Notice ID: 3a11aa0bb2d74d99bd732111391f3c82Combined Synopsis/Solicitation
54--8x8 Enclosure with Installation
Archived on July 21, 2021. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM UTC−05:00
- Posted
- July 1, 2021
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 332311: Prefabricated Metal Building and Component Manufacturing
- Agency
- Department of the InteriorUS GEOLOGICAL SURVEY
Notice details
- Office
- OFFICE OF ACQUISITON GRANTS
- Last updated
- Sep 9, 2025
Identifiers
- Solicitation number
- 140G0321Q0118
- Notice ID
- 3a11aa0bb2d74d99bd732111391f3c82
Description
Synopsis/Solicitation Combo INTRODUCTION This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations/proposals are being requested and a separate written solicitation will not be issued. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2021-05, effective 10 March 2021. This acquisition is a total small business set-aside. The associated NAICS code is 332311 Prefabricated Metal Building and Component Manufacturing with an associated size standard 750 employees. SPECIFICATION The U.S. Geological Survey, Volcano Science Center, seeks a firm to provide a robust and highly durable communications shelter to be installed as part of a remote monitoring network near Mount Rainier as described in the solicitations Statement of Work. Please see solicitation document(s) for a detailed description and solicitation provisions/clauses. SUBMISSION OF QUOTATIONS/PROPOSALS Quotations/Proposals shall only be accepted through electronic mail addressed to the Contracting Officer at nlushenko@usgs.gov. All proposal documents required by this solicitation must be uploaded and received in their entirety no later than 24 June 2021 at 1700 Eastern Time. For further information, please contact Nik Lushenko, Contracting Officer, at (916) 278-9331 or nlushenko@usgs.gov.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
140G0321Q0118- Pre-Solicitation
- Combined Synopsis
- Pre-SolicitationJun 15, 2021
54--8x8 Enclosure with Installation
- 3×Combined SynopsisCurrentJun 15, 2021
54--8x8 Enclosure with Installation
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
**W912EE** Amendment Three- The purpose of this amendment is to include pictures that were requested and to include ProjNet Questions and answers. There is no change to the Scope of Work or the Request for Quote due date. Amendment Two- The purpose of this amendment is to update the Scope of Work to include color of metal building. Scope of work says "paint of industrial enamel on color 'tan' with 'brown' trin & gutters. Please see attached Scope of Work. Amendment One - The purpose of this amendment is to update the Scope of Work details and change the set aside type to unrestricted. The request for quotes date is changed to November 6, 2026, at 3PM Central Time. Please see updated Scope of Work and Amendment. Arkabutla Lake Water Plant Rehab and Pre-fabricated Metal Building Installation This is a solicitation for commercial items prepared in accordance with the format in RFO Part 12, as supplemented with additional information included in this notice. Solicitation Number W912EE27QA002 is being issued as a request for quote (RFQ) with the intent to issue one Firm-Fixed Price Contract. This solicitation is being issued under 100% small business set aside. The NAICS code for this procurement is 332311, Prefabricated Metal Building and Component Manufacturing, with a size standard of 750 employees. This procurement is being conducted in accordance with regulations at RFO Part 12 - Acquisition of Commercial Products and Commercial Services. The U.S. Army Corps of Engineers, Arkabutla lake Project, has a requirement to procure one metal building to cover and protect the new well. Arkabutla Lake Project has previously had a new well installed and now requires the old well to be abandoned and the surrounding small 30 x 50 building to be rehabbed to continue to protect the new well. The USACE personnel will perform prep work prior to deliver and install by removing the old building where replacement pre-fabricated building will be delivered and installed. Please see below for details. General Specification: Abandon old well Install new plumbing includes valves to meet AWWA C-509 specs, flange fitting to meet AWWA specs, watts 2” pressure reducer, 2” flange master meter, Stenner model 45MHP10 chemical pump, 3 phase air compressor, accessories and fittings to connect and create a working system Purchase, deliver, & install one (1) 30’x50’ pre-fabricated metal Red Iron open span building with 12’ tall eaves, 26-gauge roof & walls, one (1) roll up door, one (1) 3’x7’ walk through door, insulation, and gutters. Building will include engineer’s stamped drawings for the building and a set of anchor bolt plans. Sand blast and paint tank with one (1) coat Tnemec-Zinc 3-5ml inside and out. Second coat inside Tnemec series 21 6-9ml. Third coat inside Tnemec series 216-9ml. Second coat outside L140 epoxy 6-9ml. Third coat outside 1094 urethane 5-7ml. Install new electrical including 200-amp enclosed circuit breaker outside (2020 NEC requirement), 200-amp main breaker panel inside, pump control panel with motor starter to control well, disconnect at well, six (6) 8” long LED strip lights, two (2) 55 watt outside lights with photocell, ten (10) 120V outlets including an outside GFCI, 3 phase circuit for air compressor, and reconnect existing pressure controls on tank The contractor shall provide all supervision, labor, tools, equipment, and tools necessary for purchase and installation no later than 120 days after award. Additional information about the specifications for this equipment is listed in the scope of work. All Offerors shall submit a quote with content as specified herein. Quotes submitted without the specified content may be determined unsuccessful and removed from further consideration. Offers are encouraged to review all clauses that are incorporated into this solicitation. ****SPECIAL ATTENTION SHOULD BE FOCUSED ON RFO 52.212-2 EVALUATION – COMMERCIAL PRODUCTS, AS THIS CLAUSE OUTLINES THE EVALUATION FACTORS AND BASIS FOR AWARD FOR THIS REQUIREMENT. **** The government