GovChime
Notice ID: 2662ec92cdab43aaafbe09f86cca2cc8Combined Synopsis/Solicitation

ULTRASONIC ATOMIZER FOR PRODUCING METAL POWDER

Archived on August 24, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
1:00 PM UTC−04:00
Posted
August 3, 2024
Notice type
Combined Synopsis/Solicitation
NAICS
332117: Powder Metallurgy Part Manufacturing
Agency
Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY

Notice details

Office
DEPT OF COMMERCE NIST
Place of performance
20899
Last updated
Sep 25, 2026

Identifiers

Solicitation number
1333ND24QNB640397
Notice ID
2662ec92cdab43aaafbe09f86cca2cc8

Description

________________________________________________________________________________________________________ **Amendment 0001** - The purpose of this amendment is three-fold: 1. Post the responses to questions received as a result of this solicitation. 2. Post a revised SOR, as a result of the Q&A. 3. Extend the RFQ close date from August 7, 2024, to August 9, 2024, as a result of the Q&A. All other terms and conditions remain unchanged and in effect. ________________________________________________________________________________________________________ THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A SEPARATE WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES UNDER THE AUTHORITY OF FAR PARTS 12 AND 13. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) FAC 2024-05, effective May 22, 2024. The associated North American Industrial Classification System (NAICS) code for this procurement is 332117 - Powder Metallurgy Part Manufacturing with a small business size standard of 550 Employees. This acquisition is being procured as a Full and Open competition. Quoters must possess an ACTIVE registration in the System for Award Management system, www.SAM.gov, when submitting a quotation and shall continue to be registered until the time of award, during performance, and through final payment of any contract resulting from this solicitation. The Contracting Officer will confirm that quoters have an “active” registration at the www.sam.gov website upon receipt of the quotation. If the SAM.Gov registration is inactive, the quotation will not be considered for award. The objective of this solicitation is to establish a Firm-Fixed-Price purchase order for one (1) ultrasonic atomizer based on the specifications described in the attached Statement of Requirements (SOR). DELIVERY TERMS Delivery terms shall be FOB Destination. The Contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery. EVALUATION CRITERIA: The Government intends to award a single purchase order resulting from this solicitation to the responsible Contractor whose quotation, conforming to the solicitation, will provide the best value to the Government, price, and other factors considered. In addition to price, the following factors shall be used to evaluate quotations: 1. Technical Approach 2. Prior Experience 3. Past Performance. In determining best value, Technical Approach, Prior Experience and Past Performance are listed in descending order of importance. When combined, the non-price factors shall be more important than price. 1. Technical Approach: NIST will evaluate the extent to which the Contractor’s quote demonstrates their ability to satisfy the requirements in the Statement of Requirement. 2. Prior Experience: NIST will evaluate the extent of the Contractor’s prior experience in providing ultrasonic atomizers. 3. Past Performance: Evaluation of past performance shall be based on the references provided and/or the Contractor’s recent and relevant procurement history with NIST or its affiliates. Past Performance will be evaluated to determine the overall quality of the product and service provided by the Contractor. The Government will evaluate past performance based on Past Performance Surveys and by contacting appropriate references, including NIST references, if applicable. The Government reserves the right to consider information available from other sources. In the case of a Contractor without a record of relevant past performance or for whom information on past performance is not available, the Contractor will be evaluated neither favorably nor unfavorably. PRICE The quoted price will be evaluated to determine whether the prices are fair and reasonable in relation to the solicitation requirements. Prices must be entirely compatible with the technical portion of the quotation. The Government will evaluate quotations for award, inclusive of the prices quoted for all optional line items. The Government may determine that a quotation is unacceptable if the option prices are significantly unbalanced. Evaluation of options does not obligate the Government to exercise the options. NIST intends to evaluate quotes and issue a contract based on the initial quotes received. Therefore, the Contractor’s initial quote should contain the Contractor’s best terms from a price and technical standpoint. NIST reserves the right to request revised quotes from or negotiate final contract terms with one or more, but not all, Contractors if later determined by the Contracting Officer to be necessary. Please note that this procurement IS NOT being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If a contractor submits a quotation based upon an FSS or GWAC contract, the Government will accept the quoted price. However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the contractor’s FSS or GWAC contract, and the statement required above shall be included in the quotation; CONTRACTOR INSTRUCTIONS FOR SUBMISSION OF QUOTATIONS: Quotations shall include the following required submissions: 1. Technical Approach. The Contractor shall provide detailed information demonstrating their understanding of each specification in the statement of requirements (SOR). 