Notice ID: bcdb3273b6b24a8eaff1bedb2b361224Special Notice
Job Corps Architect/Engineer MATOC
Archived. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 2:00 PM UTC−05:00
- Posted
- December 5, 2022
- Notice type
- Special Notice
- Set-aside
- Small Business Set Aside - Total
- NAICS
- 541330: Engineering Services
- Agency
- Department of LaborOFFICE OF THE ASSISTANT SECRETARY FOR ADMINISTRATION AND MANAGEMENT
Notice details
- Office
- JOB CORPS ACQUISITION SERVICES
- Last updated
- Sep 25, 2026
Identifiers
- Solicitation number
- 1605AE-23-R-00001
- Notice ID
- bcdb3273b6b24a8eaff1bedb2b361224
Description
UPDATE 12/5/2022 - Responses to questions received prior to the question due date are provided as a new attachment to this notice. A map of Job Corps Center locations has also been attached. The due date for responses has not changed and remains 12/19/2022 at 2:00 PM ET. ------------------------------------ The U.S. Department of Labor/OASAM/OSPE/Job Corps Acquisition Services is issuing this notice for the procurement of an Architect-Engineering (A-E) Indefinite Delivery/Indefinite Quantity (IDIQ) Multiple Award Task Order Contact (MATOC) to Perform General Engineering and Design Services in support of the Job Corps program nationwide, including all 50 states, DC, and Puerto Rico. This notice constitutes a special situation in accordance with FAR 5.205(d). Firms intending to be considered for evaluation in response to this notice shall submit a SF 330, Architect-Engineer Qualifications, as detailed below section, Submission Requirements. This procurement is a 100% Small Business Set-Aside. CONTRACT INFORMATION: The U.S. Department of Labor/OASAM/OSPE/Job Corps Acquisition Services plans to award multiple A-E Indefinite Delivery/Indefinite Quantity (IDIQ) contracts to comprise one (1) Multiple Award Task Order Contract (MATOC) for A-E services to perform General Engineering and Design Services. These contracts are being procured in accordance with the Selection of Architects and Engineers as implemented in FAR Subpart 36.6. The total shared capacity of the MATOC is $30,000,000.00. The North American Industrial Classification System (NAICS) Code is 541330. Job Corps operates 121 facilities/centers located across the continental United States, in Puerto Rico, Alaska, and Hawaii. All new construction and a large portion of their modernization is accomplished through Construction, Architecture and Engineering (A/E) and Design-Build (D/B) contracts issued by the Department of Labor (DOL). The most highly qualified proposals will be negotiated and contracts awarded with a five-year ordering period. Award of contracts to the selected firms is anticipated in June 2023. The minimum guarantee amount per firm over the life of each contract is $2,500. PROJECT INFORMATION: This requirement is for A-E services, as defined in 40 USC 1101 and FAR 2.101, in support of the Job Corps Program. Actual project work will be assigned through individual Task Order solicitations to the MATOC IDIQ awardees, for various services including: architecture, civil engineering, mechanical engineering, electrical engineering, MEP (mechanical, electrical, plumbing) design, structural engineering, construction administration, inspection, master planning, general and environmental studies, value engineering, energy conservation design practices, master planning, as well as other types of A/E services. A general description of the work and requirements is attached to this notice. All A-E firms responding to this notice are advised of the restrictions in FAR 36.209 which prohibits a contract for a construction project being awarded to the firm that designed the project or that firm’s subsidiaries or affiliates. Additionally, FAR Part 9.5, Organizational and Consultant Conflicts of Interest, prohibits an A-E firm being subcontracted to provide services to a Construction vendor on a project where the A-E firm previously completed work. SELECTION CRITERIA: The source selection criteria for this procurement that will be used in evaluating the Prime and its consultants are listed below in order of importance. (Criterion 1) The Experience and Past Performance of the Firm; (Criterion 2) Specialized Experience of Assigned Project Personnel; (Criterion 3) Firm’s Capacity to Perform Work; (Criterion 4) Qualifications of Assigned Project Personnel; (Criterion 5) Location. Project Teams considered the most highly qualified may have references checked; all submissions shall include a list of references with applicable telephone numbers and contact names. Project Teams still considered the most qualified following the reference checks will be interviewed. SF 330 Submissions failing to respond or provide complete information for each criterion as required by this notice will