Notice ID: 3347b1a7d93243b387dedafbbf4aab2cCombined Synopsis/SolicitationArchived
Rapid Cell Imager
Archived on September 13, 2025. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 PM EDT
- Posted
- August 15, 2025
- Notice type
- Combined Synopsis/Solicitation
- NAICS
- 334516: Analytical Laboratory Instrument Manufacturing
- Agency
- Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
Notice details
- Office
- DEPT OF COMMERCE NIST
- Place of performance
- Gaithersburg, 20899
- Last updated
- Nov 9, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- 1333ND25QNB640439
- Notice ID
- 3347b1a7d93243b387dedafbbf4aab2c
Description
TITLE: Rapid Cell Imager DESCRIPTION THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A SEPARATE WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES UNDER THE AUTHORITY OF FAR PARTS 12 AND 13 This solicitation is a Request for Quotations (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-05 effective 8/7/25 The associated North American Industrial Classification System (NAICS) code for this procurement is 334516 with a small business size standard of 1,000 employees. Quoters must possess an ACTIVE registration in the System for Award Management system, www.SAM.gov, when submitting a quotation and shall continue to be registered until time of award, during performance, and through final payment of any contract resulting from this solicitation. The Contracting Officer will confirm that quoters have an active registration at the www.sam.gov website upon receipt of the quotation. If the SAM.Gov registration is not active, the quotation will not be considered for award. This is a Brand Name Only requirement. Quoters must provide the brand name identified within the Statement of Requirement (SOR). The brand name only justification is as follows: Biosystems and Biomaterials Division (BBD) of the Material Measurement Laboratory develops reference materials and performs measurement services in biological systems including living cell cultures. BBD requires new capabilities for measurement services work with living cell cultures to make rapid, high-throughput, image-based measurements of cell-cultures in multiple formats with minimal manual manipulation or intervention during measurement. BBD has identifed that the requirement can only be met by the Celigo Imaging Cytometer manufactured by Revvity Health Sciences, Inc. The requirement can be described in the following critical criteria: 1. Modes of operation that include bright-field imaging and multi-channel fluorescence imaging to enable label free, fluorescent marker, and stain/dye based measurements and bioassays. 2. Physical optics that enable the following, without dependence on software-based image post-processing to provide raw images for use with custom, NIST-developed machine learning image analysis routines for cellular analysis: a. rapid imaging of entire multi-well plates (whole well, whole 96 well-plate imaging within 10 min and at resolution of at least 1 pixel/ m) b. meniscus or well edge imaging 3. Compatibility with formats of laboratory plastic ware that are currently being used by BBD for cell culture including 6- to 96-well multi-well plates, 25 cm2 T-flasks, 75 cm2 T-flasks and 100 mm diameter petri dishes. 4. Compatibility with Hamilton STAR automation platforms already in use in BBD. These platforms are existing capital investment robotic systems for automated cell culture with which the new imaging instrument needs to be interfaced for use in autonomous cell culture development. BBDs market research demonstrates the Celigo Imaging Cytometer uniquely meets these four critical criteria. SPECIFIC REQUIREMENTS Responsible quoters shall provide a quotation for the following Contract Line Items (CLINs), in accordance with the specifications outlined in the attached Statement of Requirement. All equipment must be new. Used or remanufactured equipment will not be considered for award: BASE LINE ITEMS: LINE ITEM 0001: (Quantity 1) Celigo Imaging Cytometer inclusive of delivery, installation, training, and 1-year initial warranty, in accordance with the Statement of Requirements. OPTION LINE ITEMS: These line items will not be exercised at the time of award. They will be exercised in one-year increments at the Governments discretion: LINE ITEM 0002: (Quantity 1 YR) Extended Warranty- Option Year 1 in accordance with the Statement of Requirements. LINE ITEM 0003: (Quantity 1 YR) Extended Warranty- Option Year 2 in accordance with the Statement of Requirements. DELIVERY TERMS Delivery terms shall be FOB Destination. FOB DESTINATION MEANS: The Contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery. EVALUATION CRITERIA AND BASIS FOR AWARD The Government intends to award a purchase order resulting from this solicitation to the responsible Contractor whose quotation, conforming to the solicitation, provides the lowest priced, technically acceptable quote. Technically acceptable means that the quote: 1.) Meets or exceeds the brand name only minimum equipment specifications listed within the Statement of Requirements; 2.) Meets training, warranty, and installation requirements as applicable; 3.) Meets the required delivery schedule; and 4.) Meets Option Years for Extended Warranty. Price: The price evaluation will determine whether the quoted prices are fair and reasonable in relation to the solicitation requirements. Quoted prices must be entirely compatible with the technical quotation. NIST intends to evaluate quotations and issue a purchase order based on the initial quotes received. Therefore, the offerors initial quote should contain the offerors best terms from a price and technical standpoint. The Contracting Officer anticipates awarding this requirement without discussions but reserves the right to enter discussions if it is deemed necessary. INSTRUCTIONS: Due Date for Quotations