GovChime
Notice ID: 069aef8801274022a18450ed62827709Combined Synopsis/SolicitationArchived

Nogales Headworks Rebuild

Archived on October 3, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
3:00 PM MDT
Posted
September 1, 2026
Notice type
Combined Synopsis/Solicitation
Set-aside
No Set aside used
NAICS
237110: Water and Sewer Line and Related Structures Construction
Agency
International Boundary and Water Commission

Notice details

Office
INTERNAT BOUNDARY AND WATER COMM
Place of performance
Arizona, 85648
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
191BWC26R0019
Notice ID
069aef8801274022a18450ed62827709

Description

THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

Prepared in accordance with the format in FAR Subpart 12.6; this announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. (FAR 12.603)  

1. Solicitation Number: USIBWC-NIWTP-HEADWORKS-2026-RFQ

   Issue Date: [Insert date]

   Type: Request for Quotation (RFQ).  (FAR 12.603(c)(2))  

2. FAC:[Insert date Request for Quotation (RFQ).  (FAR 12(c)(2))  

The solicitation document and incorporated provisions/clauses are those in effect through Federal -9f4eb5】

3. Set-aside/Competition: BRAND NAME ONLY, SOLE SOURCE under FAR Subpart 13.5 (commercial items). OEM‑authorized sources may respond. Brand‑Name Justification is attached per FAR 5.102(a)(6); sole‑source justification prepared IAW FAR 13.501 using the 6.303‑2 format.  

4. NAICS / PSC:

   • NAICS: 333318 (Other Commercial and Service Industry Machinery Manufacturing) – Primary

   • PSC: 4630 (Sewage Treatment Equipment)

   • Additional PSC for installation services (if separately CLINed): Z1NE/Z2NE (Water & Sewage Facilities M&R/Repair)

   (Based on requirement content and PWS site‑work at NIWTP.) 

5. Description/Requirement:

   The U.S. Section, International Boundary and Water Commission (USIBWC), Nogales Field Office, requires purchase and installation of OEM-specific headworks equipment at the Nogales International Wastewater Treatment Plant (NIWTP), Rio Rico, AZ:

   • One FT‑48 Mensch Severe‑Duty Bar Screen (¾" spacing) (replace in kind)

   • Two Vulcan EWP 250/1000 Washing Presses with control panels (replace in kind)

   • Two ESR stair‑type fine screens (ESR‑34 or ESR‑28 per final PWS correction) with controls (replace in kind)

   • Associated OEM wear parts, removal, installation, testing, commissioning, and training

   Equipment must match existing NIWTP channel geometry (4’x7’), hydraulic profiles (~20 MGD/channel), mounting interfaces, discharge elevations, and NEMA 4X/NEMA 7 control requirements; must integrate with existing screw conveyors and SCADA.  

6. Location & Period of Performance:

   Place of Performance: NIWTP, 865 E. Frontage Rd., Rio Rico, AZ 85648. Period of Performance: 120 calendar days ARO. 

   FOB: Destination; Inspection/Acceptance: Destination (Commercial).  (FAR Subpart 12.4/12.301 framework)  

7. CLIN Structure (supply + install):

   CLIN 0001: FT‑48 Mensch Severe‑Duty Bar Screen, delivered & installed, OEM brand‑name

   CLIN 0002: Vulcan EWP 250/1000 Washing Press, delivered & installed (Qty 2), OEM brand‑name

   CLIN 0003: ESR stair‑type fine screen, delivered & installed (Qty 2), OEM brand‑name

   CLIN 0004: Associated OEM wear parts, controls, and integration

   CLIN 0005: Removal, installation labor, testing, commissioning, training

   CLIN 0006: O&M manuals and training materials (2 hard copies + electronic)

   (See PWS for dimensional, hydraulic, electrical, and acceptance requirements.)  

8. Site Visit (Optional but encouraged):

   Contact: Albert Flores, 520‑281‑1832; cell 520‑551‑6564; Albert.Flores@ibwc.gov

   PPE required; access may be affected by railroad operations; alternate dirt road available. 