be determined non-responsive and will be removed from further consideration. Criterion 1. The Experience and Past Performance of the Firm I. Previous project experience similar to this project’s scope II. Cost control, project schedule and quality of work III. Government previous experience Criterion 2. Specialized Experience of Assigned Project Personnel I. Experience with projects on schools, dormitories, and Government facilities II. New building design and Major building renovations III. Building envelope renovation experience, specifically roof, facades, windows, and masonry IV. Building systems studies, analysis, and design (ex: soils/foundation, stormwater, MEP, fire protection) V. Historic preservation/renovation experience Criterion 3. Firm’s Capacity to Perform Work I. Previous experience working as project team II. Capacity to perform work within established periods of performance III. Project management skills IV. Project tools/software Criterion 4. Qualifications of Assigned Project Personnel I. Design capability II. Construction administration experience Criterion 5. Location I. Geographic coverage area for which the Firm can perform requirements SUBMISSION REQUIREMENTS: Interested A-E firms with the capabilities to perform this work shall submit one copy of a Standard Form (SF) 330, Architect-Engineer Qualifications, Part I and Part II. All information must be submitted on the SF 330 and shall not include other formats referencing the SF 330 in lieu of submitting the SF 330. A fully completed Part I and Part II sections of the SF 330 must be submitted. An incomplete SF 330 will not be considered for evaluation. Part I of the SF 330 Architect-Engineer Qualifications must include resumes of key personnel expected to have major responsibilities for the project. Section H of the SF 330 shall be tailored to reflect a strong background in the services as identified above. One copy of SF 330 Part I, Contract Specific Qualifications, which includes projects that are relevant to the type and nature of work for which the firm was responsible is required for the prime firm, and one copy of SF 330, Part II is required for the prime and each of its individual consulting firms, if applicable. Please note that SF 330 Parts I and II are to be submitted by the prime even if they are currently on file. Facsimile copies will not be accepted. Submissions shall be in electronic format (Microsoft Word or searchable Adobe Acrobat Portable Document File) only sent via email. The SF 330, Part I, shall have a page limitation of 70 pages. All fonts shall be at least 12 point to include text, tables and figures. Pages shall be 8.5 inches by 11 inches. The Organization Chart required in Part I, Section D, and the Matrix required by Part I, Section G, may be presented on a sheet up to 11 inches by 17 inches. The margins for pages that supplement the SF 330 forms shall not be less than one inch with the exception that ½ inch margins are allowed when using the Standard Form 330 template. All pages submitted will be considered as part of the page count with the exception of the following: cover page, table of contents, amendments, CPARS/ACASS, geographical location selection form, dividers and divider pages/tabs, pages defining acronyms, Part II – General Qualifications, Partnership or JV paperwork, licenses and proof of A/E firm registration. Note: pages in excess of the page limit will not be evaluated. The SF330/Package must contain the following documents: Identifying cover page (limited to 1 page) Table of Contents Signed SF330 Acknowledgment of Amendments if applicable (signed copies of the SF 330) Teaming Arrangements - Partnership or JV paperwork if applicable Only those firms that submit the required documents by the below submission deadline, will be considered for the review of qualifications. Failure to submit Standard Form 330 Part I and Part II will render the submission unacceptable. Facsimile submissions will not be accepted. All respondents must be registered in the System for Award Management (SAM). For instructions on registering with the SAM, go to www.SAM.gov. RESPONSES TO THIS NOTICE MUST BE RECEIVED NO LATER THAN 12/19/2022, 2:00 PM ET. Submissions received after this time will be viewed as late and will NOT be considered. Submissions shall be delivered via email to the following email address: JCASConstructionProcurement@dol.gov. The email’s subject line shall be structured as follows: Statement of Qualifications – AE MATOC – [Company Name]. ALL QUESTIONS SHALL BE SUBMITTED NO LATER THAN 12/1/2022 2:00 PM ET to JCASConstructionProcurement@dol.gov. Questions submitted after this time may not be considered for response. All timely submitted questions and/or comments will be addressed through subsequent amendments posted to this notice. No other means of communication (telephone, fax, etc.) will be accepted. NOTE: This is NOT a Request for Proposal and Solicitation packages are not provided. Respondents are hereby notified that, if designated as one of the most highly qualified firms, the response time for the issued Request for Proposal (RFP) is anticipated to be 30 calendar days from the date of RFP issue. Attachments: General Description of Work and Requirements SF 330, Architect-Engineer Qualifications
