Notice ID: 06ff10e6954844bf9512d7dd42358d93Combined Synopsis/Solicitation
Remove/Replace Brand Name Heliax Transmission Line
Archived on April 9, 2024. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 PM UTC−06:00
- Posted
- March 15, 2024
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 517810: All Other Telecommunications
- Agency
- Department of CommerceNATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION
Notice details
- Office
- DEPT OF COMMERCE NOAA
- Last updated
- Sep 9, 2025
Identifiers
- Solicitation number
- 1305M324Q0134
- Notice ID
- 06ff10e6954844bf9512d7dd42358d93
Description
COMBINED SYNOPSIS/SOLICITATION Non-Personal Services To Remove And Dispose of the Current Brand Name Heliax Transmission Line Affixed to the Calibration Tower And To Procure And Install Four Independent Runs of Heliax Transmission Lines Near The Base of the Calibration Tower Located At the National Weather Radar Testbed (NWRT) Facility INCUMBENT There is no incumbent (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice and in accordance with the simplified acquisition procedures authorized in FAR Part 13. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. (ii) This solicitation is issued as a request for quotation (RFQ). Submit written quotes on RFQ Number 1305M324Q0134. (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2024-03 (Feb 2024). (iv) This solicitation is being issued as a Total Small Business Set-Aside. The associated NAICS code is 517810. The small business size standard is $40.0M. (v) This combined solicitation/synopsis is for purchase of the following commercial services: CLIN 0001 Quantity of Four of 150 ft of LDF5-50A, Heliax Low Density Foam Coaxial Cable, corrugated copper, 7/8 in, black PE jacket in accordance and incorporated in the Statement of Work. Delivery needed to accommodate the installation within 30 days from date of award. 4 EA Unit Cost $___________ Extended Amount $___________ CLIN 0002 Services, non-personal, to provide all labor, equipment and materials (unless otherwise provided herein) necessary to remove and dispose of the current Brand Name Heliax transmission line affixed to the calibration tower and to procure and install four independent runs of Brand Name Heliax transmission lines near the base of the National Weather Radar Testbed (NWRT) facility, in accordance and incorporated in the Statement of Work. Period of Performance is 30 days from date of award. 1 JB Unit Cost $___________ Extended Amount $___________ CLIN 0003 Shipping and delivery costs. Delivery needed to accommodate the installation within 30 days from date of award. 1 EA Unit Cost $___________ Extended Amount $___________ (vi) Description of requirements is as follows: See attached, incorporated Statement of Work which applies to CLIN 0002, and Department of Labor Wage Rates: WD 2015-5315, Revision No. 22, dated 12/26/2023, which can be found on: https://sam.gov/content/wage-determinations (vii) Date(s) and place(s) of delivery and acceptance: Period of performance shall be: 30 days from date of award Place of Performance is: The Calibration Tower does not have a precise location. The office building that pertains to the Calibration Tower is at the address below. Address: 1426 Halley Cir. Norman, OK. 73069 (viii) FAR provision 52.212-1, Instructions to Offerors-Commercial Products and Commercial Services (Sept 2023), applies to this acquisition and can be found on the Request for Quote form SF18 attachment. (ix) FAR provision 52.212-2, Evaluation-Commercial Products and Commercial Services (Nov 2021), applies to this acquisition and can be found on the Request for Quote form SF18 attachment. (x) FAR provision 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services (Feb 2024), applies to this acquisition and can be found on the Request for Quote form SF18 attachment. Offerors are advised to include a completed copy of the provision with its offer. (xi) FAR clause at 52.212-4, Contract Terms and Conditions-Commercial Products and Commercial Services (Nov 2023), applies to this acquisition and can be found on the Request for Quote form SF18 attachment. (xii) FAR clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services (Feb 2024), applies to this acquisition apply can be found in full text on the Request for Quote form SF18 attachment. (xiii) Any additional contract requirement(s) or terms and conditions that apply can be found on the Request for Quote form SF18 attachment. (xiv) Defense Priorities and Allocations System (DPAS) and assigned rating does not apply. (xv) Quotes are required to be received in the contracting office no later than 12:00 PM MST/MDT on 03/25/2024. All quotes must be submitted electronically via email to Marilyn.Herrera@noaa.gov. (xvi) Any questions regarding this solicitation should be submitted electronically via email to Marilyn.Herrera@noaa.gov. UTILIZATION OF FEDCONNECT FOR CONTRACT ADMINISTRATION The Department of Commerce will utilize the FedConnect web portal in administering this award. The contractor must be registered in FedConnect and have access to the FedConnect website located at https://www.fedconnect.net/Fedconnect/. For assistance in registering or for other FedConnect questions please call the FedConnect Help Desk at (800) 899-6665 or email at support@fedconnect.net. There is no charge for registration in or use of FedConnect . (End) 1352.215-72 Inquiries (Apr 2010) OFFERORS MUST SUBMIT ALL QUESTIONS CONCERNING THIS SOLICITATION IN WRITING VIA EMAIL TO MARILYN.HERRERA@NOAA.GOV. QUESTIONS SHOULD BE RECEIVED NO LATER THAN 12:00 PM MST/MDT on 03/22/2024. Any responses to questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the question responses included in the amendment to the solicitation will govern performance of the contract. (End of clause) 52.237-1 Site Visit (Apr 1984) Offerors or quoters are urged and expected to inspect the site where services are to be performed and to satisfy themselves regarding all general and local conditions that may affect the cost of contract performance, to the extent that the information is reasonably obtainable. In no event shall failure to inspect the site constitute grounds for a claim after contract award. (End of provision) A site visit is highly recommended but not required. Offerors are urged and expected to inspect the site where services are to be performed and to satisfy themselves regarding all general and local conditions that may affect the cost of contract performance, to the extent that the information is reasonably obtainable. In no event shall failure to inspect the site constitute grounds for a claim after contract award. Please contact MARILYN.HERRERA@NOAA.GOV to coordinate with the site. All questions during the site visit should be submitted electronically to MARILYN.HERRERA@NOAA.GOV. FAR 52.212-1 Instructions to Offerors-Commercial Products and Commercial Services (Sep 2023) NOTICE TO OFFERORS: Instructions for submitting quotations under this request for quote must be followed. Failure to provide all information to aid in the evaluation may be considered non-responsive. Offers that are non-responsive may be excluded from further evaluation and rejected without further notification to the offeror. 