GovChime

Purchase of an Ion Beam Etch and Ion Beam Deposition System

Overview

Response deadline
12:00 PM UTC−04:00
Posted
July 27, 2023
Notice type
Combined Synopsis/Solicitation
Agency
Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY

Notice details

Office
DEPT OF COMMERCE NIST
Place of performance
Boulder, 80305
Last updated
Sep 25, 2026

Identifiers

Solicitation number
1333ND23QNB680459
Notice ID
a5851cdfd830496da6a082ac361ef3c7

Description

Please see Attachments for full details.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

Solicitation:1333ND23QNB680459
  1. Combined Synopsis
  1. Combined SynopsisCurrentJul 27, 2023

    Purchase of an Ion Beam Etch and Ion Beam Deposition System

    Notice a5851cdfd830496da6a082ac361ef3c7 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
THIS IS A NOTICE OF INTENT TO SOLE SOURCE, NOT A REQUEST FOR A QUOTE (RFQ). A RFQ WILL NOT BE ISSUED AND QUOTES WILL NOT BE REQUESTED. In accordance with FAR 6.103.1, the Naval Air Warfare Center, Weapons Division, China Lake, intends to award a firm fixed price contract on a sole source basis for: To: Forge Nano Inc. at 12300 Grant st. #110 Thornton, Colorado as the only manufacturer of fluidization ALD systems, which rely on their exclusive, proprietary software. Because the technology and software licenses are strictly proprietary, no other vendor can provide or support this equipment. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE QUOTES; no solicitation or RFQ will be forthcoming. However, interested parties may identify their interest and capability to respond to this requirement no later than 4:00pm PST 11/2/26. The written response shall reference solicitation number N6893626SIMACQD550000E5500000441 and must provide a clear and concise capability statement to show the ability to perform the required work without compromising the quality, accuracy, reliability and schedule. Written responses to this notice shall be submitted to email: Amy Lamberth amy.s.lamberth.civ@us.navy.mil All vendors must be registered at https://sam.gov/ prior to submitting quotes. It is recommended that all interested parties be aware that processing this additional information may take at least 10-15 days and are proactive in maintaining the SAM registrations in an 'Active' status as the government cannot award an entity without an 'Active' SAM registration. Contractors must be certified through Defense Logistics Information Services (DLIS) in order to access Controlled Unclassified Information (CUI) or Export Controlled Information. Access to CUI is limited, to a single point of contact (POC) per CAGE code, who is listed as the Data Custodian on the DD 2345 and approved by Defense Logistics Agency (DLA). The DD 2345 must be approved prior to requesting access to CUI in SAM.gov. Contractors are responsible for coordinating with their CAGE code’s Data Custodian POC to request access to CUI. For additional information, visit the DLA website for the Joint Certification Program: https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/.
72%
Pre-Solicitation11/02/2026
Brookhaven Science Associates, LLC (herein known as “BSA”), operator of Brookhaven National Laboratory (BNL) under a Prime Contract (DE-SC0012704) with the U.S. Department of Energy (DOE), herewith solicits your quote for an Ultra-High Vacuum Suitcase. Please see attached Combined Synopsis/Solicitation 485362 and its enclosures for details.
51%
Combined Synopsis11/20/2026
This flash sinter-forging technology from Los Alamos National Laboratory enables manufacturers to produce dense, net- or near-net-shape ceramic components in minutes rather than hours or days, while cutting energy consumption by up to 90% and significantly reducing production costs. By simultaneously applying electric current, heat, and mechanical pressure, the process consolidates shaping, densification, and finishing into a single, compact operation, eliminating much of the costly machining typically required for hard, brittle ceramics. The result is faster throughput, lower capital and operating expenses, smaller equipment footprints, and improved sustainability—while also enabling superior microstructural control and access to advanced or difficult-to-sinter materials. How it Works: The technology works by placing ceramic powder into a specially designed die and then applying three inputs at once: an electric field and current, moderate external