GovChime
Notice ID: d786b6c70a8f416dae893e6d97e32aedCombined Synopsis/Solicitation

REPLACEMENT OF FOUR (4) INDUSTRIAL WASHING MACHINES

Responses closed . Full description on SAM.gov.

Overview

Response deadline
4:00 PM EDT
Posted
June 22, 2021
Notice type
Combined Synopsis/Solicitation
NAICS
333318: Classification Not Available
Agency
Department of JusticeFEDERAL PRISON SYSTEM / BUREAU OF PRISONS

Notice details

Office
FCI EDGEFIELD
Place of performance
Edgefield, 29824
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
15B30321FW4Z10001
Notice ID
d786b6c70a8f416dae893e6d97e32aed

Description

The Federal Bureau of Prisons, Federal Correctional Institution, Edgefield, South Carolina intends to award a government order to the vendor/contractor who can provide the most cost effective means in obtaining two industrial washing machines for the Laundry Department. These washing machines-extractors will be used for washing of inmate uniforms. The washing machines need to be able to withstand heavy loads. The washing performance needs to maximize output to meet the daily workload. These washers need to be capable of increasing energy efficiency and reduce washing times to help on-premises laundries increase the output, while decreasing operating costs. The capacity of three of the washing machines/extractors must meet that which is 140 lbs. The washing machines/extractors must be equipped with a programmable control. The dimensions must fall within overall width- no more than 53 inches; overall depth - no more than 76 inches; and overall height - no more than 70 inches. As for the cylinder, the cylinder diameter must not be larger than 42 inches. The cylinder depth must not be more than 26 inches and the cylinder volume must not be more than 21 cubic feet. The door must have an observation window. The motor should be of the horsepower to run the washer. Must drain to rear, single motor inverter drive. When offering your proposal, please include all details regarding the product you are offering to include installation costs and any information on warranties. (See attached Request for Quotation). The capacity of one of the washing machines/extractors must meet that which is 60 lbs. The washing machine/extractor must be equipped with a programmable control. The dimensions must fall within overall width- no more than 35 inches; overall depth - no more than 56 inches; and overall height - no more than 57 inches. As for the cylinder, the cylinder diameter must not be larger than 42 inches. The cylinder depth must not be more than 22 inches and the cylinder volume must not be more than 9 cubic feet inches. The door must have an observation window. The motor should be of the horsepower to run the washer. Must drain to rear, single motor inverter drive. When offering your proposal, please include all details regarding the product you are offering to include installation costs and any information on warranties. (See attached Request for Quotation). Deliveries will be made to the Federal Correctional Institution, 501 Gary Hill Road, Edgefield, South Carolina 29824. The contract type is a firm-fixed price. The contracting official intends to make this award on an all or none basis. The Government will award to the responsible quoter whose offer, conforming to the solicitation, is considered to be most advantageous to the Government, with price considered equally. All responsible business concerns are encouraged to submit a quotation which may be considered. The solicitation will be made available on or about June 22, 2021, and will be posted here to the beta.SAM.gov website: http://beta.sam.gov/. The site provides downloading instructions. All future information about this acquisition, including solicitation amendments, and award information will be distributed solely through this site. Interested parties are responsible for monitoring this site to ensure they have the most up-to-date information about this solicitation. Quotes will be due Friday, June 25, 2021 by 4:00 pm EST. The Government reserves the right to make payment using Electronic Funds Transfer (EFT). Quoters should include their Data Universal Numbering System (DUNS) number in their offers. The Contracting Officer will verify registration in the System for Award Management (SAMS) database prior to award by entering the potential awardees’ DUNS number into the SAMS database. Failure to complete this registration procedure outlined in this solicitation, may result in elimination from consideration for award. You should check to see if your registration is still valid and has not expired. If it has expired, you need to update it to where it shows active again or this could be grounds for elimination from consideration for award. The point of contact for all information regarding this solicitation is Dana Johnson, Supervisory Contract Specialist, at 803-637-1340. Completed offers must be e-mailed to dcrews@bop.gov@bop.gov. The anticipated award date is June 28, 2021.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

DANA JOHNSON
Fax: 8036377161

Documents

Files (1)

  • RFQ - INDUSTRIAL WASHING MACHINES.pdf

    1.5 MBAdded in Combined Synopsis/Solicitation version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Combined Synopsis/SolicitationCurrent

