Notice ID: 29e02b52b99049b49fc5ab68d336f44dAward NoticeAwarded
Bi-Fold Door for Building 32 - Mandan ND
Awarded on September 2, 2021. Full description on SAM.gov.
Awarded tounder 12805B21P0321 (source: SAM.gov award notice)• $23.6K
Overview
- Posted
- September 3, 2021
- Notice type
- Award Notice
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 332321: Metal Window and Door Manufacturing
- Agency
- Department of AgricultureAGRICULTURAL RESEARCH SERVICE
Notice details
- Office
- USDA ARS PA AAO ACQ/PER PROP
- Place of performance
- Mandan, ND, 58554
- Last updated
- Dec 4, 2025
- Award date
- Sep 2, 2021
- Award amount (SAM.gov award notice)
- $23.6K
Identifiers
- Solicitation number
- 12805B21Q0457
- Notice ID
- 29e02b52b99049b49fc5ab68d336f44d
- Award number (PIID)
- 12805B21P0321
Description
This is a combined synopsis/solicitation for a commercial supply item prepared in accordance with the format in FAR subpart 12.06, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation number is 12805B21Q0457 and is issued as a request for quotation (RFQ). This solicitation document incorporates those provisions and clauses in effect through Federal Acquisition Circular 2021-06. The associated NAICS Code is 332321, size standard 750. The USDA, Agricultural Research Service, Northern Great Plains Agricultural Research Laboratory requires Bi-Fold Door for Building 32. See Attachment 001 for more detail. The Government intends to award a firm fixed price purchase order. The requirements are further detailed in the attached Requirements Document. The DELIVERY ADDRESS is: USDA, ARS, PA, Northern Great Plains Agricultural Research Laboratory 1701 10th Ave SW. Mandan, ND 58554 DOCUMENTS TO BE INCLUDED IN QUOTE: In order to be considered for award, Offerors shall respond by: 1) Submitting a Quote Pricing Document. (a)Pricing document submission indicates acceptance of the noted specifications in Attachment 001. (b)In addition to pricing towards requirement specifications, document information MUST include offeror Quote Reference Number, Quote Expiration Date, Business Name, DUNS #, and Quote Point of Contact (name and email address.) 2) Have an Active SAM.gov registration and complete the Representations in FAR 52.204-54; the Representation and Certification section should also be completed electronically in the System for Award Management (SAM) at www.sam.gov. Any amendment and documents related to this procurement will be available electronically at the Government Point of Entry (sam.gov). FAR clauses 52.212-1, 52.212-2, 52.212-3, 52.212-4 and 52.212-5 (and any addenda to those clauses) are included in the attached clauses and provisions document. Additionally, other contract requirements and terms/conditions can be located in the same document. The Government anticipates award of a contract resulting from this solicitation to the responsible offeror whose quote conforms to the specifications that will be the most advantageous to the Government in accordance with FAR 13.106-2 considering three major areas: technical acceptance, past performance and price. Quotes will be evaluated by performing a comparative evaluation in accordance with FAR 13.106-2(b)(3) quote represents the Lowest Price Technically Available. See attached clauses and provisions document for more details. All sources wishing to quote shall furnish a quotation by 11AM Mountain Time, on or before August 27, 2021. Quotations are to be sent via email to Christopher Turner at christopher.c.turner@usda.gov. Failure to provide the required information in the requested format may result in quotes not being considered for award. Attached Provisions/Clauses apply to this RFQ and any subsequent award.
Award Overview
Award Number
12805B21P0321
Award Amount (SAM.gov award notice)
$23.6K
Award Date
Sep 2, 2021
Awardee
Original Solicitation
Notice ID: 29e02b52b99049b49fc5ab68d336f44d
Posted Date: Sep 3, 2021
Original Response Deadline: Not specified
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
12805B21Q0457- Combined Synopsis
- Awarded
This opportunity has been awarded.
