GovChime
Notice ID: 8d1d2eaf0acb401fa38c82b3cbcc4b28Combined Synopsis/Solicitation

SIDE A-FRAME REPAIR NOAA SHIP SHIMADA

Archived on March 7, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM UTC−05:00
Posted
February 16, 2024
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
336611: Ship Building and Repairing
Agency
Department of CommerceNATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION

Notice details

Office
DEPT OF COMMERCE NOAA
Place of performance
Marine Operation Center Atlantic 2002 SE Marine Science Drive, Newport, OR
Last updated
Dec 4, 2025

Identifiers

Solicitation number
1333MK24Q0034
Notice ID
8d1d2eaf0acb401fa38c82b3cbcc4b28

Description

THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6, AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTES ARE BEING REQUESTED AND A WRITTEN SOLICITATION WILL NOT BE ISSUED. THIS SYNOPSIS/SOLICITATION 1333MK24Q0031 CONSTITUTES A REQUEST FOR QUOTATION (RFQ) AND INCORPORATES PROVISIONS AND CLAUSES IN EFFECT THROUGH FEDERAL ACQUISITION CIRCULAR 2024-02. THE NATIONAL OCEANIC ATMOSPHERIC ADMINISTRATION (NOAA), OFFICE OF MARINE & AVIATION OPERATIONS (OMAO), NOAA SHIP SHIMADA IS REQUESTING REPAIRS TO THE SHIPS SIDE A-FRAME STOP TUBES. CLIN DESCRIPTION QUANTITY UNIT PRICE TOTAL PRICE CLIN 0001 VESSEL SERVICES: PROVIDE REPAIRS TO THE SIDE A-FRAME ONBOARD THE NOAA SHIP SHIMADA PER STATEMENT OF WORK. PERIOD OF PERFORMANCE: From February 19, 2024 - March 4, 2024 PLACE OF PERFORMANCE: NOAA SHIP SHIMADA MARINE OPERATION CENTER - PACIFIC 2002 SE MARINE SCIENCE DRIVE NEWPORT, OR. 97365 ADDITIONAL ITEM REQUIREMENTS (AIR): THESE ITEMS RELATE TO GROWTH WORK. THE RATES QUOTED WILL BE USED THROUGHOUT THE LIFE OF THE CONTRACT IF GROWTH WORK IS ADDED TO THE SCOPE OF THE CONTRACT [REFERENCE COMMERCE ACQUISITION REGULATION (CAR) CLAUSE 1352.271-72]. IF AIRS ARE ISSUED, THESE ITEMS WILL BE AWARDED AT THE QUANTITIES NEEDED VIA A CONTRACT MODIFICATION. ADDITIONAL WORK - LABOR AND MATERIAL **PROVIDE BREAKDOWN, AS FOLLOWS: AIRS/GROWTH HOURLY LABOR RATE REGULAR LABOR RATE__________________PER HOUR OVERTIME RATE ____________________PER HOUR HOLIDAY/WEEKEND OVERTIME RATE _________________PER HOUR AIRS/GROWTH MATERIAL MARKUP/HANDLING FEE ________________% MARKUP THE GOVERNMENT WILL AWARD A FIRM FIXED PRICE CONTRACT BASED ON BEST VALUE TO THE GOVERNMENT: AVAILABILITY, EXPERIENCE/ PAST PERFORMANCE, AND PRICE. THIS ACQUISITION IS A SMALL BUSINESS SET ASIDE THE NAICS CODE IS 336611 WITH A SIZE STANDARD OF 1300 EMPLOYEES, SHIP BUILDING AND SHIP REPAIR. THE PRODUCT SERVICE CODE IS J020. VENDOR SHALL ENSURE TO PROVIDE THE FOLLOWING INFORMATION OTHERWISE FAILURE TO PROVIDE OR MISSING DOCUMENTS MAY BE CONSIDER AS A NON-RESPONSIVE, AND COULD BE DISQUALIFIED FROM SOLICITATION. 