GovChime
Notice ID: 6950bf269e214770b1a7996d6e131920Combined Synopsis/Solicitation

Breakthrough Instrument

Archived on April 20, 2022. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
1:00 PM UTC−05:00
Posted
February 24, 2022
Notice type
Combined Synopsis/Solicitation
Set-aside
Small Business Set Aside - Total
Agency
Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY

Notice details

Office
DEPT OF COMMERCE NIST
Last updated
Sep 25, 2026

Identifiers

Solicitation number
1333ND22QNB640054
Notice ID
6950bf269e214770b1a7996d6e131920

Description

AMENDMENT 2 The purpose of this Amendment is two-fold: To Incorporate a revised Statement of Requirement (SOR) dated 2/24/22, which revises the delivery due date from 90 calendar days to 180 calendar days; and To extend the quotation due date to 1:00pm EST on March 4, 2022. All other terms and conditions remain unchanged. END OF AMENDMENT 2. _______________________________________________________________________________ AMENDMENT 1 The purpose of this Amendment is to provide responses to vendor clarification questions. Please see below: Question 1: For the PSA application, is a pressure range of atmospheric pressure to 500 psia suitable for this device? Is there a preferred pressure range? Response: Per the Statement of Requirement, the preferred pressure range is vacuum to 30 bars. Question 2: For the TSA application, what is the desired operating temperature range? Is it ambient to 200C or is it -20 to 60C ? Response: There is no specified requirement with respect to the operating temperature range for the TSA. Please propose as you see fit. Question 3: For the larger column testing (2 grams of material), what particle size of the material will be used? Response: We will be studying all kinds of materials from plain powder and pellets (particle size may range from nm to mm). The due date for quotes, along with all other terms and conditions remain unchanged. END OF AMENDMENT 1. ____________________________________________________________________ THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A SEPARATE WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES UNDER THE AUTHORITY OF FAR PARTS 12 AND 13. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) FAC 2022-03 effective January 1, 2022. The associated North American Industrial Classification System (NAICS) code for this procurement is 334516 - Analytical Laboratory Instrument Manufacturing with a small business size standard of 1000 Employees. This acquisition is being procured as a Total Small Business Set Aside. Quoters must possess an ACTIVE registration in the System for Award Management system, www.SAM.gov, when submitting a quotation and shall continue to be registered until time of award, during performance, and through final payment of any contract resulting from this solicitation. The Contracting Officer will confirm that quoters have an “active” registration at the www.sam.gov website upon receipt of the quotation. If the SAM.Gov registration is not active, the quotation will not be considered for award. The National Institute of Standards and Technology (NIST) Facility for Adsorbent Characterization and Testing (FACT Lab) was built with support from the Advanced Research Projects Agency–Energy (ARPA-E) of the U.S. Department of Energy. The FACT Lab aims to serve the sorbent materials research community as an impartial source for testing and characterization of sorbent materials, and by establishing reference materials and testing procedures. The FACT Lab seeks to contribute to the NIST air capture and carbon dioxide removal research effort by developing standard measurement procedures and reference data using reference materials. This enterprise will require new capabilities and leverage existing infrastructure. Toward developing new capabilities, the FACT Lab requires the acquisition of a breakthrough instrument, which allows for the evaluation of differential adsorption properties of a porous material under dynamic conditions. Breakthrough data are especially useful for evaluating and selecting industrial sorbents. The FACT Lab currently does not have this capability. The FACT lab needs the breakthrough instrument to be able to monitor the uptake of two or more gases with the capability to investigate the effects of water vapor, uptake of which often competes the adsorption of polar gases. The instrument shall be equipped with a high-vacuum pump, good temperature and pressure control, mass flow controllers, and a mass spectrometer. In addition to breakthrough curves, the instrument shall be able to perform pressure swing and temperature swing adsorption. The objective of this solicitation is to establish a Firm-Fixed-Price purchase order based on the specifications described in the attached Statement of Requirements (SOR). SPECIFIC REQUIREMENTS Responsible quoters shall provide a quotation for the following Contract Line Items (CLINs), in accordance with the specifications outlined in the attached Statement of Requirement. All equipment must be new. Used or remanufactured equipment will not be considered for award: BASE LINE ITEMS: Line Item 0001: (Quantity 1 Each) Entirety of breakthrough instrument, mass spectrometer detector, along with accessories (i.e., PC, vacuum pumps, temperature, and pressure controllers), inclusive of installation, training, and initial warranty, in accordance