1. Submit PDF or Microsoft Word format quotations to the office specified in this solicitation at or before the time specified in the solicitation. Email quotes are required and can be sent to MARILYN.HERRERA@NOAA.GOV. 2. Offeror shall have an active registration in the System for Award Management (SAM found at https://sam.gov/content/home) in order to provide a quote and be eligible for award. Must provide their UEID/CAGE CODE with their quote. 3. Offerors shall assume that the Government has no prior knowledge of them or their capability. 4. Offerors must provide all evaluation criteria in accordance with FAR 52.212-2. Offerors who do not provide all evaluation criteria will not be accepted. Offers will be evaluated based on price and the factors set forth in paragraph (a). The evaluation will consider the Non-Price Technical Solution (Technical Approach and Past Performance) to be significantly more important than price. However, as quotes are determined to be more equal in the non-price evaluation factor, price becomes more important and may become the determining factor for award. If, at any stage of the evaluation, all vendors are determined to have submitted equal, or virtually equal, Non-Price Technical Solutions, price could become the factor in determining which vendor will receive the award. The Government intends to evaluate the quotes and award a purchase order based on the Offerors initial quote; therefore, the Offerors initial quote should contain the Offerors best terms from a Non-Price Technical Solution and price standpoint. The Government reserves the right not to award a purchase order depending on the quality of the quote(s) submitted and the availability of funds. Furthermore, the Government may waive informalities and minor irregularities or omissions in quotes received. The Government may make award to other than the lowest-priced Offeror or the Offeror with the highest technical rating if the Contracting Officer determines that to do so would result in the best value to the Government. The Government will not make an award at a significantly higher overall price to achieve only slightly superior performance capability. (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. Paragraph (a) is hereby completed as follows: Evaluation will be based on the following: 1. Technical Approach and Capability. The Offerors overall technical approach will be evaluated to assess the Government's level of confidence in the Offerors understanding of, approach to, and ability to successfully perform the requirements as described in the Statement of Work. Provide a detailed description of the companys experience performing similar services. A detailed technical approach write-up describing how the Offeror will perform this service is required to be submitted with the quote regardless of whether a site visit was made or not. The technical approach write-up must not be a reiteration of the Statement of Work, but how your company plans on performing the tasks listed in the attached Statement of Work. (i.e. performance checklists, anticipated number of employees, anticipated hours at the facility and/or confirmation of supplies being provided, etc.) 2. Past Performance. The Offeror's past performance on related contracts will be evaluated to determine, as appropriate, successful performance of contract requirements, quality and timeliness of delivery of goods and services, cost management, communications between contracting parties, proactive management and customer satisfaction. The Government will use its discretion to determine the sources of past performance information used in the evaluation, and the information may be obtained from references provided by the Offeror, the agencys knowledge of Offeror performance, other government agencies or commercial entities, or past performance databases, and will be based on responsiveness, quality, and customer services. Quote shall include at least two references from at least two separate contracts for similar and relevant services including the phone number, full address, and e-mail address. Offerors lacking relevant past performance history, or for whom past performance information is either not available or has not been submitted to the Government, will receive a neutral rating for past performance. 3. Price. The Government will evaluate the price quote for completeness and reasonableness in relation to the RFQ requirements. Quoted prices must be entirely compatible with the Non-Price Technical Solution. 4. Transmission line must be Heliax brand name The Government intends to award a trade-off, single firm fixed-price purchase order on an all or none basis with payment terms of Net 30. (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offers specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of provision) THE GOVERNMENT DOES NOT ACCEPT RESPONSIBILITY FOR NON-RECEIPT OF QUOTES. IT IS THE CONTRACTORS RESPONSIBILITY TO REQUEST AND RECEIVE A CONFIRMATION OF THE QUOTE RECEIPT . 