GovChime
Notice ID: 71416460c925480face829fd57b1dd34Solicitation

Z--GAOA GRUB DAM REHABILITATION

Archived on February 17, 2022. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
2:00 PM UTC−06:00
Posted
January 31, 2022
Notice type
Solicitation
NAICS
237990: Other Heavy and Civil Engineering Construction
Agency
Department of the InteriorBUREAU OF LAND MANAGEMENT

Notice details

Office
NATIONAL OPERATIONS CENTER
Last updated
Sep 9, 2025

Identifiers

Solicitation number
140L0622R0003
Notice ID
71416460c925480face829fd57b1dd34

Description

GAOA GRUB DAM REHABILITATION

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:140L0622R0003
  1. Market Research
  2. Pre-Solicitation
  3. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. Market ResearchNov 16, 2021

    Z--GAOA GRUB DAM REHABILITATION

    Notice 0610b41d54de43e190f3b23808bbe1c7 on SAM.gov

  2. Pre-SolicitationDec 17, 2021

    Z--GAOA GRUB DAM REHABILITATION

    Notice 2acede93f4d64303983e02290bd4a231 on SAM.gov

  3. 4×
    SolicitationCurrentJan 3, 2022

    Z--GAOA GRUB DAM REHABILITATION

    Notice 71416460c925480face829fd57b1dd34 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
* Bid Abstract uploaded September 21, 2026. * Amendment 0003 - The purpose of this amendment is to make the following changes to the solicitation: SOLICITATION CLOSING DATE The solicitation closing date is hereby extended from Friday, September 18, 2026, at 9:00 PM Pacific Daylight Time (PDT) to Monday, September 21, 2026, at 9:00 AM Pacific Daylight Time (PDT). NEW SOLICITATION CLOSING DATE: Monday, September 21, 2026, at 9:00 AM Pacific Daylight Time (PDT) BID OPENING The bid opening will be conducted on Monday, September 21, 2026, at 10:00 AM Pacific Daylight Time (PDT). Bids received prior to the solicitation closing date and time will be secured and opened at the date and time specified above. Will send TEAMs link once BID is received. *Amendment 0002 - The purpose of this amendment is to make the following changes to the solicitation: 1. Extend the Solicitation Closing Date: The solicitation closing date is hereby extended by one week, from September 11, 2026, to September 18, 2026. 2. Clarify Bidder Inquiry Deadline: The bidder inquiry provision is revised from: No response will be posted to inquiries after Close of Business on the seventh business day preceding the solicitation due date to: The deadline for submission of bidder inquiries is Close of Business on the seventh business day preceding the solicitation due date. Inquiries received after this deadline may not be answered. 3. Add Pertinent Documents/Attachments: The following six (6) documents/attachments are hereby added to the solicitation: A9 - Work Space Access Trailer and Parking Location, A10 - Pump Access, A11 - Propeller Condition, A12 - JDA Fish Pump rehab drawings, A13 - SouthFishwayPumps_OandM Manual, A14 - SouthFishTurbine-Unit3_OandM Manual (all documents previously designated as CUI have been downgraded) 4. Remove Attachment: Attachment AMD0002_Technical Sections.pdf is hereby removed from the solicitation. 5. Revise Specifications: The following revisions are hereby incorporated into the solicitation specifications: File Section Changes Specifications 15 00 00.03 25 Paragraph 1.4.2 is revised to change pump shaft assembly and propeller assembly to vertical shaft assembly. Paragraph 2.1.2 is revised to change pumpshaft to pump propeller. Specifications 01 10 10.00 25 Paragraph 1.6.b is amended to extend the outage window through June 30, 2028.Specifications 09 97 02.00 25 Paragraph 3.5 is amended to include the extension shaft in the painting schedule. All other terms and conditions of the solicitation remain unchanged.*Amendment 0001 - The purpose of this amendment is to extend the solicitation closing date by two weeks from August 28, 2026 to September 11, 2026. All other terms and conditions of the solicitation remain unchanged. PROJECT TITLE: JOHN DAY FISH PUMP REHABILITATION PROJECT LOCATION: JOHN DAY LOCK AND DAM, RUFUS, OR DESCRIPTION: REMOVAL, REFURBISHMENT, AND REPLACEMENT OF MAJOR COMPONENTS OF FISH PUMP UNIT 1, INCLUDING BUT NOT LIMITED TO SHAFTS, BEARINGS, BEARING BRACKETS, AND RIGHT-ANGLE DRIVE GEARBOXES. MAGNITUDE OF CONSTRUCTION: BETWEEN $5,000,000 - $10,000,000 NAICS: 237990 OTHER HEAVY AND CIVIL ENGINEERING CONSTRUCTION SIZE STANDARD: $45,000,000 SOCIO-ECONOMIC CONSIDERATIONS: TOTAL SMALL BUSINESS SET-ASIDE Bid Opening: Monday, September 21st, 2026, at 10:00 AM Pacific Daylight Time (PDT). Will send TEAMs link once BID is received. Due to CMMC access requirements, in order to gain access to CUI attachments, please verify your organization has a minimum CMMC Level 1 Self verification and submit your CMMC Unique Identifier Number and CAGE Code via email to joseph.b.jarvis@usace.army.mil and cory.r.pfenning@usace.army.mil. BIDS DUE: Friday, September 18th, 2026, at 09:00 PM Pacific Daylight Time (PDT). BID OPENING: Monday, September 21st, 2026, at 10:00 AM Pacific Daylight Time (PDT).
