GovChime
Notice ID: 4929d83ed76d4183a848ab716daa72b4Award NoticeAwarded

MG1010 Lab Size 10 Saw MicroGin Lab Gin (Brand Name or Equal)

Awarded on August 9, 2024. Full description on SAM.gov.

Awarded tounder 12805B24P0223 (source: SAM.gov award notice)• $79.8K

Overview

Posted
August 9, 2024
Notice type
Award Notice
Set-aside
Total Small Business Set-Aside (FAR 19.5)

Notice details

Place of performance
College Station, TX, 77845
Last updated
Dec 4, 2025
Award date
Aug 9, 2024
Award amount (SAM.gov award notice)
$79.8K

Identifiers

Solicitation number
12805B24Q0495
Notice ID
4929d83ed76d4183a848ab716daa72b4
Award number (PIID)
12805B24P0223

Description

Solicitation Number 12805B24Q0495 Compass MG1010 Lab Size 10 Saw MicroGin Lab Gin College Station, TX The Agricultural Research Service, Plains Area Administrative office, Acquisition and Personal Property office intends to solicit and award a single firm-fixed-price contract for the purchase, installation, and training on a new cotton gin. This is a combined synopsis/solicitation for commercial items prepared under Federal Acquisition Regulation (FAR) Subpart 12.6 – Streamlined Procedures for Evaluation and Solicitation for Commercial Items and supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. This combined synopsis/solicitation is issued under Request for Quotation (RFQ) number 12805B24Q0495. This requirement is being solicited under NAICS code 333111, Farm Machinery and Equipment Manufacturing and is set-aside for 100% Total Small Business. The size standard is 1250 Employees. All FAR references are based off FAC 2024-05, Effective 22 May 2024. This firm-fixed-priced award will be awarded as firm-fixed price contract. FAR 52.212-1, Instructions to Offerors-Commercial, is applicable to this acquisition. An addendum will be added on page 14. FAR 52.212-2, Evaluation of Offerors, is applicable to this acquisition. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. FAR Part 13 Simplified Acquisition Procedures utilizing Lowest Priced Technically Acceptable (LPTA) factors will be used for the evaluation process. The following factors shall be used to evaluate offers: Technical Factor #1. Documentation provided for the cotton gin to be provided meets or exceeds all the salient characteristics and specifications listed in Attachment 1. If submitting an ‘equal’ product, failure to not address the documentation required in AGAR 452.204-70 and 452.204-71 shall cause the vendor to be rated unacceptable. Technical Factor #2. Vendor submitted a filled out FAR Provision 52.225-2. Failure to submit this shall cause the vendor to rated unacceptable. If an offeror receives an adjectival rating of “unacceptable” in any factor they may not be eligible for contract award. Offeror must sign and date the 52.212-1 Addendum found of page 14, along with all amendments posted to sam.gov for 12805B24Q0495. FAR Clause 52.212-4, Contract Terms and Conditions-Commercial Items, applies to this acquisition and no addendum has been added. FAR Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, applies to this acquisition and applicable clauses within 52.212-5 to this acquisition have been marked with three X’s. Other additional FAR Clauses have been added to this synopsis/solicitation. If they are incorporated by reference in this synopsis/solicitation, use acquisition.gov to read them in their entirety. Submittals Formats: Only Electronic submissions via email will be accepted due to Contract Specialist working remotely. Quotes are due to the Contract Specialist, Mr. David Hildebrand, at david.hildebrand@usda.gov by 12:00 PM (CST) 2 August 2024. For information regarding this synopsis/solicitation, please contact Mr. David Hildebrand at david.hildebrand@usda.gov. Only written submitted questions will be given a response. They will be answered via a Questions from Industry posting to sam.gov. Due to USDA-ARS operating remotely, Mr. Hildebrand is only available via email. Notice to Offeror(s): The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs incurred. Site Visit: None offered. Questions must be submitted in writing via email to david.hildebrand@usda.gov. Questions received after July 31, 2024 may not receive a response. Responses will be posted to sam.gov in a document titled Questions from Industry. You will not receive a direct response.

Full description on SAM.gov

Award Overview

Award Number

12805B24P0223

Award Amount (SAM.gov award notice)

$79.8K

Award Date

Aug 9, 2024

Awardee

Awardee UEI

NV2UUCLKXBC8

Original Solicitation

Notice ID: 4929d83ed76d4183a848ab716daa72b4

Posted Date: Aug 9, 2024

Original Response Deadline: Not specified

Contacts

Documents

No documents available.