1. FAR 52.212-2 Evaluation- Commercial Products and Commercial Services (Nov 2021) Offers will be evaluated based on price and the factors set forth in paragraph (a). The evaluation will consider the Non-Price Technical Solution (Technical Approach and Past Performance) to be significantly more important than price. However, as quotes are determined to be more equal in the non-price evaluation factor, price becomes more important and may become the determining factor for award. If, at any stage of the evaluation, all vendors are determined to have submitted equal, or virtually equal, Non-Price Technical Solutions, price could become the factor in determining which vendor will receive the award. The Government intends to evaluate the quotes and award a purchase order based on the Offerors initial quote; therefore, the Offerors initial quote should contain the Offerors best terms from a Non-Price Technical Solution and price standpoint. The Government reserves the right not to award a purchase order depending on the quality of the quote(s) submitted and the availability of funds. Furthermore, the Government may waive informalities and minor irregularities or omissions in quotes received. The Government may make award to other than the lowest-priced Offeror or the Offeror with the highest technical rating if the Contracting Officer determines that to do so would result in the best value to the Government. The Government will not make an award at a significantly higher overall price to achieve only slightly superior performance capability. (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. Paragraph (a) is hereby completed as follows: Evaluation will be based on the following: 1. Technical Approach and Capability. The Offerors overall technical approach will be evaluated to assess the Government's level of confidence in the Offerors understanding of, approach to, and ability to successfully perform the requirements as described in the Statement of Work. Provide a detailed description of the companys experience performing similar services. A detailed technical approach write-up describing how the Offeror will perform this service is required to be submitted with the quote regardless of whether a site visit was made or not. The technical approach write-up must not be a reiteration of the Statement of Work, but how your company plans on performing the tasks listed in the attached Statement of Work. (i.e. performance checklists, anticipated number of employees, anticipated hours at the facility and/or confirmation of supplies being provided, etc.) 2. Past Performance. The Offeror's past performance on related contracts will be evaluated to determine, as appropriate, successful performance of contract requirements, quality and timeliness of delivery of goods and services, cost management, communications between contracting parties, proactive management and customer satisfaction. The Government will use its discretion to determine the sources of past performance information used in the evaluation, and the information may be obtained from references provided by the Offeror, the agencys knowledge of Offeror performance, other government agencies or commercial entities, or past performance databases, and will be based on responsiveness, quality, and customer services. Quote shall include at least two references from at least two separate contracts for similar and relevant services including the phone number, full address, and e-mail address. Offerors lacking relevant past performance history, or for whom past performance information is either not available or has not been submitted to the Government, will receive a neutral rating for past performance. 3. Price. The Government will evaluate the price quote for completeness and reasonableness in relation to the RFQ requirements. Quoted prices must be entirely compatible with the Non-Price Technical Solution. 4. Transmission line must be Heliax brand name The Government intends to award a trade-off, single firm fixed-price purchase order on an all or none basis with payment terms of Net 30. (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offers specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of provision) STATEMENT OF WORK Requiring Office Name: National Severe Storms Laboratory 145026-24-0009 1. Background and Purpose The Advanced Technology Demonstrator (ATD) is a research radar platform for weather observations using Dual Polarization phased array technology. The ATD radar is owned and operated by the National Severe Storms Laboratory (NSSL) and is housed at the National Weather Radar Testbed (NWRT) facility located in Norman, Oklahoma. The ATD employs a Far-Field antenna range to capture antenna dynamics for both azimuth and elevation patterns. The Far-Field consists of an outdoor Calibration Tower located 426 meters (~1,400 ft) from the base of the NWRT facility. NSSL requires four independent transmission lines to be affixed to the Calibration Tower as stated below. Currently, the Calibration tower utilizes a low-loss Heliax transmission line that runs from the Calibration Tower base to the Calibration Horn Radome assembly that is 150 feet above the base. It has been used for the ATD since 2018. During 2023 radar operations, we realized the existing transmission line has an intermittent short, which causes calibrations of the ATD to be incorrect. We need to replace this current line and obtain a spare to preclude downtime in the future. Additionally, the ATD program is now five years old, and NSSL recognizes that future expansion and capabilities of the Calibration Tower are needed. Obtaining two additional transmission lines will be beneficial and allow for future growth, including a Dual Polarization standard gain horn that will require independent transmission lines for both Horizontal and Vertical Polarization signals. 2. Scope and Objectives To physically remove and dispose of the current Heliax transmission line affixed to the Calibration Tower and to procure and install four independent runs of Heliax transmission lines that are greater than 150 feet in length on the Calibration Tower (including any required supporting structures and mounting hardware). One primary transmission line will connect the Calibration Horn Radome assembly to the Calibration Tower base; the other three will be protected and reserved for future expansion. This work will require heights that can exceed 150 feet above ground level; any applicable licensing, certification, and training for working at heights must be followed. 