Archived
HIGHLY PARALLEL HIGH-PERFORMANCE COMPUTER SYSTEMS
Overview
- Response deadline
- 12:00 PM EDT
- Posted
- September 3, 2025
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- Agency
- Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
Notice details
- Office
- DEPT OF COMMERCE NIST
- Place of performance
- Gaithersburg, 20899
- Last updated
- Nov 8, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- 1333ND25QNB640484
- Notice ID
- 54fff4faf4a1406da1cec00fe6edc88a
Description
***AMENDMENT 01**** The purpose of this amendment is two-fold: 1) Post responses to questions received during Q&A period; 2) Extend the due date of the solicitation. 1. Q&A Q.1. Regarding Line Item 0003: BASE LINE ITEM, are there any RAID requirements for the storage system? A.1. No, there is no RAID requirement. The drives must be visible to the OS, and we will configure the storage at the OS level to meet the use-case requirements. Having the drives attached via a RAID controller is not disqualifying, but it's not a requirement. Q.2. For each computer system, when it says the system must be air-cooled, does this allow for liquid-cooling for the CPU as the system would still only require air cooling and not chilled liquid from outside the computer? A.2. Yes, if the system has internal liquid cooling that is self-contained, and does not require it to be plumbed in to an external liquid coolant, this meets the requirement that the system be air-cooled. Q.3. To confirm the size requirement for Line Item 0001, will you accept 2 2U chassis that house two complete computers inside? Want to confirm that's what the 1U per node means before building the quotes out. A.3. Yes, if there are two complete nodes in a 2U chassis, that meets the requirement. The wording is also meant to allow a "super-twin" chassis with four complete nodes in 2U to meet the requirement. Stand-alone single nodes in their own chassis must be 1U in height. 2. The solicitation close date is extended to 12:00 PM on September 8, 2025. ***END OF AMENDMENT*** THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A SEPARATE WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES UNDER THE AUTHORITY OF FAR PARTS 12 AND 13. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Circular (FAC) FAC 2025-05, effective August 7, 2025. The associated North American Industrial Classification System (NAICS) code for this procurement is 334111 Electronic Computer Manufacturing with a small business size standard of 1,250. This acquisition is being procured as a 100% Small Business Set-Aside. Quoters must possess an ACTIVE registration in the System for Award Management system, www.SAM.gov, when submitting a quotation and shall continue to be registered until the time of award, during performance, and through final payment of any contract resulting from this solicitation. Upon receipt of the quotation, the Contracting Officer will confirm that quoters have an active registration at the www.sam.gov website. If the SAM.Gov registration is not active, the quotation will not be considered for award. The requirement is for (a) four (4) highly-parallel high-performance computer systems, (b) one high-performance general-purpose GPU computer system bearing two GPU devices, and (c) one high-speed data storage system. The objective of this solicitation is to establish a Firm-Fixed-Price purchase order based on the specifications described in the attached Statement of Requirements (SOR). SPECIFIC REQUIREMENTS Responsible quoters shall provide a quotation for the following Contract Line Items (CLINs) in accordance with the specifications outlined in the attached Statement of Requirement. All equipment must be new. Used or remanufactured equipment will not be considered for award.: BASELINE ITEMS: LINE ITEM 0001: (Quantity 4, Each) Highly-parallel high-performance computer systems, in accordance with Statement of Requirements. LINE ITEM 0002: (Quantity 1, Each) High performance GPU computer system, in accordance with Statement of Requirements. LINE ITEM 0003: (Quantity 1, Each) High performance low latency storage system, in accordance with Statement of Requirements. OPTIONAL LINE ITEMS: Line Item 0004: (Quantity 4, Each) Highly-parallel high-performance computer systems, in accordance with the Statement of Requirements. DELIVERY TERMS Delivery terms shall be FOB Destination. The Contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery. EVALUATION CRITERIA & BASIS FOR AWARD: The Government intends to award a purchase order resulting from this solicitation to the responsible Contractor whose quotation, conforming to the solicitation, provides the lowest-priced, technically acceptable quote. Technically acceptable means that the quote: Meets or exceeds the minimum equipment specifications listed within the Statement of Requirements; Meets warranty requirements as applicable; and Meets the required delivery schedule. Price: The price evaluation will determine whether the quoted prices are fair and reasonable in relation to the solicitation requirements. Quoted prices must be entirely compatible with the technical quotation. INSTRUCTIONS: System for Award Management Registration In accordance with FAR 52.204-7, the awardee must register in the System for Award Management (SAM) (www.sam.gov) prior to the award. Failure to register forfeits the award. Completed Solicitation Provisions A completed version of all required solicitation provisions (see attached provisions/clauses document