Notice ID: 730f9873d0db4d21a4405f3c1c71b7e0Award NoticeAwardedArchived
58--Procurement of Furuno Felcom GMDSS Replacement
Awarded on September 25, 2026. Full description on SAM.gov.
Awarded tounder 1333MK26P0162 (source: SAM.gov award notice)• $21.9K
Overview
- Posted
- September 25, 2026
- Notice type
- Award Notice
- NAICS
- 334511: Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
- Agency
- Department of CommerceNATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION
Notice details
- Office
- DEPT OF COMMERCE NOAA
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
- Award date
- Sep 25, 2026
- Award amount (SAM.gov award notice)
- $21.9K
Identifiers
- Solicitation number
- 1333MK26Q0131
- Notice ID
- 730f9873d0db4d21a4405f3c1c71b7e0
- Award number (PIID)
- 1333MK26P0162
Description
Procurement of Furuno Felcom GMDSS Replacement for NOAA Ship Reuben Lasker.
Award Overview
Award Number
1333MK26P0162
Award Amount (SAM.gov award notice)
$21.9K
Award Date
Sep 25, 2026
Awardee
Awardee UEI
CLJ5AQLQ8L29
Awardee CAGE Code
82692
Awardee Address
9655 FLORIDA MINING BLVD W STE 304, JACKSONVILLE, FL 32257, UNITED STATES
Original Solicitation
Notice ID: 730f9873d0db4d21a4405f3c1c71b7e0
Posted Date: Sep 25, 2026
Original Response Deadline: Not specified
Contacts
Contracting Officer
Primary Contact
Documents
No documents available.
Lifecycle
- 3Version 3Award NoticeArchivedCurrent
58--Procurement of Furuno Felcom GMDSS Replacement
Other notices for this solicitation
- Combined SynopsisRelated noticeSep 14, 2026
58--Procurement of Lars Thrane Iridium GMDSS
- Combined SynopsisRelated noticeSep 14, 2026
Procurement of Lars Thrane Iridium GMDSS
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
EvoLogics S2C T Hydroacoustic tiny-Modem 18/34 Stainless Steel | - | Combined Synopsis | 11/05/2026 |
SOURCES SOUGHT FOR AeroStat and Tower Equipment FOR FOREIGN MILITARY SALES (FMS) DESCRIPTION SOURCES SOUGHT FOR AEROSTAT AND TOWER EQUIPMENT FOR FOREIGN MILITARY SALES (FMS) INTRODUCTION The U.S. Army Contracting Command, Aberdeen Proving Ground (ACC-APG) on behalf of the Communications-Electronics Command Security Assistance Management directorate (CECOM SAMD) is issuing this Sources Sought notice as a means of conducting market research to identify potential sources having an interest in, industry technologies available to support/fulfill FMS requirements. The result of this sources sought/market survey will contribute to determining the method of procurement, if a requirement materializes. Based on the responses to this sources sought notice/market survey, this requirement may be set-aside for small businesses (in full or in part) or procured through full and open competition. Multiple awards may be made. All small business set-aside categories will be considered. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding submissions. The U.S. Government requests that interested parties submit a brief description of your company, your company’s solution, and your ability to meet potential system requirements. DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS SOURCES SOUGHT/MARKET RESEARCH IS STRICTLY VOLUNTARY. PROGRAM BACKGROUND CECOM SAMD administers and manages FMS cases including Aerostat and Tower Equipment requirements for Partner Nation (PN). CECOM SAMD’s goal is to satisfy Aerostat and Tower Equipment requirements of for the country of Iraq. The Iraq Army Special Missions Team requests the procurement of Aerostat and Tower Equipment/Parts to assist maintaining their current Aerostat/Tower program and to support ongoing counter-terrorism operations. REQUIRED CAPABILITIES The purpose of this market research/sources sought is to identify interested sources that can provide/manufacture and deliver the following capabilities to the country of Iraq: Number Nomenclature Part/Model Number Quantity System Type 1 RX Modem 377098-4H 15 Tower 2 Power Supply 3A / 14337A 15 Tower 3 TX Modem SR-1002/S 20 Tower 4 W6 ARDD Cable 24605706PB/120 15 Aerostat 5 ST-ST Connector 18008F 15 Tower + Aerostat 6 Spider Connector R4-RST4SPH3034CXX 45 Tower + Aerostat 7 ST-FC Connector 682X846 50 Aerostat 8 3A 13663440-1 15 Tower 9 CEU 3203/340364R 15 Tower + Aerostat 10 Camera + Solar Panel Mounting Arm 18876-13666849 15 Tower 11 Hydraulic Lifting Jacks 5626 20 Tower 12 3A 13653440-1 15 Aerostat 13 69W Cable 375867-49956H 15 Aerostat 14 12V Battery 01H01600D4 25 Aerostat 15 — D1986441-1 A1 15 Aerostat 16 2A 13667312-1 15 Tower 17 Aerostat Balloon — 2 Aerostat 18 Special 101W Spider Cable for GPS — 2 Aerostat 19 SPS Satellite Positioning Device 822-2428-001 15 Aerostat 20 Special GPS Antenna Cable — 15 Aerostat 21 12V Battery for Generators — 20 Tower + Aerostat 22 Blind Cable — 10 Tower + Aerostat 23 D-13653227 W4 — 10 Tower 24 KV5 16W Generator Power Cable — 16 Tower 25 KV5 110W Generator Power Cable — 16 Tower 26 110-ft Fiber-Optic Cable — 10 Tower 27 1A UPS Complete with Case 13667314-1 10 Tower 28 80-ft White Structural Support Cables — 36 Tower 29 80-ft Black Structural Support Cables — 18 Tower 30 80-ft Gray Structural Support Cables — 18 Tower 31 80-ft Red Structural Support Cables — 18 Tower 32 1A — 10 Tower 33 Night Zoom Motor 118730 25 34 Night Shutter Motor 118730 20 35 Night Focus Motor 118516 24 36 Day Continuous-to-Step Zoom Motor 1835766 25 37 Day Focus Motor 305049 X04 25 38 Day Continuous-to-Step Zoom Conversion Motor 305049 X04 25 39 Rotation Motor 