3. Product Specifications The ATD operates at a center frequency of 3,020 MHz with a 25 MHz span centered at 3,020 MHz. The operating frequency band necessary for the transmission lines need to be at a minimum 2,700 to 3,100 MHz span. The Calibration Tower is a 150 Microflect self-supporting tower with an internal ladder. For RF transmission, it currently employs a continuous run of more than 150 ft of LDF5-50A, Heliax Low Density Foam Coaxial Cable, corrugated copper, 7/8 in, black PE jacket. LDF5-50A, Heliax Operational Characteristics: Cable impedance 50 ohm +/- 1 ohm Insulation resistance 100,000 MOhm Operating Frequency 1 5000 MHz Peak Power 91.0 KW Brand HELIAX VSWR 1.13 at 24.30 dB return loss Attenuation of 2.223 to 2.551 dB per 100 ft at 2,700 through 3,400 MHz frequency Average Power rated at 1.25 to 1.09 KW at 2,700 through 3,400 MHz frequency There is an operational need for a frequency response of a pulse duration to be relatively flat from 3,000 to 3,040 MHz with a +/- 1 dB ripple tolerance in power. The replacement transmission line and the additional transmission lines do not have to be the same model as the LDF5-50A, so long as the selected replacement model transmission lines meet or exceed the specifications above. The brand of the replacement transmission line shall be Heliax type. All four transmission lines shall be terminated with N-type Male connectors on both ends. In addition to the current cable ladder running from the base of the tower to the top of the tower for cable support, it may be necessary to add one or more cable ladders in support of the additional transmission lines. Site visits are highly encouraged for any potential bidders. Any site visit performed by a potential bidder shall be on their own accord and at no cost to the Government. All site visits need to be requested through the Contracting Officer and then once approved, coordinated through the local site personnel at NSSL. SERVICES The contractor shall remove the existing Heliax type transmission line (including any mounting hardware that was used to affix the existing Heliax type transmission line and discarded) affixed to the Calibration Tower and properly dispose thereof. The contractor shall procure new Heliax type transmission line that can provide four independent lines with maintenance loops at both the top of the tower and within the Calibration Tower Base shelter that may exceed 150 ft in continuous length with all new mounting hardware and supporting structures to enable installation. Sweep tests shall be conducted on all four transmission lines prior to installation on the Calibration Tower to ensure proper cable characteristics per the specifications above (2,700 to 3,100 MHz span). More specifically, the 3,000 to 3,040 MHz region shall be verified that the frequency response is relatively flat in accordance with the specification above (+/- 1 dB ripple tolerance in power). An S21 and an S12 function shall be conducted to verify the proper frequency response. All validated testing results shall be disclosed prior to the actual installation of the four transmission lines on the Calibration Tower and accepted by the Government. Once all specifications are properly verified and accepted by the Government, the contractor shall install the four independent transmission lines on the Calibration Tower, including any mounting hardware and supporting structures to enable installation. The four independent transmission lines shall be properly grounded to the tower structure at both ends. The contractor shall connect one of the four transmission lines to the current Calibration Tower infrastructure that the removed transmission line resided in, such as connecting the Calibration Tower base to the Calibration Horn Radome assembly. The contractor shall ensure that the remaining three installed transmission lines are properly waterproofed for non-use while affixed to the Calibration Tower (all connectors must be properly terminated on both ends). Proper grounding of all transmission lines shall be verified after installation. At the conclusion of all prescribed work herein, the contractor shall deliver a documented report of the validated testing results and submitted with the close-out documents. The documented work shall identify any issues incurred during and/or after installation, if any. SUPPLIES AND MATERIALS The contractor shall provide all equipment, supplies, and materials necessary to perform the work annotated above, to include the proper disposal of any and all hardware such as the existing Heliax transmission line slated for replacement. DOWNTIME NSSL site personnel will assist the contractor with de-energization, lockout-tagout, and starting/stopping operation of the Calibration Tower as necessary for the work specified. NOTE: THE FIGURE IS FOUND IN THE COVER PAGE. Figure: The Calibration Tower is a 150 Microflect self-supporting tower. RF equipment is located in the shelter at the base and connected to the antenna assembly (white radome near top) via Heliax low-loss RF transmission line. 4. Price Consideration (Do you require pricing by line item, one price for all items, pricing for options) Pricing shall be by a line item format (parts, labor and shipping to be charged separately). 5. Requested Delivery/Period of Performance Thirty days from the date of award is acceptable. 6. 12 month Option Period(s) Added N/A 7. Points of Contact for this Action TO BE PROVIDED AT TIME OF AWARD 8. Ship to Address: N/A. Please contact (TO BE PROVIDED AT TIME OF AWARD) for scheduling, building access, and if any items need to be shipped to NSSL.
Award Overview
Mentioned in the description
From description, unverifiedtional Weather Radar Testbed (NWRT) Facility INCUMBENT � There is no incumbent (i) This is a combin
We searched the solicitation description for the word “incumbent” and surfaced the surrounding text. This is not a confirmed match.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
1305M324Q0134- Combined Synopsis
- Combined SynopsisCurrentMar 15, 2024
Remove/Replace Brand Name Heliax Transmission Line
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Environmental Satellite, Data, and Information Service (NESDIS), Office of Satellite and Product Operations (OSPO) intends to award a sole-source, firm-fixed-price contract with a magnitude ranging from $7M to $10M to ATLAS Space Operations Inc., (UEI: LUU8R95P3JM3). The requirement is to procure scalable telemetry, tracking and command aperture services to deliver Satellite-to-Ground Communication Services. This requirement supports OSPO in accomplishing its mission of delivering environmental data from remote platforms. The scope encompasses site certification, telemetry downlink data services, and satellite commanding data services to satisfy future NESDIS requirements for commercial remote telemetry downlink for partner missions. Key supported missions include, but are not limited to: COSMIC-2, (the Constellation Observing System for Meteorology Ionosphere and Climate-2)/FORMOSAT-7 KOMPSAT-5, Korea Multi-Purpose Satellite-5 (KOMPSAT-5), and PAZ, Spanish Earth Observation Satellite The proposed contract action will be conducted using other than full and open competition procedures pursuant to the authority at 41 U.S.C. 3304(a)(1), as implemented by the Revolutionary Federal Acquisition Regulation (FAR) Overhaul (RFO) Subpart 6.103-1,Only One Responsible Source and No Other Supplies or Services will satisfy agency requirements. Justification