Notice ID: 5652a28cf57449a1ad6908bd4f1f52e2Combined Synopsis/Solicitation
Fixed high wing monoplane
Archived on July 28, 2022. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 1:30 PM UTC−05:00
- Posted
- June 28, 2022
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Small Business Set Aside - Total
- Agency
- Department of AgricultureANIMAL AND PLANT HEALTH INSPECTION SERVICE
Notice details
- Office
- MRPBS MINNEAPOLIS MN
- Last updated
- Sep 25, 2026
Identifiers
- Solicitation number
- 12639522Q0203
- Notice ID
- 5652a28cf57449a1ad6908bd4f1f52e2
Description
1. This is a combined synopsis/solicitation for commercial services- prepared in accordance with Federal Acquisition Regulation (FAR) 12 and Part 13 and supplemental information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This combined synopsis/solicitation will result in a firm fixed price commercial supply contract. 2. The solicitation number for this effort is 12639522Q0203 and this combined synopsis/solicitation is issued as a request for quotation (RFQ). 3. The provisions and clauses incorporated into this solicitation document are those in effect at the time of publication. Provisions and clauses incorporated by reference have the same force and effect as if they were given in full text. The full text of the Federal Acquisition Regulation (FAR) can be accessed on the Internet at http://farsite.hill.af.mil/ 4. Simplified acquisition procedures will be used for this acquisition per Federal Acquisition Regulation (FAR) Part 13. This requirement is being offered as a Small Business Set-Aside. The NAICS code is 336411. The small business size standard is 1,500 employees. 5. This requirement is for the United States Department of Agriculture (USDA), Animal Plant Health Inspection Service (APHIS), Wildlife Service (WS) in Cedar City, UT. 6. REQUIREMENTS AND QUANTITIES: Two (2) fixed high wing, single engine aircraft with option to purchase up to three additional aircraft, see attached for minimum requirements. 7. The period of performance will be award through five years from award. 8. The provision at 52.212-1 Instructions to Offerors - Commercial applies to this solicitation. 9. Award will be made to the responsible offeror whose quote conforming to this combined synopsis/solicitation will be most advantageous to the Government, price, technical capability, past performance, and other factors considered. A trade off process will be used to evaluate quotes. Technical capability such as quality/performance of the aircraft to fit the needs of the Government. Aircraft will be used for aerial predator management. 10. The provision 52.212-3 Offeror Representations and Certifications - Commercial Items (Nov 2021) applies to this solicitation. The contractor shall either complete the on-line Offeror Representations and Certifications www.SAM.gov or return a completed copy of the Offeror Representations and Certifications with their quotation. 11. The clause at 52.212-4 Contract Terms and Conditions - Commercial Items applies to this acquisition. 12. The clause at 52.212-5 Contract Terms and Conditions Required To Implement Statutes Or Executive Orders Commercial Items, applies to this acquisition. The following FAR clauses identified in FAR 52.212-5 are considered checked and are applicable to this acquisition; __ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) ( 41 U.S.C. 4704 and 10 U.S.C. 2402). __ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note). __ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Nov 2021) ( 31 U.S.C. 6101 note). __ (14) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) ( 15 U.S.C. 644). __ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) ( 15 U.S.C. 637(d)(2) and(3)). __ (19) 52.219-14, Limitations on Subcontracting (Sep 2021) ( 15 U.S.C. 637s). __ (22) 52.219-28, Post Award Small Business Program Rerepresentation (Sep 2021) ( 15 U.S.C. 632(a)(2)). __ (27) 52.222-3, Convict Labor (Jun 2003) (E.O.11755). __ (28) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2022) (E.O.13126). __ (29) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). __ (30) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246). __ (31) 52.222-35, Equal Opportunity for Veterans (Jun 2020) ( 38 U.S.C. 4212). __ (32) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) ( 29 U.S.C. 793). __ (33) 52.222-37, Employment Reports on Veterans (Jun 2020) ( 38 U.S.C. 4212). __ (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). __ (35) 52.222-50, Combating Trafficking in Persons (Nov 2021) ( 22 U.S.C. chapter 78 and E.O. 13627). __ (36) 52.222-54, Employment Eligibility Verification (May 2022) (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.) __ (48) 52.225-1, Buy American-Supplies (Nov 2021) ( 41 U.S.C. chapter 83). __ (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). __ (58) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) ( 31 U.S.C. 3332). 13. To be awarded this contract, the offeror must be registered in the beta.SAM.gov. SAM.gov information may be found at http://www.SAM.gov. 14. Quotations are due by 01:30 PM cen. July 13, 2022. Quotes may be sent via e-mail to Jason.l.wilking@usda.gov.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
No documents available.