with the Statement of Requirements. OPTION LINE ITEMS: Line Item 0002: (Quantity 12 Months) Extended Warranty, in accordance with the Statement of Requirements. Line Item 0003: (Quantity 12 Months) Extended Warranty, in accordance with the Statement of Requirements. EVALUATION CRITERIA & BASIS FOR AWARD: The Government intends to award a purchase order resulting from this solicitation to the responsible Contractor whose quotation, conforming to the solicitation, provides the lowest priced, technically acceptable quote. Technically acceptable means that the quote: Meets or exceeds the minimum equipment specifications listed within the Statement of Requirements; Meets training, warranty, and installation requirements as applicable; and Meets the required delivery schedule. Price: The price evaluation will determine whether the quoted prices are fair and reasonable in relation to the solicitation requirements. Quoted prices must be entirely compatible with the technical quotation. INSTRUCTIONS: Completed Solicitation Provisions A completed version of all required solicitation provisions (see attached provisions/clauses document – required submissions highlighted in blue). Due Date for Quotations and Questions All quotations must be submitted, via e-mail, to Sadaf Afkhami, Contract Specialist, at Sadaf.Afkhami@nist.gov, with a carbon copy to Donald Graham, Contracting Officer, at Donald.Graham@nist.gov. Submissions must be received no later than 1:00 p.m. Eastern Time on February 7, 2022. FAX quotations will not be accepted. Quoters must reference the RFQ number in the subject line of the e-mail submission. Quotes shall not be deemed received by the Government until the quotation has entered the e-mail inbox of the individual(s) set forth above. Questions: All questions regarding this notice must be submitted via e-mail to Sadaf Afkhami, at Sadaf.Afkhami@nist.gov, with a carbon copy to Donald Graham, Contracting Officer, at Donald.Graham@nist.gov, no later than 1:00 p.m. Eastern Time on January 26, 2022. Quotation Preparation Instructions Each quotation shall consist of two (2) separate electronic files: (1) Technical Quotation and (2) Pricing Quotation. Technical Quotation: (1) Technical description and/or product literature. Quoters shall include the manufacturer, make and model of the product, manufacturer sales literature or other product literature which CLEARLY DOCUMENTS that the offered products meet or exceed all specifications outlined in the statement of requirements. It is the responsibility of the quoter to ensure that submitted documentation clearly addresses all specifications and requirements. (2) If product literature does not address any given specification, the Contractor shall provide a discussion of how the Contractor will meet or exceed that required specification. Any quoted modification must be discussed. It is the responsibility of the quoter to ensure that the discussion clearly addresses the modification and how the required specification(s) will be met with the quoted modification. (3) The quoted delivery timeline for the base line item. (4) A description of the quoted training. (5) A description of the quoted warranty. Price Quotation: (1) All Quoters shall submit a firm fixed price, FOB Destination, price quotation for the base and option line items. The quotation must include a unit price and total amount for each line item and the aggregate price for all base and option line items. (2) The price quotation shall include a cover page with the following information: The solicitation number 1333ND22QNB640054; The name and address, of the Quoter; The name, phone number, and email address of the Quoter’s point of contact; DUNS # for Quoter’s active SAM.Gov registration. Any applicable discount terms. A statement that the Contractor agrees to all terms, conditions, and provisions included in the solicitation. If the Contractor objects to any of the terms and conditions contained in this solicitation, the Contractor shall state “The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:” [Contractor shall list exception(s) and rationale for the exception(s)]. It is the sole responsibility of the Contractor to identify in their quote any exceptions to the terms and conditions of the solicitation. A statement that the quotation is valid for a minimum of 60 days from the response deadline of this solicitation. Please note that this procurement IS NOT being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If a contractor submits a quotation based upon an FSS or GWAC contract, the Government will accept the quoted price. However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the contractor’s FSS or GWAC contract. PROVISIONS AND CLAUSES: The provisions and clauses applicable to this solicitation are identified in Attachment 2 titled “Applicable Clauses & Provisions”. The full text of a Federal Acquisition Regulation (FAR) provision or clause may be accessed electronically at www.acquisition.gov/far. The full text of a Department of Commerce Acquisition Regulation (CAR) provision or clause may be accessed electronically at or http://www.osec.doc.gov/oam/acquistion_management/policy/. ATTACHMENTS: The following attachments apply to this solicitation: 1. Statement of Requirements 2. Applicable Clauses & Provisions

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

No documents available.