intends to make one award for one firm fixed price contract. Offers for less than the required delivery will not be accepted. The Government intends to award without discussions while reserving the right to hold discussions if determined advantageous to the Government. Offerors are encouraged to provide their best proposed pricing in their initial offer. Notes to Offerors: A BIDDING SCHEDULE MUST BE SENT IN WITH YOUR QUOTE. Quotes shall be submitted electronically via email, to: afton.riles@usace.army.mil. For questions and technical inquiries please see instructions below. You are responsible for reading all information contained in this solicitation and all attachments if any posted with it. Offerors should check the SAM.gov web site often for modifications to this solicitation. Offerors are responsible for ensuring their quotes arrive timely. TECHNICAL INQUIRIES AND QUESTIONS Technical inquiries and questions relating to this solicitation are to be submitted via Bidder Inquiry in ProjNet at (https://www.projnet.org). Offerors are encouraged to submit questions early in the advertisement process, in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary. Any questions submitted within the 72 hours window of the solicitation closing date are not guaranteed a response will be provided. To submit and review inquiry items, prospective vendors will need to use the Bidder Inquiry Key presented below and follow the instructions listed below the key for access. The Solicitation Number is: W912EE27QA002, Arkabutla Lake Water Plant Rehab and Pre-fabricated Metal Building Installation The Bidder/Offeror Inquiry Key is: MX684V-PQ8W9T Specific Instructions for ProjNet Bid Inquiry Access: From the ProjNet home page linked above, click on Quick Add on the upper right side of the screen. Identify the Agency. This should be marked as USACE. Key. Enter the Bidder Inquiry Key listed above. Email. Enter the email address you would like to use for communication. Click Continue. A page will then open saying that a user account was not found and will ask you to create one using the provided form. Enter your First Name, Last Name, Company, City, State, Phone, Email, Secret Question, Secret Answer, and Time Zone. Make sure to remember your Secret Question and Answer as they will be used from this point on to access the ProjNet system. Click Add User. Once this is completed you are now registered within ProjNet and are currently logged into the system. Bidders/Offerors are requested to review the specification in its entirety, review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry. The call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800-428-HELP. | 67% | Combined Synopsis | 11/06/2026 |
Amended to add set aside code added days to accomodate change Prefabricated steel sheds with Installation Labor Solicitation | 61% | Combined Synopsis | 11/18/2026 |
**The purpose of this amendment is to cancel this solicitation in its entirety. The Government will resolicit at a future date.** The U.S. Army Corps of Engineers, Memphis District has a requirement for a one (1) equipment shed. The solicitation number is W912EQ26QA044 and is being issued as a Request for Quote (RFQ). This is an small business set-aside procurement. The associated NAICS code is 332311. Response to this solicitation must be received via email by date and time indicated on solicitation; regardless of method of delivery, it is the offerors responsibility to ensure receipt of quote by the time and date stated therein. Quotes should be marked with solicitation number W912EQ26QA044 and addressed to Kirk A. Middleton, Phone (901) 273-3252, Kirk.A.Middleton@usace.army.mil. Vendors not registered in System for Award Management Registration (SAM) database prior to award will not be eligible for award. Vendors may register for SAM by registering online at www.sam.gov. In accordance with FAR 52.204-7, all vendors shall be registered in System for Award Management (SAM) prior to award, during performance and through final payment of any contract. North American Industry Classification System (NAICS) Code applicable (332311) to this acquisition must be in vendors SAM registration. | 61% | Combined Synopsis | 11/18/2026 |
Contractor shall supply and deliver within 12 weeks, a complete ready-to-assemble, heavy-duty commercial-grade galvanized steel carport kit measuring 16 feet to18 feet in width by 35 feet to 38 feet in length, 8 feet legs with a maximum height of 10 feet at the roof peak. This is a materials only procurement; the vendor is responsible for delivery of all components but shall not perform any on-site assembly or installation. The structural framing kit must feature a minimum of 14 gauge galvanized steel tubing to ensure industrial grade strength and comprehensive corrosion resistance. The roofing material package must utilize an A frame vertical panel configuration composed of a minimum 29 gauge steel panels with a weather-resistant finish; horizontal roof systems are not acceptable due to drainage requirements over the 36-foot span. All supplied components, when assembled according to the manufacturers instructions, must meet certified engineering ratings capable of resisting wind speeds of at least 130 MPH and a minimum snow load capacity of 30 PSF. Additionally, the vendor shall supply a complete, heavy-duty anchoring kit engineered specifically for the target installation surface (concrete, asphalt, or ground) along with all necessary assembly hardware and detailed, step by step installation instructions. All materials and structural components must strictly comply with ASTM standards for cold-formed steel structural members. Spec Sheet with picture of product required in offer. Buy American Form Required. | 61% | Combined Synopsis | 08/26/2026 |
SOLICITATION NOTICE: The 173rd Fighter Wing Mission Support Contracting Office is seeking a Prefabricated Shelter, prefabricated or precast, for delivery and placement at Kingsley Field Air National Guard Base in Klamath Falls, Oregon 97603. | 61% | Solicitation | 06/19/2026 |
Additional Details
Solicitation Number
140G0321Q0118
Archive Date
Jul 21, 2021
Office Address
SACRAMENTO, CA, 95819