82%
Solicitation09/21/2026
********** SOURCES SOUGHT TECHNICAL DESCRIPTION AND MARKET SURVEY FOR LARGE-SCALE CIVIL WORKS CONSTRUCTION ********** ********** INTRODUCTION ********** ********** The United States Army Corps of Engineers (USACE), Chicago District is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support the requirement for Thomas J O Brien Lock and Dam Major Rehabilitation - Construction, Chicago, Cook County, Illinois. The intention is to procure these construction services on a competitive basis. ********** ********** BASED ON THE RESPONSES TO THIS SOURCES SOUGHT NOTICE/MARKET SURVEY, THIS REQUIREMENT MAY BE SET-ASIDE FOR SMALL BUSINESSES (IN FULL OR IN PART) OR PROCURED THROUGH FULL AND OPEN COMPETITION. All Small Business Set-Aside categories will be considered. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions. ********** ********** The contract type is anticipated to be Firm Fixed Price construction contract, using FAR Part 15 solicitation procedures. The proposed contract is subject to Construction Wage Rate Requirements. ********** ********** North American Industry Classification System Code (NAICS): 237990 - Other Heavy and Civil Engineering Construction (Size Standard: $45.0M) ********** Product Service Code (PSC): Z2KA - Repair or Alteration of Dams / Navigation Structures ********** Duration of Performance: Estimated at Three (3) Years; 1,095 calendar days. Specifics regarding the number of option periods will be provided in the solicitation. ********** Place of Performance: Thomas J O Brien Lock and Dam Major Rehabilitation - Construction, Chicago, Cook County, Illinois ********** ********** DISCLAIMER: THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. RESPONSES WILL NOT BE RETURNED TO THE RESPONDER. NOT RESPONDING TO THIS NOTICE DOES NOT PRECLUDE PARTICIPATION IN ANY FUTURE REQUEST FOR QUOTE (RFQ) OR INVITATION FOR BID (IFB) OR RFP, IF ANY ISSUED. IF A SOLICITATION IS RELEASED, IT WILL BE SYNOPSIZED ON THE GOVERNMENT-WIDE POINT OF ENTRY (GPE). IT IS THE RESPONSIBILITY OF POTENTIAL OFFERORS TO MONITOR THE GPE FOR ADDITIONAL INFORMATION PERTAINING TO THIS REQUIREMENT. ********** ********** PROGRAM BACKGROUND ********** ********** The U.S. Army Corps of Engineers (USACE), Chicago District (LRC), is preparing an acquisition strategy for Phase 2 construction of the T.J. O Brien Lock and Controlling Works Major Rehabilitation project on the Calumet River in Chicago, Cook County, Illinois. The facility features a 110 ft by 1,000 ft lock chamber with concrete-capped circular sheet pile cells and low-lift sector gates regulating water exchange between Lake Michigan and the inland waterway network. As the requiring activity, USACE Chicago District delivers comprehensive engineering, design, and construction management to execute structural, mechanical, and electrical revitalization, ensuring long-term operational reliability and structural integrity. ********** ********** REQUIRED CAPABILITIES ********** ********** The scope of this requirement includes: ********** ********** *Repair and strengthening of the upper and lower guide walls and chamber lock walls through grout injection. ***Repair of a portion of the upper guide wall that was impacted by a barge in early 2026. ***Replacement of the existing sector gate operating machinery with modern equipment Revisions to the sump pump pits under the control houses for ease of maintenance ***Replacement of site hatches and covers, removal of unused pits, and rehabilitation of associated concrete and drains ***Replacement of the culvert valve gates and actuators ***Installation of two new jib cranes to service all four screens for gate openings on the controlling works ***Replacement of all gates and actuators at the controlling works ***Various upgrades to the electrical service, ductbank, and control systems associated with the items previously listed ***Upgrades to the emergency lighting and circuitry in the lock house and maintenance garage ***Upgrades to the backup generator and uninterruptible power supplies ***Revisions to the main lock house roof drain outfall to eliminate backups into the lock house when the lock water near the outlet freezes during cold weather. ********** ********** SPECIAL REQUIREMENTS AND MARKET INQUIRIES: ********** ********** Business Section ********** ********** Section A - CORPORATE CAPACITY and BONDING ********** ********** If your organization has the potential capacity to perform these contract services, please provide the following information: ********** ********** 1. This requirement involves large-scale, high-risk civil works construction. Potential offerors must demonstrate that their available single-project bonding limit and working capital capacity are sufficient to support a single contract whose total commitment significantly exceeds the annual revenue size standard