GovChime
Notice ID: 1bf7d66b61034681866c57767b53ae89Sources SoughtArchived

Femtosecond Laser System

Archived on September 19, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM EDT
Posted
August 27, 2026
Notice type
Sources Sought
NAICS
334516: Analytical Laboratory Instrument Manufacturing
Agency
Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY

Notice details

Office
DEPT OF COMMERCE NIST
Place of performance
Gaithersburg, Maryland, 20899
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
1333ND-26-00088
Notice ID
1bf7d66b61034681866c57767b53ae89

Description

Sources Sought Notice and Request for Information for NIST Femtosecond Laser System

Notice ID: 1333ND-26-00088

Contract Opportunity Type: Sources Sought 

Response Date: September 4, 2026 

Product Service Code (PSC): 6650 – Optical Instruments, Testing Equipment, Components, and Accessories

NAICS Code: 334516 – Analytical Laboratory Instrument Manufacturing

Background 

The National Institute of Standards and Technology (NIST) Quantum Measurement Division (QMD) in the Physical Measurement Laboratory (PML) develops novel spectroscopic measurement techniques to probe key physicochemical properties of low dimensional, advanced quantum materials (i.e., 2D…) that will enable future technologies to move past conventional digital computing. Determining the fundamental processes of quasiparticles and related charge migration and phase change phenomenon are key aspects of work performed in QMD.

Additionally, the group studies alternative-state variables or information carriers, such as spin, phase, valley, etc., which will provide the foundation for lower-power electronics, optical switching, non-volatile memory, neuromorphic computing, and other technologies that are not possible with present material systems. Visible wavelength measurement systems, both in the linear and non-linear regime, enable detection of scattering, absorption, emission, and magnetism in these materials.

To support the group’s research activities and to measure the interaction of quasiparticles, including phonons, magnons and excitons, the Fundamental Electrical Metrology Group (FEMG) requires a fixed frequency, femtosecond laser system for multi-photon imaging within an already operating Raman microscope. Second harmonic generation (SHG) microscopy will be enabled with the new laser system.

This laser system shall be used for SHG studies of novel quantum nanomaterials at varying temperatures and magnetic/electric fields. The system must be compatible with the extensive existing spectroscopic infrastructure already in use. Due to space limitations the laser system must not require external cooling, such as that with water.

As part of the CHIPS Act, researchers from NIST are actively pursuing a comprehensive program in metrology research and development aimed at bolstering the U.S. semiconductor industry. A pivotal aspect of their strategic objectives is outlined in one of the seven Grand Challenges—specifically, Grand Challenge 1. This challenge focuses on enhancing metrology tools and measurement science dedicated to assessing the Purity, Properties, and Provenance of materials, which are critical for advancing the semiconductor sector.

A targeted initiative under this challenge involves the evaluation of the reliability of both two-dimensional (2D) and wide band gap (WBG) materials and devices. This evaluation is crucial for understanding the robustness and potential applications of these advanced materials in the semiconductor industry. To effectively conduct this research, and particularly to analyze the critical nonlinear optical spectroscopy responses of materials and devices, there is a need for a Femtosecond Laser System for Sum Harmonic Generation Microscopy (FLS4SHGM). This system must be specifically compatible with the existing Raman and photoluminescence spectroscopic instrumentation. The integration of such a laser system will greatly enhance the group’s capabilities and bandwidth in conducting optical experiments to study both linear and nonlinear processes in 2D materials.

Minimum Capabilities that NIST Requires and for Which Information is Being Requested 

I.             MINIMUM REQUIREMENTS

The respondent shall provide a system/product that meets all technical specifications identified below. All items must be new.  The use of “gray market” components are not authorized for sale in the U.S. by the Contractor is not acceptable.   All line items shall be shipped in the original manufacturer’s packaging and include all original documentation and software, when applicable.

Line Item 0001:

Description:  High-power ultrafast fiber laser system – Brandname of Equal to the FF Ultra 1050 II manufactured by Toptica Photonic Inc.

Unit of Issue: EA

Quantity: 1

•             Center wavelength: 1053 nm +/- 5 nm

•             Passively mode-locked fiber oscillator

•             High-power fiber amplifier

•             Air-cooled supply unit

•             Motorized group delay dispersion control

•             Average output power: > 4 W

Line Item 0002:

Description:  Acousto-optical modulator and driver electronics integrated in laser system – Brandname of Equal to the FF Ultra 1050 II AOM manufactured by Toptica Photonic Inc.

