Notice ID: 778a5f063a9447f5bf07f55bbd6e650cCombined Synopsis/Solicitation
BOX COMPRESSION TESTER
Archived on September 26, 2023. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 2:00 PM UTC−05:00
- Posted
- August 9, 2023
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Small Business Set Aside - Total
- NAICS
- 334519: Other Measuring and Controlling Device Manufacturing
- Agency
- Department of AgricultureFOREST SERVICE
Notice details
- Office
- USDA-FS, CSA EAST 9
- Place of performance
- Madison, 53726
- Last updated
- Sep 25, 2026
Identifiers
- Solicitation number
- 12444823Q0041
- Notice ID
- 778a5f063a9447f5bf07f55bbd6e650c
Description
Solicitation Number: 12444823Q0041 This solicitation is issued as a Request for Quote (RFQ). FAR Part 13, Simplified Acquisitions Procedures, will be used. A contractor may be eliminated from consideration without further exchanges if technical and/or pricing proposals are not among those Offerors considered most advantageous to the Government. This solicitation is 100% set-aside for total small businesses associated with NAICS 334519, size standard 500 employees . This solicitation will result in a Firm-Fixed Price contract to a single offeror determined to be responsive and responsible. Offeror must be registered in the System for Award Management (SAM) website: https://sam.gov. If at the time of award an Offeror is not actively and successfully registered in the SAM database, the Government reserves the right to award to the next prospective Offeror. The solicitation document and incorporated provisions and clauses are those in effect through the date of posting. It is the Offeror's responsibility to be familiar with applicable clauses and provisions. Clauses and provisions can be found at https://www.acquisition.gov/content/part-52-solicitation-provisions-and-contract-clauses. MUST provide a completed copy of the provision at 52.212-3, Offeror Representations and Certifications – Commercial Items with your offer. Any questions regarding this solicitation shall be emailed to Purchasing Agent/Contract Specialist Susan Davis at susan.a.davis@usda.gov no later than 9/11/23. 2:00 pm CST. Telephonic (verbal) questions will not be addressed. Questions submitted after this date may not be accepted. The proposed contract will be awarded to the Offeror that represents the Lowest Price Technically Acceptable (LPTA) and meets technical requirements. HOW TO SUBMIT OFFER: Telephone, faxed or in person/mail delivery of offers will not be accepted. Offers are due via e-mail no later than 9/11/23, 2:00 pm CST. It is the Offeror’s responsibility to verify offer was received. Offer received after the due date and time shall not be considered. Send e-mail to Purchasing Agent/Contract Specialist _Susan Davis, at _susan.a.davis@usda.gov Amendments, if any, to this solicitation will be posted through Contract Opportunities on https://sam.gov. Paper copies of the amendments will NOT be individually mailed. By registering to receive notifications on https://sam.gov, offerors will be notified by email of any new amendments that have been issued. No other notification of amendments will be provided. Potential Offerors are advised that they are responsible for obtaining and acknowledging any amendments to the solicitation. FAILURE to acknowledge an amendment may result in your offer being considered unacceptable. The Government intends to select one contractor for this acquisition. However, the Government reserves the right not to award a contract at all, depending on the quality of the offers and prices submitted and the availability of funds. Rejection of Unreasonable Offers: The Government may reject any offer that is evaluated to be unreasonable in terms of program commitments, including contract terms and conditions, or unreasonably high or low in cost when compared to Government estimates, such that the offer is deemed to reflect an inherent lack of competence or failure to comprehend the complexity and risks of the program. Each response must clearly indicate the capability of the Offeror to meet all specifications and requirements. When submitting an offer it is very important that all offerors understand it is their responsibility to ensure they meet all requirements of the RFQ, not just those requirements stated in the specification such as terms and conditions, representations and certifications. The offer should not simply rephrase or restate the Government’s requirements, but rather shall provide substantiation as to how the offeror intends to meet the requirements. Offers will ONLY be accepted via e-mail. All other offers will be rejected.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
Solicitation:
12444823Q0041- Combined Synopsis
- Combined SynopsisCurrentAug 9, 2023
BOX COMPRESSION TESTER
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Supply and Deliver six (6) heat flux transducers for fire research applications, including water‑cooled radiant and total flux sensors meeting the specifications in the attached Statement of Work. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued. Solicitation number 1240BE27Q0015 is issued as a Request for Quotation (RFQ) for heat flux transducers used in fire research. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 334519 The small business size standard is 600 employees. This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency. | - | Combined Synopsis | 11/06/2026 |
This is a Brand Name requirement for APCRBC140 replacement battery cartridges from APC by Schneider Electric. See the attached Specifications, Brand name justification, and RFQ document for full details of the requirement. ALL OFFERORS (i.e. the vendor that will receive the award payment) MUST PROVIDE PROOF OF PRICING FROM THE MANUFACTURER, AND CONFIRM AUTHORIZATION (from the original equipment manuafacturer)TO RESELL THE ITEMS LISTED IN THE STATEMENT OF WORK TO BE CONSIDERED FOR AWARD. Partial quotes will not be accepted. All correspondence must reference the notice ID in the subject line to ensure visibility. | - | Combined Synopsis | 11/09/2026 |
