GovChime

Materials Testing Stage

Overview

Response deadline
8:00 AM UTC−04:00
Posted
July 30, 2020
Notice type
Special Notice
Agency
Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY

Notice details

Office
DEPT OF COMMERCE NIST
Last updated
Apr 29, 2026

Identifiers

Solicitation number
1333ND20QNB640536
Notice ID
dcad625f243446cb86337ba655c56685

Description

NOTICE TO SOLE SOURCE DESCRIPTION: The National Institute of Standards and Technology (NIST) intends to negotiate on a sole source basis, under the authority of FAR 13.106-1(b) (1), with Psylotech, Inc. located at 1616 Payne St., Evanston, IL, 60201, to fulfill the below requirement. The sole source justification is based on the following: The Material Measurement Laboratorys Materials Measurement Science Division (MMSD) conducts research on the development of innovative metrologies and measurement protocols for micro/nano-scale heterosystems analysis. Measurement techniques are used to determine sample composition as well as structural, electronic, and chemical properties of a wide variety of organic, inorganic and biomolecular systems where materials of interest are typically present as either micro/nano-scale features or monolayer/multilayer films. To meet mission requirements, the MMSD needs to procure a PsyloTech materials testing stage/station. The requested procurement is to support a cooperative research and development agreement between NIST and a corporate partner, by assembling a working instance of a materials testing stage/station based on a design that was developed, tested, and is in use by the CRADA collaborators. The required materials testing stage/station used in the replicate CRADA collaborators analysis system requires the following items from PsyloTech: a ?TS 1.6kN premium micro test system with NIST traceable high resolution load cell, local displacement sensor, universal testing hub, PC control unit and PsylotestTM and LabViewTM software, one set of clamp tension grips, TTL 5v triggering card, and jog/stop hand pendant; a convection temperature chamber with solenoid gas inlet; wrap around tension grips; wrap around grip customization; dog bone tension; mini dog bone tension; 3 point bending; Arcan compression grips; and platform grips. To maintain performance and interoperability of the systems and collected data, MMSD requires a Materials Testing Stage that is pin-to-pin compatible to the above items. Any deviation from compatible components would result in a reduced level of performance, an increase in experimental uncertainty, and potentially extensive costly reengineering and retrofitting. The resulting purchase order will be a Firm Fixed Price purchase order. The NAICS Code is 334516 with a size standard of 1000 employees. No solicitation package will be issued. This notice of intent is not a request for competitive quotations; however, interested parties who regard themselves as capable of fulfilling these requirements are invited to submit responses to the Government for consideration. Responses received by 8:00 am EST August 6, 2020, will be considered by the Government. A determination by the Government not to compete the proposed acquisition based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:1333ND20QNB640536
  1. Special NoticeCurrentJul 30, 2020

    Materials Testing Stage

    Notice dcad625f243446cb86337ba655c56685 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Simplified Acquisition - Signature Device Carts materials
73%
Solicitation10/06/2026
Sources Sought Notice for Graphite Furnace Atomic Absorption Spectrometer Notice ID: NIST-MML-FY27-SS01 Response Date: 11/28/2026 Product Service Code (PSC): 6640 NAICS Code: 334516 Background The Inorganic Chemical Metrology Group (ICMG) uses at least two measurement methods, each based on orthogonal physical principles, to certify the trace elements in candidate standard reference materials (SRM). These SRMs are intended for method validation and quality assurance in trace-element measurements to assess the nutritional value and contaminant status of agricultural products. A sensitive trace-element detector, a graphite furnace atomic absorption spectrometer (GFAAS) is sought to complement the group's inductively coupled plasma mass spectrometric (ICP-MS) measurement capability and fulfill the two independent method requirements for SRM development. Consideration will be given to GFAAS capable of direct solid-sample analysis to maximize its orthogonality relative to the liquid-sampling-based ICP-MS technique. Minimum Capabilities that NIST Requires and for Which Information is Being Requested The National Institute for Standards and Technology (NIST) located in Gaithersburg, MD is seeking information on vendors that are capable of providing a graphite furnace atomic absorption spectrometer (1) capable of measuring liquid test samples with an instrument detection limit (DL) for Cu at 0.02 µg/L or better (324.8 nm line, 50 µL sample volume, DL=3 x standard deviation of 10 replications) and (2) designed for direct introduction of solid state test samples into the graphite furnace for analyte quantification without a need of sample digestion Instructions for Responding to This Notice Parties that respond to this Notice are requested to submit the requested information via email in Microsoft Word, Adobe PDF, and/or Microsoft Excel format to the designated point(s) of contact whose name and email address appears at the bottom of this notice. Please provide only the information requested by this Notice, and do not include proprietary, classified, confidential, or sensitive information in a response to this Notice. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Information Requested in Response to This Notice: To help NIST with its market research, NIST is requesting that industry sources carefully review this notice and any attachments to it and voluntarily provide the following information: Company Summary Notice Identification: Notice ID and Title of this posting. Corporate Details: Company name, physical address, website address, and Unique Entity Identifier (UEI). Point of Contact (POC): Name, phone number, and email address. Company Size Standard: Your company’s size status relative to the NAICS code provided in this Notice. (Refer to the SBA Table of Small Business Size Standards). System for Award Management (SAM) Registration: Indicate whether your company has an active registration for procurement purposes in SAM.gov. Review the information included with this Notice, indicate whether there is anything that may inadvertently exclude domestically manufactured (made in the U.S.A.) end products from being considered; and indicate if anything included with this Notice could potentially be revised to improve the ability for domestic (“Made in America”) end products to be considered; and if a domestic end product is not currently available to meet the draft requirements/minimum specifications, please provide an estimated timeframe for when it may be domestically produced in the USA in the future if that appears to be likely. Information Regarding Commercial Products and Related Commercial Services Provide specifications, company name of the original equipment manufacturer, and the country of manufacture for commercial products and/or commercial services that your company is legally authorized to sell and that may meet NIST’s minimum requirements. Standard Commercial Pricing: Provide your company’s standard commercial pricing information for the requirements described in this Notice (including any Attachments) and explain what is included in those standard commercial prices. Estimated Price Range: You may provide an estimated price or estimated price range for the draft requirements included in this notice, including a brief explanation of how it was derived. Standard Commercial Terms and Conditions: Provide a copy of the standard commercial terms and conditions for the commercial products and/or commercial services identified in your company’s response to this Notice, including the nature and the duration of applicable standard commercial warranty(ies). Regulatory and Supply Chain Compliance Indicate whether your company could comply with RFO FAR clause 52.219-14 (Deviation JAN 2026) if this acquisition were to be set aside for small businesses (assuming that there is no waiver to the Nonmanufacturer Rule for the applicable NAICS code). Provide a brief supporting explanation. Existing Governmentwide Contract Vehicles Indicate whether your company has its own GSA Multiple Award Schedule (MAS) contract or other federal contract vehicle(s) under which NIST could award an order and, if so, provide the details of the contract(s) (contract number, Contracting Officer name/contact, SOW, terms and conditions, and price lists). Important Notes This Notice does not obligate the Government to award a contract or otherwise pay respondents to this notice for information provided in response to this Notice. Following a review of the responses and market research, NIST may publish a solicitation on an authorized site, depending on the chosen acquisition strategy. Responses received after the closing date for this Notice may not be considered. There is no solicitation available at this time. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted.
73%
Market Research11/28/2026
73%
Market Research12/05/2026
73%
Market Research12/03/2026
70%
AwardedOpen

Additional Details

Solicitation Number

1333ND20QNB640536

Archive Date

Sep 30, 2020

Office Address

GAITHERSBURG, MD, 20899