Unit of Issue: EA

Quantity: 1

•             Modulation bandwidth of >1 MHz 

•             Average output power:  > 4 W

Together items 1 and 2 must enable:

•             Pulse duration: < 100 fs (sech² fit)

•             Repetition rate: 80 MHz

•             Linear polarization: > 100:1 (>20 dB), vertical

•             Beam shape TEMoo, M² < 1.2, Ø 1.0 mm (1/e²)

•             Beam divergence (half angle): < 1 mrad

•             Output coupling via free-space

Safety

a.           The laser system system shall meet industry standards for safety, including those related to electrical components, mechanical components, and optical components.

Instructions for Responding to Respond to This Notice 

Parties that respond to this Notice are requested to submit the requested information via email in Microsoft Word, Adobe PDF, and/or Microsoft Excel format to the designated point(s) of contact whose name and email address appears at the bottom of this notice. Please provide only the information requested by this Notice, and do not include proprietary, classified, confidential, or sensitive information in a response to this Notice. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. 

Disclaimer: This Notice does not obligate the NIST to award a contract or otherwise pay respondents to this notice for information provided in response to this Notice. Following a review of the responses and market research, NIST may publish a solicitation on an authorized site, depending on the approved acquisition strategy. Responses received after the closing date for this Notice may not be considered. 

Information Requested in Response to This Notice: To help NIST with its market research, NIST is requesting that industry sources carefully review this notice and any attachments to it and voluntarily provide the following information:   

  1. Company Summary 

  • Notice Identification: Notice ID and Title of this posting. 

  • Corporate Details: Company name, physical address, website address, and Unique Entity Identifier (UEI). 

  • Point of Contact (POC): Name, phone number, and email address. 

  • Company Size Standard: Your company’s size status relative to the NAICS code provided in this Notice. (Refer to the SBA Table of Small Business Size Standards). 

  • System for Award Management (SAM) Registration: Indicate whether your company has an active registration for procurement purposes in SAM.gov. 

  1. Feedback for Draft Requirements 

  • Review the information included with this Notice, including any Attachment(s). Then, please provide suggestions to (a) improve clarity of it; (b) make it more competitive; (c) indicate whether there is anything that may inadvertently exclude domestically manufactured (made in the U.S.A.) end products from being considered; and (d) indicate if anything included with this Notice could potentially be revised to improve the ability for domestic (“Made in America”) end products to be considered; and (e) if a domestic end product is not currently available to meet the draft requirements/minimum specifications, please provide an estimated timeframe for when it may be domestically produced in the USA in the future if that appears to be likely. 

  1. Information Regarding Commercial Products and Related Commercial Services 

  • Provide specifications, company name of the original equipment manufacturer, and the country of manufacture for commercial products and/or commercial services that your company is legally authorized to sell and that may meet NIST’s minimum requirements.  

  • Standard Commercial Pricing: Provide your company’s standard commercial pricing information for the requirements described in this Notice (including any Attachments) and explain what is included in those standard commercial prices.  

  • Estimated Price Range: You may provide an estimated price or estimated price range for the draft requirements included in this notice, including a brief explanation of how it was derived. 

  • Standard Commercial Terms and Conditions: Provide a copy of the standard commercial terms and conditions for the commercial products and/or commercial services identified in your company’s response to this Notice, including the nature and the duration of applicable standard commercial warranty(ies). 

  1. Regulatory and Supply Chain Compliance 

  • Indicate whether your company could comply with RFO FAR clause 52.219-14 (Deviation JAN 2026) if this acquisition were to be set aside for small businesses (assuming that there is no waiver to the Nonmanufacturer Rule for the applicable NAICS code). Provide a brief supporting explanation. 

  1. Existing Governmentwide Contract Vehicles 

  • Indicate whether your company has its own GSA Multiple Award Schedule (MAS) contract or other federal contract vehicle(s) under which NIST could award an order and, if so, provide the details of the contract(s) (contract number, Contracting Officer name/contact, SOW, terms and conditions, and price lists). 

Important Notes 

This Notice does not obligate the Government to award a contract or otherwise pay respondents to this notice for information provided in response to this Notice. Following a review of the responses and market research, NIST may publish a solicitation on an authorized site, depending on the chosen acquisition strategy. Responses received after the closing date for this Notice may not be considered. 

There is no solicitation available at this time. 

The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. 

Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability. 

Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. 

THANK YOU 

We truly appreciate your company’s willingness to take the time to provide the above-mentioned information, which will be valuable in helping NIST complete its market research! 

For additional information, please contact the primary contact or, if named, secondary contact identified at the bottom of this notice. 