required submissions highlighted in blue). Due Date for Quotations and Questions All quotations must be submitted via e-mail to Rudolph Spencer, Contract Specialist, at rudolph.spencer@nist.gov with a carbon copy to Donald Graham, Contracting Officer, at donald.graham@nist.gov. Submissions must be received no later than 10:00 a.m. Eastern Time on September 4, 2025. FAX quotations will not be accepted. Quoters must reference the RFQ number in the subject line of the e-mail submission. Quotes shall not be deemed received by the Government until the quotation has entered the e-mail inbox of the individual(s) set forth above. Questions: All questions regarding this notice must be submitted via e-mail to rudolph.spencer@nist.gov with a carbon copy to Donald Graham, Contracting Officer, at donald.graham@nist.gov, no later than 10:00 a.m. Eastern Time on September 2, 2025. Quotation Preparation Instructions Each quotation shall consist of two (2) separate electronic files: (1) Technical Quotation and (2) Pricing Quotation. See details below: 1. Technical Quotation containing: Technical description and/or product literature. Quoters shall include the manufacturer, make and model of the product, manufacturer sales literature, or other product literature that CLEARLY DOCUMENTS that the offered products meet or exceed all specifications outlined in the statement of requirements. The quoter is responsible for ensuring the submitted documentation clearly addresses all specifications and requirements. Quoters ability to meet the required delivery schedule. Quoters ability to meet the warranty requirements. 2. Price Quotation: A Firm-Fixed Price, FOB Destination quotation inclusive of shipping and warranty, in accordance with the Statement of Requirements for all line items. The price quotation shall include a cover page with the following information: The solicitation number 1333ND25QNB640484. The name, address, and telephone number of the Quoter. Unique Entity ID# for the SAM registration. A total firm-fixed price for the requirement. Any applicable discount terms. A statement that the Contractor agrees to all terms, conditions, and provisions included in the solicitation. If the Contractor objects to any of the terms and conditions contained in this solicitation, the Contractor shall state, The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following: [Contractor shall list exception(s) and rationale for the exception(s)]. It is the Contractor's sole responsibility to identify any exceptions to the terms and conditions of the solicitation in their quote. If the Contractor does not include such a statement, the submission of a quotation in response to this solicitation will be regarded as the Contractors acceptance of the Governments terms and conditions for inclusion into the resultant purchase order. A statement that the quotation is valid for a minimum of 60 days from the response deadline of this solicitation. Please note that this procurement IS NOT being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If a contractor submits a quotation based on an FSS or GWAC contract, the Government will accept the quoted price. However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the contractors FSS or GWAC contract. PROVISIONS AND CLAUSES: The provisions and clauses applicable to this solicitation are identified in Attachment 2, titled Applicable Clauses & Provisions. The full text of a Federal Acquisition Regulation (FAR) provision or clause may be accessed electronically at www.acquisition.gov/far. The full text of a Department of Commerce Acquisition Regulation (CAR) provision or clause may be accessed electronically at http://www.osec.doc.gov/oam/acquistion_management/policy/. ATTACHMENTS: The following attachments apply to this solicitation: 1. Statement of Requirements 2. Applicable Clauses & Provisions
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Rudolph Spencer
Secondary Contact
Donald Graham
Documents
Lifecycle
- 1Version 1Combined Synopsis/SolicitationArchived
HIGHLY PARALLEL HIGH-PERFORMANCE COMPUTER SYSTEMS
- 2Version 2Combined Synopsis/SolicitationArchived
HIGHLY PARALLEL HIGH-PERFORMANCE COMPUTER SYSTEMS
- 4Version 4Combined Synopsis/SolicitationArchivedCurrent
HIGHLY PARALLEL HIGH-PERFORMANCE COMPUTER SYSTEMS
- 7Version 7Award NoticeArchived
Type changed from Combined Synopsis/Solicitation to Award Notice
HIGHLY PARALLEL HIGH-PERFORMANCE COMPUTER SYSTEMS
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This is a combined synopsis/solicitation for commercial products prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation number is HDTRA126Q0022 and is issued as a Request for Quotation (RFQ).The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) and Defense Federal Acquisition Regulation Supplement (DFARS).This acquisition is set aside 100% for Small Business. Line Item Information CLIN 0001: Commercial-Off-The-Shelf (COTS) High Performance Simulation Workstation Quantity: 2 Each Pricing Arrangement: Firm-Fixed-Price Minimum System Specifications: Total System CPU: 128 cores / 256 threads, Minimum 128 physical cores, with a base clock of at least 2.25GHz and a turbo boost capability of up to 4.5GHz or higher. Motherboard: At least one (1) usable NVMe PCIe Gen 4 (or better) slot for the boot drive, and at least one (1) usable PCIe Gen 5 x16 slot. Boot Drive: 2TB PCIe Gen 4 NVMe SSD (7,000 MB/s sequential read or greater).Work Drive: 4TB PCIe Gen 5 NVMe SSD (12,000 MB/s