Lifecycle

Solicitation:12805B24Q0495
  1. Combined Synopsis
  2. Awarded

This opportunity has been awarded.

  1. Combined SynopsisJul 24, 2024

    MG1010 Lab Size 10 Saw MicroGin Lab Gin (Brand Name or Equal)

    Notice 3bee249d531f4d4f9b44becd907c2104 on SAM.gov

  2. AwardedCurrentAug 9, 2024

    MG1010 Lab Size 10 Saw MicroGin Lab Gin (Brand Name or Equal)

    Notice 4929d83ed76d4183a848ab716daa72b4 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Amendment 0002: Extend quotation due date. Amendment 0001: Amend model number to match revised Salient Characteristics and new due date. Notice to Offerors: Funding is not currently available for this requirement. The Government anticipates awarding the contract no later than 1 October 2026; however, award may occur earlier if funding becomes available. This combined synopsis and solicitation is prepared in accordance with Revolutionary FAR Overhaul (RFO) Part 12, Commercial Products and Commercial Services. This announcement constitutes the only solicitation; quotations are being requested, and a separate written solicitation will not be issued. The Air Force Test Center (AFTC), Operational Contracting Division, Eglin Air Force Base, Florida, is issuing Request for Quotations (RFQ) FA282326Q0066 to establish a contract for John Deere 5075E Cab Tractor with Rhino AG 4155 Attachment Brand Name or Equal. All work shall be performed in accordance with (IAW) Salient Characteristics, dated 13 August 2026, and will be executed as Firm-Fixed-Price contract. This acquisition is a 100 percent Small Business set-aside under NAICS code 333111 (Farm Machinery and Equipment Manufacturing), which carries a size standard of 1,250 Employees. The applicable Product Service Code (PSC) is 2420. Offerors must clearly identify their business size status within their quotations to be considered eligible for award.
49%
Combined Synopsis09/10/2026
15ft - Mowing Attachment Lower Deck Thickness -0.17 in. Side Skirt Thickness - 3.0 gauge Lower Deck Thickness - 7.0 gauge Upper Deck Thickness - 11.0 gauge Transport Width (At Wing Wheels) - 8.0 ft Side Skirt Thickness -0.24 in. Upper Deck Thickness - 0.12 in. Blade Tip Speed - 540 RPM - 264.435704 fusillade Tip Speed - 1000 RPM - 268.700796 fps Main Driveline Size - CV ASAE Category6, splined telescoping profiles Tractor PTO HP Range - 55.0 hp Gearbox Warranty - 5 years Cutting Width - 15.0 ft Cutting Capacity (Diameter) - 4.0 in. Dimensions Approximate Weight - 7616.0 lb. Lower Deck Thickness - 0.17 in. Side Skirt Thickness - 3.0 gauge Lower Deck Thickness - 7.0 gauge Overall Length - 17.3 ft Overall Width - 5.7 ft Dimensions: Upper Deck Thickness - 11.0 gauge Hinges - Intermittent cast segments with segmented 3.1-cm (1.25-in.) diameter hinge pins Transport Width (At Wing Wheels) - 8.0ft Side Skirt Thickness - 0.24 in. Deck Type - Full double deck Upper Deck Thickness -0.12 in. Deck Shape - Smooth top deck Gearcases: Outer Horsepower Rating - Continuous- 250.0 hp Transfer Horsepower Rating - Peak - 300.0 hp Center Horsepower Rating -Continuous - 250.0 hp Number - 4 Transfer Horsepower Rating - Continuous - 250.0 hypocenter Horsepower Rating - Peak - 275.0 hp Outer Horsepower Rating - Peak - 275.0 hydraulics: Wing Flex - For transport: upward 90 degree (angle) Upward working angle:45 degree (angle) Downward working angle: 22 degree (angle) Wing Lift - Three SC connected to the tractor (machine height and wing lift) Independent wing operation Blades: Blade Tip Speed - 540 RPM - 264.435704 fps Blade Tip Speed - 1000 RPM - 268.7007961eachfps Blade Holder Type - Round pan stump jumper for blade carrier protection against obstruction damage: 7 gauge 4.55 mm 0.18 in. Blade bar: 2.5 x 12 cm 1 x 4.7 in. Overlap -6.0 in. Type - Suction Thickness - 0.5 in. Width - 4.0 in. Wheels: Type - Option 1 - 5-bolt,16 PR Heavy-Duty Forklift Tires 736 x 282 x 381 mm (29 x 11 x 15 in) Suspension - Poly spring suspension Wheels: Row Width Adjustment - No Wing-Leveling Adjustment -Adjustable threaded clevis on wing lift cylinders Drivelines: Connecting Driveline Protection - No-seize, slip-clutch driveline Main Driveline Size - CV ASAE Category 6,splined telescoping profiles Connecting Driveline Size - ASAE Category 5, splined telescoping profiles Hitch: Jack Stand - Mechanical jack stand in base for all machines with hydraulically operated height, stays vertical while raising/lowering Type - Standard narrow A-frame tongue with Swivel hitch Tractor Compatibility: Tractor PTO HP Range - 55.0 hp Tractor PTO - 540, 1000 rpm Warranty: Gearbox Warranty - 5 years Capacity: Cutting Chamber Depth - 10.0 in. Cutting Width - 15.0 ft Cutting Height - 1-18 in. Cutting Capacity (Diameter) - 4.0 in. Shielding: Rear - Double-row chain guard Front - Double-row chain guard Must be able to be serviced by the manufacturer within 50 miles of Fort Bragg