heating, and mechanical pressure. As electricity passes directly through the ceramic, it rapidly heats the material from the inside, dramatically accelerating the bonding of particles while keeping overall furnace temperatures lower than conventional methods. At the same time, controlled pressure compresses and shapes the material as it densifies, allowing the part to reach high density while already close to its final geometry. Sensors and software coordinate the electrical, thermal, and mechanical conditions in real time, enabling precise control of the process and material behavior. By integrating electrical activation and forging into a single, tightly controlled step, the system achieves fast densification and shaping that would otherwise require multiple, time-intensive processing stages. Key Advantages: Minutes-long processing: Produces dense ceramic parts far faster than conventional sintering methods. Up to ~90% energy reduction: Direct electrical heating dramatically lowers energy use and operating costs. Near-net shaping: Forms parts during densification, greatly reducing or eliminating costly post-machining. Lower total manufacturing cost: Combines forming, sintering, and finishing into a single streamlined step. Advanced material capability: Enables difficult-to-sinter and next-generation ceramics with controlled microstructures. Compact and scalable: Smaller footprint and lower power requirements support deployment from R&D to industrial production. Market Applications: Semiconductor manufacturing (high-purity ceramic components, fixtures, insulators, wear parts) Aerospace and defense (high-temperature components, protective structures, lightweight ceramic parts) Energy and nuclear (fuel cells, solid-state batteries, nuclear and high-temperature energy ceramics) Medical and dental (implants, prosthetics, precision ceramic components) Industrial and manufacturing (wear-resistant parts, tooling components, structural ceramics) Additive and advanced manufacturing (post-processing of 3D-printed ceramic parts, rapid densification of complex shapes) Development Status: TRL 3 US Patent No. 12,465,971 LA-UR-26-23345 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
51%
Special Notice05/11/2026
FBO ANNOUNCEMENT: PRESOLICITATION NOTICE, NOTICE OF INTENT ACTION CODE: Presolicitation Notice SUBJECT: Sole source – Replacement Cesium Source Head for a Secondary Ion Mass Spectrometry Instrument RESPONSE DATE: 11/07/26 DESCRIPTION: The National Institute of Standards and Technology (NIST) relies on a time-of-flight secondary ion mass spectrometry (ToF-SIMS) instrument. Currently, the Cesium Source Head is non-functional and requires urgent replacement to restore operation. The National Institute of Standards and Technology (NIST) intends to negotiate on a sole source basis, under the authority of FAR Part 12.102(b) with ION-TOF USA, Inc located in Chestnut Ridge, New York, for this replacement equipment. Sole Source justification is based on the following: Market research has shown that ION-TOF is the sole source for replacement equipment for this NIST owned Secondary Ion Mass Spectrometry Instrument instrument. ION-TOF has stated in writing stated that: “ION-TOF USA, Inc. is the only company authorized and capable of offering service and spare parts for the IONTOF range of surface analysis equipment including the TOF-SIMS IV instruments.” NAICS code for this requirement will be 334516– Analytical Laboratory Instrument Manufacturing with a small business size of 1000 employees. No solicitation package will be issued. This notice of intent is not a request for competitive quotations; however, interested parties who regard themselves as capable of fulfilling these requirements are invited to submit responses to the Government for consideration. Responses received by 1:00AM EST on 11/07/26 will be considered by the Government. A determination by the Government not to compete the proposed acquisition based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Inquiry POCs Erik.Fycklund@nist.gov Primary Donald.Graham@nist.gov Secondary National Institutes of Standards and Technologies NIST Acquisition Management Division (AMD) 100 Bureau Dr. Mail Stop 1640 Gaithersburg, MD. 20899-1640
45%
Pre-Solicitation11/07/2026
43%
Market Research11/20/2026

Additional Details

Solicitation Number

1333ND23QNB680459

Archive Date

Aug 25, 2023

Office Address

GAITHERSBURG, MD, 20899