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

  1. 3
    Version 3Sources SoughtArchivedCurrent

    Femtosecond Laser System

    Notice 1bf7d66b61034681866c57767b53ae89 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
89%
Market Research12/05/2026
SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. SLAC National Accelerator Laboratory invites interested vendors to submit a proposal in accordance with the attached RFP preparation requirements for Carbide Laser System with OPA. Your full proposal must be received no later than Tuesday, November 24, 2026, 5pm PST. SLAC has a requirement for a U.S. domestic end item source of the following: Attached RFP_368506(RE)_Carbide_ Laser_System NOTE: The following documents are attached in this solicitation. RFP_368506(RE)_Carbide_ Laser_System.zip Must complete and return all documents mentioned in the cover letter. Please provide required documentation to the attention of Ryan Enos.
77%
Combined Synopsis11/24/2026
Answers to Questions attached. Questions are due by 11:00 AM Monday, 16 November 2026. The proposal due date has not been extended.
73%
Solicitation11/23/2026
(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested, and a separate written solicitation will not be issued. (ii) The solicitation number is 75N98027Q00072. This solicitation is issued as a competitive combined synopsis/solicitation for commercial products or commercial services restricted to the Brand Name specified herein in accordance with FAR 13.106-1(b)(1)(i). The Government intends to award a firm-fixed-price purchase order resulting from this solicitation using competition among the Original Equipment Manufacturer (OEM) and its authorized distributors. This acquisition is conducted under the authority of FAR 12.603, Streamlined Solicitation for Commercial Products or Commercial Services, and is not expected to exceed the simplified acquisition threshold. The National Institutes of Health (NIH), Office of the Director, Office of Acquisitions, on behalf of the National Heart, Lung, and Blood Institute (NHLBI), seeks to award a firm-fixed-price purchase order to the responsible offeror whose proposal represents the best value to the Government. (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-01, effective 03/13/2026. (iv) The associated NAICS code is 334516 (Analytical Laboratory Instrument Manufacturing), and the small business size standard is 1,000 employees. ¿ This requirement is unrestricted. (v) Description of Requirement: The National Heart, Lung, and Blood Institute (NHLBI), Laboratory of Advanced Microscopy and Biophotonics (LAMB), requires one (1) Brand Name Spectra-Physics (Newport Corporation / MKS Instruments) InSight® X3¿ Dual Ultrafast Laser System to integrate with an existing Thorlabs Veneto inverted multiphoton microscope for Fluorescence Lifetime Imaging Microscopy (FLIM) and Stimulated Raman Scattering (SRS) pump-probe experiments studying the effects of chemotherapeutic agents on cellular metabolism.
72%
Combined Synopsis11/20/2026
1. Disclaimer THIS IS A SOURCES SOUGHT NOTICE ONLY. This notice is issued solely for information and market research planning purposes. It does not constitute a Request for Quotation (RFQ), Request for Proposal (RFP), or Invitation for Bids (IFB), nor does it restrict the Government to a particular acquisition approach. No contract or purchase order will be awarded from this announcement, and the Government will not reimburse respondents for any costs incurred in preparing a response. 2. Background and Purpose The National Institutes of Health (NIH), Office of the Director, Office of Acquisitions,, Eunice Kennedy Shriver National Institute of Child Health and Human Development (NICHD), Section of Cell Cycle Regulation, has a requirement for a Brand-Name Lonza 4D-Nucleofector® System consisting of the following: 4D-Nucleofector Core Unit, Part No. AAF-1003B – Quantity (1) EA 4D-Nucleofector X Unit, Part No. AAF-1003X - Quantity (1) EA 3. One-year warranty extension for each unit. Or a functional domestic equivalent, to support ongoing NIH-funded research involving the genetic manipulation of mammalian cells. Because NICHD's ongoing studies rely on previously validated electroporation pulse-code workflows, experimental protocols, and Nucleocuvette™ consumables established on a prior-generation Lonza Nucleofector platform, the Lonza 4D-Nucleofector® System is the primary known platform capable of ensuring experimental reproducibility and data continuity without requiring costly and time-consuming protocol re-optimization or re-validation. The Office of Acquisitions is conducting market research to identify qualified vendors—including small businesses, authorized distributors, and domestic manufacturers—and specifically seeks market information to determine: 1. Authorized Lonza Sources: The availability of Lonza Walkersville, Inc. or authorized distributors/resellers (including small businesses, HUBZone, 8(a), SDVOSB, WOSB, and Small Disadvantaged Businesses under NAICS 334516) capable of supplying new Lonza equipment with full manufacturer-backed warranties. 2. Buy American Act (FAR Part 25) Compliance: The availability of any domestic end products manufactured in the United States capable of meeting all functional, warranty, training, and legacy workflow-continuity requirements outlined in Section 3 without requiring experimental re-validation. 