46%
Combined Synopsis08/26/2026
Competitive quotes are being requested under Request for Quote (RFQ) Number N66001-26-Q-6241. The North American Industry Classification System (NAICS) code applicable to this acquisition is 333248, All Other Industrial Machinery Manufacturing and the small business size standard is 750 employees. This procurement is a Total Small Business Set-Aside. Only quotes submitted by Small Business Concerns will be accepted by the Government. Any quote that is submitted by a non-Small Business Concern will not be considered for award. The Government is seeking to acquire 22 IDEX 3D printers and associated accessories. To be considered acceptable and eligible for award, quotes must provide all of the items and quantities listed in the DESCRIPTION OF REQUIREMENTS section of the attached N66001-26-Q-6241 CSS document. The Government will not consider quotes or offers for partial items or quantities. Please see all attachments for further descriptions, details, and instructions. Questions Due Date and Submission Requirements: All questions must be received before 23 July 2026 at 12:00PM, Pacific Time. Questions must be submitted via email to the Government RFQ Point of Contact listed below. Include RFQ# N66001-26-Q-6241 on all inquiries. Questions may be addressed at the discretion of the Government. RFQ Due Date and Submission Requirements: This RFQ closes on 27 July 2026 at 2:00PM, Pacific Time. Quotes must be submitted via the Solicitation Module within the Procurement Integrated Enterprise Environment (PIEE) website at https://piee.eb.mil, under Notice ID N66001-26-Q-6241. E-mail quotes or offers will not be accepted and late quotes will not be accepted. PIEE Assistance: For PIEE technical issues, see the Vendor Customer Support resources at https://cac.piee.eb.mil/xhtml/auth/web/homepage/vendorCustomerSupport.xhtml. Government RFQ Point of Contact: The point of contact for this solicitation is Trinity Anglo at trinity.l.anglo.civ@us.navy.mil. Reference RFQ# N66001-26-Q-6241 on all email exchanges regarding this acquisition.
45%
Combined Synopsis07/27/2026
This combined synopsis and solicitation is prepared in accordance with Revolutionary FAR Overhaul (RFO) Part 12, Commercial Products and Commercial Services. This announcement constitutes the only solicitation; quotations are being requested, and a separate written solicitation will not be issued. The Air Force Test Center (AFTC), Operational Contracting Division, Eglin Air Force Base, Florida, is issuing Request for Quotations (RFQ) FA282326Q0076 to establish a contract for Rhino RF420 flex-wing rotary mower deck, Brand Name or Equal. All work shall be performed in accordance with (IAW) Salient Characteristics, dated 12 August 2026, and will be executed as Firm-Fixed-Price contract. This acquisition is a 100 percent Small Business set-aside under NAICS code 333111 (Farm Machinery and Equipment Manufacturing), which carries a size standard of 1,250 Employees. The applicable Product Service Code (PSC) is 3720. Offerors must clearly identify their business size status within their quotations to be considered eligible for award. NOTICE TO OFFERORS The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs. This solicitation incorporates one or more clauses and/or provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): https://www.acquisition.gov/AVAILABILITY OF FUNDS Funding is not currently available for this requirement. The Government anticipates awarding the contract no later than 1 October 2026; however, award may occur earlier if funding becomes available.
40%
Combined Synopsis08/28/2026
Zero Turn Mowers
40%
Combined Synopsis07/14/2026

Additional Details

Solicitation Number

12805B24Q0495

Archive Date

Aug 24, 2024

Office Address

FORT COLLINS, CO, 80526