2. Prior Experience. The Contractor shall provide detailed information on their organization’s experience working with the original equipment manufacturer (OEM) within the past five years. The Contractor shall explain their role or function in working with the OEM on delivery and installation agreements as well as any significant responsibilities held. 3. Past Performance. The Contractor shall provide past performance information regarding up to five relevant contracts for the past three years with federal, state, or local governments and international and commercial customers. The information shall describe contracts of a similar type and scope as the current requirement. If the contractor intends to use another firm for a substantial portion of this requirement (i.e., >20% of the total effort), that firm’s past performance information must also be provided. If the Contractor has no relevant past performance, a statement must be included to that effect. The description of each contract described in this section shall provide the following information, as applicable: • Contract Number • Description of work performed and relevance to solicitation requirements • Period of Performance • Point of Contact Information (name, email, phone number) for the client reference 5. Price Contractors shall provide a firm fixed price for Line Items 0001 through 0004. All equipment must be new. Used or remanufactured equipment will not be considered for award.: BASELINE ITEMS: Line Item 0001: (Quantity 1 Each) Ultrasonic Atomizer, inclusive of delivery, installation, training, and a 1-year warranty, in accordance with the Statement of Requirements. OPTIONAL LINE ITEMS: Line Item 0002: Additional Vacuum Mechanical Gripper in accordance with the Statement of Requirements. Line Item 0003: Upgraded vacuum system in accordance with the Statement of Requirements. Line Item 0004: Continuous Wire feeder in accordance with the Statement of Requirements. 6. Terms and Conditions Any award resulting from this solicitation will contain the following statement: “The Government’s terms and conditions, identified herein, shall be the prevailing terms and conditions governing this award. In the event of a conflict between the Government’s and contractor’s terms and conditions, the Government’s terms and conditions take precedence.” If the Contractor objects to any of the terms and conditions contained in this solicitation, the Contractor shall state, “The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:” [Contractor shall list exception(s) and rationale for the exception(s)]. It is the Contractor's sole responsibility to identify in their quote any exceptions to the terms and conditions of the solicitation. If the contractor does not include such a statement, the submission of a quotation in response to this solicitation will be regarded as the Contractor’s acceptance of the Government’s terms and conditions for inclusion into the resultant purchase order as prevailing. 7. Required Provisions A completed version of all required solicitation provisions (see attached provisions/clauses document). 8. Contractor Identifying Information The Government Unique Identifier number for the Contractor’s active System for Award Management (SAM) registration. 9. Socioeconomic Status Representation If the Contractor’s representations and certifications in SAM.gov do not reflect the NAICS code governing this solicitation, the Contractor must submit documentation that they are a small business under the NAICS code governing this solicitation. DUE DATE FOR QUOTATIONS All quotations must be submitted via e-mail to Rudolph Spencer, Contract Specialist, at rudolph.spencer@nist.gov with a carbon copy to Donald Graham, Contracting Officer, at donald.graham@nist.gov. Submissions must be received no later than 1:00 p.m. Eastern Time on August 9, 2024. FAX quotations will not be accepted. Quoters must reference the RFQ number in the subject line of the e-mail submission. Quotes shall not be deemed received by the Government until the quotation has entered the e-mail inbox of the individual(s) set forth above. Questions: All questions regarding this notice must be submitted via e-mail to rudolph.spencer@nist.gov with a carbon copy to Donald Graham, Contracting Officer, at donald.graham@nist.gov, no later than 1:00 p.m. Eastern Time on July 31, 2024. PROVISIONS AND CLAUSES The provisions and clauses applicable to this solicitation can be found under Applicable Provisions and Clauses. The full text of a FAR provision or clause may be accessed electronically at www.acquisition.gov/far. ATTACHMENTS: The following attachments apply to this solicitation: 1. The Statement of Requirements 2. Applicable Provisions and Clauses