3. Technical Requirements and Salient Characteristics To meet the Government's minimum requirements, the proposed system must satisfy all functional and technical specifications from the Statement of Work alongside the laboratory's workflow-continuity constraints: Core Control Unit: The system shall include a Lonza 4D-Nucleofector® Core Unit (or a domestic equivalent central control unit) capable of controlling and operating advanced electroporation-based transfection protocols. Small-Volume Transfection Module: The system shall include a Lonza 4D-Nucleofector® X Unit (or a domestic equivalent functional module) capable of processing small-volume samples (specifically ranging from 20 µL to 100 µL) and supporting transfection of primary cells and other difficult-to-transfect cell types. Nucleic Acid & Reagent Delivery: The system shall support delivery of plasmid DNA, RNA, siRNA, CRISPR/Cas9 reagents, and other nucleic acid-based materials into mammalian cells. Optimized Transfection Performance: The system shall provide optimized electroporation programs designed to maximize transfection efficiency while maintaining high post-transfection cell viability. Sensitive Cell Applications: The system shall support research applications involving primary cells, stem cells, immune cells, and other sensitive cell populations that are not efficiently transfected using conventional lipid-based methods. Software and Protocols: The system shall include manufacturer-provided software and protocols necessary for operation of the instrument. Warranty Coverage: The system shall include a minimum one-year manufacturer warranty and one-year warranty extension coverage for both the Core Unit and X Unit (two years total coverage). Warranty coverage shall begin upon Government acceptance of the equipment and continue in accordance with the manufacturer's warranty terms. Consumable & Legacy Protocol Continuity: If proposing Lonza equipment, the system shall be 100% compatible with commercially available Lonza Nucleofector® reagents, Nucleocuvette™ consumables, and existing pulse-code workflows previously developed and validated on a prior-generation Lonza Nucleofector platform. If proposing a domestic alternative, the vendor must demonstrate that its system and consumables achieve equivalent transfection efficiency and post-transfection cell viability across NICHD's existing mammalian cell workflows without requiring protocol re-optimization or experimental re-validation. Delivery, Installation, and Training: Equipment must be delivered to NIH Bethesda (Building 49) and installed, with on-site or virtual user training for up to five (5) NIH personnel completed within 30 days of installation (covering system operation, software functionality, routine maintenance, and basic troubleshooting). All delivery, installation, and training shall be completed within the 12-month period of performance from award. 4. Capability Statement Submission Instructions Interested organizations that believe they can meet all requirements outlined in Section 3 are invited to submit a tailored Capability Statement (no more than 5 pages) containing the following information: 1. Company Profile: Organization name, mailing address, primary Point of Contact (name, title, email, and telephone number), SAM.gov Unique Entity ID (UEI), and CAGE code. 2. Business Size & Socioeconomic Status: Business size under NAICS 334516 (1,000-employee size standard) and applicable socioeconomic designations (e.g., Small Business, Woman-Owned, Veteran-Owned, Service-Disabled Veteran-Owned, HUBZone, 8(a)). 3. Contract Vehicles: Identification of any existing federal contract vehicles held by the vendor through which this equipment can be ordered (e.g., GSA Multiple Award Schedule), or confirmation of open-market availability. 4. Country of Origin (COO): Explicit identification of the manufacturing country of origin for all proposed hardware components and confirmation of whether the system qualifies as a domestic end product under the Buy American Act (FAR Part 25). 5. Technical Capability & Authorization: Product brochures, technical specifications, and catalog numbers demonstrating compliance with every requirement in Section 3. If proposing Lonza equipment: Documentation confirming status as an Authorized Distributor/Reseller eligible to provide new equipment and manufacturer-backed warranties. If proposing a domestic alternative: Technical evidence proving equivalent transfection performance and workflow continuity with existing NICHD mammalian cell protocols without requiring experimental re-validation. 6. Rough Order of Magnitude (ROM) Pricing (Optional): Non-binding budgetary pricing estimate for market research purposes. 5. Place of Performance: NIH, 9000 Rockville Pike, Bethesda, MD 20892 6. Submission Deadline and Contact Information Please submit electronic Capability Statements in PDF or Microsoft Word format via email to Tina Robinson at robinsti@mail.nih.gov no later than November 18, 2026, at 11:00 AM EST. Telephone inquiries will not be accepted. Capability Statements must reference Notice Number 75N98027R00019. Email submissions and any questions must be sent to robinsti@mail.nih.gov and include Notice Number 75N98027R00019 in the subject line. Capability Statements and attachments will not be returned to the sender. This synopsis is for information and planning purposes only and shall not be construed as a commitment by the Government, nor will the Government pay for information solicited.
66%
Market Research11/18/2026

Additional Details

Solicitation Number

1333ND-26-00088

Archive Date

Sep 19, 2026

Office Address

GAITHERSBURG, MD, 20899