and Questions All quotations must be submitted, via e-mail, to Don Graham, Contract Specialist, at donald.graham@nist.gov. Submissions must be received no later than 12:00 p.m. Eastern Time on August 29, 2025 FAX quotations will not be accepted. Quoters must reference the RFQ number in the subject line of the e-mail submission. Quotes shall not be deemed received by the Government until the quotation has entered the e-mail inbox of the individual(s) set forth above. Questions: All questions regarding this notice must be submitted via e-mail to Don Graham, at donald.graham@nist.gov, no later than 12:00 p.m. Eastern Time on August 22, 2025. Quotation Preparation Instructions Each quotation shall consist of three (3) separate electronic files: (1) Technical Quotation (2) Pricing Quotation (3) Completed copy of the Provisions and Clauses Technical Quotation- Shall include the following: (1) Technical description and/or product literature. Quoters shall include the manufacturer, make and model of the product, manufacturer sales literature or other product literature which CLEARLY DOCUMENTS that the offered products meet the brand name only specifications outlined in the statement of requirements. It is the responsibility of the quoter to ensure that submitted documentation clearly addresses all specifications and requirements. (2) If product literature does not address any given specification, the Contractor must provide a discussion of how the Contractor will meet or exceed that required specification. Any modifications must be discussed. It is the responsibility of the quoter to ensure that the discussion clearly addresses the modification and how the required specification(s) will be met with the quoted modification. If such information is not provided, the Government will conclude that the minimum specifications have not been met. (3) The quoted delivery timeline for the contract line items. (4) A description of the quoted installation, training, and warranty. (5) A description of the quoted Option Year Extended Warranty for Option Years. Price Quotation: (1) All Quoters shall submit a firm fixed price, FOB Destination, price quotation for the contract line items. The quotation must include a unit price and total amount for each line item and the aggregate price for all contract line items. (2) The price quotation shall include a cover page with the following information: The solicitation number 1333ND25QNB640439; The name and address, of the Quoter; The name, phone number, and email address of the Quoters point of contact; Unique Entity Identifier # for Quoters active SAM.Gov registration. Any applicable discount terms. A statement that the Contractor agrees to all terms, conditions, and provisions included in the solicitation. If the Contractor objects to any of the terms and conditions contained in this solicitation, the Contractor shall state The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following: [Contractor shall list exception(s) and rationale for the exception(s)]. It is the sole responsibility of the Contractor to identify in their quote any exceptions to the terms and conditions of the solicitation. A statement that the quotation is valid for a minimum of 90 days from the response deadline of this solicitation. Completed Solicitation Provisions: A completed version of all required solicitation provisions (see attached provisions/clauses document required submissions highlighted in blue). Please note that this procurement IS NOT being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If a contractor submits a quotation based upon an FSS or GWAC contract, the Government will accept the quoted price. However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the contractors FSS or GWAC contract, and the statement required above shall be included in the quotation. PROVISIONS AND CLAUSES: The clauses and provisions applicable to this solicitation can be found under the attachment entitled Applicable Clauses & Provisions. The full text of a FAR provision or clause may be accessed electronically www.acquisition.gov/far. The full text of a CAR provision or clause may be accessed electronically at http://www.osec.doc.gov/oam/acquistion_management/policy/. ATTACHMENTS: The following attachments apply to this solicitation: 1 Statement of Requirements 2. Applicable Provisions & Clauses
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
Files (3)
- Download
SOR Instrument Rapid Cell Imager final.docx
40 KBAdded in Combined Synopsis/Solicitation version 3Posted - Download
Clauses BrandName .doc.rtf
2.4 MBAdded in Combined Synopsis/Solicitation version 3Posted - Download
Combined Synopsis Solicitation BrandName.docx
32 KBAdded in Combined Synopsis/Solicitation version 3Posted
Lifecycle
- 3Version 3Combined Synopsis/SolicitationArchivedCurrent
Rapid Cell Imager
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Sources Sought Notice for Graphite Furnace Atomic Absorption Spectrometer Notice ID: NIST-MML-FY27-SS01 Response Date: 11/28/2026 Product Service Code (PSC): 6640 NAICS Code: 334516 Background The Inorganic Chemical Metrology Group (ICMG) uses at least two measurement methods, each based on orthogonal physical principles, to certify the trace elements in candidate standard reference materials (SRM). These SRMs are intended for method validation and quality assurance in trace-element measurements to assess the nutritional value and contaminant status of agricultural products. A sensitive trace-element detector, a graphite furnace atomic absorption spectrometer (GFAAS) is sought to complement the group's inductively coupled plasma mass spectrometric (ICP-MS) measurement capability and fulfill the two independent method requirements for SRM development. Consideration will be given to GFAAS capable of direct solid-sample analysis to maximize its orthogonality relative to the