INL Serbia Shooting Range Simulator System
Active, responses due . Full description on SAM.gov.
Overview
- Response deadline
- 1:00 PM EST
- Posted
- November 6, 2026
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Small Business Set Aside - Total
- NAICS
- 333310: Commercial and Service Industry Machinery Manufacturing
- Agency
- Department of State
Notice details
- Office
- ACQUISITIONS - INL
- Last updated
- Nov 6, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- 191NLE27Q0007
- Notice ID
- b4768962a75e49cfb18321c7a35cbf6c
Description
The International Narcotics and Law Enforcement Section of the Embassy of the United States of America in Serbia supports procurement of a scenario-based laser shooting range system and complementary tactical preparedness and response police training kits to complete new training facilities at University or Criminal Investigation and Police Studies in Belgrade, Serbia. This training solution will provide controlled, analytical training environment needed to assess, document, and translate scenario-based tactical instruction into measurable performance improvements, institutional accountability and long-term learning.
SUBSTANTIVE REQUIREMENTS
The contractor shall fulfill the following substantive requirements (See Attachment A RFQ/SOW for a complete listing of requirements/quantities):
I LASER TRAINING SIMULATOR SYSTEM
II SIMULATION TRAINING CENTRE - TRAINING KITS
III INSTALLATION/TRAINING – ONSITE INTERNATIONAL
Delivery
The vendor is responsible for the delivery of all items. The vendor shall consolidate the entire shipment to prevent loss and misdirection. Entire shipment must be consolidated at the origin and shipped consolidated, partial shipments are not accepted by post due to the Serbian customs donation regulations. Entire shipment must be consolidated under one AWB or CMR. Any lost or damaged items during shipment shall be replaced by the contractor upon notification. Packaging and preservation shall be IAW best commercial practices to enable shipment to final destination in Serbia to the address specified (see Attachment A RFQ/SOW), without repacking or incurring damage during shipment and handling.
Delivery shall be made FOB Destination as soon as possible but not later than 90 days from the date of contract award.
Submission Requirements (please see details in the Attachment A – RFQ/SOW)
Evaluation Criteria (please see details in the Attachment A – RFQ/SOW)
After initial evaluation of quotes, the Contracting Officer may negotiate final terms with one or more contractors of the Government’s choice before issuing a purchase order. The Contracting Officer will not negotiate with any contractors other than those of the Government’s choice and will not use the formal source selection procedures described in FAR Part 15. The Government may perform a comparative evaluation to select the contractor that provides the best value, considering the evaluation factors below.
The Contracting Officer may issue a purchase order to other than the contractor with the lowest proposed price. The Government will consider the following factors when selecting contractors for award.
The following factors shall be used to evaluate quotes:
1) Technical Specifications: Quote must meet or exceed required technical specifications. Compliance with all required features (to include realism of the training, system flexibility, and performance-measurement tools). Quote meets warranty term requirements. Quote verifies compliance with all requested equipment/quantities, utilizing Exhibit A, “Technical Specs”.
2) Delivery Timeline.
3) International Deployment Experience and Maintenance/Support Coverage in Europe: The entity demonstrating International Deployment Experience and Maintenance/Support Coverage in Europe.
4) Past Performance: The entity demonstrates relevant past performance in at least three (3) contracts of similar or superior characteristics to those of this project.