Lifecycle

Solicitation:1333ND22QNB640054
  1. Combined Synopsis
  1. 3×
    Combined SynopsisCurrentJan 21, 2022

    Breakthrough Instrument

    Notice 6950bf269e214770b1a7996d6e131920 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
This is a Notice of Intent, not a request for proposal. The National Institute of Health, Clinical Center (NIH-CC) intends to negotiate on an other than full and open competition basis with the following vendor: Illumina, Inc. Acquisition Description: The purpose of this acquisition is to purchase two Illumina MiSeq i100 series instruments. These instruments will be used by the NIH HLA Laboratory to produce high resolution HLA typing results for the numerous transplant protocols supported by the laboratory. It will replace the current Illumina MiSeq instruments in the lab that were purchased in 2021 and 2022. The vendor will discontinue service on the current model of the MiSeq. New instruments are required to ensure time to validate these replacements before discontinuation of service. The total dollar value for this order is $139,100.52. The MiSeq is an integrated instrument that performs clonal amplification, genomic DNA sequencing, and data analysis with base calling, alignment, variant calling, and reporting in a single run. The MiSeq provides the Lab with the highest HLA typing results possible. The transplant protocols served by the HLA Lab require highest resolution possible to increase the chance of a successful transplant. The HLA Lab currently owns two MiSeq instruments, so the procedures and Quality Control assessments are in place. The order aims to replace the Illumina Miseq – s/n M07700 (property ID is 02223449) and s/n M08636 (property ID is 02268689) that were purchased in 2019 and 2022. Replacement is necessary to ensure proper performance of these instruments prior to discontinuation of service for the current model of the Illumina MiSeq instruments by the vendor. The statutory authority for this sole source requirement is 41 U.S.C. 253(c) (1) as implemented by FAR 6.302-1 only one responsible source and no other supply of service will satisfy agency requirements. THIS IS NOT A REQUEST FOR PROPOSAL. All responsible sources that could provide the required may submit a capability statement that will be considered by email (subject line to reference NOI-OLAO-CC-27-000836) by 12:00 PM eastern standard time on 11/27/2026 to: valerie.gregorio@nih.gov. All responses received by the closing date of this synopsis will be considered by the Government. A determination not to compete this requirement, based upon responses to this notice, is solely within the discretion of the Government.
74%
Pre-Solicitation11/27/2026
Brand Name or Equal Teledyne Instruments Liquid Syringe Pump - Model 260x Pump Module (P/N: 681240830) - 2 Qty. per attached specifications along with the following items: 1. Continuous flow dual electric valve package (1/8 inch valves) for Syrixus 1000x, 500x and 260x (P/N: 601267015) - 1 Qty. 2. Electric Valve Controller for SyriXus pumps (P/N: 681240854) - 1 Qty. Amendment 0001: The purpose of this amendment is to provide question and answer as attached as of 11/10/2026. All other terms and conditions remain unchanged.
74%
Solicitation11/20/2026
The Naval Surface Warfare Center Philadelphia Division intends to procure FM-6 ferrogram maker instrument on a sole source to Trico. The proposed contract action is for supplies for which the Government intends to solicit and award to only one source under the authority of FAR 6.302. any questions should be e-mailed to : Joseph.w.aprile2.civ@us.navy.mil Phone Calls will NOT be accepted.
73%
Special Notice11/09/2026
Sources Sought Notice for Graphite Furnace Atomic Absorption Spectrometer Notice ID: NIST-MML-FY27-SS01 Response Date: 11/28/2026 Product Service Code (PSC): 6640 NAICS Code: 334516 Background The Inorganic Chemical Metrology Group (ICMG) uses at least two measurement methods, each based on orthogonal physical principles, to certify the trace elements in candidate standard reference materials (SRM). These SRMs are intended for method validation and quality assurance in trace-element measurements to assess the nutritional value and contaminant status of agricultural products. A sensitive trace-element detector, a graphite furnace atomic absorption spectrometer (GFAAS) is sought to complement the group's inductively coupled plasma mass spectrometric (ICP-MS) measurement capability and fulfill the two independent method requirements for SRM development. Consideration will be given to GFAAS capable of direct solid-sample analysis to maximize its orthogonality relative to the liquid-sampling-based ICP-MS technique. Minimum Capabilities that NIST Requires and for Which Information is Being Requested The National Institute for Standards and Technology (NIST) located