liquid-sampling-based ICP-MS technique. Minimum Capabilities that NIST Requires and for Which Information is Being Requested The National Institute for Standards and Technology (NIST) located in Gaithersburg, MD is seeking information on vendors that are capable of providing a graphite furnace atomic absorption spectrometer (1) capable of measuring liquid test samples with an instrument detection limit (DL) for Cu at 0.02 µg/L or better (324.8 nm line, 50 µL sample volume, DL=3 x standard deviation of 10 replications) and (2) designed for direct introduction of solid state test samples into the graphite furnace for analyte quantification without a need of sample digestion Instructions for Responding to This Notice Parties that respond to this Notice are requested to submit the requested information via email in Microsoft Word, Adobe PDF, and/or Microsoft Excel format to the designated point(s) of contact whose name and email address appears at the bottom of this notice. Please provide only the information requested by this Notice, and do not include proprietary, classified, confidential, or sensitive information in a response to this Notice. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Information Requested in Response to This Notice: To help NIST with its market research, NIST is requesting that industry sources carefully review this notice and any attachments to it and voluntarily provide the following information: Company Summary Notice Identification: Notice ID and Title of this posting. Corporate Details: Company name, physical address, website address, and Unique Entity Identifier (UEI). Point of Contact (POC): Name, phone number, and email address. Company Size Standard: Your company’s size status relative to the NAICS code provided in this Notice. (Refer to the SBA Table of Small Business Size Standards). System for Award Management (SAM) Registration: Indicate whether your company has an active registration for procurement purposes in SAM.gov. Review the information included with this Notice, indicate whether there is anything that may inadvertently exclude domestically manufactured (made in the U.S.A.) end products from being considered; and indicate if anything included with this Notice could potentially be revised to improve the ability for domestic (“Made in America”) end products to be considered; and if a domestic end product is not currently available to meet the draft requirements/minimum specifications, please provide an estimated timeframe for when it may be domestically produced in the USA in the future if that appears to be likely. Information Regarding Commercial Products and Related Commercial Services Provide specifications, company name of the original equipment manufacturer, and the country of manufacture for commercial products and/or commercial services that your company is legally authorized to sell and that may meet NIST’s minimum requirements. Standard Commercial Pricing: Provide your company’s standard commercial pricing information for the requirements described in this Notice (including any Attachments) and explain what is included in those standard commercial prices. Estimated Price Range: You may provide an estimated price or estimated price range for the draft requirements included in this notice, including a brief explanation of how it was derived. Standard Commercial Terms and Conditions: Provide a copy of the standard commercial terms and conditions for the commercial products and/or commercial services identified in your company’s response to this Notice, including the nature and the duration of applicable standard commercial warranty(ies). Regulatory and Supply Chain Compliance Indicate whether your company could comply with RFO FAR clause 52.219-14 (Deviation JAN 2026) if this acquisition were to be set aside for small businesses (assuming that there is no waiver to the Nonmanufacturer Rule for the applicable NAICS code). Provide a brief supporting explanation. Existing Governmentwide Contract Vehicles Indicate whether your company has its own GSA Multiple Award Schedule (MAS) contract or other federal contract vehicle(s) under which NIST could award an order and, if so, provide the details of the contract(s) (contract number, Contracting Officer name/contact, SOW, terms and conditions, and price lists). Important Notes This Notice does not obligate the Government to award a contract or otherwise pay respondents to this notice for information provided in response to this Notice. Following a review of the responses and market research, NIST may publish a solicitation on an authorized site, depending on the chosen acquisition strategy. Responses received after the closing date for this Notice may not be considered. There is no solicitation available at this time. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. | 74% | Market Research | 11/28/2026 |
74% | Market Research | 12/05/2026 | |
please see attached. | 74% | Market Research | 12/03/2026 |
UT-Battelle, LLC. (the Company), is the Management and Operations Contractor for the Oak Ridge National Laboratory (ORNL), located in Oak Ridge, Tennessee. The Company seeks proposals for the Invitrogen Countless 3 FL Automated Cell Counter, or their domestic equivalents, to support a department of Energy (DOE) funded project. Request for Quotation - RFQ - PR518949, Invitrogen Countless 3 FL Automated Cell Counter Attachment A - Terms and Conditions - Purchase Order Commercial Products and Services, dated 09.30.2026 Attachment B - Prime Flowdown Clauses, dated 09.30.2026 Attachment C - Bill of Materials - PR518949 Attachment D - Reps and Certs - Abbreviated - 03.09.2026 FAR 52.211-6, Brand Name or Equal applies. | 72% | Combined Synopsis | 11/17/2026 |
Please see attached. | 68% | Market Research | 11/20/2026 |
Additional Details
Solicitation Number
1333ND25QNB640439
Archive Date
Sep 13, 2025