Lifecycle
Solicitation:
12639522Q0203- Combined Synopsis
- Combined SynopsisCurrentJun 28, 2022
Fixed high wing monoplane
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This Synopsis serves as a notice of intent that the C-130 Mobility Aircraft Contracting Branch, AFLCMC/WLNK, at Robins Air Force Base, GA, anticipates issuing a Request for Proposal (RFP) on SAM.gov under Notice ID FA8504-26-R-B005 for the C-130H Center Wing Box). This effort requires the Enhanced Service Life (ESL) Center Wing Box (CWB) kits for the C-130 Center Wing Box (CWB) program. Component Kits of supplies: AF92-1454 1560K0100076RLG, P/N 3365000-31 1560K0100076VLG, P/N 3365000-51 AF92-1532 1560K0100076RLG, P/N 3365000-31 1560K0100076VLG, P/N 3365000-51 AF93-7311 1560K0100076ALG, P/N 3365000-1 1560K0100076VLG, P/N 3365000-51 AF94-7315 1560K0100076TLG, P/N 3365000-35 1560K0100076VLG, P/N 3365000-51 AF94-7316 1560K0100076TLG, P/N 3365000-35 1560K0100076VLG, P/N 3365000-51 AF94-7318 1560K0100076TLG, P/N 3365000-35 1560K0100076VLG, P/N 3365000-51 AF94-7319 1560K0100076TLG, P/N 3365000-35 1560K0100076VLG, P/N 3365000-51 AF94-7320 1560K0100076TLG, P/N 3365000-35 1560K0100076VLG, P/N 3365000-51 AF94-7321 1560K0100076TLG, P/N 3365000-35 1560K0100076VLG, P/N 3365000-5 This acquisition will be Sole Source (Other than Full and Open Competition) to: Lockheed Martin Corporation (CAGE Code 98897) Lockheed Martin Aeronautics Company (LMAC) 86 South Cobb Drive SE Marietta, GA 30063 CAGE Code: 98897 The statutory authority permitting other than full and open competition is FAR 6.103-1 – 10 U.S.C. 3204(a)(1), Only One Responsible Source - No Other Supplies or Services Will Satisfy Agency Requirements. The North American Industry Classification System Code (NAICS) for this requirement is 336411, Other Electronic Component Manufacturing, with a corresponding small business size standard of 1500 employees, and Product and Service Code (PSC) 1510. This acquisition will result in the award of a follow-on contract with the majority being a Firm-Fixed Price (FFP) definitive quantity contract. There shall also be Cost Reimbursable – No Fee (CRNF) contract line items (CLINs) for Travel and Over and Above. This contract will include a five (5) year period of performance (PoP) consisting of a one (1) year basic period and four (4) one (1) year options (Options I to IV). (in accordance with FAR 52.217-9, Option to Extend the Term of the Contract) and Option to Extend Services, FAR 52.217-8. The approximate Request for Proposal (RFP) issue date is FY26 Q3. In accordance with FAR 5.101(c)(4)(vi) all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. Drawing packages defining CWB kits for the affected aircraft were developed at Government expense under previous contracts, so the USG retains Unlimited Data Rights to the CWB kit Technical Data Packages (TDPs) Foreign Participation is not permitted. All comments, recommendations, concerns, and questions in regards to this notice should be submitted to the PCO, Oya Harrison, oya.harrison.1@us.af.mil and the Contract Specialist Brontavious Harris, brontavious.harris@us.af.mil & Moneka Johnson, moneka.johnson@us.af.mil | 72% | Pre-Solicitation | 04/24/2026 |
This is a Request for Proposal for the Center Wing Box. This effort requires the Enhanced Service Life (ESL) Center Wing Box (CWB) kits for the C-130 Center Wing Box (CWB) program. The North American Industry Classification System Code (NAICS) for this requirement is 336411, Other Electronic Component Manufacturing, with a corresponding small business size standard of 1500 employees, and Product and Service Code (PSC) 1510. This acquisition will result in the award of a Definitive C-Type contract with Firm Fixed Priced and Cost Reimbursement – No Fee (CRNF) contract line items (CLINs). This contract will include a five (5) year period of performance (PoP) consisting of a one (1) year basic period and four (4) one (1) year options (Options I to IV). (in accordance with RFO 52.217-9, Option to Extend the Term of the Contract). This acquisition will be Sole Source (Other than Full and Open Competition) to: Lockheed Martin Corporation (CAGE Code 98897) Lockheed Martin Aeronautics Company (LMAC) 86 South Cobb Drive SE Marietta, GA 30063 CAGE Code: 98897 The statutory authority permitting other than full and open competition is RFO 6.103-1 – 10 U.S.C. 3204(a)(1), Only One Responsible Source - No Other Supplies or Services Will Satisfy Agency Requirements. All comments, recommendations, concerns, and questions in regards to this notice should be submitted to the PCO, Oya Harrison, oya.harrison.1@us.af.mil and the Contract Specialist Brontavious Harris, brontavious.harris@us.af.mil & Moneka Johnson, moneka.johnson@us.af.mil | 67% | Solicitation | 09/21/2026 |
The F-35 Lightning II Joint Program Office (JPO) intends to award a sole-source contract to Lockheed Martin Corporation, Lockheed Martin Aeronautics Company (LM Aero), Fort Worth, Texas, for F-35 non-recurring sustainment support. The scope being procured under the Depot, Intermediate Level, and Non-Recurring Engineering (DINRE) contract includes: Depot Activation; Intermediate-level Maintenance; Sustainment Non-Recurring Engineering Efforts; Reliability, Maintainability, and Health Maturation; Structural Integrity Program and Low Observable Maturation; Structural Integrity Program and Low Observable Maturation; Depot Analysis, Planning, and Implementation; Depot Material Lay-In (MLI); Depot Material Activation; Depot Test Systems Development and Support; eCASS (electronic consolidated automated support system) Repair, Test, and Check; Depot-specific Support Equipment (SE); Maintenance Plan Change (MPC) project opportunities; and organic software maintenance support capabilities. This acquisition is being pursued on a sole-source basis under the statutory authority of 10 U.S.C. 3204(a)(1) (formerly 10 U.S.C. 2304(c)(1)), as implemented by FAR 6.302-1, "Only one responsible source and no other supplies or services will satisfy agency requirements." LM Aero is the original designer, developer, and manufacturer of the F-35 aircraft and is the only source with the capabilities required to provide sustainment support for F-35 aircraft. LM Aero solely possesses the proprietary design knowledge, technical data rights, and engineering capabilities required to perform this highly specialized work. Because the DINRE contract represents an integrated, highly complex requirement of non-recurring activations and engineering efforts, breaking out individual activation tasks, regional depot lines, or test program sets to alternate vendors is economically and operationally impracticable. Attempting to segregate these tasks would require the Government to duplicate massive, cost-prohibitive systems-engineering overhead and fund redundant tooling. Furthermore, separating technical responsibility across multiple contractors would introduce severe integration risks, void OEM performance warranties, and delay critical organic depot stand-ups, directly degrading fleet-wide mission-capable rates. The DINRE FY30–34 contract is anticipated to be awarded during FY30, supporting the U.S. Services, Cooperative Program Partners, and Foreign Military Sales (FMS) Customers. This notice of intent is neither a request for proposal nor a solicitation of offers. However, in accordance with FAR 5.207(c)(16)(ii), all responsible sources may submit a capability statement, proposal, or quotation that will be considered by the U.S. Government. Based upon any responses to this notice, the U.S. Government reserves the right to process this procurement action on a sole-source basis. For availability of subcontracting opportunities, contact LM Aero. | 57% | Pre-Solicitation | 12/04/2026 |