1. REQUEST FOR QUOTES (RFQ) NUMBER. 2. PROVIDE A COPY OF YOUR CURRENT LIABILITY INSURANCE. 3. PLEASE PROVIDE NAME, ADDRESS, TELEPHONE NUMBER, COMPANY'S SAM UIE NUMBER. 4. A COPY OF THE FRONT PAGE OF THEIR SAMS REGISTRATION FROM SAM.GOV ENSURE IT IS UP TO DATE. 5. RETURNED THE FILLED SF1449 ATTACHED ALONG WITH AN ITEMIZED COST TO INCLUDE THE TOTAL AMOUNT PER ATTACHED STATEMENT OF WORK. 6. PROVIDE A COMPLETE AND ITEMIZED QUOTE SEPARATED BETWEEN PARTS, LABOR, TRAVEL IF APPLICABLE, AND THE TOTAL AMOUNT FOR THE JOB. 7. PROVIDE AVAILABILITY STATEMENT ON HOW SOON CAN START WORK (DATE). 8. INCLUDE STATEMENT SPECIFYING THE EXTENT OF AGREEMENT WITH ALL THE TERMS, CONDITIONS, AND PROVISION INCLUDED IN THIS RFQ. QUOTES THAT REJECT THE GOVERNMENT TERMS AND CONDITIONS ON THIS SOLICITATION MAY BE EXCLUDED FROM CONSIDERATION. 9. ACKNOWLEDGEMENT OF SOLICITATION AMENDMENTS (SF-30) IF ANY. 10. PROVIDE AT LEAST THREE REFERENCES FOR JOBS PERFORMED WITHIN THE PAST THREE YEARS THAT ARE THE SAME OR SIMILAR IN SCOPE SPECIFICALLY IN "VESSEL A FRAME REPAIRS". VENDOR SHALL PROVIDE A POINT OF CONTACT THAT INCLUDES NAME, TELEPHONE NUMBER, EMAILS AND A DETAIL DESCRIPTION OF THE SERVICE PERFORMED AND THE PRICE. ***ALL RESPONSIBLE SOURCES MAY SUBMIT A QUOTATION WHICH SHALL BE CONSIDERED BY THE AGENCY. *** ***QUOTES MUST BE SUBMITTED VIA ELECTRONIC MEANS (EMAIL) NO LATER THAN WEDNESDAY, FEBRUARY 21, 2024 AT 12:00PM EASTERN TIME (ET). TO ALEXANDER.CANCELA@NOAA.GOV*** THE GOVERNMENT DOES NOT ACCEPT RESPONSIBILITY FOR NONRECEIPT OF EMAIL. IT IS THE CONTRACTOR'S RESPONSIBILITY TO REQUEST A CONFIRMATION OF THE EMAIL RECEIPT. ***ALL QUESTIONS MUST BE SUBMITTED IN WRITING TO ALEXANDER.CANCELA@NOAA.GOV BY TUESDAY, FEBRUARY 20 2024 AT 12:00 P.M. ET. TELEPHONE INQUIRIES WILL NOT BE HONORED. **** CONTRACTORS ARE ENCOURAGED TO REGISTER WITH THE FEDBIZOPPS VENDOR NOTIFICATION SERVICE AS WELL AS THE INTERESTED VENDORS LIST FOR THIS ACQUISITION (SEE APPLICABLE TAB WITHIN FEDBIZOPPS WHERE THIS SYNOPSIS/ SOLICITATION IS POSTED). QUOTERS MUST BE REGISTERED IN THE SAM.GOV DATABASE TO BE CONSIDERED FOR AWARD. REGISTRATION IS FREE AND CAN BE COMPLETED ON-LINE AT HTTP://WWW.SAM.GOV/ PLEASE SEE ATTACHED CLAUSES AND PROVISION SF 1449 RFQ 1333MK24Q0034.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:1333MK24Q0034
  1. Combined Synopsis
  1. Combined SynopsisCurrentFeb 16, 2024