9. Brand Name & Sole‑Source Basis:

   Replacement must be “in‑kind” to match NIWTP’s existing engineered channels, hydraulics, electrical panels, and SCADA. Non‑OEM substitutions would require channel demolition/reconstruction, conveyor replacement, panel rework, SCADA redesign, and extended downtime.  (NOI and J&A basis)  

10. Urgency:

   Due to unusual and compelling urgency, NIWTP currently operates with only one functional coarse screen/conveyor; remaining equipment is inoperable or removed. Loss of the remaining train risks environmental non‑compliance and service disruption. The Government would be seriously injured by delay; therefore, shortened response periods are used under FAR 5.203 for commercial items. If 6.302‑2 is invoked, synopsis timing may be bypassed per 5.202(a)(2). J&A will be posted within 30 days after award per 6.305(b).  

11. Instructions to Offerors:

   The provision at FAR 52.212‑1 applies; submit a quotation with:

   • Technical approach demonstrating OEM brand models and authorization

   • Price breakout by CLIN (lump sum allowed with schedule of values)

   • Delivery/installation schedule meeting 120‑day PoP

   • Warranty, training, and commissioning plan

   Include completed FAR 52.212‑3 (Reps & Certs).  

12. Evaluation (Streamlined; FAR 12.6 / 13.106):

   Best‑value tradeoff or LPTA at CO’s discretion; factors: Technical (brand‑name OEM fit & authorization), Price, Past Performance. Relative importance need not be stated when using Part 13; evaluation complies with FAR 12.6 and 13.106.  

13. Response Time & Submission:

   Quotes due: [Insert Date/Time, MST] (shortened timing permitted for commercial items under FAR 5.203(a); combined synopsis/solicitation used under FAR 12.603). Email: [KO email]. Subject: “NIWTP Headworks Rehabilitation – Brand Name Quote”.  

14. Attachments:

   • PWS – NIWTP Headworks Rehabilitation (May 2026)

   • Brand‑Name Justification (FAR 11.105)

   (Brand‑name justification posted with this solicitation per FAR 5.102(a)(6).)  

Section II  Solicitation Provisions (Commercial Items)

A. Core Commercial Provisions (Prescribed by FAR 12.301)

1) FAR 52.212-1, Instructions to Offerors—Commercial Products and Commercial Services (Sep 2023).  (12.301(b)(1); tailor per 12.302)  

2) FAR 52.212-3, Offeror Reps & Certs—Commercial Products and Commercial Services.  (12.301(b)(2))  

B. Brand Name Posting with Solicitation

• The brand‑name justification (Mensch FT‑48, Vulcan EWP 250/1000, ESR stair‑type screens) is posted with the solicitation per FAR 5.102(a)(6).  

C. Combined Synopsis/Solicitation Statement

• This is a combined synopsis/solicitation issued under FAR 12.603; shortened response times may be used for commercial items under FAR 5.203(a).  

D. Urgency Notice (if CO invokes 6.302-2)

• Unusual & Compelling Urgency: normal synopsis timing may be bypassed under FAR 5.202(a)(2); J&A posted within 30 days after award (FAR 6.305(b)).  

Section I Contract Clauses

A. Core Commercial Clauses (Prescribed by FAR 12.301)

1) FAR 52.212-4, Contract Terms and Conditions—Commercial Products and Commercial Services (Nov 2023).  (12.301(b)(3); tailor per 12.302/12.4)  

2) FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Products and Commercial Services (Mar 2026).  (12.301(b)(4); check boxes below)  

   The Contracting Officer checks the following:

   ☒ 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.  

   ☒ 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities.  

   ☒ 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment (Section 889).  

   ☒ 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations.  

   ☒ 52.232-40, Providing Accelerated Payments to Small Business Subcontractors.  

   ☒ 52.233-3, Protest After Award.  

   ☒ 52.233-4, Applicable Law for Breach of Contract Claim.  