sequential read or greater).Storage Drive: 16TB HDD. Memory: 2TB DDR5 ECC RAM (6400MHz).Graphics Card: 96GB VRAM with native Compute Unified Device Architecture (CUDA) support. Networking: On-board 1x Gbps. Cooling: Desktop-friendly quiet air or water-cooling. No server-grade fans. Power Supply: Minimum 2000W, Platinum-rated efficiency. OS: Windows 11 Pro or Windows 11 Pro for Workstations. Stress Testing: The system must undergo comprehensive stress testing to verify it operates at optimal performance and temperature. This testing must ensure no system crashing occurs due to overheating or hardware failures within an ambient working environment ranging from 73-81 degrees Fahrenheit. A final test report documenting these results and system stability must be provided to the Government to facilitate final inspection and acceptance of the hardware. Warranty: Standard commercial warranty, including coverage for all parts and labor. Condition: New equipment ONLY. No remanufactured or gray market items are acceptable. Delivery Information Delivery Date: On or before October 5, 2026.FOB Point: Destination Shipping Address: DEFENSE THREAT REDUCTION AGENCYCENTRAL PROCESSING FACILITY6200 MEADE ROAD BLDG. 1976FORT BELVOIR, VA 22060UNITED STATES Special Delivery Instructions: Delivery couriers will be subject to visitor access procedures at Fort Belvoir. Couriers without existing sponsorship privileges require 72 hours notice to the DTRA Ship-To point of contact to establish sponsorship. Instructions to Offerors (Addendum to FAR 52.212-1)Offerors shall submit a single, consolidated proposal in response to this solicitation. Include your company Unique Entity Identifier (UEI) Number, Point of Contact, and CAGE Code on your quote. Submission Method: All quotations shall be submitted via the Procurement Integrated Enterprise Environment (PIEE) Solicitation Portal. Submissions will NOT be accepted via email under any circumstances. Proposal Contents: Pricing Information: A completed SF 1449 (or equivalent quote document) with the unit price of the offeror and total price for CLIN 0001. The unit price shall be all-inclusive for one workstation, including FOB Destination shipping. Technical Information: A technical narrative demonstrating that the proposed product meets or exceeds every minimum specification listed above. The technical portion must use a format for a direct, one-to-one comparison between the minimum specification of the Government and the proposed item of the offeror. OEM Authorization: Offerors shall be an Original Equipment Manufacturer (OEM), an OEM authorized dealer, an authorized distributor, or an authorized reseller for the proposed equipment. Questions: All questions regarding this solicitation shall be submitted via email to the primary POC no later than 11:00 AM on July 24, 2026. Reference this combined synopsis/solicitation number in the Subject line of your email. Evaluation Factors for Award (Addendum to FAR 52.212-2)The Government intends to award a firm-fixed-price contract to the responsible offeror who submits the lowest-priced, technically acceptable proposal. This is a Lowest Price Technically Acceptable (LPTA) source selection. Step 1: Technical Acceptability Evaluation. Proposals will be evaluated on a pass or fail basis. To receive a pass, the proposal must demonstrate that the proposed workstation meets or exceeds all minimum specifications. Any proposal that fails to meet one or more minimum specifications will be rated fail and removed from consideration.Step 2: Price Evaluation.Proposals determined to be technically acceptable will be ranked by the Grand Total price for CLIN 0001 (Quantity 2). The Government will evaluate the total price for reasonableness.Applicable Clauses and ProvisionsThe following FAR and DFARS provisions and clauses apply to this acquisition (inclusive of, but not limited to):FAR 52.212-1, Instructions to Offerors - Commercial Products and Commercial ServicesFAR 52.212-2, Evaluation - Commercial Products and Commercial ServicesFAR 52.212-3, Offeror Representations and Certifications - Commercial Products and Commercial ServicesFAR 52.212-4, Terms and Conditions - Commercial Products and Commercial ServicesFAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders - Commercial Products and Commercial ServicesFAR 52.219-6, Notice of Total Small Business Set-AsideFAR 52.225-5, Trade AgreementsDFARS 252.204-7016 / 7017 / 7018, Covered Defense Telecommunications Equipment or ServicesDFARS 252.211-7003, Item Unique Identification and ValuationDFARS 252.225-7021, Trade AgreementsDFARS 252.232-7006, Wide Area WorkFlow Payment InstructionsAll supplies must be Trade Agreements Act (TAA) compliant in accordance with FAR 52.225-5 and DFARS 252.225-7021. | 57% | Combined Synopsis | 07/29/2026 |
54% | Market Research | 12/05/2026 | |
Subject award was made as a result of corrective action taken in accordance with GAO protest file B-424837. | 52% | Awarded | Open |
