AUTOMATED PICOLITER LIQUID DISPENSER - A002
Overview
- Response deadline
- 9:00 AM UTC−06:00
- Posted
- April 22, 2021
- Notice type
- Combined Synopsis/Solicitation
- Agency
- Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
Notice details
- Office
- DEPT OF COMMERCE NIST
- Place of performance
- Boulder, CO, 80305
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- 1333ND21QNB680181
- Notice ID
- 5c6301ddb7df4eefae75d791c7ab636e
Description
This is a Combined Synopsis Solicitation. Please see attached RFQ. ************************************************************************************************************************************************* Question(s) and Answer(s) are posted to this RFQ per Amendment A001. No SF-30 is available for signature. 1. Do you know the size of the wafer? Answer: We use four-inch wafers. 2. Do you know how many dispense tips the end user requires? Answer: There is no specific number we require, but we plan to dispense material that may clog the tips. We need to be able to replace them regularly ourselves on-site at NIST The RFQ closing date remains unchanged. ************************************************************************************************************************************************* Question(s) and Answer(s) are posted to this RFQ per Amendment A002. No SF-30 is available for signature. 1. What kind of fluid is being dispensed? Viscosity, concentration, solvent, description of the fluid, datasheet, Answer: The fluid will be water or alcohol. There will be salts and a variety of other chemicals dissolved in the fluid. 2. If the fluid contents particle, how big they are and their concentration? Answer: No particles will be dispensed. 3. Dispensing volume: single dispensing volume and throughput per second. Answer: We require single drop volumes between 100 pL and 50 nL. There is no throughput requirement. 4. How many dispenser heads do you need at the same time? Answer: One. 5. Size of the substrate/chip and the printed area? Answer: Substrate is 4 inch wafer. Printed area down to (100 microns)^2 6. Requirements for substrate fixation? Answer: Some method to stop the substrate from moving is required, but not specified. 7. Layout of the printed structure (dot matrix, lines, homogeneous area, )? Answer: Dot matrix 8. Do you are interested in the option to upgrade the system to more dispenser heads later? Answer: No. 9. Moving range for the xy positioning system (computer programmed automated liquid dispensing system) e.g. 200mm x 200mm, 300mm x 300mm, ? Answer: 100 mm x 100 mm minimum. 10. Is it used for lab application or production? Answer: Lab 11. Description of the application. Answer: Chemical physics experiments. ====================================================================================== The question and answers opportunity is are now closed and no more questions will be answers. The RFQ closing date remains unchanged.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
1333ND21QNB680181- Combined Synopsis
- 3×Combined SynopsisCurrentApr 15, 2021
AUTOMATED PICOLITER LIQUID DISPENSER - A002
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Additional Details
Solicitation Number
1333ND21QNB680181
Archive Date
May 11, 2021
Office Address
GAITHERSBURG, MD, 20899