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
Solicitation:
1605AE-23-R-00001- 2×Special NoticeCurrentNov 18, 2022
Job Corps Architect/Engineer MATOC
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The Department of the Navy, NAVSUP Fleet Logistics Center Norfolk (FLCN), is conducting market research to identify capable sources to provide commercial Program Management and Support Services (PSC: R408) under NAICS 541330. The anticipated acquisition will be a Firm Fixed-Price (FFP) small-business set aside, and will require a SECRET security clearance. The Government intends to compete and solicit this requirement exclusively among prime contract holders under the SeaPort NxG vehicle pursuant to FAR 8.104 and FAR 16.507. Firms that do not currently hold an active SeaPort NxG prime contract will not be eligible to participate in the subsequent solicitation. Submission Requirements: A. Company Profile: Company Name, Address, Point of Contact (Name, Email, Phone), CAGE Code, and Unique Entity ID (UEI) B. SeaPort NxG Prime Contract Number: Provide your active SeaPort prime contract number. C. Socioeconomic Certification: Confirm your business size standard as a small business under NAICS 541330, and provide all active SBA-certified socioeconomic certifications, including SBA Veteran Small Business Certification (VetCert) if applicable. D. Security Classification: Verification of an active Secret Facility Security Clearance (FCL) issued by the Defense Counterintelligence and Security Agency (DCSA) via an informal written statement. DO NOT send classified proof, DD Form 254s, or any other related document. This is for market research only- a written statement that your firm holds a secret security clearance is sufficient for now. No additional marketing or capability information is required at this time. A formal socioeconomic set-aside determination has not yet been finalized. Once a determination is made, the final solicitation will be issued directly through the SeaPort NxG / PIEE Solicitation portal, at which time all appropriately aligned SeaPort NxG Prime Contract holders will receive an automated system notification. | - | Market Research | 11/16/2026 |
Department of Homeland Security, Office of Inspector General has a requirement to upgrade the Intrusion Detection System and Physical Access Control System. Security Hunter, Inc. currently provides DHS OIG with corrective maintenance, preventive maintenance, and related services for the affected physical-security systems under an existing competitively awarded FSS order. See attached Justification and Approval for more information. | - | Special Notice | 11/13/2026 |
The U.S. Department of State (DOS), Bureau of Global Acquisitions, Acquisitions Management (GA/AM), on behalf of the Bureau of Overseas Buildings Operations (OBO), anticipates awarding multiple (potentially eight or more) indefinite delivery/indefinite (IDIQ) quantity contracts to qualified architectural/engineering (A/E) firm-led teams (prime or joint venture) to support the Department's planning, design, construction, facility rehabilitation, system replacement, physical and technical security upgrade, construction and renovation of communications facilities (information management and emanation security systems), and building maintenance projects and programs at various worldwide Foreign Service posts, as well as support OBO offices in the Washington, DC metropolitan area. ****Please see attached documents for more information and submission requirements**** **** Please see Amendment A01 changes shown in red font. **** **** Please see Amendment A02 and the Omnibus Statement of Qualifications changes shown in blue font. **** **** Please see Amendment A03 changes shown in fuchsia colored font. **** **** Please see Amendment A04 changes shown in purple colored font. All the clarification questions and responses are also posted in the Attachments/Links section. **** ***10/27/2026 - The previous Q&A attachment for questions submitted through September 2, 2026 is deleted and replaced with the ALL Q&A through the October 26, 2026 deadline posted in the Attachments.*** | - | Solicitation | 11/10/2026 |
