Notice ID: 81d2a1e6bfb36a7c057c4cff3bd8cb4eCombined Synopsis/Solicitation
Outdoor standalone seedling cooler for the Homochitto Ranger District Work Center, National Forests in Mississippi
Archived on November 8, 2018. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 3:00 PM UTC−06:00
- Posted
- September 6, 2018
- Notice type
- Combined Synopsis/Solicitation
- NAICS
- 333415: Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing
- Agency
- Department of AgricultureFOREST SERVICE
Notice details
- Office
- NATIONAL FORESTS IN MISSISSIPPI
- Place of performance
- Homochitto Ranger District 1200 HWY 184 E, Meadville, MS, 39653-9702
- PSC
- 41: REFRIG, AIR CONDIT/CIRCULAT EQPT
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- 12447U18Q0017
- Notice ID
- 81d2a1e6bfb36a7c057c4cff3bd8cb4e
Description
Specifications for Outdoor Standalone Cooler for the Storage of Tree Seedlings Background Information: For long-term storage of tree seedlings, we require refrigerated storage unit that can maintain the trees at temperatures of 33 to 34 F. The basic design of these coolers is fairly straightforward. The system has several evaporators with a hot gas bypass defrost. The evaporators are on different defrost cycles. When one evaporator is defrosting, its fan is off, and the hot gas melts the ice off the coils quickly. Meanwhile, another evaporator is operating, maintaining the temperature of the cooler. Ordinary coolers are not acceptable for long-term storage of tree stock because of the long defrost cycles. Specifications: 1. Remove existing 19 foot 3 inch x 19 foot 3 inch outdoor standalone cooler including the refrigeration unit and dispose of off of Forest Service property. 2. Insulation values for cooler should be a minimum of R25 and the cooler shall be airtight. 3. Panels shall consist of interior and exterior metal skins with foam between panels. The foam and skin shall have superior adhesion to each other. Panel edges should have a locking mechanism with a flexible gasket material on the interior and exterior edges of the panel. 4. Joined panels shall form rigid joints. 5. Exterior finish shall be an aluminum product. 6. Interior finish shall be an aluminum product. 7. Seedling Cooler Dimensions a. Length is a minimum of 19 feet 3 inches with a maximum of 20 feet (length of existing concrete slab). b. Width is a minimum of 19 feet 3 inches with a maximum of 20 feet (length of existing concrete slab). c. Height is a minimum of 8 feet. 8. Floor type is the bare concrete foundation. 9. One door shall be installed with a minimum of 78" high and 60" wide. A minimum of 3 hinges shall support the door. A deadbolt security handle latch with sliding deadbolt and inside safety release or equivalent shall be installed. Gaskets shall be replaceable and resistant to damage from oil, water, and detergent. 10. Minimum of two 48" long LED light shall be installed inside of cooler with a switch mounted on outside of the door to the cooler. A weatherproof cover shall protect the switch. 11. A temperature gauge shall be located on the outside of the cooler, so the temperature can be monitored without opening the door. 12. Installation and operating manuals shall be provided upon delivery of the cooler. 13. A warranty shall be given on the panels (including sides, roof, and floor), mechanical (including hardware, and gaskets, etc.), electrical components, and refrigeration system.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
12447U18Q0017- Combined Synopsis
- 3×Combined SynopsisCurrentAug 27, 2018
Outdoor standalone seedling cooler for the Homochitto Ranger District Work Center, National Forests in Mississippi
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Additional Details
Solicitation Number
12447U18Q0017
Archive Date
Nov 8, 2018
Office Address
JACKSON, MS, 39213