    SIDE A-FRAME REPAIR NOAA SHIP SHIMADA

    Notice 8d1d2eaf0acb401fa38c82b3cbcc4b28 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Purchase Order 1305M223PNMAN0444 was awarded to Mare Island Dry Dock, LLC for the FY24 Dry Dock Repairs to NOAA Ship OKEANOS EXPLORER. The total award value (Base Items, Option Items and Growth) is $6,374,904.00
88%
AwardedOpen
This is a Sources Sought Notice / Request for Information (RFI) only. This is NOT a Request for Proposal (RFP), Invitation for Bid (IFB), or Request for Quotation (RFQ). No solicitation is currently available. The U.S. Army Corps of Engineers (USACE), Jacksonville District, is conducting market research to identify potential sources that possess the expertise, capabilities, and experience to meet the requirements for Drydocking and repair services for USACE Vessels. A Virtual Industry Day is currently being contemplated, and a Microsoft Teams Link will be added to this notice. Currently, the Vistural Industry Day is scheduled for 15 December 2026, beginning at 9 am Eastern. A Site Visit is also being contemplated for 7 January 2027. Questions will be due on 17 January 2027 by noon Eastern. The U.S. Army Corps of Engineers - Jacksonville District has a requirement for the following boat troubleshooting and repair services: Hull and Structural Maintenance (per ER 750-1-1): Hull Inspection and Repair: Capability to perform ultrasonic thickness testing, steel plating repair/replacement, underwater hull repairs and cathodic protection testing and anode replacement, window, hatches and door maintenance and repair, and bilge and interior cleaning. Surface Preparation and Coating: Capability to perform abrasive blast cleaning and painting of the underwater body, freeboard, main decks and superstructure. Mechanical and Electrical Systems (per ER 750-1-1): Propulsion and Power: Overhaul and repair of main propulsion engines and auxiliary generators including the diesel engines, outboard gasoline engines, propulsion shaft, propeller, waterjet and rudder repair, HVAC equipment, hydraulic components and load handling equipment, galley and head equipment troubleshooting and repair, and boat trailer maintenance and repair. Piping and Electrical: Maintenance of all vessel piping, electrical installations, and onboard electronic equipment including bridge electronic systems, tank inspection, cleaning and repair, electrical system grooming and repair (12/24vdc and 120/240vac), Safety Systems: Servicing of life-saving appliances, fire detecting/extinguishing equipment, pollution prevention systems, life raft and associated safety equipment service and repair, intrusion detection and CCTV system maintenance and repair. Naval Architects/Marine Engineers to perform naval architecture analysis, determining crane safety, structural integrity, and stability during major conversions or rehabilitation. Qualified Paint/Coating Inspectors to oversee surface preparation and coating applications. These inspectors ensure compliance with standards established by the Steel Structures Painting Council (SSPC) and the National Association of Corrosion Engineers (NACE) / AMP. USCG/ABS certification inspections for vessels holding a Certificate of Inspection (COI) or load line to ensure compliance with Subchapter I and/or American Bureau of Shipping (ABS) classification rule. Marine Surveyor Services accredited by the National Association of Marine Surveyors (NAMS) or the Society of Accredited Marine Surveyors (SAMS) with at least 5 years of experience in commercial marine plant. They perform annual inspections and condition surveys. Marine Chemist to certify tanks and spaces as safe for hotwork/personnel. Vessel characteristics: Vessel Name/Type: Survey Vessel FLORIDA-II Length/Beam/Draft: 62’ / 24’ / 3’ Displacement: 42.5 tons Vessel Name/Type: Survey Vessel SALZER Length/Beam/Draft: 40’ / 13’-6” / 3’ Displacement: 14 tons Vessel Name/Type: Tug LEITNER Length/Beam/Draft: 50’ / 20’ / 8’ Displacement: 51.2 Tons Vessel Name/Type: Tug CHOBEE Length/Beam/Draft: 25’ / 16’ / 6’ Displacement: 25 tons Vessel Name/Type: Barge CFBC-1 Length/Beam/Draft: 104’ / 38’ / 8’ Displacement: 100-150 tons Vessel Name/Type: Barge CN-4 Length/Beam/Draft: 120’ / 45’ / 10’ Displacement: 150-200 tons Vessel