for Non-Competitive Action: ATLAS is the only vendor that possesses the established, fully compliant ground station network and operational authorizations required to fulfill NOAA's mission objectives without catastrophic schedule disruption and unrecoverable cost growth. ATLAS currently holds all active, validated, and fully compliant international spectrum licenses and host-nation operating authorizations across the required equatorial downlink footprint. These authorizations are non-transferable. ATLAS represents the only evaluated source possessing the fully qualified, operational front-end processor architectures, automated scheduling APIs, and verified performance thresholds required to meet NESDIS data delivery requirements without introducing unacceptable integration costs, programmatic delays, and mission-critical data loss risks. Notice to Interested Sources: This Notice of Intent (NOI) is not a request for competitive proposals or quotations. However, in accordance with RFO 5.101, all responsible sources may submit a capability statement, which shall be considered by the agency. Information received will be evaluated solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to compete this proposed requirement based upon responses to this notice is solely within the discretion of the Government. Response Instructions: Capability statements or responses must be submitted electronically via email to the Contracting Officer to Ms. Trang Tran, at Trang.Tran@noaa.gov with a courtesy copy to Ms. Markita Simmonds, Contracting Specialist, at Markita.Simmonds@noaa.gov. Submissions must clearly demonstrate the technical capability, active international spectrum licenses, and host-nation authorizations required to meet the Government’s technical objectives. Concerned parties should address any questions, issues, disagreements, or recommendations to the Contracting Officer. | - | Special Notice | 11/05/2026 |
The Space Acquisition and Integration Office (SAIO), on behalf of the 21st Communications Squadron (21 CS) under Space Operations Command (SpOC) at Peterson SFB (PSFB), CO, is currently exploring the feasibility of consolidating several communications contracts across PSFB, Schriever SFB (SSFB), and Cheyenne Mountain Space Force Station (CMSFS). 02 November 2026 updated: CNECTS Final Teaming/Partnering Matrix The Final Teaming/Partnering Matrix has been updated and the previous version removed. All Official Government correspondence, infromation, schedules, deadlines, etc will be posted and released through sam.gov. Please continue to monitor for all official updates and information. 29 October 2026 updated: CNECTS CSO Release Delayed Due to continued mission challenges, the offical release of the CNECTS CSO will not be relased today. Government is revising the CNECTS acquisition schedule. The revised tentative schedule will be posted when available. The Government does not have additional information to share at this time. Interested parties should continue to monitor SAM.gov for all official CNECTS updates and announcements. Please note: ** Teaming/Partnering Matrix sign-up will expire at 3 PM today. The latest version of the spreadsheet has been provided and the final version will be uploaded on Monday, 2 Nov 2026. ** Previous tentative acquisition schedule has been removed. Again, continue to monitor for the lastest version. ** Please use this additional time to submit any questions related to the draft CSO and AOI. 20 October 2026 Updated: Providing a updated link to the CNECTS Teaming/Partnering Matrix Good morning, The link posted on 15 October 26 is no longer working. Here is an updated link to use below: https://forms.osi.apps.mil/r/LkHE57UpWm. Please copy link and paste in the browser. Also, I have uploaded a current copy of the Teaming/Partnering Matrix for your review since the count is up to 101. 15 October 2026 Updated: CNECTS CSO Official Release Schedule Update. Industry Partners, Due to mission challenges, the official release of the CNECTS Commercial Solutions Opening (CSO) will not occur today. The anticipated release schedule has slipped by approximately two weeks. A tentative updated milestone schedule is provided for planning purposes. All dates remain subject to change pending final coordination and approval. While awaiting the official solicitation release, please review the updated Questions and Answers (Q&As) posted today. To reduce confusion and eliminate conflicting information, previous legacy documents and postings have been removed. Additionally, the Teaming/Partnering Matrix has been reopened for two weeks. The matrix will close officially on 29 October 2026. Please select this link to add your companies' name to the Teaming/Partnering Matrix. https://forms.osi.apps.mil/r/LkHE57UpWmhttps://forms.osi.apps.mil/r/LkHE57UpWm Thank you for your continued interest in the CNECTS CSO. 01 October 2026 Updated: Released of Draft CNECTS Commercial Solutions Opening (CSO) and Areas of Interest (AOI) The Government is pleased to release the long-awaited draft Communications Network Engineering, Cybersecurity, and Information Technology Services (CNECTS) Commercial Solutions Opening (CSO). The draft CSO is being released to provide industry an opportunity to review the anticipated CNECTS approach, submission process, evaluation framework, and Areas of Interest (AOI) before official release of the CSO. The AOI is provided in Attachment 6, Areas of Interest (AOI), to the draft CSO. Industry shall not submit White Papers at this time. White Papers submitted in response to the draft CSO will not be reviewed, evaluated, or retained for consideration under the official CSO. Submission instructions, the applicable AOI, and White Paper due dates will be provided with the official CSO release. The Government anticipates official release of the CNECTS CSO on or about 15 October 2026. The draft CSO is substantially complete; however, the Government may revise the draft CSO, Attachment 6, submission instructions, evaluation approach, or anticipated schedule before official release. Industry is encouraged to review the draft materials and submit questions, comments, and recommended clarifications to the contracting officer at rosalind.davis.3@spaceforce.mil. The Government will consider industry's feedback as it finalizes the official CSO. This notice is for planning and information purposes only. It does not constitute a solicitation, request for proposal, commitment by the Government, or authorization to incur proposal-preparation costs. No award will result from this draft notice. 