GovChime
Notice ID: 1535149bf09a4e82be87b4afc810fc1bSolicitation

CNC Horizontal Machining Center

Responses closed . Full description on SAM.gov.

Overview

Response deadline
11:00 AM CDT
Posted
March 26, 2026
Notice type
Solicitation
NAICS
333517: Machine Tool Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.ACC-CTRS.ACC-DTA.W6QK ACC ANAD
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W911KF26QA029
Notice ID
1535149bf09a4e82be87b4afc810fc1b

Description

CNC Horizontal Machining Center

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Lifecycle

  1. 1
    Version 1Solicitation

    CNC Horizontal Machining Center

    Notice e55aded9c81b4ec69da40f4f34462b83 on SAM.gov

  2. 2
    Version 2SolicitationCurrent

    CNC Horizontal Machining Center

    Notice 1535149bf09a4e82be87b4afc810fc1b on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The government has a requirement for the procurement and install for one (1) each computer numerical controlled (CNC) turn-mill multitasking machine, one (1) each medium computer numerical controlled (CNC) horizontal lathe, and three (3) each small computer numerical controlled (CNC) horizontal lathes in accordance with the Statement of Work for each machine. The machines will be utilized in the repair, remanufacture, overhaul, and manufacture of combat vehicles and weapon systems at the Anniston Army Depot (ANAD). This procurement is a full and open competition. The applicable North American Industry Classification System Code is 333517. All responses for the solicitation must be submitted in digitized/electronic format. Paper copy responses shall not be accepted. Any clauses or provisions of the solicitation which mention writing, returning, or submission of offer will mean electronic submission. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Responses sent by email will not be accepted. Instructions for Posting Offer can be found under the Solicitation Module Documentation-Training and Resources. It is the responsibility of the offeror to confirm receipt and ensure its offer, in its entirety, reaches the Army Contracting Command-Detroit, Anniston Army Depot (ANAD), before the time set for closing of the solicitation. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the Internet: http://www.sam.gov. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a bidder?s mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal non-responsive and result in the rejection of your proposal. The solicitation will close Wednesday, 17 June 2026 at 10:00 AM CST. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE). POINT OF CONTACT: Crystal Hodges, 571-588-0965, crystal.l.hodges8.civ@army.mil.
-AwardedOpen
he government has a requirement for the procurement and install for one (1) each computer numerical controlled (CNC) turn-mill multitasking machine, one (1) each medium computer numerical controlled (CNC) horizontal lathe, and three (3) each small computer numerical controlled (CNC) horizontal lathes in accordance with the Statement of Work for each machine. The machines will be utilized in the repair, remanufacture, overhaul, and manufacture of combat vehicles and weapon systems at the Anniston Army Depot (ANAD). This procurement is a full and open competition. The applicable North American Industry Classification System Code is 333517. All responses for the solicitation must be submitted in digitized/electronic format. Paper copy responses shall not be accepted. Any clauses or provisions of the solicitation which mention writing, returning, or submission of offer will mean electronic submission. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Responses sent by email will not be accepted. Instructions for Posting Offer can be found under the Solicitation Module Documentation-Training and Resources. It is the responsibility of the offeror to confirm receipt and ensure its offer, in its entirety, reaches the Army Contracting Command-Detroit, Anniston Army Depot (ANAD), before the time set for closing of the solicitation. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the Internet: http://www.sam.gov. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a bidder?s mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal non-responsive and result in the rejection of your proposal. The solicitation will close Wednesday, 17 June 2026 at 10:00 AM CST. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE). POINT OF CONTACT: Crystal Hodges, 571-588-0965, crystal.l.hodges8.civ@army.mil.
-AwardedOpen
CNC Vertical Grinder Machine
-Solicitation06/18/2026
**Amendment 0003 posted to extend due to 17 June 2026 at 10:00 AM CST and provide revised Statements of Work.** The government has a requirement for the procurement and install for one (1) each computer numerical controlled (CNC) turn-mill multitasking machine, one (1) each medium computer numerical controlled (CNC) horizontal lathe, and three (3) each small computer numerical controlled (CNC) horizontal lathes in accordance with the Statement of Work for each machine. The machines will be utilized in the repair, remanufacture, overhaul, and manufacture of combat vehicles and weapon systems at the Anniston Army Depot (ANAD). This procurement is a full and open competition. The applicable North American Industry Classification System Code is 333517. All responses for the solicitation must be submitted in digitized/electronic format. Paper copy responses shall not be accepted. Any clauses or provisions of the solicitation which mention writing, returning, or submission of offer will mean electronic submission. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Responses sent by email will not be accepted. Instructions for Posting Offer can be found under the Solicitation Module Documentation-Training and Resources. It is the responsibility of the offeror to confirm receipt and ensure its offer, in its entirety, reaches the Army Contracting Command-Detroit, Anniston Army Depot (ANAD), before the time set for closing of the solicitation. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the Internet: http://www.sam.gov. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a bidder?s mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal non-responsive and result in the rejection of your proposal. The solicitation will close Wednesday, 17 June 2026 at 10:00 AM CST. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE). POINT OF CONTACT: Crystal Hodges, 571-588-0965, crystal.l.hodges8.civ@army.mil.
-Solicitation06/17/2026
This notice is not a request for proposals; it is a pre-solicitation announcement only. The government has a requirement for the procurement and install for one (1) each computer numerical controlled (CNC) turn-mill multitasking machine, one (1) each medium computer numerical controlled (CNC) horizontal lathe, and three (3) each small computer numerical controlled (CNC) horizontal lathes in accordance with the Statement of Work for each machine. The machines will be utilized in the repair, remanufacture, overhaul, and manufacture of combat vehicles and weapon systems at the Anniston Army Depot (ANAD). This procurement will be full and open competition. The applicable North American Industry Classification System Code is 333517. All responses for the solicitation must be submitted in digitized/electronic format. Paper copy responses shall not be accepted. Any clauses or provisions of the solicitation which mention writing, returning, or submission of offer will mean electronic submission. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Responses sent by email will not be accepted. Instructions for Posting Offer can be found under the Solicitation Module Documentation-Training and Resources. It is the responsibility of the offeror to confirm receipt and ensure its offer, in its entirety, reaches the Army Contracting Command-Detroit, Anniston Army Depot (ANAD), before the time set for closing of the solicitation. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the Internet: http://www.sam.gov. The estimated issue date is 18 March 2026. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a bidder?s mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal non-responsive and result in the rejection of your proposal. POINT OF CONTACT: Crystal Hodges, 256-235-6231, crystal.l.hodges8.civ@army.mil.
-Pre-SolicitationOpen

Additional Details

Solicitation Number

W911KF26QA029

Archive Date

Mar 26, 2027

Office Address

ANNISTON, AL, 36201-4199