Name/Type: Multiple Small Survey Vessels Length/Beam/Draft: 25-40’ / 7-12’ / 19” – 30” Displacement: 2.5 to 10 tons Specific Capabilities may include: Business and Contracting Capabilities (per EP 715-1-8): Experience with Local Conditions: Ability to navigate specific waterways to the facility, handle local environmental constraints, and manage seasonal weather impacts Drydocking and Facility Capabilities: Lifting/Docking/Blocking Capacity: Dimensions and tonnage capacity of the drydock, marine railway, or travel lift to safely accommodate the specific USACE vessel class. Location: Physical location of the shipyard to calculate transit time and fuel costs. Interested firms are asked to email the Contract Specialists, Ms. Brittany Jackson, at brittany.r.jackson@usace.army.mil, or Ms. Kelly Koger, at kelly.l.koger@usace.army.mil.
75%
Market Research01/17/2027
This is a combined synopsis/solicitation for commercial services prepared in accordance with FAR part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. Solicitation number W912EP26QA012 is issued as a request for quotation (RFQ), for inspection, repair, renewal, and modification of items as described in the attached SOW on a USACE 62-foot catamaran style Survey Vessel IAW with State, County, and Federal safety and environmental rules and regulations as well as within manufacturer and governing agencies rules, requirements, recommendations, and guidelines concerning the inspection and repair of marine vessels. The contractor must provide all tools, equipment and personnel (Marine Chemists, Surveyors, Welders, AMPP/NACE Paint and Corrosion Inspectors) for the performance of the Work Items. This acquisition is set-aside for small business concerns. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.
64%
Combined Synopsis06/26/2026
COMBINED SYNOPSIS / SOLICITATION Commercial Services | USCGC Maple Fuel System Repair Solicitation Number 52000PR270000400 Procurement Type Request for Quotations (RFQ) – Commercial Services Issuing Agency United States Coast Guard (USCG) Period of Performance TABLE OF CONTENTS 1. Solicitation Information. 3 2. Description of Solicitation. 3 3. Schedule of Supplies / Services (Price Schedule). 3 3.1 Vendor Information (To Be Completed by Offeror). 4 4. Scope of Work (SOW). 5 4.1 General Information. 5 4.2 Background. 5 4.3 Scope of Work Requirements. 5 4.3.1 Contractor Responsibilities. 5 4.3.2 Specific Work Items. 5 4.4 Condition Found Report (CFR) Requirement. 5 4.5 Materials & Parts. 6 4.6 Testing & Acceptance. 6 4.7 Deliverables. 6 4.8 Environmental & Safety Compliance. 6 5. Instructions to Offerors & Evaluation Criteria. 7 5.1 Instructions for Submitting Quotations. 7 5.2 Basis for Award. 7 6. Applicable Clauses and Provisions. 7 1. Solicitation Information Solicitation Number: 52000PR270000400 Procurement Type: Request for Quotations (RFQ) – Commercial Services Set-Aside Designation: Small Business Set-Aside Issuing Agency: United States Coast Guard (USCG) Unit / Vessel: USCGC Maple (Asset Type: CB-L, Hull Number: 22355) Location of Work: 2301 E Fort Macon Rd., Atlantic Beach, NC 28512 Period of Performance: TBD Unit Point of Contact (POC): MKC Rand Willette | Phone: 813-997-6886 | Email: Rand.a.willette@uscg.mil COR: Stephen Donithan |Stephen.W.Donithan@uscg.mil Contracting Officer (Contracting Actions only) |Joshua.C.Richardson2@uscg.mil 2. Description of Solicitation This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6 and FAR Part 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a separate written solicitation will not be issued. Solicitation Number 52000PR270000400 is issued as a Request for Quotation (RFQ). This acquisition is set aside 100% for Small Business concerns. All responsible small business sources may submit a quotation which shall be considered by the agency. 3. Schedule of Supplies / Services (Price Schedule) Contractors shall provide firm-fixed-price (FFP) quotations for the following Contract Line Item Numbers (CLINs): CLIN Description Qty Unit Unit Price Total Price 0001 Fuel System Repair and Fuel Polishing (USCGC Maple CB-L 22355): Provide all labor, materials, equipment, and supervision to replace high-pressure fuel pump, feed pump, fuel banjo, banjo gasket, fuel O-ring, and injectors due to water contamination; clean fuel cooler and lines; polish fuel; and conduct operational testing in accordance with the attached Scope of Work (SOW). 