established for NAICS 237990. Please submit a formal letter of bondability from your surety specifying your single-project limit, aggregate limit, and remaining uncommitted capacity. If utilizing a Joint Venture or teaming arrangement to meet bonding and financial underwriting requirements, detail the administrative structure and combined capacity. ********** ********** 2. Please note that under a Small-Business Set-Aside, in accordance with FAR 52.219-14 (Limitations on Subcontracting), the small business prime must perform at least 15% of the work themselves in terms of the cost of performance, excluding materials. Please provide your tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements. ********** ********** 3. Small Business Subcontracting: Should this requirement be solicited as Full and Open Competition, other-than-small-business offerors will be required to submit an acceptable Small Business Subcontracting Plan in accordance with RFO 19.109 and 52.219-9, as applicable. ********** ********** Interested firms are requested to describe their experience meeting small business subcontracting goals on comparable construction projects, identify potential subcontracting opportunities for small businesses, and provide preliminary estimated subcontracting percentages by socioeconomic category. Firms should also identify anticipated challenges and strategies to maximize small business participation. ********** ********** 4. Provide a comprehensive company profile including current small/large business status and socioeconomic ownership status (Small, Small Disadvantaged, Women-Owned, HUBZone, or Service Disabled Veteran-Owned Small Business Concern), company profile to include number of employees, annual revenue history, office locations, UEI number, etc. ********** ********** 5. Can or has your company managed a team of subcontractors before? If so, provide details. ********** ********** 6. Can or has your company managed a task of this nature? If so, please provide details. ********** ********** SECTION B - PROJECT LABOR AGREEMENT (PLA) EVALUATION ********** ********** To assist USACE in evaluating the practicability, efficiency, and market impact of a Project Labor Agreement (PLA) pursuant to OMB Memorandum M-25-29 and federal procurement law: ********** ********** 1. Would your firm submit an offer for this project if a PLA is mandated? ********** ********** 2. Does your firm currently operate under collective bargaining agreements with building and construction trades in Cook County / Northern Illinois? ********** ********** 3. What is your assessment of the local skilled labor pool in Cook County for specialized trades (e.g., marine divers, heavy rigging, hydraulic mechanics, certified structural welders)? ********** ********** 4. Would requiring a PLA impact your project pricing or labor cost structure? If yes, estimate the anticipated percentage impact and explain the underlying cost drivers (e.g., benefit contributions, work rules, specialty subs). ********** ********** 5. Identify any operational benefits or significant risks associated with utilizing a PLA for this specific requirement. ********** ********** Technical Section ********** ********** SECTION C - TECHNICAL CAPABILITIES AND EXPERIENCE ********** ********** 1. What specific technical skills does your company possess which ensure capability to perform the tasks? Refer to the above REQUIRED CAPABILITIES section, and clearly identify the skills you have and describe how related to those capabilities. This includes identification of performance as you as a prime, and what you need to subcontract. ********** ********** 2. Describe your firm and experience (within the last 10 years) managing heavy marine/civil infrastructure projects exceeding $75M involving active navigation locks, underwater mass tremie grouting, or cofferdam dewatering. ********** ********** 3. Detail your capability to execute high-density mechanical/electrical equipment replacement within a rigid 120-day lock outage schedule. ********** ********** SECTION D - STATUTORY ENVIRONMENTAL PRODUCTS ********** ********** 1. Recovered Materials: Are commercial grout mixes, tremie concretes, and backfill materials containing EPA CPG recovered content (e.g., coal fly ash, ground granulated blast-furnace slag) readily available in the Chicago metropolitan market meeting USACE engineering standards? ********** ********** 2. BioPreferred Products: Can your firm source USDA BioPreferred certified biodegradable hydraulic fluids, gear lubricants, and form release agents that satisfy severe marine environmental operating criteria? ********** ********** 3. Long-Lead Items: Identify any long-lead equipment items (e.g., custom gearboxes, sluice gates, jib cranes) that could exceed 12 months fabrication time. ********** ********** SUBMISSION DETAILS (CAPABILITIES STATEMENT) ********** ********** Interested parties are requested to submit the