B. Domestic Sourcing / Sanctions (Commercial Supplies & Install)

1) FAR 52.225-1, Buy American—Supplies (Oct 2022) (insert per FAR 25.1101(a)(1), as applicable to supply of OEM equipment delivered for use in U.S.).  

2) FAR 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021).  (insert per FAR 25.1103(a)) 

   [CO note: If CO determines the effort is “construction” per FAR 36, then use 52.225‑9 instead of 52.225‑1; otherwise keep 52.225‑1 for supply of commercial products.]  

C. Site/Installation Addenda (NIWTP work on Government installation)

1) FAR 52.228-5, Insurance—Work on a Government Installation (when work occurs at NIWTP).  (28.310) 

2) FAR 52.236-2, Differing Site Conditions (include only if CO treats work as construction under Part 36).  (36.502)  

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Seone Michael Jones

Documents

Files (4)

  • 191BWC26R0019.pdf

    178 KBAdded in Combined Synopsis/Solicitation version 3Posted
    Download
  • BRAND NAME ONLY JUSTIFICATION.docx

    23 KBAdded in Combined Synopsis/Solicitation version 3Posted
    Download
  • CLIN Structure - FY264321003 Nogales Headworks.docx

    23 KBAdded in Combined Synopsis/Solicitation version 3Posted
    Download
  • PWS FY25 Replacement of one Coarse Screen two Washer Co.docx

    3.1 MBAdded in Combined Synopsis/Solicitation version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Combined Synopsis/SolicitationArchivedCurrent