    REPLACEMENT OF FOUR (4) INDUSTRIAL WASHING MACHINES

    Notice d786b6c70a8f416dae893e6d97e32aed on SAM.gov

  2. 2
    Version 2Award Notice

    Type changed from Combined Synopsis/Solicitation to Award Notice

    REPLACEMENT OF FOUR (4) INDUSTRIAL WASHING MACHINES

    Notice 392beb7ad5fe4779a105548f076be6df on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
ITEMS # 1 THROUGH 3 AWARDED ON A ALL OR NONE BASIS.
-AwardedOpen
LINE ITEMS #0001 THROUGH 0005 AWARDED ON A ALL OR NONE BASIS.
-AwardedOpen
The Federal Bureau of Prisons, Federal Correctional Institution, Edgefield, South Carolina intends to award a government order to the vendor/contractor who can provide the most cost effective means in obtaining two industrial natural gas dryers for the Laundry Department. These dryers will be used for drying of inmate uniforms. The dryer needs to be able to withstand high heat and heavy loads. The drying performance needs to maximize output to meet the daily workload. These dryers need to be equipped with high-performance heater boxes to increase energy efficiency and reduce drying times to help on-premises laundries increase the output, while decreasing operating costs. The capacity of the dryers must meet that which is 170 lbs. The dryers must be equipped with dual digital control. The dimensions must fall within overall width- no more than 52.9 inches; overall depth - no more than 69.8 inches; and overall height - no more than 94 inches. As for the cylinder, the cylinder diameter must not be larger than 50.8 inches. The cylinder depth must not be more than 42.5 inches and the cylinder volume must not be more than 4.8 inches. Must have gas connection. The door must have an observation window. Must have an automatic back draft damper and a self-cleaning lint screen. When offering your proposal, please include all details regarding the product you are offering to include installation costs and any information on warranties. (See attached Request for Quotation). Deliveries will be made to the Federal Correctional Institution, 501 Gary Hill Road, Edgefield, South Carolina 29824. The contract type is a firm-fixed price. The contracting official intends to make this award on an all or none basis. The Government will award to the responsible quoter whose offer, conforming to the solicitation, is considered to be most advantageous to the Government, with price considered equally. All responsible business concerns are encouraged to submit a quotation which may be considered. The solicitation will be made available on or about June 22, 2021, and will be posted here to the beta.SAM.gov website: http://beta.sam.gov/. The site provides downloading instructions. All future information about this acquisition, including solicitation amendments, and award information will be distributed solely through this site. Interested parties are responsible for monitoring this site to ensure they have the most up-to-date information about this solicitation. Quotes will be due Friday, June 25, 2021 by 4:00 pm EST. The Government reserves the right to make payment using Electronic Funds Transfer (EFT). Quoters should include their Data Universal Numbering System (DUNS) number in their offers. The Contracting Officer will verify registration in the System for Award Management (SAMS) database prior to award by entering the potential awardees’ DUNS number into the SAMS database. Failure to complete this registration procedure outlined in this solicitation, may result in elimination from consideration for award. You should check to see if your registration is still valid and has not expired. If it has expired, you need to update it to where it shows active again or this could be grounds for elimination from consideration for award. The point of contact for all information regarding this solicitation is Dana Johnson, Supervisory Contract Specialist, at 803-637-1340. Completed offers must be e-mailed to dcrews@bop.gov@bop.gov. The anticipated award date is June 28, 2021.
-Combined Synopsis06/25/2021
Items: 2 VRTEX360+ Duel User The Federal Bureau of Prisons, Federal Correctional Institution, Edgefield, South Carolina intends to negotiate on a sole source basis under the authority of FAR Part 6.302-1 with Lincoln Electric, St. Claire Ave Cleveland, OH 44117-25214. This is a combined synopsis/solicitation for commercial items prepared in accordance with FAR Subpart 13.5 and the format in FAR 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. The solicitation is being issued as Request for Quotation (RFQ) 3030322FG 90F. THe Government anticipates awarding this requirement as a Firm Fixed Price contract. The solicitation document and incorporated clauses and provisions are those in effect through Federal Acquisition Circular 2021-06. The North American Industry Classification System code is 238990 with a smal business size standard of $14 million. The requirement at FCI Edgefield is for a Welding Simulator with specific modifications that are only done by said vendor to include manufacturing and installing vents. The vendor will agree to adhere to all regulations and policies prescribed by FCI Edgefield and the Bureau of Prison during and after installation. The Lincoln Welding Simulator 360 has received FITARA approval.
-Solicitation08/31/2021
line item #002 Removable Welding table with 4 legs $565 each line item #003 welding Booth $1680.00 each line item #004 Removable Welding table with 4 legs $565 each line item #005 2 HP Wall Mounted Fume Extractors with Filter & duel Arms $3,895.00
-AwardedOpen

Additional Details

Solicitation Number

15B30321FW4Z10001

Archive Date

Dec 31, 2031

Office Address

EDGEFIELD, SC, 29824