capability requirements in Sections A thru D, within ten (10) pages in length, and a font of not less than 10 pitch. Please only include a narrative of the requested information; additional information will not be reviewed. ********** ********** The deadline for response to this request is no later than 2:00 PM, Central Time November 27, 2026. All responses under this Sources Sought Notice must be e-mailed to ericka.d.hillard@usace.army.mil and sara.t.king@usace.army.mil. Include in the subject line the title of this requirement. ********** ********** The Government will evaluate market information to ascertain potential market capacity to: ********** ********** 1. provide services consistent, in scope and scale, with those described in this notice and otherwise anticipated; and ********** ********** 2. secure and apply the full range of corporate financial, human capital, and technical resources required to successfully perform similar requirements. ********** ********** Your response to this Sources Sought, including any capabilities statement, shall be electronically submitted to the Contract Specialist, Ericka Hillard, and Contracting Officer, Sara King, in either Microsoft Word or Portable Document Format (PDF), via email to ericka.d.hillard@usace.army.mil and sara.t.king@usace.army.mil. ********** ********** All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government. No phone calls will be accepted. All questions must be submitted to the contract specialist and contracting officer identified above. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought. **********
72%
Market Research11/27/2026
This is a SOURCES SOUGHT SYNOPSIS and is not a solicitation announcement. The purpose of this Market Research and Sources Sought Notice is to gain knowledge of potential qualified Small Business, HUBZone, 8(a), Service Disabled Veteran owned, and Women owned Small Business firms. Responses to this Sources Sought Synopsis will be used by the government in making appropriate acquisition decisions. The intended work falls under NAICS code 237990, Other Heavy and Civil Engineering Construction. The U.S. Army Corps of Engineers, Mobile District, anticipates a requirement for a firm-fixed-price construction contract to perform structural concrete and gate repairs on the spillway at the Carters Reregulation Dam located in Chatsworth, Georgia. The purpose of this project is to perform concrete rehabilitation and retrofit existing structural elements that have been impacted by concrete expansion due to Alkali-Silica Reactivity (ASR). The scope of work includes, but is not limited to: structural concrete demolition of existing pier stoplog slots; installation of new steel stoplog guides and embedded seal plates; placement of specialized shrinkage-compensating concrete; and recessing of side seal plates. Additional mechanical and structural work includes replacing side and bottom seals on four (4) Tainter gates and replacing seals on eight (8) stop logs. The contractor will be fully responsible for the design, fabrication, and installation of Temporary Dewatering Structures (TDS)/cofferdams and temporary gate support shoring. To maintain operational continuity, construction must be executed sequentially, allowing only one gate bay to be dewatered and out of service at any given time. The estimated magnitude of construction is between $5,000,000 and $10,000,000, with an anticipated performance period of approximately 180 calendar days. Responses are requested with the following information, which shall not exceed a total of eight pages. 1. Offeror name, address, points of contact with telephone numbers and e-mail addresses. 2. Business size/classification to include any designations as Small Business, 8(a), HUBZone, Service Disabled Veteran Owned and Women-Owned Small Businesses shall be indicated on first page of submission. 3. Bonding capability: construction bonding level per single contract and aggregate construction bonding level, both expressed in dollars; along with current available bonding capacity. 4. Description of your capability to perform the specialized work described above, manage subcontractors, secure and comply with environmental permits, and safely execute Dam and hydraulic Steel structures (HSS) construction. Specifically address your capacity and proposed approach to designing, fabricating, and installing Temporary Dewatering Structures (TDS) and tainter gate shoring systems. 5. Past performance and experience on up to three (3) projects of similar scope, complexity, and value completed within the past five (5) years, or at least 50% construction complete. Relevant experience includes: structural concrete demolition, specialized concrete placement (such as shrinkage-compensating concrete under strict curing/testing protocols), stainless steel structural embed/guide fabrication and welding, Tainter gate seal replacement, and work with USACE Hydraulic Steel Structures within the civil works branch. For each project, provide the title, location, general description of the scope, contract value, role (Prime or Subcontractor), and client contact information (name, phone, and email). NO RESPONSES WILL BE ACCEPTED BY FAX OR MAIL. ALL RESPONSES MUST BE E-MAILED to: Jeffrey M. Donaldson at Jeffrey.M.Donaldson@usace.army.mil. Submittals are due no later than 20 October 2026 at 2:00 PM CDT. Telephonic responses will not be honored. This is not a Request for Proposal, only a Request for Information. No award will result from this Sources Sought. This notice does not constitute any commitment by the Government.
