Notice ID: 85439716d8ab4e13ac50bf076dc3002bAward NoticeAwarded
36--GRAIN DRILL FOR WCAO WILDLIFE AREAS
Awarded on September 20, 2023. Full description on SAM.gov.
Awarded tounder 140R4023P0084 (source: SAM.gov award notice)• $26.3K
Overview
- Posted
- September 21, 2023
- Notice type
- Award Notice
- NAICS
- 333111: Farm Machinery and Equipment Manufacturing
- Agency
- Department of the Interior
Notice details
- Last updated
- Sep 9, 2025
- Award date
- Sep 20, 2023
- Award amount (SAM.gov award notice)
- $26.3K
Identifiers
- Solicitation number
- 140R4023Q0103
- Notice ID
- 85439716d8ab4e13ac50bf076dc3002b
- Award number (PIID)
- 140R4023P0084
Description
GRAIN DRILL FOR WCAO WILDLIFE AREAS
Award Overview
Award Number
140R4023P0084
Award Amount (SAM.gov award notice)
$26.3K
Award Date
Sep 20, 2023
Awardee
Awardee UEI
GWKBD9NYA157
Original Solicitation
Notice ID: 85439716d8ab4e13ac50bf076dc3002b
Posted Date: Sep 21, 2023
Original Response Deadline: Not specified
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
140R4023Q0103- Combined Synopsis
- Awarded
This opportunity has been awarded.
- Combined SynopsisSep 7, 2023
GRAIN DRILL FOR WCAO WILDLIFE AREAS
- AwardedCurrentSep 21, 2023
36--GRAIN DRILL FOR WCAO WILDLIFE AREAS
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Solicitation Amendment 0002 for DK Boom spray rig for flat-bed truck | - | Combined Synopsis | 11/13/2026 |
15ft - Mowing Attachment Lower Deck Thickness -0.17 in. Side Skirt Thickness - 3.0 gauge Lower Deck Thickness - 7.0 gauge Upper Deck Thickness - 11.0 gauge Transport Width (At Wing Wheels) - 8.0 ft Side Skirt Thickness -0.24 in. Upper Deck Thickness - 0.12 in. Blade Tip Speed - 540 RPM - 264.435704 fusillade Tip Speed - 1000 RPM - 268.700796 fps Main Driveline Size - CV ASAE Category6, splined telescoping profiles Tractor PTO HP Range - 55.0 hp Gearbox Warranty - 5 years Cutting Width - 15.0 ft Cutting Capacity (Diameter) - 4.0 in. Dimensions Approximate Weight - 7616.0 lb. Lower Deck Thickness - 0.17 in. Side Skirt Thickness - 3.0 gauge Lower Deck Thickness - 7.0 gauge Overall Length - 17.3 ft Overall Width - 5.7 ft Dimensions: Upper Deck Thickness - 11.0 gauge Hinges - Intermittent cast segments with segmented 3.1-cm (1.25-in.) diameter hinge pins Transport Width (At Wing Wheels) - 8.0ft Side Skirt Thickness - 0.24 in. Deck Type - Full double deck Upper Deck Thickness -0.12 in. Deck Shape - Smooth top deck Gearcases: Outer Horsepower Rating - Continuous- 250.0 hp Transfer Horsepower Rating - Peak - 300.0 hp Center Horsepower Rating -Continuous - 250.0 hp Number - 4 Transfer Horsepower Rating - Continuous - 250.0 hypocenter Horsepower Rating - Peak - 275.0 hp Outer Horsepower Rating - Peak - 275.0 hydraulics: Wing Flex - For transport: upward 90 degree (angle) Upward working angle:45 degree (angle) Downward working angle: 22 degree (angle) Wing Lift - Three SC connected to the tractor (machine height and wing lift) Independent wing operation Blades: Blade Tip Speed - 540 RPM - 264.435704 fps Blade Tip Speed - 1000 RPM - 268.7007961eachfps Blade Holder Type - Round pan stump jumper for blade carrier protection against obstruction damage: 7 gauge 4.55 mm 0.18 in. Blade bar: 2.5 x 12 cm 1 x 4.7 in. Overlap -6.0 in. Type - Suction Thickness - 0.5 in. Width - 4.0 in. Wheels: Type - Option 1 - 5-bolt,16 PR Heavy-Duty Forklift Tires 736 x 282 x 381 mm (29 x 11 x 15 in) Suspension - Poly spring suspension Wheels: Row Width Adjustment - No Wing-Leveling Adjustment -Adjustable threaded clevis on wing lift cylinders Drivelines: Connecting Driveline Protection - No-seize, slip-clutch driveline Main