Pre-Solicitation Notice for the notice of intent to award a sole source contract. This is not a solicitation. The Veterans Health Administration (VHA), Office of Research and Development (R&D), Regional Procurement Office (RPO) – East in Pittsburgh, PA intends to negotiate on a sole source basis for Avidity Science Bottle Filling Station to replace the current Avidity Edstrom Model BFS-675 Bottle Filling Station for Research Services at the Michael E. DeBakey VA Medical Center that is twenty years old and reached the end of its life expectancy. The facility requires the replacement to be the same size and same make/model to utilize the existing space, power hookups, drain, and water inlet valve without new construction or abatement. The Avidity Science Bottle Filling Station consists of: Edstrom Model BFS-675 Bottle Filling Station Made in the USA Frame and cabinet components constructed of 316 stainless steel Corrosion resistant wetted parts compatible with untreated, purified, acidified & chlorinated water Able to chlorinate, acidify or medicate bottled water for animals Adjustable, no drip fill nozzles to ensure uniform filling Interchangeable custom designed fill manifold for multiple size bottles Two user programmable fill times for two different bottle sizes Removable sidewall allows loading cases from conveyor feed systems Solution and injection tank located on sides for easy access Solution tank has screw-on lid to prevent spills Mixing chamber assures complete dispersal of chemical additives Optional pH monitor available for acidification application Separate stainless-steel platform for reservoir tank mounts on either side Discharge capacity: 1000 to1200 ML/min per dispensing nozzle Removal of old unit Installation of the same model This notice of intent is not a request for competitive quotes. However, any responsible source who can provide an equivalent service with the features described above, and who is the Original Equipment Manufacturer (OEM), authorized dealer, authorized distributor, or authorized reseller of all the items listed above, may submit a capability statement to the contracting office no later than September 14, 2026, 2:00 PM, MT. Interest/capability statements which specifically detail how your equipment meets the requirement may be sent to Robert.Dobson1@va.gov. No telephone responses will be accepted. A determination not to compete the proposed requirement based upon the responses to this notice is solely within the discretion of the Government | - | Special Notice | 09/23/2026 |
The primary purpose of this requirement is to provide support for the quantitative and technical analysis of the chemical constituents of fruit fly lures and attractants. The objectives are as follows: Provide chemical data, analysis and recommendations to assure trap and lure contract performance and quality assurance. Provide chemical data for the development of new fruit fly detection tools and strategies for continued program improvement. Participate in contract Statement of Work criteria development for new contracts awarded to lure manufacturers. | - | Pre-Solicitation | 11/25/2026 |
PURPOSE: The purpose of the sources sought is to identify available authorized businesses to replace a Door Control Unit at Fairchild AFB. This sources sought notice is for informational and planning purposes only. Pricing information is not being requested at this time. It does not constitute a solicitation and is not to be considered as a commitment by the government. REQUIREMENT: This notice is issued by the U.S. Air Force, 92d Contracting Squadron, Fairchild AFB, WA. This sources sought is seeking to identify responsible potential sources to all necessary labor, tools, equipment and materials to purchase, remove/replace, program, and test the primary internal logic controller unit for the Albany UltraFast high-speed commercial roll-up door, to include the controls, hardware and electrical system connections at Building 1009 on Fairchild AFB, WA.. The replacement control unit must meet the specifications in accordance with the attached Statement of Work (DRAFT). ANTICIPATED NAICS/SIZE STANDARD: This requirement falls under the NAICS Code of 334519, Other Measuring and Controlling Device Manufacturing, a size standard of 600 Employees. SUBMISSION OF INFORMATION: All firms responding to this sources sought notice are advised that their response to this notice is not a request that will be considered for contract award. All interested parties will be required to respond to the resultant solicitation separately from their response to this sources sought notice. A responsible potential source shall have registered with the System for Award Management (SAM). The response should be no more than five pages providing the following information: Specifications of the Door Control Unit replacement services Provide feedback on what areas of the Statement of Work (DRAFT) your company can complete and areas your company cannot complete Business name, address, CAGE code Size and socioeconomic classification based on NAICS size standard If claiming a specific small business category, provide supporting documentation Point of contact including email and phone number Please respond to this request by 20 November 2026 at 10:00 AM Pacific Time Attachment 1: FA462027QC002 SOW (DRAFT) | - | Market Research | 11/20/2026 |
Additional Details
Solicitation Number
12444823Q0041
Archive Date
Sep 26, 2023
Office Address
Atlanta, GA, 303092449