68%
Market Research10/20/2026
Dashields Locks and Dam Install 4 Corner Hydraulics Dashields Locks and Dam, Coraopolis, PennsylvaniaThe Dashields hydraulic system upgrade consists of demolition and removal of the existing hydraulic system and its related components, and installation of a new hydraulic system with supporting controls and buildings.Primary hydraulic system components to be demolished and removed are motors, pumps, reservoir, filters, filter housings, piping and pipe hangers, hydraulic fluid, valves, and manifolds. Any hydraulic piping that is embedded in concrete must be drained, cut flush with the concrete surface, capped or plugged, and abandoned in place. Nine (9) new hydraulic cylinders must be furnished by the contractor and five (5) will be furnished by the government. Electrical demolition work must include but not be limited to removal of specified buckets, cabinet doors, junction boxes, levers, buttons, indicators, limit switches, wiring, and hardware. Some concrete demolition work must be required for placement of new buildings and routing of new electrical cable and mechanical pipe.Three (3) new hydraulic power units (HPUs) must be furnished and installed on the land and middle lock walls inside two new 2-story HPU buildings at locations specified on the contract drawings. The fourth HPU will be furnished and installed on an elevated platform in the river wall at the location specified in the contract drawings. The HPU buildings and elevated platform must be designed and constructed by the contractor in accordance with the performance specification and the concept drawings included in the contract drawings. The HPUs must send hydraulic power to the existing hydraulic cylinders by means of new stainless-steel piping and new manifold mounted hydraulic components.The new hydraulic equipment must be operated by new electronic controls that will be installed inside new panels and new control consoles. The new control panels must be installed on each HPU with an additional control panel inside of the middle wall operations building. The new control consoles must be installed inside three existing and one new 1-story control shelter at locations specified in the contract drawings. The control shelter must be designed and constructed by the contractor in accordance with the performance specification and the concept drawings included in the contractdrawings.New buckets and supporting equipment must be installed inside existing motor control centers (MCCs). New hardware and power and control cabling must be installed as specified and as required for operation of the new electrical/mechanical equipment. Some concrete installation work must be required for placement of new buildings and routing of new electrical cable and mechanical pipe. A geotechnical and civil site analysis must be completed to confirm the structural integrity of all foundations for all new project components and to confirm proper drainage. Minimal new steel grating must be required for placement over top new concrete utility trenches. All new hydraulic and controls equipment must be tested and commissioned prior to project handoff. This project is to be completed at a locks and dam site along the Ohio River and thus requires the use of a floating work plant and work boat(s) for construction. Also, all as-built drawings must be stamped by a registered PE.The work shall be completed within 730 after written Notice to Proceed.The acquisition will be procured as 100% Set-Aside for Small Business. The resulting award will be for one (1) Firm-Fixed-Price (FFP) Contract. All responsible Offerors are encouraged to participate. The Request for Proposal (RFP) will be issued on or about 18 June 2026, online through Procurement Integrated Enterprise Environment (PIEE) which posts the opportunity to SAM.gov; therefore, requests for hardcopies of the solicitation will not be honored.The North American Industrial Classification System (NAICS) Code for this acquisition is 237990 - 0ther Heavy and Civil Engineering Construction.The Small Business Size Standard for this NAICS Code is $45,000,000.00.In order to submit an Offer on this project, your company must-1) Be registered in System for Award Management (SAM) and maintain an active registration status. 