1 Job $__________ $__________ TOTAL Total Quoted Price $__________ 4. Scope of Work (SOW) 4.1 General Information Unit: USCGC Maple Asset Type: CB-L Hull Number: 22355 Location of Work: 2301 E Fort Macon Rd., Atlantic Beach, NC 28512 Period of Performance Dates: 10/25/2026 – 11/15/2026 Unit POC: MKC Rand Willette / 813-997-6886 / Rand.a.willette@uscg.mil 4.2 Background While underway, the 22355 received a fault code for low fuel rail pressure: Code MID:128 PID 164 FMI 1 on Engine SN A1186212. 4.3 Scope of Work Requirements 4.3.1 Contractor Responsibilities Provide all labor, materials, equipment, and supervision necessary to complete the work described. Comply with all applicable USCG policies, manufacturer specifications, and regulatory requirements. 4.3.2 Specific Work Items Work Item 1: Replace high pressure fuel pump, feed pump, fuel banjo, banjo gasket, fuel O-ring, and injectors due to water contamination. Clean fuel cooler and lines. Polish fuel. 4.4 Condition Found Report (CFR) Requirement If additional discrepancies, deficiencies, or required repairs are identified that are outside the defined Scope of Work, the contractor shall: Immediately notify the Unit POC. Submit a written Condition Found Report (CFR) detailing: Description of discrepancy Recommended corrective action Parts and labor breakdown Cost estimate Impact to schedule Note: No additional work outside the approved Scope of Work shall be performed without written authorization from the Government. Unauthorized work will not be reimbursed. 4.5 Materials & Parts Original Equipment Manufacturer (OEM) parts are required unless otherwise approved. Provide part numbers and specifications. All materials shall meet manufacturer and USCG standards. 4.6 Testing & Acceptance Conduct operational testing upon completion. Demonstrate proper functionality to the USCG representative. Provide written service report and warranty documentation. Work is considered complete upon Government acceptance. 4.7 Deliverables Itemized invoice Service report Parts list (with serial numbers, if applicable) Warranty documentation (if applicable) 4.8 Environmental & Safety Compliance Proper disposal of hazardous materials. Spill prevention measures required. Compliance with all federal, state, and local regulations. 5. Evaluation Criteria 5.2 Basis for Award Award will be made to the responsible Small Business offeror whose quotation conforms to the solicitation requirements and is most advantageous to the Government, price and other factors considered (Technical Capability, OEM Parts Compliance, Past Performance, and Price). 6. Applicable Clauses and Provisions The following Federal Acquisition Regulation (FAR) and Homeland Security Acquisition Regulation (HSAR) provisions and clauses apply to this solicitation and subsequent award: FAR 52.212-1 – Instructions to Offerors—Commercial Products and Commercial Services FAR 52.212-2 – Evaluation—Commercial Products and Commercial Services FAR 52.212-3 – Offeror Representations and Certifications—Commercial Products and Commercial Services FAR 52.212-4 – Contract Terms and Conditions—Commercial Products and Commercial Services FAR 52.212-5 – Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Products and Commercial Services (incorporating FAR 52.219-6, Notice of Total Small Business Set-Aside) FAR 52.232-40 – Providing Accelerated Payments to Small Business Subcontractors HSAR 3052.212-70 – Contract Terms and Conditions Applicable to DHS Acquisition of Commercial Items
63%
Combined Synopsis11/06/2026