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

No documents available.

Lifecycle

Solicitation:1333ND24QNB640397
  1. Combined Synopsis
  1. 2×
    Combined SynopsisCurrentJul 24, 2024

    ULTRASONIC ATOMIZER FOR PRODUCING METAL POWDER

    Notice 2662ec92cdab43aaafbe09f86cca2cc8 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
-Market Research11/20/2026
Sources Sought Notice for Graphite Furnace Atomic Absorption Spectrometer Notice ID: NIST-MML-FY27-SS01 Response Date: 11/28/2026 Product Service Code (PSC): 6640 NAICS Code: 334516 Background The Inorganic Chemical Metrology Group (ICMG) uses at least two measurement methods, each based on orthogonal physical principles, to certify the trace elements in candidate standard reference materials (SRM). These SRMs are intended for method validation and quality assurance in trace-element measurements to assess the nutritional value and contaminant status of agricultural products. A sensitive trace-element detector, a graphite furnace atomic absorption spectrometer (GFAAS) is sought to complement the group's inductively coupled plasma mass spectrometric (ICP-MS) measurement capability and fulfill the two independent method requirements for SRM development. Consideration will be given to GFAAS capable of direct solid-sample analysis to maximize its orthogonality relative to the liquid-sampling-based ICP-MS technique. Minimum Capabilities that NIST Requires and for Which Information is Being Requested The National Institute for Standards and Technology (NIST) located in Gaithersburg, MD is seeking information on vendors that are capable of providing a graphite furnace atomic absorption spectrometer (1) capable of measuring liquid test samples with an instrument detection limit (DL) for Cu at 0.02 µg/L or better (324.8 nm line, 50 µL sample volume, DL=3 x standard deviation of 10 replications) and (2) designed for direct introduction of solid state test samples into the graphite furnace for analyte quantification without a need of sample digestion Instructions for Responding to This Notice Parties that respond to this Notice are requested to submit the requested information via email in Microsoft Word, Adobe PDF, and/or Microsoft Excel format to the designated point(s) of contact whose name and email address appears at the bottom of this notice. Please provide only the information requested by this Notice, and do not include proprietary, classified, confidential, or sensitive information in a response to this Notice. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Information Requested in Response to This Notice: To help NIST with its market research, NIST is requesting that industry sources carefully review this notice and any attachments to it and voluntarily provide the following information: Company Summary Notice Identification: Notice ID and Title of this posting. Corporate Details: Company name, physical address, website address, and Unique Entity Identifier (UEI). Point of Contact (POC): Name, phone number, and email address. Company Size Standard: Your company’s size status relative to the NAICS code provided in this Notice. (Refer to the SBA Table of Small Business Size Standards). System for Award Management (SAM) Registration: Indicate whether your company has an active registration for procurement purposes in SAM.gov. Review the information included with this Notice, indicate whether there is anything that may inadvertently exclude domestically manufactured (made in the U.S.A.) end products from being considered; and indicate if anything included with this Notice could potentially be revised to improve the ability for domestic (“Made in America”) end products to be considered; and if a domestic end product is not currently available to meet the draft requirements/minimum specifications, please provide an estimated timeframe for when it may be domestically produced in the USA in the future if that appears to be likely. Information Regarding Commercial Products and Related Commercial Services Provide specifications, company name of the original equipment manufacturer, and the country of manufacture for commercial products and/or commercial services that your company is legally authorized to sell and that may meet NIST’s minimum requirements. Standard Commercial Pricing: Provide your company’s standard commercial pricing information for the requirements described in this Notice (including any Attachments) and explain what is included in those standard commercial prices. Estimated Price Range: You may provide an estimated price or estimated price range for the draft requirements included in this notice, including a brief explanation of how it was derived. Standard Commercial Terms and Conditions: Provide a copy of the standard commercial terms and conditions for the commercial products and/or commercial services identified in your company’s response to this Notice, including the nature and the duration of applicable standard commercial warranty(ies). Regulatory and Supply Chain Compliance Indicate whether your company could comply with RFO FAR clause 52.219-14 (Deviation JAN 2026) if this acquisition were to be set aside for small businesses (assuming that there is no waiver to the Nonmanufacturer Rule for the applicable NAICS code). Provide a brief supporting explanation. Existing Governmentwide Contract Vehicles Indicate whether your company has its own GSA Multiple Award Schedule (MAS) contract or other federal contract vehicle(s) under which NIST could award an order and, if so, provide the details of the contract(s) (contract number, Contracting Officer name/contact, SOW, terms and conditions, and price lists). Important Notes This Notice does not obligate the Government to award a contract or otherwise pay respondents to this notice for information provided in response to this Notice. Following a review of the responses and market research, NIST may publish a solicitation on an authorized site, depending on the chosen acquisition strategy. Responses received after the closing date for this Notice may not be considered. There is no solicitation available at this time. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted.
-Market Research11/28/2026
-Market Research12/05/2026
-Market Research12/03/2026
FBO ANNOUNCEMENT: PRESOLICITATION NOTICE, NOTICE OF INTENT ACTION CODE: Presolicitation Notice SUBJECT: Sole source – Replacement Cesium Source Head for a Secondary Ion Mass Spectrometry Instrument RESPONSE DATE: 11/07/26 DESCRIPTION: The National Institute of Standards and Technology (NIST) relies on a time-of-flight secondary ion mass spectrometry (ToF-SIMS) instrument. Currently, the Cesium Source Head is non-functional and requires urgent replacement to restore operation. The National Institute of Standards and Technology (NIST) intends to negotiate on a sole source basis, under the authority of FAR Part 12.102(b) with ION-TOF USA, Inc located in Chestnut Ridge, New York, for this replacement equipment. Sole Source justification is based on the following: Market research has shown that ION-TOF is the sole source for replacement equipment for this NIST owned Secondary Ion Mass Spectrometry Instrument instrument. ION-TOF has stated in writing stated that: “ION-TOF USA, Inc. is the only company authorized and capable of offering service and spare parts for the IONTOF range of surface analysis equipment including the TOF-SIMS IV instruments.” NAICS code for this requirement will be 334516– Analytical Laboratory Instrument Manufacturing with a small business size of 1000 employees. No solicitation package will be issued. This notice of intent is not a request for competitive quotations; however, interested parties who regard themselves as capable of fulfilling these requirements are invited to submit responses to the Government for consideration. Responses received by 1:00AM EST on 11/07/26 will be considered by the Government. A determination by the Government not to compete the proposed acquisition based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Inquiry POCs Erik.Fycklund@nist.gov Primary Donald.Graham@nist.gov Secondary National Institutes of Standards and Technologies NIST Acquisition Management Division (AMD) 100 Bureau Dr. Mail Stop 1640 Gaithersburg, MD. 20899-1640
-Pre-Solicitation11/07/2026

Additional Details

Solicitation Number

1333ND24QNB640397

Archive Date

Aug 24, 2024

Office Address

GAITHERSBURG, MD, 20899