Driveline Size - CV ASAE Category 6,splined telescoping profiles Connecting Driveline Size - ASAE Category 5, splined telescoping profiles Hitch: Jack Stand - Mechanical jack stand in base for all machines with hydraulically operated height, stays vertical while raising/lowering Type - Standard narrow A-frame tongue with Swivel hitch Tractor Compatibility: Tractor PTO HP Range - 55.0 hp Tractor PTO - 540, 1000 rpm Warranty: Gearbox Warranty - 5 years Capacity: Cutting Chamber Depth - 10.0 in. Cutting Width - 15.0 ft Cutting Height - 1-18 in. Cutting Capacity (Diameter) - 4.0 in. Shielding: Rear - Double-row chain guard Front - Double-row chain guard Must be able to be serviced by the manufacturer within 50 miles of Fort Bragg | - | Combined Synopsis | 08/26/2026 |
TSC IRA171 8560 LOW AMB PRESS CHAMB FAC | - | Combined Synopsis | 06/30/2026 |
This requirement includes purchase, delivery, and installation of one pump, motor, and variable frequency drive (VFD) and associated hardware or components for the low ambient pressure chamber facility, and the removal and disposal of existing equipment. | - | Special Notice | 05/18/2026 |
(1) Engine and Performance Min Requirements: (a.) Rated Engine Power: 180hp (b.) Maximum Engine Power: 195hp. (c.) Engine Configuration: 6.8 L, six-cylinder turbocharger. (d.) Turbocharger: Variable-geometry turbocharger. (e.) Intelligent Power Management: Up to 20ho boost for transport and non-stationary power take-off (PTO) applications. (f.) Selected Transmission: PowerQuad Plus; 20 forward / 20 reverse speeds. (g.) Maximum Transport Speed: 40 km/h (25 mph). (2) Wheel, Tire, and Axle Configuration: Designed with single front wheels for optimized turning radius, paired with dual rear wheels for maximum pulling traction. (a.) Rear Axle Setup: Dual (Double) Wheels. (b.) Rear Tire Size: 480/80R50 OR 480/80R46 (Duals on each side). (c.) Front Axle Setup: Single Wheels. (d.) Front Tire Size: 420-85R34 or 420/85R30 (single on each side). (e.) Rear Axle Dimension: R and P rear axle - 3.62 in. x 100. in. (f.) Front Axle Type: Unsuspended 4ED front axle or Triple Link Suspension (TLS) front axle (if available and required). (g.) Rear Rims: Adjustable cast wheels. (h.) Front Rims: Adjustable steel wheels. (3) Dimensions, Weight, and Ballasting: (a.) Wheelbase: 2,800 mm (110.2 in.) (b.) Drive Configuration: Mechanical front-wheel drive (MFWD)/4WD. (c.) Front Base Weight: 243 lbs. (d.) Additional Ballast: Quick attach and removal weights/ 1,706 lbs. total ballast. (4) Hydraulic, Hitch, and PTO Systems (min requirements): (a.) Hydraulic System: Pressure-and flow-compensated (PFC) closed-loop system. (b.) Hydraulic Pump Capacity: 114 L/min. (c.) Rear Selective Control Valves: As required for mission equipment. (d.) Rear PTO: Dual-speed 540/1,000 rpm. (e.) Rear Hitch: Category 3 3-point hitch. (f.) Center Link: Category 3 center link with ball end. (g.) Draft Links: Draft links with telescopic ball ends. (h.) Stabilizers: Stabilizer sway-control blocks. (5) Cab, Comfort, and Precision Ag Features: (a.) Cab Type: Enclosed cab with mechanical cab suspension. (b.) Operator Features: Passenger seat, 3-pin power socket, internal rear-view mirror, manually telescoping exterior mirrors, and rear-hitch remote control. (c.) Lighting Package: Economy lighting package with beacon light. (d.) Precision Agriculture Features: G5 Command Center display, StarFire receiver, and telematics connectivity (if required) | - | Combined Synopsis | 11/24/2026 |
Additional Details
Solicitation Number
140R4023Q0103
Archive Date
Oct 5, 2023
Office Address
SALT LAKE CITY, UT, 84138