This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This solicitation is issued as a Request for Quotation (RFQ) Number 52000QR270000684. This procurement will be processed in accordance with FAR Part 12. The North American Industry Classification System (NAICS) is 336611. The small business size standard is 1300. This is a total small business set aside; all responsible small business sources may submit quotations that will be considered. This synopsis/solicitation is issued pursuant to FAR 13.106-1(b), and the resultant purchase order will be awarded on a firm-fixed price basis using simplified acquisition procedures in accordance with FAR 13. THE UNITED STATED COAST GUARD SURFACE FORCE LOGISTICS CENTER AND THE CONTRACTING PROCUREMENT OFFICE CONDUCTED BY CG SEA-C21, REQUEST THE CONTRACTORS TO PROVIDE PRICING FOR THE FOLLOWING REQUIREMENT: Intent: While the vessel is moored pier side, clean the vessel’s U/W body and (pending inspection) renew bolt-on zinc anodes (if needed). Statement of Work (SOW) Requirement Summary: SEE ATTACHED SOW FOR DETAILS. CGC FREDERICK HATCH requires Clean/Inspect/Video Underwater (U/W) Body Surfaces (renew failed zinc anodes). 3.1 DEFINITE WORK. The Contractor must: 3.1.1 SUBMIT A PRE AND POST CLEANING VIDEO. 3.1.2 CLEAN AND INSPECT UNDERWATER BODY SURFACES. 3.1.3 SUBMIT FINAL REPORT. 3.2 OPTIONAL/CONDITIONAL WORK. 3.2.1 RENEW ANODES. 2. REFERENCES *Access to some drawings may be Export-Controlled and require any recipient to be registered in the Joint Certification Program (JCP) through DLA to receive the drawing. * COAST GUARD DRAWINGS None COAST GUARD PUBLICATIONS 154-WPC MPC B10015.D rev 10/31/24 154-WPC MPC B10018.D rev 04/30/25 3. PERIOD OF PERFORMANCE (POP) The POP for the requirement shall be between 12/01/26 - 12/11/26. Specific performance dates shall be coordinated with the Government POC to accommodate operational requirements. The contractor shall be available to perform the service during the specified POP window. 4. PLACE OF PERFORMANCE The primary place of performance shall be at CGC FREDERICK HATCH located at below address: CGC FREDERICK HATCH NAVAL BASE GUAM SANTA RITA Guam 96915 USA POC: MKC Paul Kurkowski Cell: (954) 999-7208 Email: Paul.J.Kurkowski@uscg.mil 5. SECURITY REQUIREMENTS All contractor personnel requiring access to the place of performance in order to perform work under this contract must possess a valid-state issued REAL ID-compliant driver’s license or identification card, or an acceptable alternative form of identification as defined by the Department of Homeland Security (DHS) [https://www.dhs.gov/real-id]. It is the contractor’s responsibility to ensure that all personnel are properly credentialed to gain base access. Failure to comply with access requirements may result in delays to performance and will not constitute an excusable delay. -------------------------------------------------------------------------------- Interested Vendors shall provide product/service details, Product Data Sheet, Technical Approach with proposed performance schedules, and cost breakdown of CLIN 0001 and optional CLIN 0002 IAW SOW for technical review. Vendors shall provide a detailed cost breakdown to include all the specifications to be reviewed by a technical rep. NOTE: The USCG/Government reserves the right to Award on an All or None Basis, i.e., the Government may issue a Purchase Order (PO) to the offeror that submits the lowest aggregate price, rather than issue a PO to each offeror based on the lowest quotation on each item. As stated below, the provision at FAR 52.212-2- Evaluation-Commercial Products and Commercial Services-applies with the following addenda: Award of a contract will be based on the following criteria: The purchase order will be awarded as a firm-fixed price contract using simplified acquisition procedures in accordance with FAR Part 13. 1. Please provide any warranty information. 2. Vendors MUST have an active registration in www.sam.gov BASIS FOR AWARD: BEST VALUE- TRADEOFF The USCG/Government intends to award a purchase order resulting from this synopsis/solicitation to the responsible contractor whose quote conforms to the solicitation and is most advantageous and the best value to the Government, price and other factors considered. The Government will utilize the simplified evaluation procedures outlined in FAR 13.106-2. The Government may select a higher-priced proposal when the demonstrated technical advantages or reduced performance risks justify the additional cost. As proposals become more technically comparable, price may become a greater determining factor. Evaluation Factors: Technical Capability Evaluation will consider the offeror’s demonstrated understanding of the SOW, proposed inspection and performance methodology, ability to renew Government-furnished components, and