28 September 2026 Updated: CNECTS Draft Commercial Solutions Opening (CSO) and Areas of Interest (AOIs) Release Update The Government appreciates industry’s continued interest in the Communications Network Engineering, Cybersecurity, and Information Technology Services (CNECTS) requirement and thanks industry for its patience regarding the delayed release of the draft Commercial Solutions Opening (CSO). As the Government prepares for the anticipated official CSO release date of 15 October 2026, the Government is completing a final review of the draft CSO and associated Areas of Interest (AOIs). The Government’s intent is to release a draft that is substantially complete—approximately 90 percent complete—and that will not require major changes between the draft release and the official solicitation. The Government anticipates releasing the draft CSO and AOIs during the week of 28 September 2026. This anticipated release date is subject to completion of internal reviews and approvals. Industry is encouraged to monitor SAM.gov for the draft release and any subsequent updates. 15 September 2026 Updated: Posting of the Draft Revision Documentation Timeline To ensure the draft reflects the most recent updates, refined requirements, and the valuable leadership feedback captured during higher level reviews, the Government is adjusting the release schedule for the draft solicitation materials. Draft CSO Release Date: The draft Commercial Solutions Offering (CSO) document is now scheduled to be officially released on Friday, 18 September 2026. 28 August 2026 Updated: Posting of the Final CNECTS Teaming/Partnering Interest Spreadsheet 26 August 2026 Updated: Reopening of the CNECTS Teaming and Partnering Questionnaire 1. OVERVIEW & REOPENING ANNOUNCEMENT Due to this high volume of interest and to maximize opportunities for robust teaming, joint ventures, and prime/subcontractor relationships, the Government has reopened the Teaming & Partnering Questionnaire to allow additional interested parties to sign up. 2. IMPORTANT DEADLINES To ensure all new vendors are captured, we have established an new hard timeline: New Submission Deadline: Friday, 28 August 2026 at 1:00 PM MST. No submissions will be accepted after this time. Updated Matrix Release Date: The final, most updated CNECTS Teaming and Partnering Matrix spreadsheet will be released and available for public access on SAM.gov no later than 2:00 PM MST on Friday, 28 August 2026. 3. INSTRUCTIONS FOR NEW SUBMISSIONS If your company previously submitted a questionnaire and is already on the current matrix, no further action is required. If your company is not on the current matrix and wishes to be added, please complete the short questionnaire at the following link by the 1:00 PM MST deadline on August 28th. Ctrl + Click to follow this link: https://forms.osi.apps.mil/r/LkHE57UpWm 21 Aug 2026 Updated: Providing Updated Teaming/Partnering Spreadsheet 21 Aug 2026 Updated: Additional PDF version of the virtual industry day slides for ease of access 20 Aug 2026 Updated: Vitural Pre-Release Industry Day _Post-Event Release: Offical Release of the Informational Materials from the CNECTS Pre-Release Virtual Industry Day held on Wednesday, 19 August 2026. The following attachments are now publicly available in the "Attachments/Links" section of this notice: CNECTS_Virtual Industry_Day_Slides_19_Aug_2026.pdf: The official presentation slides, including the detailed technical and acquisition briefs. CNECTS_Virtual Industry_Day_Transcript.pdf: A written, word-for-word transcript of the entire briefing portion of the event. CNECTS_Virtual Industry_Day_Video Recording (DoD SAFE Transmission): Due to the large file size of the video recording, the file cannot be hosted directly on this portal. Interested parties must request access to the video via email. Upon receipt of your request, the Government will issue a DoD SAFE (Secure Access File Exchange) drop-off link to your designated email address, allowing you to securely download the video file. 2. TEAMING & PARTNERING OPPORTUNITIES To foster robust collaboration, joint ventures, and prime/subcontractor partnerships on this upcoming $330M requirement, the Government has compiled the responses from the Teaming and Partnership Questionnaire. CNECTS_Teaming_and_Partnering_Matrix.xlsx: This attached spreadsheet contains a consolidated list of all interested vendors, their business size/socioeconomic status, core capabilities, and contact information. How to Use: Industry partners are highly encouraged to review this spreadsheet to identify potential business partners to strengthen proposal teams. ⚠️ CRITICAL DISCLAIMER FOR INTERESTED PARTIES: Direct Industry-to-Industry Outreach: Industry partners are solely responsible for initiating contact and reaching out to one another to explore business partnerships. Independent Corporate Arrangements: Teaming agreements, joint ventures, and prime-subcontractor relationships are strictly private business arrangements between individual companies. No Government Guidance/Intervention: The Government is prohibited from assisting, intervening in, or providing guidance on the negotiation, execution, or structuring of private teaming arrangements. The Government's role is strictly limited to providing the contact spreadsheet to facilitate voluntary industry matchmaking. We want to thank all of our industry partners for the immense level of interest and participation shown during our Industry Day. The Government is actively consolidating and reviewing all of the feedback, questions, and insights gained during these sessions to refine and strengthen the draft acquisition documents. We sincerely appreciate your patience and understanding as we do our due diligence to solidify this major effort. 14 Aug 2026 Updated: Inquiries Regarding CNECTS 1-on-1 Meeting Schedule Clarification: Our #1 priority this week has been to capture and finalize the schedule for the initial block of 1-on-1 meetings taking place on August 20th and 21st. To provide an update on our overall scheduling status: The first 22 eligible small business companies have now been officially scheduled for August 20th and 21st. Calendar invitations with specific times and MS Teams links were sent directly to the designated Point of Contact (POC) today. If your company's request was submitted prior to the official deadline of August 5, 2026, at 9:30 AM MDT, but you were not in the first group of 22, your request is still valid. The CNECTS Program Manager will contact you to schedule your meeting for the overflow sessions occurring the following week (the week of August 24, 2026). If your request was submitted after the deadline, we regret that we are unable to accommodate your firm due to scheduling constraints. We highly encourage your participation in the main Virtual Industry Day on Wednesday, August 19, 2026. Thank you for your inquiry and your continued interest in the CNECTS requirement. We appreciate your patience as we work through the remaining schedule and look forward to your engagement. 