in Gaithersburg, MD is seeking information on vendors that are capable of providing a graphite furnace atomic absorption spectrometer (1) capable of measuring liquid test samples with an instrument detection limit (DL) for Cu at 0.02 µg/L or better (324.8 nm line, 50 µL sample volume, DL=3 x standard deviation of 10 replications) and (2) designed for direct introduction of solid state test samples into the graphite furnace for analyte quantification without a need of sample digestion Instructions for Responding to This Notice Parties that respond to this Notice are requested to submit the requested information via email in Microsoft Word, Adobe PDF, and/or Microsoft Excel format to the designated point(s) of contact whose name and email address appears at the bottom of this notice. Please provide only the information requested by this Notice, and do not include proprietary, classified, confidential, or sensitive information in a response to this Notice. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Information Requested in Response to This Notice: To help NIST with its market research, NIST is requesting that industry sources carefully review this notice and any attachments to it and voluntarily provide the following information: Company Summary Notice Identification: Notice ID and Title of this posting. Corporate Details: Company name, physical address, website address, and Unique Entity Identifier (UEI). Point of Contact (POC): Name, phone number, and email address. Company Size Standard: Your company’s size status relative to the NAICS code provided in this Notice. (Refer to the SBA Table of Small Business Size Standards). System for Award Management (SAM) Registration: Indicate whether your company has an active registration for procurement purposes in SAM.gov. Review the information included with this Notice, indicate whether there is anything that may inadvertently exclude domestically manufactured (made in the U.S.A.) end products from being considered; and indicate if anything included with this Notice could potentially be revised to improve the ability for domestic (“Made in America”) end products to be considered; and if a domestic end product is not currently available to meet the draft requirements/minimum specifications, please provide an estimated timeframe for when it may be domestically produced in the USA in the future if that appears to be likely. Information Regarding Commercial Products and Related Commercial Services Provide specifications, company name of the original equipment manufacturer, and the country of manufacture for commercial products and/or commercial services that your company is legally authorized to sell and that may meet NIST’s minimum requirements. Standard Commercial Pricing: Provide your company’s standard commercial pricing information for the requirements described in this Notice (including any Attachments) and explain what is included in those standard commercial prices. Estimated Price Range: You may provide an estimated price or estimated price range for the draft requirements included in this notice, including a brief explanation of how it was derived. Standard Commercial Terms and Conditions: Provide a copy of the standard commercial terms and conditions for the commercial products and/or commercial services identified in your company’s response to this Notice, including the nature and the duration of applicable standard commercial warranty(ies). Regulatory and Supply Chain Compliance Indicate whether your company could comply with RFO FAR clause 52.219-14 (Deviation JAN 2026) if this acquisition were to be set aside for small businesses (assuming that there is no waiver to the Nonmanufacturer Rule for the applicable NAICS code). Provide a brief supporting explanation. Existing Governmentwide Contract Vehicles Indicate whether your company has its own GSA Multiple Award Schedule (MAS) contract or other federal contract vehicle(s) under which NIST could award an order and, if so, provide the details of the contract(s) (contract number, Contracting Officer name/contact, SOW, terms and conditions, and price lists). Important Notes This Notice does not obligate the Government to award a contract or otherwise pay respondents to this notice for information provided in response to this Notice. Following a review of the responses and market research, NIST may publish a solicitation on an authorized site, depending on the chosen acquisition strategy. Responses received after the closing date for this Notice may not be considered. There is no solicitation available at this time. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted.
70%
Market Research11/28/2026
70%
Market Research12/05/2026

Additional Details

Solicitation Number

1333ND22QNB640054

Archive Date

Apr 20, 2022

Office Address

GAITHERSBURG, MD, 20899