approach to minor modifications necessary to ensure proper fit of optional/conditional work. Performance Risk and Schedule Evaluation will consider the feasibility and credibility of proposed performance schedules, repair lead times, resource availability, and the offeror’s ability to complete required/optional services within the established period of performance. Past Performance Evaluation will consider the recency, relevance and quality of the offeror’s past performance on contracts of similar scope, and complexity. Consideration may include quality of workmanship, schedule adherence, contract compliance, and successful completion of comparable services. Price The Government will evaluate CLIN 0001 firm-fixed pricing and CLIN 0002 estimated pricing schedules for price reasonableness and overall evaluated cost for best value. CLIN 0002 estimates are for evaluation purposes only and Do Not Guarantee that conditional work will be authorized. Please Note: Interested Offerors having the expertise as required are invited to submit a Firm Fixed Price quotation that will be considered by the agency. Firm Fixed Price Proposals shall be detailed and include information from the SOW demonstrating an understanding of all the requirements in the SOW. ACCESS TO RESTRICTED TECHNICAL DATA- DISTRIBUTION STATEMENT D *Technical Data Access: Distribution Statement D — Critical JCP Certification Required. Drawings are not publicly posted on SAM.gov. Some of the technical data associated with this solicitation is marked Distribution Statement D and is restricted to the Department of War/Department of Defense (DoW/DoD) and U.S. DoW/DoD contractors. Interested vendors requiring access to the restricted technical data must possess an active certification under the United States/Canada Joint Certification Program (JCP). Information on the JCP, including application instructions, is available on the JCP website (https://www.dla.mil/logistics-operations/services/joint-certification-program/). Upon verification of the vendor’s active JCP certification, the Government will provide the restricted technical data outside of SAM.gov. Interested vendors are responsible for obtaining and maintaining the required JCP certification and requesting access to the restricted technical data sufficiently in advance of the solicitation closing date posted in this notice. Failure to obtain access to the restricted technical data will not constitute a basis for extension of the solicitation closing date. The Government is not responsible for delays associated with obtaining JCP certification or requesting access to the restricted technical data. Quotations must be submitted on company letterhead stationery and must include the following information: (1) Cost Breakdown (CLIN 0001 consists of Definite work items with sub-clins; CLIN 0002 consists of Option/Conditional Work Item(s).) (2) Unit Cost (3) Extended Price (4) Total Price (5) Payment Terms (6) Discount offered for prompt payment (7) Company Unique Entity ID (UEI) and Cage Code. CLIN 0002- OPTIONAL/CONDITIONAL REPAIR WORK: Offerors shall submit a separate estimated pricing schedule for CLIN 0002 identifying applicable rates/percentages/prices associated with the optional/conditional work item(s) that are Government-furnished property in accordance with paragraph 1.2 in the SOW, including minor modifications necessary to ensure proper fit. CLIN 0002 may be exercised at the time of contract award; however, no conditional repair work is authorized by its inclusion. Performance of CLIN 0002 shall be contingent upon completion of the contractor's inspection and submission of a Condition Found Report (CFR) in accordance with SOW paragraphs 3.1.2 and 3.1.3. Upon identification of necessary anodes to be replaced/renewed, a Contract Change Order Request (CR-001) would be submitted identifying proposed scope of repairs, quantities, and associated costs calculated using the established CLIN 0002 pricing schedule. The Contracting Officer shall review the CFR and CR to determine the necessity, scope, and price reasonableness of the proposed work. The Government reserves the right to authorize all, part, or none of the conditional repairs. No optional/conditional work shall commence without prior written