13 Aug 2026 Updated: CNECTS Pre-Release Virtual Industry Day Information and More. 1. CNECTS PRE-RELEASE VIRTUAL INDUSTRY DAY: MS TEAMS DIAL-IN (AUGUST 19, 2026) The CNECTS Pre-Release Virtual Industry Day is open to all interested large and small businesses. No prior registration is required to attend this main session. Date: Wednesday, 19 August 2026 Time: 09:00 AM – 1:00 PM Mountain Standard Time (MST) Location: Virtual Only via Microsoft Teams Join the meeting on your computer, mobile app, or room device: Microsoft Teams meeting (Highlight, Copy & Paste the link below in the browser to access) Join: https://dod.teams.microsoft.us/meet/993644079118?p=bQaeu9hdFClT0ybufo Meeting ID: 993 644 079 118 Passcode: cR2cH2eb Need help? | System reference Dial in by phone +1 410-874-6740,,963402252# United States, Odenton Find a local number Phone conference ID: 963 402 252# 2. ONE-ON-ONE MEETING INVITATIONS SENT The Government has officially scheduled all calendar invitations for the Small Business One-on-One sessions. These calendar invites were sent today directly to the Point of Contact (POC) identified in your original request. Please check your inbox and spam/junk folders. Your invite contains the specific date, time, and private MS Teams link for your session. Note: If you received a prior email confirming you secured a slot but did not receive a calendar invite today, please contact the Contracting Office immediately. 3. TEAMING & PARTNERSHIP QUESTIONNAIRE The CNECTS effort is a large-scale acquisition, and the Government highly encourages teaming arrangements, joint ventures, and prime/subcontractor partnerships. To facilitate networking among industry partners, we are compiling an "Interested Vendors List" that will be distributed to all participants. If your company wishes to be included on this list to explore partnering opportunities, please complete the short questionnaire by Monday, 24 August 2026 at 12:00 PM MST. (Highlight, Copy & Paste the link below in the browser to access): https://forms.osi.apps.mil/r/LkHE57UpWm 05 Aug 2026 Update: CNECTS 1-on-1 Meeting Requests Closed This email is to inform you that the request window for the Small Business One-on-One meetings has officially closed. The final cutoff for submissions was today, August 5, 2026, at 9:30 AM MDT. Due to the late publication of our notice, we are implementing the following scheduling protocols to accommodate our industry partners: For Requests Received PRIOR to the Cutoff (Before 9:30 AM Today): If your request was submitted before the cutoff, your meeting is being accommodated. Due to high demand filling the original August 20th–21st window, your One-on-One meeting will be scheduled for the following week (week of August 24, 2026). The Program Manager will reach out to you shortly to coordinate your specific date and time. For Requests Received AFTER the Cutoff (After 9:30 AM Today): We regret that we cannot accept any further requests. All sessions are fully booked with over 40 requests received. If you secured a slot, you will receive a separate calendar invite shortly with your official appointment details and MS Teams meeting link. Even if you are not participating in a One-on-One session, we highly encourage you to attend the main Pre-Release Virtual Industry Day on Wednesday, August 19, 2026, for a comprehensive walk-through of the forthcoming Commercial Solutions Offering (CSO) and Area of Interest (AOI). Thank you for your time and your interest in supporting the Space Force mission. Respectfully, Rosalind Davis Contracting Officer Space Acquisition and Integration Office (SAIO) 28 July 2026 Update: Correction to Government POC Email Address for One-on-One Requests Primary POC: Rosalind Davis, Contracting Officer – rosalind.davis.3@spaceforce.mil 28 July 2026 Updated: SAVE-THE-DATE: CNECTS Pre-Release Virtual Industry Day & One-on-Ones The Space Acquisition and Integration Office (SAIO), on behalf of the 21st Communications Squadron (21 CS), is pleased to announce a Pre-Release Virtual Industry Day for the CNECTS acquisition. This event will provide critical updates on the CNECTS requirement, featuring a comprehensive walk-through of the draft Commercial Solutions Opening (CSO) and Area of Interest (AOI) document(s). Additionally, the Government will host virtual One-on-One meetings exclusively for new small business participants that have not had an opportunity to meet with the CNECTS acquisition team to ensure maximum opportunity for emerging partners to discuss their capabilities for he CNECTS requirements. 2. EVENT DATES & DETAILS Virtual Industry Day: Wednesday, 19 August 2026 Format: Virtual Only (MS Teams) Audience: Open to all interested industry partners. Key Focus: Detailed walk-through and Q&A session regarding the CNECTS draft CSO and AOI. Small Business One-on-One Meetings: Thursday, 20 August 2026 & Friday, 21 August 2026 Format: Virtual Only (MS Teams) Eligibility Requirement (CRITICAL): These sessions are strictly reserved for new small business participants that have not previously met with the CNECTS acquisition team. If your company has already engaged in a One-on-One for this requirement, please do not request a slot for these dates. Space is highly limited and will be allocated on a first-come, first-served basis for eligible firms. 3. ONE-ON-ONE REGISTRATION (OPEN NOW) 📝 Eligible small businesses may begin requesting their 1-on-1 time slots immediately. Space is highly limited and slots will be assigned on a first-come, first-served basis. How to Request: Email the Point of Contact listed below. Required Email Subject Line: CNECTS 1-on-1 Request - [Your Company Name] Information to Include in Request: Company Name & Unique Entity ID (UEI) Primary Point of Contact (Name, Email, Phone) Small Business and/or Socioeconomic Category (e.g., SDVOSB, WOSB, 8(a), HUBZone), if applicable Confirmation Statement: "We confirm that our company has not previously held a One-on-One meeting with the CNECTS acquisition team." 4. NEXT STEPS FOR THE VIRTUAL INDUSTRY DAY For general attendance at the Virtual Industry Day on August 19 (which does not require a 1-on-1 slot), formal MS Teams dial-in links and draft CSO/AOI materials will be posted here in the coming weeks. No registration is required for the main briefings on August 19. 