    Nogales Headworks Rebuild

    Notice 069aef8801274022a18450ed62827709 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. Solicitation number 12445127B0001 is issued as an Invitation for Bid (IFB) for Lakeside Office Sewer Line Replacement. This project involves removal and replacement of the existing sanitary sewer service lateral serving the US Forest Service Lakeside District office and installation of a new sewer line connection to the Pinetop–Lakeside Sanitary District (PLSD) public sewer main. Work will include excavation, installation, surface restoration, and all associated testing required for acceptance by PLSD and the Owner. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 237110 The small business size standard is $39.5M This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency.
-Combined Synopsis12/14/2026
-AwardedOpen
Award of 36C77627C0001 - 644-26-001 - Plumbing Infrastructure Repairs Ext Site - Phoenix, AZ
-AwardedOpen
The U.S. Consulate General Cape Town hereby issues Amendment 0001 to provide responses to questions received from prospective offerors regarding the CCTV/Perimeter Security Trenching Works solicitation. The Questions and Answers (Q&A) document is attached for review. The quotation submission deadline has been extended to Thursday, November 5, 2026, at 10:00 AM South African Standard Time (SAST). All other terms and conditions of the solicitation remain unchanged, except as expressly amended.
-Special Notice11/05/2026
1. General Summary of Services Required The U.S. Consulate General Cape Town invites qualified contractors to submit quotations for trenching, underground conduit installation, handhole installation, extension of thirteen (13) existing perimeter fence posts for security camera installation, and associated civil works at the U.S. Consulate compound in Cape Town. The contractor shall provide all labor, supervision, contractor-furnished materials, equipment, tools, transportation, safety measures, and incidentals necessary to complete the work in accordance with the attached Scope of Work and Design Layout Package, Cape Town–PME–26004, 100% Design, dated July 21, 2026, and the additional requirements identified in this solicitation. Work includes, but is not limited to: Site preparation, excavation, and trenching along designated routes. Installation of underground conduits, handholes, and associated infrastructure. Protection of existing underground utilities and surrounding infrastructure. Backfilling, compaction, and reinstatement of disturbed surfaces. Site safety, waste removal, and final cleanup. Extension of existing perimeter fence posts at thirteen (13) designated locations to accommodate the installation of new security cameras. Government-Furnished and Contractor-Furnished Materials The U.S. Government will provide the conduits and handholes required for the trenching works. The contractor shall provide all remaining materials, including sand, soil, gravel, backfill materials, and other consumables necessary to complete the installation. The contractor shall also provide all labor, supervision, tools, equipment, transportation, and incidentals necessary to install the Government-furnished conduits and handholes. Perimeter Fence Post Extensions – 13 Locations In addition to the trenching works, the contractor shall extend the existing perimeter fence posts at thirteen (13) designated locations to accommodate new security cameras. The contractor shall provide all materials, labor, equipment, tools, and incidentals necessary to complete this work. The attached reference photographs illustrate examples of the required fence post extensions. Contractors shall review these photographs and assess the work during the site visit. Any clarification regarding the required extensions must be requested before the clarification closing date. Both the trenching works and the thirteen (13) fence post extensions must be included in the contractor's total firm-fixed-price quotation. The attached Scope of Work and Design Layout Package governs the technical requirements for the work described therein, supplemented by the additional requirements expressly identified in this solicitation. Contractors are responsible for reviewing the complete package and including all necessary costs in their quotations. 2. Contract Details and Evaluation The Government intends to award a firm-fixed-price purchase order to the responsible offeror submitting the lowest-priced technically acceptable (LPTA) quotation. Technical acceptability will be evaluated on a Technically Acceptable / Not Technically Acceptable basis against the following minimum requirements: Technical Approach: Demonstrated understanding of the Scope of Work and Design Layout Package and a practical methodology for completing the requirement. Relevant Experience: Evidence of at least two comparable completed trenching, underground utility, or civil construction projects, supported by contactable references. CIDB Registration: Active registration with the Construction Industry Development Board (cidb), with a minimum grading designation of 3 in the applicable class of construction works. Professional Engineering Qualifications: Employment of a Civil Engineer or Professional Engineering Technologist registered with the Engineering Council of South Africa (ECSA). Site Manager/Engineer Experience: Demonstrated recent experience supervising setting out, trenching, shoring, dewatering, steel fixing, formwork, concrete placement, and piping/conduit installation. Personnel and Resources: Availability of appropriately qualified personnel, equipment, and resources to complete the work. Project Schedule: Demonstrated ability to complete the work within the required timeframe. Health and Safety: Adequate preliminary safety methodology addressing the applicable construction and excavation hazards. Scope Compliance: Confirmation that the quotation covers the complete Scope of Work and Design Layout Package without material exclusions or deviations. Only technically acceptable quotations will be considered for award based on price. The Government may award based on initial quotations without discussions. 