Contracting Officer authorization through an appropriate contract modification. Any deviation from the established CLIN 0002 pricing shall require separate justification and approval. Quotes must be received no later than 20 November 2026 at 10:00 A.M. Eastern Standard Time. Email quotes are acceptable and shall be sent to Tim Ford at: Timothy.S.Ford@uscg.mil and carbon copy Contracting Officer, SKC Patricia Fremming at Patrica.M.Fremming@uscg.mil . Any questions or concerns regarding any aspect of the RFQ must be forwarded to Tim Ford at email address – Timothy.S.Ford@uscg.mil carbon copy Contracting Officer, SKC Patricia Fremming via email Patrcia.M.Fremming@uscg.mil. The following FAR Clauses and Provisions apply to this acquisition: FAR 52.204-7 – System for Award Management (Nov 2024). To facilitate payment, contractors shall be registered in SAM.gov with an active Unique Entity Identifier (UEI) prior to submitting a quotation. A UEI and SAM registration can be obtained via https://www.sam.gov. FAR 52.212-1 - Instructions to Offerors – Commercial Products and Commercial Services (Sep 2023) FAR 52.212-2 - Evaluation - Commercial Products and Commercial Services (Nov 2021) Award will be made to the Offeror proposing the Best Value to the Government considering specification, price, past performance and quality. FAR 52.212-3 - Offeror Representations and Certifications - Commercial Products and Commercial Services (Oct 2025) to include Alt I (Feb 2024). Offeror shall complete annual representations and certification electronically via the System for Award Management (SAM) website accessed through https://www.sam.gov. FAR 52.212-4 - Contract Terms and Conditions - Commercial Products and Commercial Services (Nov 2023) FAR 52.212-5 - Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services (Mar 2026) FAR 52.252-2 - Clauses Incorporated by Reference (Feb 1998) The following clauses, and others as directed by the Contracting Officer as applicable, shall apply to this awarded contract: FAR 52.217-5 - Evaluation of Options FAR 52.217-4 - Evaluation of Options Exercised at Time of Contract Award FAR 52.219-6 - Notice of Total Small Business Set-Aside (Nov 2020) FAR 52.219-28 - Post-Award Small Business Program Rerepresentation (Feb 2024) FAR 52.222-3 - Convict Labor (Jun 2003) FAR 52.222-19 - Child Labor Cooperation with Authorities and Remedies (Mar 2026) (E.O.13126). FAR 52.222-35 - Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212). FAR 52.222-36 - Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793). FAR 52.222-37 - Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212). FAR 52.222-50 - Combating Trafficking in Persons (Oct 2025) (22 U.S.C. chapter 78 and E.O. 13627). FAR 52.225-1 - Buy American Supplies (Oct 2022) (41 U.S.C. chapter 83). (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). FAR 52.232-33 - Payment by Electronic Funds Transfer - Systems for Award Management (Oct 2018) FAR 52.233-3 - Protest After Award (Aug 1996) FAR 52.233-4 - Applicable Law for Breach of Contract Claim (Oct 2004) *The above clauses are incorporated by reference, entire clause(s) available at https://acquisition.gov. NOTICE TO OFFERORS CONCERNING REPRESENTATIONS AND CERTIFICATIONS: This solicitation contains FAR Clause 52.204-7, System for Award Management and FAR Provision 52.204-8, Annual Representations and Certifications. In accordance with FAR 4.1201 (a), prospective contractors shall complete electronic annual representations and certifications via SAM accessed through https://www.sam.gov. Please ensure completion prior to submitting a quotation. Paragraph (b) of FAR 52.204-8 applies. System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in agency solicitations. Examples include 52.222-25, Affirmative Action Compliance, and paragraph (d) of 52.212-3, Offeror Representations and Certifications—Commercial Products and Commercial Services. Additional examples include 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services, and 52.213-4, Terms and Conditions—Simplified Acquisitions (Other Than Commercial Products and Commercial Services).
63%
Combined Synopsis11/20/2026

Additional Details

Solicitation Number

1333MK24Q0034

Archive Date

Mar 7, 2024

Office Address

KANSAS CITY, MO, 64106