*10/21/2026- Amendment posted of Questions and responses posed by contractors. Submission due date reemains the same. THIS IS A SYNOPSIS OF PROPOSED CONTRACT ACTION. FOLLOW THE INSTRUCTIONS CONTAINED IN THIS NOTICE FOR RESPONDING TO THIS OPPORTUNITY. The Federal Bureau of Prisons (FBOP), Central (CO), anticipates the need for indefinitedelivery indefinite-quantity (IDIQ), firm fixed-price contracts for supplemental architect-engineer (A-E) services, with a one (1) year base requirement and up to four (4) unilaterally exercised option years, with a possibility for a six-month extention as well. The Government is not obligated to exercise any of the option periods. While the Government anticipates multiple awards, no more than four (4) awards are expected. The services will be for various FBOP facilities throughout the United States. See the Statement of Work attachment for description of services. Most projects will take place in a fully occupied, fully operational, secure correctional environment. Most projects require complex design effort and detail along with extensive coordination between design disciplines, the institutions, and Central Office during design and construction. Firms are to perform services as required by the issuance of individual task orders. The guaranteed annual minimum amount of each contract is $10,000.00 and the estimated annual maximum is $10,000,000. The North American Industrial Classification System (NAICS) code applicable to this requirement is 541310 (Architectural Services). Interested firms must be registered in the System for Award Management (SAM) at https://SAM.gov. This requirement will be fulfilled pursuant to the Federal Acquisition Regulation (FAR) 36.6 and the Brooks Act. Pursuant to FAR Deviation 36.201(b), for any firm(s) receiving award under this requirement, no construction contract may be awarded to the firm (including any of its subsidiaries or affiliates) that designs the corresponding project Firms having the capabilities to perform the services described in this announcement are invited to respond by submitting Parts I and II of the Standard Form 330 (Architect Engineer Qualifications) dated not more than 12 months before the date of this synopsis. The current version of the form along with any extra pages/sections may be retrieved from www.gsa.gov/forms (Type in "SF330" in the Form Name or Number block for a full listing of the associated forms. *** Include a cover letter detailing your firms name and main office address (as registered in sam.gov), UEI#, Tax ID# (TIN), CAGE code, and main point of contact for your firm through out the solicitation process (phone and e-mail). Submissions should be on standard 8.5'' x 11" format. No extraneous attachments. Selection criteria will be based on the following evaluation factors in descending order of importance: Specialized Experience and Technical Competence (32%) Capacity to Accomplish the Work in the Required Time (demonstrated ability to complete projects on time) (27%) Acceptability of an Established Team of Key Personnel (23%) Professional Qualifications Necessary for Satisfactory Performance (including licensed engineers and architects licensed Nationwide)(18%) Submit details (maximum of one page per project) of not more than five significant and/or complex renovation projects completed in the past five years (Utilize Section F of the SF-330). Identify the lead designer and address the design approach with salient features for each project. Discuss how the client's program, function, image, mission, economic, schedule and operational objectives were satisfied by the overall design/planning solution. Include tangible evidence where possible such as certificates, awards, peer recognition, etc., demonstrating design excellence. Provide a client reference contact for each project, including name, title, address, phone, fax, and email. Submit resumes of key personnel outlining commitment to projects and qualifications and relevant experience as individuals and as a team. Highlight sustainability features incorporated into the project design (e.g., energy/water efficiency, waste reduction, use of recycled materials). Submit a narrative outline of not more than one page describing the firm's project management planning, coordination, scheduling and production facilities, capabilities, and techniques for both design and construction inspection (Utilize Section H of the SF-330). Submit a narrative outline (maximum one page) with examples describing the firm's ability to evaluate/develop accurate preliminary project budgets, ability to control project costs during design process, ability to design within funding limitations, methods used to coordinate construction documents, work of various engineering disciplines, and provide general production quality control (Utilize Section H of the SF-330). No fax or paper submissions. Submit electronically through the