3. Interested Vendors / Mandatory Site Visit Interested contractors must possess the necessary construction experience, professional qualifications, registrations, equipment, and resources to complete the requirement. A mandatory site visit will be conducted as follows: Date: Tuesday, October 27, 2026 Time: 10:00 AM SAST Location: U.S. Consulate General Cape Town Attendance Confirmation Deadline: Friday, October 23, 2026 Prospective offerors must confirm attendance before the deadline and provide the full name, ID number, contact number, vehicle make, model, and colour of each representative attending. Contractors who fail to provide the required information by the deadline may be denied access to the compound. Attendance at the mandatory site visit is required for quotation eligibility. All technical questions must be submitted in writing by Friday, October 30, 2026 at 10:00 AM SAST . Official clarifications and amendments will be issued through SAM.gov, as applicable. 4. Proposal Submission Requirements Offerors must submit the following as part of their quotation: Company Profile: Brief company background and description of relevant construction capabilities. Relevant Experience: Details of at least two comparable completed projects, including project descriptions and contactable references. Technical Approach / Work Plan: Brief methodology demonstrating an understanding of the Scope of Work and Design Layout Package and the proposed approach to completing the work. Contractor Registration, Professional Qualifications and Experience: CIDB Registration: Proof of active cidb registration with a minimum grading designation of 3 in the applicable class of construction works. ECSA Registration: Evidence that the contractor employs a Civil Engineer or Professional Engineering Technologist registered with ECSA, including proof of current registration. Site Manager/Engineer: CV and supporting experience demonstrating recent supervision of setting out, trenching, shoring, dewatering, steel fixing, formwork, concrete placement, and piping/conduit installation. Project Schedule: Proposed commencement date, work duration, and completion period. Health and Safety: Preliminary site-specific safety methodology addressing the principal construction and excavation risks. The successful contractor shall submit a comprehensive site-specific safety plan before commencement. Completed Pricing Schedule: Detailed firm-fixed-price quotation using the attached pricing schedule, covering all labor, contractor-furnished materials, equipment, trenching, installation of Government-furnished conduits and handholes, backfilling, reinstatement, and associated costs. The quotation must also include a separately priced line item for extending the existing perimeter fence posts at thirteen (13) locations, inclusive of all required contractor-furnished materials, labor, equipment, and installation costs. Both the trenching works and fence post extensions shall be included in the total firm-fixed-price quotation. NDAA Compliance: Completed Express NDAA Certificate for Vendor Compliance. Defense Base Act (DBA) Insurance: The successful contractor shall be required to obtain and maintain Defense Base Act (DBA) insurance in accordance with the applicable U.S. Government contract requirements. Offerors must include the cost of DBA insurance in their quotation and separately identify the insurance premium under CLIN 0009 of the attached pricing schedule. This cost must be included in the total firm-fixed price. Proof of the required DBA insurance coverage must be provided before commencement of work. For information on obtaining DBA insurance, including a list of U.S. Department of Labor-authorized insurance carriers, please visit: https://www.dol.gov/agencies/owcp/dlhwc/lscarrier Pricing Requirements: The attached pricing schedule must be completed and submitted with the quotation. Quantities and unit rates must be provided for applicable work elements, with all costs included in the total firm-fixed price. Contractors must verify quantities against the Scope of Work and Design Layout Package and raise any discrepancies before the quotation closing date. Prices must be quoted in South African Rand (ZAR), with VAT separately identified. Any exclusions, assumptions, or deviations must be clearly identified. Material deviations may result in a quotation being determined technically unacceptable. The total price must cover the complete requirement, including all incidental work necessary for satisfactory completion. 5. Project Completion and Scope Control The contractor shall complete the work within 4-6 Weeks following the authorized commencement date. All construction activities, safety requirements, site protection, reinstatement, and completion obligations shall be performed in accordance with the attached Scope of Work and Design Layout Package and the resulting purchase order. Any unforeseen site conditions or proposed changes affecting the scope, price, or completion period must be promptly reported to the Government. No changes or additional work may proceed without prior written authorization from the Contracting Officer. 6. Quotation Submission Instructions Please note the following BEFORE submitting your offer: Solicitation Number: 19SF2027Q0001 Closing Date: Tuesday, November 3, 2026 at 10:00 SAST Submission Email: capetown_quotation@state.gov Questions Deadline: Friday, October 30, 2026 at 10:00 AM SAST All quotations and supporting documents must be submitted electronically and in English. The solicitation number must appear in the email subject line. The completed pricing schedule must accompany the quotation. Quotations must remain valid for at least 30 calendar days after the closing date. Offerors must complete the attached Express NDAA Certificate for Vendor Compliance. As a Diplomatic Mission representing the U.S. Government, the U.S. Consulate cannot sign vendor contracts, credit applications, or separate vendor terms and conditions. Any vendor terms or conditions inconsistent with the Government's solicitation or resulting purchase order shall not apply unless expressly accepted by the Contracting Officer. 7. Payment Terms The Government intends to award a firm-fixed-price purchase order covering the complete requirement. No adjustments will be made for material price increases or exchange-rate fluctuations after award, except as authorized under the resulting purchase order. Payment will be made via Electronic Funds Transfer (EFT) following satisfactory completion, Government acceptance, and receipt of a proper invoice, in accordance with the purchase order terms. Advance payments and deposits are not permitted. Note: Procurement will acknowledge receipt of quotations within four (4) business days. If confirmation is not received, offerors should contact Procurement before the quotation deadline to verify receipt.
-Solicitation11/03/2026

Additional Details

Solicitation Number

191BWC26R0019

Archive Date

Oct 3, 2026

Office Address

El Paso, TX, 79902