GovChime
Notice ID: 1e16a9c145e74747a8474efef8ae53d6Combined Synopsis/Solicitation

Cast + Blown Film Line with Options, Installation, and Training - Brand Name or Equal Product. Albany, CA

Archived on September 9, 2023. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
1:00 PM UTC−07:00
Posted
August 21, 2023
Notice type
Combined Synopsis/Solicitation
NAICS
333241: Food Product Machinery Manufacturing
Agency
Department of AgricultureAGRICULTURAL RESEARCH SERVICE

Notice details

Office
USDA ARS PWA AAO ACQ/PER PROP
Place of performance
Albany, CA, 94710
Last updated
Dec 4, 2025

Identifiers

Solicitation number
12905B23Q0215
Notice ID
1e16a9c145e74747a8474efef8ae53d6

Description

COMBINED SYNOPSIS/SOLICITATION This is a combined synopsis/solicitation for commercial items prepared in accordance with the procedures contained in FAR Part 12.6, Acquisition of Commercial Items, and FAR Part 13, Simplified Acquisition Procedures, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation number is 12905B23Q0215 and is issued as a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) Number 2023-4 This solicitation is issued as UNRESTRICTED. The associated NAICS code is 333241 the small business size standard is 500. List CLINS, item descriptions, quantities, and units of measure: 0001 - Cast + Blown Film Line with Options, Installation, and Training 1 - EA Description/Statement of Work/Specification: Please See Attachment 1 - Specifications Date(s) and place(s) of delivery and acceptance: 9 months after award USDA-ARS-PWA-WRRC 800 Buchan Street Albany, CA 94710 This requirement shall be FOB Destination. FAR Provision 52.212-1, Instructions to Offerors-Commercial, is incorporated by reference and applies to this acquisition. Please see the attached RFQ terms and conditions for the submission requirements and its addendum. Evaluation: For the evaluation criteria, please see the attached RFQ terms and conditions. Offerors are required to complete in full FAR Provision 52.212-3, Offeror Representations and Certifications-Commercial Items, with their offer online at SAM: www.sam.gov. An offeror must state in their offer if they completed FAR 52.212-3 online and that is it up-to-date and valid. See the attached RFQ terms and conditions for more requirements. FAR Clause 52.212-4, Contract Terms and Conditions-Commercial Items, applies to this acquisition. Please see the attached RFQ terms and conditions for its Addendum. FAR Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, is incorporated and applies to this acquisition. Please see the attached RFQ terms and conditions that are applicable to the acquisition. There are no additional contract requirement(s) or terms and conditions (such as contract financing arrangements or warranty requirements) determined by the contracting officer to be necessary for this acquisition and consistent with customary commercial practices. The Defense Priorities and Allocations System (DPAS) and assigned ratings are not applicable to this solicitation. Date, time, and place offers are due. Offers are due by 08/25/2023. Submit offers to the following e-mail address(es), by the offer due date and time: lam.pham@usda.gov Late quotes after the established deadline may be considered only if it is in the governments best interest and if it will not unduly delay award. Any and all questions regarding this solicitation shall be submitted in writing to lam.pham@usda.gov no later than Friday 08/23/2023 at 11:00 am Pacific Time.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:12905B23Q0215
  1. Combined Synopsis
  1. Combined SynopsisCurrentAug 21, 2023

    Cast + Blown Film Line with Options, Installation, and Training - Brand Name or Equal Product. Albany, CA