2) Be registered in the Procurement Integrated Enterprise Environment (PIEE) for the Solicitation Module with the PROPOSAL MANAGER Manger role. System for Award Management (SAM) RegistrationRegistering in SAM.gov includes both entity validation and entity registration.To register in SAM:a. Navigate to SAM.govb. Select Sign-In (top right)c. Select Create an Account then Follow the Instructions. d. After Account is Set-up, Select Sign In.e. Under the Entity Management widget, Select Get Started button. f. Select Register Entity. As part of entity registration, a Unique Entity ID will be assigned.For Additional Information on SAMTo Register Your Entity (company), please visit https:/www.fsd.gov/gsafsd_sp?id=gsa_index . Here you will find the following, Get Started with Your Registration Check Registration Status ACTIVE, INACTIVE, PENDING Update Your Registration Become an Entity Administrator Validate Your Entity *Access User Guides *By selecting this option, you can obtain a Quick Start Guide for Contract Registrations.Also, here you will find in addition to the User Guides - FAQs, Videos, and Definitions.PLEASE NOTEIt is mandatory that all companies be registered in SAM in order to receive federal contracts.There is no charge to register or maintain your company (entity) registration.Login.gov manages usernames and passwords for SAM.gov. *Important* Registration InformationRegistration can take at least ten (10) business days to be active in SAM.gov.Registration must be in active status upon offer submission and remain active during award period.Registration must be renewed every 365 days to remain active.The Federal Service Desk (FSD) for SAM questions, may be contacted. Phone Number: 866-606-8220Hours of Operation: Monday-Friday 8 a.m. to 8 p.m. ETProcurement Integrated Enterprise Environment (PIEE) Solicitation Module RegistrationTo register for PIEE follow the below instructions. Register in PIEE:a. Navigate to https://piee.eb.mil/b. Select Register [top right]c. Select Vendord. Create a User ID and Password and follow the prompts [next]e. Create Security Questions [next]f. Complete your User Profile Information [next]g. Complete your Supervisor or Approving Official Information [next]h. Complete Rolesi. Step 1. Select SOL-Solicitationii. Step 2. Select Proposal Manageriii. Step 3. Click Add Rolesiv. Step 4. Fill in your Location Code (CAGE Code) [next]i. Provide a justification for your registration [next]j. Follow the remaining prompts to submit your registrationThe Procurement Integrated Enterprise Environment (PIEE) help desk may be reached by calling telephone number 866-618-5988 for assistance. 30 June 2026 - Amendment 0001 issued. 23 July 2026 - Amendment 0002 Issued 31 July 2026 - Amendment 0003 issued. 13 August 2026 - Amendment 0004 issued.
68%
Solicitation08/20/2026
Dashields Locks and Dam Install 4 Corner Hydraulics Dashields Locks and Dam, Coraopolis, PennsylvaniaThe Dashields hydraulic system upgrade consists of demolition and removal of the existing hydraulic system and its related components, and installation of a new hydraulic system with supporting controls and buildings.Primary hydraulic system components to be demolished and removed are motors, pumps, reservoir, filters, filter housings, piping and pipe hangers, hydraulic fluid, valves, and manifolds. Any hydraulic piping that is embedded in concrete must be drained, cut flush with the concrete surface, capped or plugged, and abandoned in place. Nine (9) new hydraulic cylinders must be furnished by the contractor and five (5) will be furnished by the government. Electrical demolition work must include but not be limited to removal of specified buckets, cabinet doors, junction boxes, levers, buttons, indicators, limit switches, wiring, and hardware. Some concrete demolition work must be required for placement of new buildings and routing of new electrical cable and mechanical pipe.Three (3) new hydraulic power units (HPUs) must be furnished and installed on the land and middle lock walls inside two new 2-story HPU buildings at locations specified on the contract drawings. The fourth HPU will be furnished and installed on an elevated platform in the river wall at the location specified in the contract drawings. The HPU buildings and elevated platform must be designed and constructed by the contractor in accordance with the performance specification and the concept drawings included in the contract drawings. The HPUs must send hydraulic power to the existing hydraulic cylinders by means of new stainless-steel piping and new manifold mounted hydraulic components.The new hydraulic equipment must be operated by new electronic controls that will be installed inside new panels and new control consoles. The new control panels must be installed on each HPU with an additional control panel inside of the middle wall operations building. The new control consoles must be installed inside three existing