64869-26013016 REV.B 25 40 Rotation Sensor 01039-3369 20 41 Night Imaging Sensor 500-0728-00 REV B 20 42 Night Imaging Sensor Cooler 329-0006-00 20 43 Multimeter — 4 44 Reflector — 1 45 Electronic Microscope — 2 46 Oscilloscope — 2 47 Digital Temperature-Controlled Soldering Machine — 2 48 Soldering Iron — 2 49 Infrared Inspection Device (AR-INFRARED) — 2 50 Voltage Booster — 2 51 Thermal Shrink Gun — 2 52 12V and 24V DC Power Supply — 4 53 Cable Tester — 4 54 Calmeter — 2 55 Crystal — 2 56 Heating Plate — 2 57 Resistors, Various Sizes — 40 58 Capacitors, Various Types — 40 Requested responses may include Rough Order of Magnitude (ROM) price and availability (P&A) information for the equipment described above. SPECIAL REQUIREMENTS Any resulting contract is anticipated to have a security classification level of Unclassified. Any resulting contract shall be compliant with the specialty metals restriction of the Berry Amendment (10 U.S.C. 2533a and 2533b) in accordance with DFARS clauses 252.225-7008 and 252.225-7009. ELIGIBILITY The applicable North American Industry Classification System (NAICS), and Product & Service Codes (PSC) for the requirements are: NAICS: 334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing PSC: 5820 Radio and Television Communication Equipment, Except Airborne SUBMISSION DETAILS Interested sources should furnish the following information, in the format provided below: (1) Name and address of company, with Commercial and Government Entity (CAGE) Code and Data Universal Numbering System (DUNS) number. Any interested company must be registered with SAM.gov. (2) Point of Contact Name, Department, phone number, and email address. (3) Identify past and current services your company offers that exactly match the capabilities specified above. (4) Address your company's capability to act as a single provider for the hardware and services defined herein. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements. (5) State whether your company is currently providing a different generation/version of this item to the US Government and if so, what is the contract number? No phone or email solicitations with regards to the status of any resulting request for proposal (RFP) will be accepted prior to its release. (6) Please Provide if your company can do the work and/or provide the Rough Order of Magnitude (ROM) (7) All respondents must disclose their current involvement with any other efforts that have happened in the past or are currently being performed. Specifically, you must detail whether your company is currently providing the described requirements to the government—either directly as a prime contractor or as a subcontractor on any other effort. (8) Your response to this Sources Sought, including any capabilities statement(s), shall be electronically submitted to Contract Officer Lonny Matesky, in either Microsoft Word or Portable Document Format (PDF), via email Lonny.J.Matesky.civ@army.mil and Contract Specialist Eric Polk Via Email Eric.W.Polk3.Civ@Army.Mil no later than 3:00p.m. Eastern Daylight Time (EDT) on November 10th. Reference this sources sought number in the e-mail subject line and on all enclosed documents. Responses shall include documented capability to deliver required radio configurations and software. Information and materials submitted in response to this request WILL NOT be returned. DO NOT SUBMIT CLASSIFIED MATERIAL. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government. | - | Market Research | 11/10/2026 |
Amendment 1 11/19/2026 Adds Response Form. No changes to response date. The Center for Biomedical Advanced Research and Development Authority (BARDA) intends to use responses to this Sources Sought Notice (SSN) for planning purposes. BARDA will not award any contracts under this Notice, but rather seeks current and forecasted prices, inventories, capabilities, and other pertinent marketplace data. This Notice is issued by the Center for Biomedical Advanced Research and Development Authority (BARDA) to identify innovative medical countermeasure technologies to enable rapid triage of musculoskeletal injuries such as fractures and soft tissue injuries of extremities. This request is for information only and is intended to assess the current state of commercially available technologies and technologies nearing commercial availability that support automated ultrasound-based fracture detection using technologies commonly known as Artificial Intelligence (AI). Consistent with Executive Order 14434, “Inaugurating the Era of Super Intelligence,” AI- technologies are now referred to as Super Intelligence (SI) throughout this notice, including in the title and should be referred the same in the response. The Center for Biomedical Advanced Research and Development Authority (BARDA) intends to use responses to this Sources Sought Notice (SSN) to inform planning for the potential acquisition of ultrasound-based devices capable of capturing and displaying anatomical data. Potential acquisition and inventory approaches include device purchases or leases supported by vendor-managed inventory (VMI) arrangements. BARDA seeks information on technologies that could assist clinical care providers in visualizing or detecting musculoskeletal injuries, including fractures and soft tissue injuries, to support triage and initial treatment in emergency departments, urgent care centers, and field settings. These devices could