5. POINTS OF CONTACT Submit your One-on-One meeting requests directly to: Primary POC: Rosalind Davis, Contracting Officer – rosalind.davis.3@spaceforce.mi 14 July 2026 Updated: Important Notice to Industry: Immediate Suspension of CMMC Phase II Requirements On behalf of the SAIO Acquisition Team, we want to ensure all industry partners are aware of a major policy announcement issued today by the Department of War (DoW) Chief Information Officer (CIO) and the Under Secretary of War for Acquisition and Sustainment. Effective immediately, the Department has suspended the Cybersecurity Maturity Model Certification (CMMC) Phase II requirements, which were originally scheduled to go into effect on November 10, 2026. What does this mean? While Phase II is suspended to reduce administrative barriers, the Department maintains a strict cybersecurity posture: Phase I Remains Active: All CMMC Phase I self-assessment requirements remain firmly in place. Contractual Enforcement Continues: Contractual enforcement of cybersecurity remains fully active. All defense contractors must still comply with DFARS 252.204-7012, which requires the implementation of NIST SP 800-171 security controls to protect Controlled Unclassified Information (CUI). 9 July 2026 Updated: General Status Updated Regarding the Acquisition Path and Timeline We appreciate your continued interest and your patience as we work through the pre-acquisition phases. This correspondence is to provide a general status update regarding the acquisition path and timeline: Current Review Status: The CNECTS follow-on is a highly complex acquisition that consolidates multiple legacy contracts across critical Space Force installations. At this time, several critical reviews and strategy documents have not yet been approved. Path Forward: Because of the technical and structural complexity of this effort, we are working diligently to secure all necessary senior-level approvals. As soon as we obtain a more definitive pathway and approved strategy, we will provide an updated milestone schedule to Industry. A Viable Requirement: We want to emphasize that this remains a highly viable contract action. The Government is fully committed to this consolidated effort and is actively progressing through the required regulatory steps. Virtual Industry Day: Due to the extensive delay between the initial Industry Day and the upcoming release of the CSO/Area of Interest (AOI), the Space Acquisition and Integration Office (SAIO) plans to host a Virtual-Only Industry Day. The purpose of this event will be to walk through the CSO and the specific AOI requirements prior to their release, aiming to address as many questions as possible before the official solicitation goes live. One-on-One Meetings: In conjunction with these updates, one-on-one (1-1) meetings will be offered to any new requesters that have not previously met with the CNECTS acquisition team. Due to high interest and resource constraints, we are unable to accommodate repeat meetings with previously engaged parties. As a reminder, when the solicitation is released, it will be executed as a 100% Small Business Set-Aside using the Commercial Solutions Opening (CSO) phased evaluation process. We encourage you to continue to monitor SAM.gov for all future updates, draft releases, and formal announcements regarding this requirement. Thank you again for your time, interest, and continued support of this mission. 10 June 2026 Updated: U.S. Small Business Administration (SBA) Decision At this time, the acquisition strategy has not been approved. Unfortunately, this process has taken longer than initially anticipated, and the Government is still actively working through the approval process. However, we are able to share an update regarding the SBA's decision: The SBA has officially released the two previous contracts—WICS II and PEDS—from the 8(a) program. Concurrently, the initially approved consolidated Justification and Approval (J&A) decision has been changed. Therefore, the CNECTS acquisition will now be competed as a 100% Small Business Set-Aside. Thank you all for your continued interest in the CNECTS acquisition. We appreciate your patience as we finalize the remaining acquisition strategy approvals. All interested parties are advised to continue to monitor SAM.gov for all formal notifications, updated timelines, and future releases of information regarding this requirement. | - | Special Notice | 12/23/2026 |
Notice of Intent to Sole Source to Tularosa Communications for 10Gbps/10Gbps Symmetrical Ethernet over Fiber The 49th Contracting Squadron on Holloman AFB, New Mexico has concluded their market research and intends to solicit, negotiate, and award a sole source firm-fixed price (FFP) Blanket Purchase Agreement (BPA) under RFO 12, Acquisition of Commercial Products and Commercial Services, to a small business: Tularosa Communications, CAGE 8FSL8. The proposed North American Industry Classification System (NAICS) code for this acquisition is 517810, with a small business size standard of $40.0 Million. This BPA will be to purchase10Gbps/10Gbps Symmetrical Ethernet over Fiber for use by all units on Holloman AFB. Market research has concluded that Tularosa Communications is the only vendor able to meet specifications for this requirement without significant expense to the government. The anticipated award date is 4 November 2026. This notice is not a request for competitive proposals or quotes. A determination by the Government not to compete this proposed action based upon responses to this notice is solely within the discretion of the Government. Although the Government intends to solicit and award a sole source Blanket Purchase Agreement under the authority of RFO 6.103-1(b), all responsible sources may submit a capability statement, a bid, proposal, or quotation which will be considered by the Government if received no later than 3 November at 5:00 PM MST. All information shall be submitted electronically to the following: Contract Administrator: SSgt David McKinney II, david.mckinney.9@us.af.mil Contracting Officer: Ms. Kitty Williams, katrina.williams.9@us.af.mil | - | Special Notice | 11/03/2026 |
| - | Awarded | Open | |
| - | Awarded | Open |
Additional Details
Solicitation Number
1305M324Q0134
Archive Date
Apr 9, 2024
Office Address
SEATTLE, WA, 98115