and one new 1-story control shelter at locations specified in the contract drawings. The control shelter must be designed and constructed by the contractor in accordance with the performance specification and the concept drawings included in the contractdrawings.New buckets and supporting equipment must be installed inside existing motor control centers (MCCs). New hardware and power and control cabling must be installed as specified and as required for operation of the new electrical/mechanical equipment. Some concrete installation work must be required for placement of new buildings and routing of new electrical cable and mechanical pipe. A geotechnical and civil site analysis must be completed to confirm the structural integrity of all foundations for all new project components and to confirm proper drainage. Minimal new steel grating must be required for placement over top new concrete utility trenches. All new hydraulic and controls equipment must be tested and commissioned prior to project handoff. This project is to be completed at a locks and dam site along the Ohio River and thus requires the use of a floating work plant and work boat(s) for construction. Also, all as-built drawings must be stamped by a registered PE.The work shall be completed within 730 after written Notice to Proceed.The acquisition will be procured as 100% Set-Aside for Small Business. The resulting award will be for one (1) Firm-Fixed-Price (FFP) Contract. All responsible Offerors are encouraged to participate. The Request for Proposal (RFP) will be issued on or about 18 June 2026, online through Procurement Integrated Enterprise Environment (PIEE) which posts the opportunity to SAM.gov; therefore, requests for hardcopies of the solicitation will not be honored.The North American Industrial Classification System (NAICS) Code for this acquisition is 237990 - 0ther Heavy and Civil Engineering Construction.The Small Business Size Standard for this NAICS Code is $45,000,000.00.In order to submit an Offer on this project, your company must-1) Be registered in System for Award Management (SAM) and maintain an active registration status. 2) Be registered in the Procurement Integrated Enterprise Environment (PIEE) for the Solicitation Module with the PROPOSAL MANAGER Manger role. System for Award Management (SAM) RegistrationRegistering in SAM.gov includes both entity validation and entity registration.To register in SAM:a. Navigate to SAM.govb. Select Sign-In (top right)c. Select Create an Account then Follow the Instructions. d. After Account is Set-up, Select Sign In.e. Under the Entity Management widget, Select ?Get Started? button. f. Select Register Entity. As part of entity registration, a Unique Entity ID will be assigned.For Additional Information on SAMTo Register Your Entity (company), please visit https:/www.fsd.gov/gsafsd_sp?id=gsa_index . Here you will find the following, Get Started with Your Registration Check Registration Status ? ACTIVE, INACTIVE, PENDING Update Your Registration Become an Entity Administrator Validate Your Entity *Access User Guides *By selecting this option, you can obtain a Quick Start Guide for Contract Registrations.Also, here you will find in addition to the User Guides - FAQs, Videos, and Definitions.PLEASE NOTEIt is mandatory that all companies be registered in SAM in order to receive federal contracts.There is no charge to register or maintain your company (entity) registration.Login.gov manages usernames and passwords for SAM.gov. *Important* Registration InformationRegistration can take at least ten (10) business days to be active in SAM.gov.Registration must be in active status upon offer submission and remain active during award period.Registration must be renewed every 365 days to remain active.The Federal Service Desk (FSD) for SAM questions, may be contacted. Phone Number: 866-606-8220Hours of Operation: Monday-Friday 8 a.m. to 8 p.m. ETProcurement Integrated Enterprise Environment (PIEE) Solicitation Module RegistrationTo register for PIEE follow the below instructions. Register in PIEE:a. Navigate to https://piee.eb.mil/b. Select Register [top right]c. Select Vendord. Create a User ID and Password and follow the prompts [next]e. Create Security Questions [next]f. Complete your User Profile Information [next]g. Complete your Supervisor or Approving Official Information [next]h. Complete Rolesi. Step 1. Select SOL-Solicitationii. Step 2. Select Proposal Manageriii. Step 3. Click Add Rolesiv. Step 4. Fill in your Location Code (CAGE Code) [next]i. Provide a justification for your registration [next]j. Follow the remaining prompts to submit your registrationThe Procurement Integrated Enterprise Environment (PIEE) help desk may be reached by calling telephone number 866-618-5988 for assistance.
68%
Pre-Solicitation06/18/2026

Additional Details

Solicitation Number

140L0622R0003

Archive Date

Feb 17, 2022

Office Address

DENVER, CO, 80225