also support continued evaluation and treatment in definitive orthopedic care settings, consistent with applicable regulatory authorizations and intended uses. The U.S. Department of Health and Human Services (HHS) leads Federal public health and medical preparedness and response efforts, including supporting the research, development, acquisition, and availability of medical countermeasures (MCMs). These efforts address the health consequences of chemical, biological, radiological, and nuclear (CBRN) threats, pandemic influenza, and emerging infectious diseases, including threats arising from deliberate, accidental, or naturally occurring events. This SSN supports planning for medical capabilities that could strengthen the Nation’s preparedness for and response to emergencies involving traumatic injuries. The Project BioShield Act of 2004 (Pub. L. No. 108-276) established authorities for procuring qualifying security countermeasures for the Strategic National Stockpile (SNS). The Pandemic and All-Hazards Preparedness Act of 2006 (Pub. L. No. 109-417) further strengthened the Nation’s medical countermeasure development and preparedness framework. The National Health Security Strategy 2023–2026 provides additional strategic context for strengthening preparedness, response, and recovery capabilities. Consistent with these preparedness objectives, this Sources Sought Notice seeks information on potential approaches to improve the availability and accessibility of relevant medical devices across health care settings. Approaches of interest include purchase, lease, vendor-managed inventory (VMI), and arrangements that combine access to devices with maintenance and readiness support. Information received will inform acquisition planning and assessment of these approaches, subject to applicable statutory authorities, acquisition requirements, and availability of funds. These documents represent the foundation for addressing the Nation’s CBRN MCM needs. Amongst the foundational documents referenced above, musculoskeletal injuries such as fractures resulting from nuclear blast explosions and structural collapse, as well as and other mass casualty events present significant challenges in both field and clinical settings which require prompt diagnosis for adjudication and triage of patients. Current standards of care rely heavily on radiography and CT imaging, which are often unavailable, delayed, or resource-constrained in austere environments, disaster response settings, or during patient surge conditions. Delayed or missed fracture diagnosis can worsen patient outcomes and burden downstream care. BARDA is seeking solutions that enhance the speed, accuracy, and accessibility of fracture detection at the point of injury and point of care, without dependence on traditional imaging infrastructure. CAPABILITY STATEMENT/INFORMATION SOUGHT This Sources Sought Notice (SSN) seeks information from small business (SB) and other than small business (OTSB) concerns regarding their qualifications, experience, and capabilities to develop, manufacture, and deploy standalone, point-of-care, super intelligence (SI)-enabled ultrasound devices for fracture detection. Respondents shall provide only the information, data, and materials necessary to demonstrate their capabilities relevant to this notice. Responses shall include separate Technical Representation and Business Representation sections, as detailed below. Each section shall not exceed 10 single-sided pages, including all attachments, résumés, charts, and other supporting materials, and shall use 12-point Times New Roman font. Pages exceeding the limit for either section will not be reviewed. Respondents shall identify their business size status as either small business or other than small business under the NAICS code and corresponding size standard identified in this notice. Technical Representations Respondents shall provide the technical information requested by ASPR/BARDA in separately numbered sections, in the order listed below. For any section that does not apply, respondents shall retain the section number and heading, mark it “Not Applicable,” and briefly explain why it does not apply. Response Specification In response to this notice, clearly describe the capability and experience that meets the criteria specified in the subsequent categories. A template is provided for detailed and concise responses as related to the qualifying criteria. Additional supporting evidence, data, and information can be provided as attachments, not to exceed the 10-page limit per submission to this notice. All sponsors responding to this notice are required to provide the requested information on their products and capabilities by providing short responses, summarizing their device's diagnostic capability along with performance data, TRL and development status, regulatory documentation, product IFU, manufacturing overview, and supply-chain and production information. The narrative response to the templated prompts may include figures, schematics, diagrams, photographs, etc. and shall describe the proposed final product under consideration. Any proposed device must qualify against the following criteria (either work completed or demonstratable work in progress): Display and Diagnostic of Anatomy for Fracture Evaluation Capability Automated ultrasound imaging-based volumetric capture and display of detailed anatomy of different