a 2500 RPM speed threshold (supporting mid-mount mower compatibility). PTO Horsepower: Minimum 17.7 HP at the PTO shaft. 2. Drivetrain and Hydrostatic Transmission: Drivetrain: Must feature true Four-Wheel Drive (4WD / 4x4) with a standard operator-controlled rear differential lock. Transmission Type: Must feature a Hydrostatic Transmission (HST) with a high-low gear shift (minimum of 2 forward / 2 reverse speed ranges). Braking System: Must feature maintenance-free, wet disc brakes. Steering: Must feature hydrostatic power steering. 3. Hydraulic and 3-Point Hitch Capabilities: Hydraulic Pump Output: Must feature a minimum 6.0 Gallons Per Minute (GPM) pump flow capacity. 3-Point Hitch Type: Must feature an SAE Category I rear three-point hitch. Hitch Lift Capacity: Minimum 680 lbs. lift capacity measured 24 inches behind the lift points (pins). 4. Front Loader Attachment Specifications: Loader Integration: Must accept a factory-matched, quick-mount front-end loader. Bucket Style: Loader bucket must support two-lever quick-attach or pin-on configurations. Hydraulic Couplers: Must feature flat-faced, no-spill hydraulic couplers to prevent oil leakage during attachment swaps. Loader Lift Capacity: Minimum 613 lbs. at maximum height (measured at the pivot pin) with a quick-attach bucket. Minimum 739 lbs. with a rigid pin-on bucket. Maximum Lift Height: Minimum 70.7 inches clearance (at the pivot pin) to support unloading into utility bins. 5. Safety, Tires, and Dimensional Constraints: Operator Safety: Must include a standard, folding Roll-Over Protective Structure (ROPS). Tire Package: Must be equipped with heavy-duty, low-impact Turf Tires to prevent turf destruction. Standard agricultural or industrial tires are not acceptable. Weight Profile: Tractor dry weight (with ROPS, excluding loader attachment) must fall strictly within 1,430 to 1,445 lbs. to prevent field compaction. Turning Radius: Turning radius must be 7.5 feet or less (without brakes applied) to navigate restricted environments. Delivery Destination: FOB Destination. Assembly: Equipment must be delivered fully assembled, serviced, fluids topped off, and ready for immediate operation upon receipt.
-Combined Synopsis08/07/2026
Tractor
-Combined Synopsis07/24/2026
2026 John Deere 8R 340 Cabbed Tractor Like/Or Equal with Degelman 5900-12 Blade Like/Or Equal with Trade-in. 340 Engine Horsepower Front Wheeled Drive Cabbed Tractor with 12 foot Blade (Attached pdf Specifications document must be filled out, signed and met/exceeded to be considered. TO INCLUDE: Trade-in of 2014 John Deere 8320R with 2014 Degelman 12-5900 Blade, as seen in attached pictures. JD 8320R Serial #1RW8320RCEP095543 and Degelman 12-5900 Serial #DOZ28433 is included. (*Make sure to deduct the trade-in value from your quote.)
-Combined Synopsis05/27/2026
Reason for amendment is to correct and clarify that we are looking for a loader package with the tractor. John Deere 6M130 Cab Tractor with Heat/AC, Wipers, Mirror, 4 Wheel Drive, and Loader Kit. MUST be able take a trade-in of a 6430 John Deere tractor with loader attached. Tractor has 1576.2 hours on the dash.
-Combined Synopsis04/10/2026

Additional Details

Solicitation Number

12405B24Q0072

Archive Date

Feb 17, 2024

Office Address

STONEVILLE, MS, 38776