    Notice 1e16a9c145e74747a8474efef8ae53d6 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
THIS IS A NOTICE OF INTENT TO SOLE SOURCE, NOT A REQUEST FOR A QUOTE (RFQ). A RFQ WILL NOT BE ISSUED AND QUOTES WILL NOT BE REQUESTED. In accordance with FAR 6.103.1, the Naval Air Warfare Center, Weapons Division, China Lake, intends to award a firm fixed price contract on a sole source basis for: To: Forge Nano Inc. at 12300 Grant st. #110 Thornton, Colorado as the only manufacturer of fluidization ALD systems, which rely on their exclusive, proprietary software. Because the technology and software licenses are strictly proprietary, no other vendor can provide or support this equipment. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE QUOTES; no solicitation or RFQ will be forthcoming. However, interested parties may identify their interest and capability to respond to this requirement no later than 4:00pm PST 11/2/26. The written response shall reference solicitation number N6893626SIMACQD550000E5500000441 and must provide a clear and concise capability statement to show the ability to perform the required work without compromising the quality, accuracy, reliability and schedule. Written responses to this notice shall be submitted to email: Amy Lamberth amy.s.lamberth.civ@us.navy.mil All vendors must be registered at https://sam.gov/ prior to submitting quotes. It is recommended that all interested parties be aware that processing this additional information may take at least 10-15 days and are proactive in maintaining the SAM registrations in an 'Active' status as the government cannot award an entity without an 'Active' SAM registration. Contractors must be certified through Defense Logistics Information Services (DLIS) in order to access Controlled Unclassified Information (CUI) or Export Controlled Information. Access to CUI is limited, to a single point of contact (POC) per CAGE code, who is listed as the Data Custodian on the DD 2345 and approved by Defense Logistics Agency (DLA). The DD 2345 must be approved prior to requesting access to CUI in SAM.gov. Contractors are responsible for coordinating with their CAGE code’s Data Custodian POC to request access to CUI. For additional information, visit the DLA website for the Joint Certification Program: https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/.
54%
Pre-Solicitation11/02/2026
51%
AwardedOpen
Brookhaven Science Associates, LLC (herein known as “BSA”), operator of Brookhaven National Laboratory (BNL) under a Prime Contract (DE-SC0012704) with the U.S. Department of Energy (DOE), herewith solicits your quote for an Ultra-High Vacuum Suitcase. Please see attached Combined Synopsis/Solicitation 485362 and its enclosures for details.
51%
Combined Synopsis11/20/2026
This flash sinter-forging technology from Los Alamos National Laboratory enables manufacturers to produce dense, net- or near-net-shape ceramic components in minutes rather than hours or days, while cutting energy consumption by up to 90% and significantly reducing production costs. By simultaneously applying electric current, heat, and mechanical pressure, the process consolidates shaping, densification, and finishing into a single, compact operation, eliminating much of the costly machining typically required for hard, brittle ceramics. The result is faster throughput, lower capital and operating expenses, smaller equipment footprints, and improved sustainability—while also enabling superior microstructural control and access to advanced or difficult-to-sinter materials. How it Works: The technology works by placing ceramic powder into a specially designed die and then applying three inputs at once: an electric field and current, moderate external heating, and mechanical pressure. As electricity passes directly through the ceramic, it rapidly heats the material from the inside, dramatically accelerating the bonding of particles while keeping overall furnace temperatures lower than conventional methods. At the same time, controlled pressure compresses and shapes the material as it densifies, allowing the part to reach high density while already close to its final geometry. Sensors and software coordinate the electrical, thermal, and mechanical conditions in real time, enabling precise control of the process and material behavior. By integrating electrical activation and forging into a single, tightly controlled step, the system achieves fast densification and shaping that would otherwise require multiple, time-intensive processing stages. Key Advantages: Minutes-long processing: Produces dense ceramic parts far faster than conventional sintering methods. Up to ~90% energy reduction: Direct electrical heating dramatically lowers energy use and operating costs. Near-net shaping: Forms parts during densification, greatly reducing or eliminating costly post-machining. Lower total manufacturing cost: Combines forming, sintering, and finishing into a single streamlined step. Advanced material capability: Enables difficult-to-sinter and next-generation ceramics with controlled microstructures. Compact and scalable: Smaller footprint and lower power requirements support deployment from R&D to industrial production. Market Applications: Semiconductor manufacturing (high-purity ceramic components, fixtures, insulators, wear parts) Aerospace and defense (high-temperature components, protective structures, lightweight ceramic parts) Energy and nuclear (fuel cells, solid-state batteries, nuclear and high-temperature energy ceramics) Medical and dental (implants, prosthetics, precision ceramic components) Industrial and manufacturing (wear-resistant parts, tooling components, structural ceramics) Additive and advanced manufacturing (post-processing of 3D-printed ceramic parts, rapid densification of complex shapes) Development Status: TRL 3 US Patent No. 12,465,971 LA-UR-26-23345 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
51%
Special Notice05/11/2026
Indefinite Delivery Contract: Estimated quantity 101.000 ; Not to Exceed 350,000.00
44%
AwardedOpen

Additional Details

Solicitation Number

12905B23Q0215

Archive Date

Sep 9, 2023

Office Address

ALBANY, CA, 94710