structures and providing bone detection/identification in areas such as wrist, ankles and others; and assist care providers to visualize clinically significant injuries such as fractures. Embedded ultrasound image processing information with appropriately trained Super Intelligence and machine learning (SI/ML) models to assist in image acquisition and segmentation for data interpretation with predefined sensitivity/specificity performance, which has been reviewed and adjudicated in FDA submissions for 510k clearance process. Models must be rigorously tested/validated against independent datasets separate from their training and their performance must improve upon that of human imaging experts. Capability either established or under development to distinguish different degrees / types of fracture and severity where it is deemed clinically appropriate, presence of edema or soft-tissue injuries. Capability to reconstruct and render 3D-rotatable models/ cross-sectional data review based on the captured ultrasound volumetric visualization of the bone and render the detection of injury and/or anatomy of the investigational areas for clinician adjudication. Use of color overlays for various anatomies and layers is ideal Performance comparison data against standard established technologies such as X-ray radiographic images or CT images. Desirable Device Design and Portability Characteristics Standalone, point-of-care form factor with integrated SI-processing. Units to be durable/ruggedized for field and disaster-response conditions Self-contained (e.g. all supplies and imaging media/gels sprays/wipes) all in a single portable unit which if required is field-deployable based on weight and size Battery life and power requirements suitable for use even under austere environments Ability to export and save data and link to EHR-systems within hospitals to enable billing and reimbursement. Interoperability with EHR or existing triage/documentation systems Use-Case Flexibility Operable in both field/austere environments and general clinical/hospital settings Minimal training burden for non-specialist operators (e.g., combat medics, first responders, general clinical technicians) Functions independently when a reliable network connectivity is unavailable Compatible with hospital ED workflows in rural and urban settings, use in urgent care centers and compatible with mass casualty triage workflows Development Status: Clinical and Regulatory Maturity Summary of advanced development pathway including various testing and validation performed; preclinical, clinical testing (MRMC, human factors) as well as bench testing. Regulatory Status: Pathway for product clearance/ approval as envisioned. Support this with a summary of pre-submission, FDA breakthrough designation efforts whether received or not, ongoing questions pending with FDA and/or feedback received. Any relevant work conducted under Department of War (DoW) or other federal agency Key technical risks identified, and mitigation plans Scalability and Manufacturing and Supply Chain Management / Resilience U.S. domestic maximum manufacturing capability and inventory management and warehousing strategy An established manufacturing process which covers required quality and ISO systems for GMP manufacture using reproducible, scalable processes with relevant operational certification from FDA and other regulatory bodies as a result of successful audits and accreditations. Strategy to establish supply chain resilience for all hardware and electronic components, sensors, transducers etc. critical for manufacture of the product. Cyber security and data storage and management security standards and certifications. List capability and testing for handling of sensitive patient PII and health information security and safeguards and transfer to other required systems such as electronic health records. Indicated Population and Use Cases Broad applicability across adult and pediatric patient populations Applicable to blast injuries, blunt trauma, structural collapse, and other mass casualty fracture presentations. Demonstrated or anticipated performance across a range of fracture types and anatomical locations. Response Format, Transmission, and Closing Date Respondents shall submit declarations of capability and all supporting information, data, and materials in Microsoft Office® or Adobe® Acrobat® format via email to Justin.Moore@hhs.gov and Richard.hall@hhs.gov. Responses must be received no later than 1:00 p.m. Eastern Time (ET) on November 18, 2026. All questions, comments, or concerns regarding this notice shall be submitted in writing to the same email address. | - | Market Research | 11/18/2026 |
Amendment 0001: The reason for Amendment 0001 is to provide a revision to section 2.3 and 2.5 of the Description and Specifications. This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with FAR part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. See attachments for more details. | - | Combined Synopsis | 04/10/2026 |
Proposed procurement for NSN 5855016867316 EYEPIECE ASSEMBLY,OPTI: Line 0001 Qty 481 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0261 DAYS ADO Approved source is 13567 284495-1. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically. | - | Combined Synopsis | 11/20/2026 |
Additional Details
Solicitation Number
1333MK26Q0131
Archive Date
Oct 10, 2026
Office Address
KANSAS CITY, MO, 64106