The Naval Air Systems Command (NAVAIR), on behalf of the F/A-18E/F and EA-18G Program Office (PMA-265), is conducting market research to determine the industrial base’s existing capability and facility capacity to provide supplemental or secondary Service Life Modification (SLM) turnkey capacity for F/A-18E/F Super Hornet and EA-18G Growler aircraft starting in FY29. The Government seeks mature, currently operational—facilities, personnel, processes, tooling, and infrastructure capable of supporting SLM workload. The Government is not seeking conceptual or developmental solutions that would require significant new construction, extensive infrastructure development, or multi-year implementation before becoming operational. The Government currently executes these requirements through a hybrid framework utilizing the Original Equipment Manufacturer (OEM) (The Boeing Company) and a Naval Aviation Enterprise organic depot (Fleet Readiness Center Southwest) under a public private partnership with the OEM. To support long-term strike fighter inventory requirements, the Government is evaluating the availability of additional commercial or second-source depot modification repair overhaul (MRO) capacity. Information submitted in response to this notice will assist the Government in determining its long-term acquisition strategy through 2038, including whether to establish an additional qualified source to supplement the current capacity or maintain the current hybrid framework mentioned above under the authority of FAR 6.103-3(b)(1) (Defense Pricing, Contracting, and Acquisition Policy (DPCAP) Class Deviation (CD) 2026-O0017) / 10 U.S.C. 3204(a)(3)(A) (Industrial Mobilization). PMA-265 anticipates a maximum SLM induction profile of up to 47 aircraft per year across the industrial base. Actual aircraft allocation among available sources may vary based on Fleet requirements, aircraft availability, demonstrated performance, schedule, and available capacity. 1. Scope of Interest The Government is seeking information on industry capability to perform the SLM workload to supplement current capacity, including but not limited to: Aircraft induction, preservation, inspection, and documentation; F/A-18E/F and EA-18G SLM Specification Modification work; Installation of applicable Structural Technical Directives (TDs) and Advanced Capability Modifications such as Block III upgrade kits; Procurement and management of all required material, including long-lead material, using corporate approaches that support anticipated year-of-execution requirements and ensure material is available for installation when required; Inspection-based repairs and structural modifications; Manufacturing or sourcing of repair parts and materials, as required; Aircraft systems troubleshooting and functional verification; Aircraft records and database updates; and Support for Functional Check Flights and coordination with Government representatives. The Government recognizes that individual respondents may be capable of supporting only a subset of this work or a limited annual quantity. Responses identifying supplemental capability, secondary capability, or potential teaming arrangements are encouraged. 2. Information Requested Interested firms are requested to provide the following information: I. Company Information Company name, address, point of contact, telephone number, and email address. Business size and applicable socioeconomic status, if any. Relevant experience performing MRO / depot-level maintenance, advanced avionic systems modification, modernization, structural repair, or sustainment work on tactical aircraft. II. Facility Information Location(s) of existing facilities proposed for this effort. Number, type, and dimensions of available aircraft bays or work positions, including usable floor area, hangar-door dimensions, overhead clearance, and any facility limitations. For planning purposes, the aircraft footprint is 45 feet wide by 61 feet long Availability of a suitable runway and airfield support for F/A-18 and EA-18G series aircraft. Current facility utilization and the earliest date capacity could be made available. Access to required security, quality assurance, tooling, material handling, and aircraft-support infrastructure. Current, or ability to obtain, Defense Security Services (DSS) facility clearance of Secret. Consistent with Executive Order 14372, Prioritizing the Warfighter in Defense Contracting, and the USW(A&S) memorandum, Prioritizing the Warfighter and Negotiation of Contractor Facilitation Costs (dated 4 May 2026), respondents shall identify whether they anticipate using their own capital to fund