JEFS APP BOX at link below: https://jefs.app.box.com/f/336fbbe977394048827a238f901db3a3 All submissions should be in Adobe format. Title the file in the following format: 15BBNF26R70000006_ Company Name_SF330 Architect Engineer (A/E) Services for Central Office Electronic copies of each submission shall be compatible with the following software products: Adobe Acrobat Reader 11 and Microsoft Office Suite 2016. Narrative portions of the submission shall be in Adobe Acrobat portable document file (pdf) searchable text format. The Submitter shall not embed sound or video (e.g., MPEG) files into the submission files. Electronic files shall be clearly identified for each volume, section, and item. The Submitter must ensure electronic files are virus-free and shall run an anti-virus scan before submission. Submissions by mail or hand carried will not be evaluated. All responses must be received no later than Wednesday, November 4, 2026, 10:00 AM MST. It is the responsibility of the Submitter to confirm receipt by contacting Alex Jackson, Contracting Officer, at a4jackson@bop.gov. Failure to submit all required information may result in rejection. All submissions received after the exact time specified for receipt shall be treated as late submissions and will not be considered except under facts and circumstances allowed by the Federal Acquisition Regulations (FAR). Based on these submissions, a short-list of no more than six (6) firms will be selected for an interview. Firms should be prepared to discuss their submittals and to demonstrate their ability to fulfill the contract requirements. Final selection will be based on SF-330 submissions and interviews. After the SF-330 review and interview process, four (4) selected firms will be invited to submit a formal proposal and must be prepared to negotiate overhead, profit, and hourly rates for anticipated disciplines for use in negotiating firm-fixed-price contract rates as well as firm-fixed-price task orders to be completed under the contract. All contract awards and task orders thereunder are subject to a determination of fair and reasonable pricing. This acquisition is 100 percent small business set-aside. Firms must be registered in SAM.gov as a small business (see FAR provision 52.219-1 in the Representations & Certifications section of the SAM registration. If you have questions about SAM.gov, Government procurements in general, or need assistance in the preparation of your bid/proposal/offer, a local Procurement Technical Assistance Center (PTAC) may be able to help. The Procurement Technical Assistance Program was authorized by Congress in 1985 in an effort to expand the number of businesses capable of participating in the Government marketplace. To locate a PTAC near you, go to http://www.aptac-us.org. | - | Pre-Solicitation | 11/04/2026 |
The 354th Eielson Contracting Squadron is seeking qualification packages for A&E service for the project below: The Government requires A-E Title I investigation and design services for the repair and renovation of Nose Dock 7, Building 1232, at Eielson AFB, Alaska. The objective is to develop a complete and coordinated design that addresses the facility deficiencies and operational requirements identified in this SOW and provides the basis for a future construction acquisition. The scope also includes Title II construction-phase design support as identified in this SOW. Construction execution is not included in this effort. This information will be utilized to prepare comprehensive drawings, schedules, specifications, and cost estimates for all facets of work and disciplines/trades involved in the construction project. The primary objective is to develop a biddable set of construction documents tailored to address the unique challenges presented by the extreme Arctic conditions at Eielson AFB, AK. Notices to Offerors: This RFQ is a request for information and not to be confused with a request for proposal (RFP). This RFQ is strictly used by the Government to conduct market research for determining the three (3) most highly qualified offerors. The contract schedule set fourth in the statement of work requires a delivery of 100% in 282 calendar days. If this is something your firm is interested in and accomplish, please submit a combined Instructions to Offers (Evaluation Factors Document), SF-330 (Architect-Engineer Qualification-Standard Form 330), and PPQ (Past Performance Questionnaire) to 354CONS.PKA.Designs@us.af.mil. All questions regarding this RFQ must be emailed to the e-mail addresses above by 3:00 P.M. AKT on 27 November 2026. Responses will be provided by COB 2 Dec 2026. | - | Pre-Solicitation | 12/10/2026 |
Additional Details
Solicitation Number
1605AE-23-R-00001
Archive Date
Not specified
Office Address
Washington, DC, 20210