- Combined SynopsisAug 20, 2021
Bi-Fold Door for Building 32 - Mandan ND
- AwardedCurrentSep 3, 2021
Bi-Fold Door for Building 32 - Mandan ND
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued. Solicitation number 1240LP27P0009 is issued as a Request for Quotation (RFQ) for Metal Enclosures. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 332322 Sheet Metal Work Manufacturing. The small business size standard is 500 Employees. This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency. | - | Combined Synopsis | 11/20/2026 |
STATEMENT OF WORK / REQUEST FOR QUOTE A. INTRODUCTION: 1. The Federal Bureau of Prisons (FBOP), FCC Lompoc, 3901 Klein Blvd., Lompoc, CA 93436, is seeking quotes from qualified vendors for the supply and delivery of nine (9) complete fire escape door assemblies, including doors, frames, and all required hardware. The doors are for a prison facility application and must meet all relevant local, state, and federal fire and life safety codes. 2. "Equal or Better" Product Substitution: Proposals must meet or exceed the specified product quality. If an alternative product or component is offered, the vendor must submit all technical documentation, certifications, and test results for consideration. 3. Government's Right of Final Technical Acceptance: The government retains the sole and final authority to determine technical acceptance for all submitted products, based on the provided documentation and compliance with stated standards. B. SCOPE OF WORK: 1. The vendor shall provide all materials as specified below. All components must be new, U.L. Listed or labeled by a recognized testing agency acceptable to the Authority Having Jurisdiction (AHJ) and conform to the standards referenced herein. C. TECHNICAL SPECIFICATIONS: TABLE 1: COMPONENTS: All units shall be identical unless otherwise noted. Component Requirement Quantity 9 Complete Door Assemblies Door Size 36" wide x 80" high x 2" thick Door Material Hollow Metal Door, minimum 12 Gauge galvanneal steel Core Ribbed and Insulated (mineral core for fire rating is acceptable/preferred) Fire Rating Rating must be compatible with the wall's fire resistance rating, typically 75% of the wall's rating. See required fire rating for correctional facilities on Table 2 Handing 4 Left Hand Outswing, 5 Right Hand Outswing. Frame Material Minimum 12 Gauge galvanneal steel, fire-rated and labeled Frame Type Knock-down (KD) for drywall/unit masonry or welded for masonry. Frames are to be prepared for 80 series lock, keyed 2 sides strike, surface pull on both sides and prepped for PA closer. Finish Factory primed for field painting TABLE 2: FIRE RATING: The complete door assembly (door, frame, and all hardware) shall be 90 minutes fire rated. This rating must be compatible with the fire-resistance rating of the specific wall assembly in which the door will be installed, as dictated by the building's fire safety plan and local code requirements. Category Requirement Description Applicable Standards & Agencies Listing & Labeling All components must be listed and labeled by a recognized third-party testing agency acceptable to the Authority Having Jurisdiction (AHJ). Underwriters Laboratories (UL), Intertek (WH), Factory Mutual (FM) Testing Standard Assemblies shall be tested under positive pressure conditions. NFPA 252, ANSI/UL 10C Labeling Visibility A permanent, legible fire rating label must be affixed to both the door and the frame and remain visible after installation for inspection purposes. N/A Code Compliance Vendor must confirm that all components, when installed as an assembly, comply with relevant building and safety codes for correctional facilities (Group I-3 Occupancies, IBC). NFPA 80 (Standard for Fire Doors and Other Opening Protectives) International Building Code (IBC) TABLE 3: HARDWARE SPECIFICATIONS: All hardware must be "listed" or "labeled" for use on a fire-rated assembly, compatible with the specified fire rating, and factory-prepped for ANSI/BHMA Grade 1 standards. Item Requirement Quantity per Door Notes Hinges Heavy-duty steel ball bearing hinges, UL Listed 3 Exit Device Panic Hardware/Fire Exit Hardware (rim or mortise type) self-latching 1 set Must be a crossbar or touch bar device, operable with an applied force of 15 lbs or less. Locking Must be openable from the egress side at all times without special knowledge or tools. Keyed access from the exterior is permitted. 