stand-up costs necessary to perform the proposed work and describe any Government support, reimbursement, or other enablers required to establish the proposed capability. III. Capacity and Throughput Maximum number of F/A-18E/F and/or EA-18G aircraft the company could induct and complete annually. Expected induction ramp-up profile by year. Estimated average turnaround time from induction through return to the Fleet. Constraints that may limit throughput, including workforce, facilities, supply chain, engineering support, tooling, or Government-furnished material. Ability to adjust capacity in response to changing Fleet requirements or surge demand. Availability of funds to purchase all material to protect quantity throughput and maintain a stock of consumables to perform repair incidents throughout the modification (such as addressing corrosion), parts managements to include obsolescence and manufacturing parts capability. IV. Technical Capability Experience with F/A-18-series aircraft or comparable military tactical aircraft. Capability to perform structural inspections, repairs, modifications, TD incorporation, Non-destructive Inspections (NDI), wiring/electrical work, and systems troubleshooting. Capability to manufacture repair parts or develop repair procedures when required, using Government- or original equipment manufacturer-provided engineering direction. Ability to manage material procurement, kit installation, consumables, and repair-incident-to-modification requirements. Experience coordinating with the Defense Contract Management Agency (DCMA) or similar Government quality-assurance organizations. Ability to recruit, retain, and sustain sufficient qualified personnel to support anticipated SLM workload, including structural engineering personnel eligible for appointment as Naval Air Systems Command Designated Engineering Representatives (NAVDERs) to support the engineering analysis and disposition of aircraft-specific structural findings within the scope of authority delegated by NAVAIR. Respondents should describe their current and projected staffing capacity; recruitment, retention, and succession approaches; and ability to surge personnel as workload requires. V. Cybersecurity Ability to comply with applicable Department of the Navy, NAVAIR, and Department of War cybersecurity requirements for the protection, handling, storage, transmission, and access of Government information and data in performance of the proposed work. VI. Additional Information Identify any Government support, data, tooling, facilities, training, technical assistance, or other enablers that would be needed to establish or expand SLM capability. Provide any recommended acquisition, phasing, or transition approach that would help establish supplemental capacity while minimizing risk to Fleet readiness. 3. Response Instructions Responses should be limited to ten (10) pages and submitted electronically to jacob.r.heintze.civ@us.navy.mil no later than 3 December 2026. This RFI is issued for market research and planning purposes only. It is not a solicitation, request for proposal, or commitment by the Government to award a contract or reimburse any costs associated with responding. Information received may be used to assess available industry capability, capacity, potential small-business participation, and possible acquisition approaches to provide supplemental or secondary capacity for SLM work on F/A-18E/F Super Hornet and EA-18G Growler aircraft. | 57% | Market Research | 12/03/2026 |
AMD 0009 - Please review Section A of N0001926R1014-0009 for a summary of the changes included within this amendment. // REQUEST FOR PROPOSAL (RFP) Undergraduate Jet Training System (UJTS). Please access the RFP and associated attachments via the PIEE Solicitation Module Link listed within the attachments section of this notice. Related Notice(s) (sam.gov) - 25-0001_UJTS; N00019-26-R-1014 DRAFT REQUEST FOR PROPOSAL (RFP) Undergraduate Jet Training System (UJTS). | 57% | Solicitation | 10/30/2026 |
Additional Details
Solicitation Number
12639522Q0203
Archive Date
Jul 28, 2022
Office Address
MINNEAPOLIS, MN, 55401