GovChime
Notice ID: e748e68fcdd244fca59da98bbb89ed5dAward NoticeAwarded

20--BIOFILTER STANDARD BEAD MEDIA

Awarded on September 25, 2020. Full description on SAM.gov.

Awarded tounder 140F0220P0111 (source: SAM.gov award notice)• $31.7K

Overview

Posted
November 3, 2020
Notice type
Award Notice
NAICS
326199: All Other Plastics Product Manufacturing
Agency
Department of the Interior

Notice details

Place of performance
25 Hatchery Rd, Hwy 434, Mile 2, Mora, NM, 87732
Last updated
Sep 9, 2025
Award date
Sep 25, 2020
Award amount (SAM.gov award notice)
$31.7K

Identifiers

Solicitation number
140F0220Q0059
Notice ID
e748e68fcdd244fca59da98bbb89ed5d
Award number (PIID)
140F0220P0111

Description

Bio Filter Bead Media 1/8th Polyethylene beads with specific gravity of 0.92

Full description on SAM.gov

Award Overview

Award Number

140F0220P0111

Award Amount (SAM.gov award notice)

$31.7K

Award Date

Sep 25, 2020

Awardee

Awardee UEI

H9N3LNQ4H3D7

Original Solicitation

Notice ID: e748e68fcdd244fca59da98bbb89ed5d

Posted Date: Nov 3, 2020

Original Response Deadline: Not specified

Contacts

Documents

No documents available.

Lifecycle

Solicitation:140F0220Q0059
  1. Solicitation
  2. Awarded

This opportunity has been awarded.

  1. SolicitationSep 3, 2020

    BIOFILTER STANDARD BEAD MEDIA

    Notice f9228fd0aeca46faafdf52814c4d63e5 on SAM.gov

  2. AwardedCurrentNov 3, 2020

    20--BIOFILTER STANDARD BEAD MEDIA

    Notice e748e68fcdd244fca59da98bbb89ed5d on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
3D-Printed Siloxane Composites with Hydrogen Getter Capability Unwanted hydrogen is a silent threat inside sealed electronics, vacuum instruments and metal containers, where it clouds optics, embrittles metals and can build toward explosive levels. SiloGetter from Los Alamos National Laboratory answers that threat with a printable siloxane composite that captures hydrogen right at its source while carrying nearly 10 times the active getter content of earlier printed materials. Because the paste flows through nozzles as fine as 400 microns without clogging, protection can be shaped precisely to the geometry a device demands, and because the finished part keeps its strength instead of crumbling like a pressed pellet, that protection endures. The result is a rugged, made-to-fit hydrogen safeguard that quietly protects costly systems over the long term while absorbing more than 80% of the hydrogen it encounters. Overview The material relies on a straightforward principle carried out by two ingredients working together. Tiny particles of a palladium-on-carbon catalyst split incoming hydrogen molecules into reactive atoms, and a companion compound, DEB, permanently binds those atoms into its molecular structure so the hydrogen can no longer move or ignite. Both ingredients are dispersed throughout a siloxane polymer, a silicone-like plastic chosen because gases pass through it easily, which gives hydrogen a clear path to the active particles inside. The blended paste is then printed by direct ink writing, a method that pushes the resin through a fine nozzle and stacks it layer by layer into whatever shape the application requires. Once cured, the printed part behaves like a solid, high-surface-area sponge for hydrogen and keeps absorbing steadily until its capacity is reached. Technology Description At the heart of SiloGetter is a reformulated composite resin that resolves the trade-offs that limited earlier printed getters. Previous silicone-based getters could incorporate only about 5 weight percent of the active DEB and palladium-on-carbon getter, and their base resins tended to react with DEB at the temperatures reached during processing, which lowered both hydrogen capacity and mechanical integrity. The new siloxane formulation stays chemically inert toward DEB even at 75 degrees Celsius, so the active chemistry survives fabrication intact; that stability lets the composite carry roughly 50 weight percent getter, a nearly tenfold increase, without sacrificing the strength of the finished part. Equally important is the way the resin behaves during printing. Carefully engineered flow properties allow the high-loading paste to move smoothly through direct-ink-writing nozzles as narrow as 400 microns without clogging, so intricate, high-surface-area shapes can be produced reliably. Because siloxane polymers are highly permeable to gases, hydrogen diffuses readily to the embedded catalyst and getter throughout the printed body rather than only at its surface, and the finished composites absorb more than 80 percent of available hydrogen while retaining good mechanical properties. Taken together, these traits turn a historically fragile, hard-to-handle getter into a robust, customizable component that can be designed directly into the systems it protects. Advantages • Captures far more hydrogen per part, holding roughly 50 percent getter by weight, close to ten times the content of prior printed materials • Prints into custom shapes by direct ink writing, even through nozzles as fine as 400 microns, without clogging • Replaces loose powders and brittle pellets with strong, durable parts that are easy to handle and install • Highly gas-permeable siloxane base gives hydrogen easy access to the active material, yielding better than 80% absorption efficiency • Stable formulation avoids unwanted reactions between the resin and the getter, even at elevated temperature near 75 degrees Celsius • Adaptable to many geometries and uses, so protection can be tailored to each system Market Applications • Microelectronics Packaging (hermetically sealed modules and integrated device packages that outgas hydrogen) • Vacuum and Scientific Instrumentation (ultrahigh vacuum systems and equipment) • Aerospace (metal components exposed to hydrogen-rich conditions) TRL 4 U.S. Patent pending LA-UR-26-27370 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
-Special Notice03/02/2027
NMSO WILDLIFE WATER GUZZLER TANK SUPPLY
-Solicitation11/12/2026
NMSO WILDLIFE WATER GUZZLER TANK SUPPLY
-Solicitation10/28/2026
REVERSE OSMOSIS MEMBRANES
-AwardedOpen
Delivery Location: Belcourt, ND
-Combined Synopsis11/19/2026

Additional Details

Solicitation Number

140F0220Q0059

Archive Date

Nov 18, 2020

Office Address

ALBUQUERQUE, NM, 871031306