1 set 80 series lock, keyed 2 sides strike, surface pull on both sides and prepped for PA closer. Door Closer Heavy-duty, adjustable, surface-mounted, UL Listed 1 unit Must be self-closing and ensure positive latching. Seals Smoke and draft control gasketing/seals 1 set Required for a complete smoke-rated assembly. Threshold [Specify if required, e.g., 1/2" beveled aluminum, non-combustible] 1 unit (if required) D. CODE AND STANDARD REQUIREMENTS: 1. All supplied materials and the complete assembly must comply with the latest editions of the following codes and standards (or local equivalents as adopted by the AHJ): NFPA 80: Standard for Fire Doors and Other Opening Protectives NFPA 101: Life Safety Code International Building Code (IBC) International Fire Code (IFC) OSHA requirements for exit routes UL 10C or NFPA 252: Standard for positive pressure fire testing of door assemblies UL 1784: Standard for Air Leakage Tests of Door Assemblies (if smoke rating is required) 2. Vendors must confirm that all components, when installed as an assembly, will bear a permanent, legible label from a recognized third-party testing agency (e.g., UL, Intertek/WH, FM). E. SUBMISSION REQUIREMENTS: 1. Itemized pricing for doors, frames, hardware, and any included accessories. 2. Proposed lead time for manufacturing and delivery to FCC Lompoc 3. Confirmation of compliance with all referenced codes and standards. 4. Cut sheets/product data for all proposed items. F. DELIVERY OF MATERIALS: 1. Deliveries shipped directly to FCC LOMPOC can only be received between 7:30 a.m. and 2:00 p.m., Monday through Friday, excluding Federal Holidays. 2. POC: Mr. Fernando Pena, BOP Engineering Technician, FXPena@bop.gov, or 805-735-2771 3. FBOP will be responsible for receiving or signing deliveries. 4. FCC LOMPOC will provide resources for loading and unloading materials or equipment upon arrival. | - | Combined Synopsis | 11/16/2026 |
Proposed procurement for NSN 5340014107057 CLEVIS,ROD END: Line 0001 Qty 38 UI EA Deliver To: By: 0113 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 1. The Guaranteed Minimum quantity will be 5. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically. | - | Combined Synopsis | 11/23/2026 |
THIS SOLICITATION AND ANY SUBSEQUENT AMENDMENTS WILL BE POSTED TO THE SAM WEBSITE: SAM.GOV ELECTRONIC SUBMISSION OF QUOTES IS AVAILABLE THROUGH THE SAM WEBSITE. To be considered for award, if the contractor (awardee) is required to implement NIST SP 800-171, the contractor (awardee) shall have a current assessment as detailed in DFARS 252.204-7019 (I.E., not more than 3 years old unless a lesser time is specified in the solicitation) **Items deemed to be Commercial Off The Shelf (COTS) are exempt from NIST SP 800-171 requirement. Must identify and provide information to contracting officer on bid during solicitation period** Please read the contract in its entirety. If you are able to provide a quote be sure to provide the following information in the sections provided below: Page 1 BLK 17a. Provide Contractor's info and cage code. Section A. A1 – 1. Enter The Contractor's POC Section B. – Enter your Quote and any other info we should know. Please quote FOB Destination BREMERTON, WA. Section B. K21 – Check the appropriate box and provide the Manufacturer’s Name, Address and the Country of Manufacturing Section F. – Provide the Lead Time and/or Delivery Date. Section K. - 52.204-24 (d)(1) and (2) Check the applicable boxes Section K. - 52.209-11 (b)(1) and (2) Check the applicable boxes Page 1 - Read box 28 and sign boxes 30 a, b, and c. Return the signed and filled out solicitation with your quote by SUNDAY, 28 SEPTEMBER 2025 7AM FOR YOUR BID TO BE DEEMED RESPONSIVE A SIGNED AND COMPLETED SOLICITATION MUST BE SUBMITTED VIA EMAIL. EMAIL: karl.lindley@dla.mil Please be advised that all communications regarding this requirement are governed by the Procurement Integrity Act. In accordance with FAR 3.104, no proprietary bid information, pricing data, or source selection-sensitive metrics may be exchanged or solicited outside of authorized contracting channels. Thank you for your cooperation in maintaining a fair and ethical procurement process." | - | Solicitation | 11/09/2026 |
Proposed procurement for NSN 5999014355968 CONTACT ASSEMBLY,ELECT: Line 0001 Qty 652 UI EA Deliver To: DLA DISTRIBUTION WARNER ROBINS By: 0408 DAYS ADO Line 0002 Qty 1 UI EA Deliver To: DLA DISTRIBUTION WARNER ROBINS By: 0210 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically. | - | Combined Synopsis | 11/16/2026 |
Additional Details
Solicitation Number
12805B21Q0457
Archive Date
Sep 17, 2021
Office Address
FORT COLLINS, CO, 80526