Sources Sought Notice for Graphite Furnace Atomic Absorption Spectrometer Notice ID: NIST-MML-FY27-SS01 Response Date: 11/28/2026 Product Service Code (PSC): 6640 NAICS Code: 334516 Background The Inorganic Chemical Metrology Group (ICMG) uses at least two measurement methods, each based on orthogonal physical principles, to certify the trace elements in candidate standard reference materials (SRM). These SRMs are intended for method validation and quality assurance in trace-element measurements to assess the nutritional value and contaminant status of agricultural products. A sensitive trace-element detector, a graphite furnace atomic absorption spectrometer (GFAAS) is sought to complement the group's inductively coupled plasma mass spectrometric (ICP-MS) measurement capability and fulfill the two independent method requirements for SRM development. Consideration will be given to GFAAS capable of direct solid-sample analysis to maximize its orthogonality relative to the liquid-sampling-based ICP-MS technique. Minimum Capabilities that NIST Requires and for Which Information is Being Requested The National Institute for Standards and Technology (NIST) located in Gaithersburg, MD is seeking information on vendors that are capable of providing a graphite furnace atomic absorption spectrometer (1) capable of measuring liquid test samples with an instrument detection limit (DL) for Cu at 0.02 µg/L or better (324.8 nm line, 50 µL sample volume, DL=3 x standard deviation of 10 replications) and (2) designed for direct introduction of solid state test samples into the graphite furnace for analyte quantification without a need of sample digestion Instructions for Responding to This Notice Parties that respond to this Notice are requested to submit the requested information via email in Microsoft Word, Adobe PDF, and/or Microsoft Excel format to the designated point(s) of contact whose name and email address appears at the bottom of this notice. Please provide only the information requested by this Notice, and do not include proprietary, classified, confidential, or sensitive information in a response to this Notice. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Information Requested in Response to This Notice: To help NIST with its market research, NIST is requesting that industry sources carefully review this notice and any attachments to it and voluntarily provide the following information: Company Summary Notice Identification: Notice ID and Title of this posting. Corporate Details: Company name, physical address, website address, and Unique Entity Identifier (UEI). Point of Contact (POC): Name, phone number, and email address. Company Size Standard: Your company’s size status relative to the NAICS code provided in this Notice. (Refer to the SBA Table of Small Business Size Standards). System for Award Management (SAM) Registration: Indicate whether your company has an active registration for procurement purposes in SAM.gov. Review the information included with this Notice, indicate whether there is anything that may inadvertently exclude domestically manufactured (made in the U.S.A.) end products from being considered; and indicate if anything included with this Notice could potentially be revised to improve the ability for domestic (“Made in America”) end products to be considered; and if a domestic end product is not currently available to meet the draft requirements/minimum specifications, please provide an estimated timeframe for when it may be domestically produced in the USA in the future if that appears to be likely. Information Regarding Commercial Products and Related Commercial Services Provide specifications, company name of the original equipment manufacturer, and the country of manufacture for commercial products and/or commercial services that your company is legally authorized to sell and that may meet NIST’s minimum requirements. Standard Commercial Pricing: Provide your company’s standard commercial pricing information for the requirements described in this Notice (including any Attachments) and explain what is included in those standard commercial prices. Estimated Price Range: You may provide an estimated price or estimated price range for the draft requirements included in this notice, including a brief explanation of how it was derived. Standard Commercial Terms and Conditions: Provide a copy of the standard commercial terms and conditions for the commercial products and/or commercial services identified in your company’s response to this Notice, including the nature and the duration of applicable standard commercial warranty(ies). Regulatory and Supply Chain Compliance Indicate whether your company could comply with RFO FAR clause 52.219-14 (Deviation JAN 2026) if this acquisition were to be set aside for small businesses (assuming that there is no waiver to the Nonmanufacturer Rule for the applicable NAICS code). Provide a brief supporting explanation. Existing Governmentwide Contract Vehicles Indicate whether your company has its own GSA Multiple Award Schedule (MAS) contract or other federal contract vehicle(s) under which NIST could award an order and, if so, provide the details of the contract(s) (contract number, Contracting Officer name/contact, SOW, terms and conditions, and price lists). Important Notes This Notice does not obligate the Government to award a contract or otherwise pay respondents to this notice for information provided in response to this Notice. Following a review of the responses and market research, NIST may publish a solicitation on an authorized site, depending on the chosen acquisition strategy. Responses received after the closing date for this Notice may not be considered. There is no solicitation available at this time. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. | 49% | Market Research | 11/28/2026 |
please see attached. | 49% | Market Research | 12/03/2026 |
Additional Details
Solicitation Number
1333ND25QNB640484
Archive Date
Sep 12, 2025