5) Price: The overall price will be considered, and the lowest price is favorable.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
Files (4)
- Download
Exhibit B Pricing.xlsx
13 KBAdded in Combined Synopsis/Solicitation version 1Posted - Download
Exhibit A Technical Specs.docx
45 KBAdded in Combined Synopsis/Solicitation version 1Posted - Download
Attachment A - RFQ SOW.pdf
339 KBAdded in Combined Synopsis/Solicitation version 1Posted - Download
191NLE27Q0007.pdf
199 KBAdded in Combined Synopsis/Solicitation version 1Posted
Lifecycle
- 1Version 1Combined Synopsis/SolicitationCurrent
INL Serbia Shooting Range Simulator System
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Please review "RELATED NOTICE: W900KK-23-R-LTRaC" posted against NAICS code 332999-All Other Misc. Fabricated Metal Product Manufacturing. Several North American Industry Classification System (NAICS) codes being considered for the Live Training, Ranges, and Combat Training Centers (LTRaC) Multiple Award Contract (MAC) effort: a) LOT 1 – Full and Open (Target Lifters & TRACR Computers): NAICS 332999 (All Other Misc. Fabricated Metal Product Manufacturing) b) LOT 2 – Small Business Set Aside (FASIT, DRTS, HITS, JPMCR, CTS Tech Refresh): NAICS 333310 (Commercial and Service Industry Machinery Manufacturing) c) LOT 3 – Full and Open (DRTS Tech Refresh): NAICS 333318 (Other Commercial and Service Industry Machinery Manufacturing) d) LOT 4 – Full and Open (CTCs, HITS, STE-LIVE, JPMRC Efforts): NAICS 333310 (Commercial and Service Industry Machinery Manufacturing) Due to SAM.gov software limitations, each Notice published can only be posted against only one NAICS code. The proposed LTRaC solicitation will include the three (3) NAICS codes listed above. Vendors interested in the LTRaC effort are invited to search 'Notice ID' W900KK-23-R-TRaC for the detailed description of the requirement. | 64% | Market Research | 08/01/2022 |
Please review "RELATED NOTICE: W900KK-23-R-LTRaC" posted against NAICS code 332999-All Other Misc. Fabricated Metal Product Manufacturing. Several North American Industry Classification System (NAICS) codes being considered for the LTRaC effort: a) LOT 1 – Full and Open (Target Lifters & TRACR Computers): NAICS 332999 (All Other Misc. Fabricated Metal Product Manufacturing) b) LOT 2 – Small Business Set Aside (FASIT, DRTS, HITS, JPMCR, CTS Tech Refresh): NAICS 333310 (Commercial and Service Industry Machinery Manufacturing) c) LOT 3 – Full and Open (DRTS Tech Refresh): NAICS 333318 (Other Commercial and Service Industry Machinery Manufacturing) d) LOT 4 – Full and Open (CTCs, HITS, STE-LIVE, JPMRC Efforts): NAICS 333310 (Commercial and Service Industry Machinery Manufacturing) Due to SAM.gov software limitations, each Notice published can only be posted against only one NAICS code. The proposed Live Training, Ranges, and Combat Training Centers (LTRaC) solicitation will include the three (3) NAICS codes listed above. Vendors interested in the LTRaC effort are invited to search 'Notice ID' W900KK-23-R-TRaC for the detailed description of the requirement. | 58% | Market Research | 08/01/2022 |
This is an Award Notice of Solicitation N61340-26-R-1010 to Contract Award N61340-26-1017. | 54% | Awarded | Open |
6 February 2025: SAM.gov posting edited to add RFP Industry Questions- Government Answers (File Name: "RFP-QandAs_LTRaC-MAC1_6Feb2025") ********************************************************* 23 January 2023: SAM.gov posting edited to add RFP Amendment 01 to extend the Industry questions due date to 27 January 2025. ********************************************************* 13 January 2025: Request for Proposal (RFP) to establish the Live Training Ranges and Combat Training Centers Multiple Award Contract 1 (LTRaC MAC 1): Small Business Set Aside for Target Lifters, Initial Targets, and Ancillary Range Control Computers. Proposals are due NLT 4:00pm EST on 12 February 2025. Industry questions related to the RFP are due no later than 27 January 2025. | 54% | Combined Synopsis | 02/12/2025 |
LTRaC MAC 1 PRESOLICITATION NOTICE (13 Jan 2025 update): This update incorporates the Government answers to Industry questions related to the LTRaC MAC 1 DRAFT RFP (file name LTRaC-MAC1_Draft-RFP-Industry-Questions-Govt-Answers_Jan2025) *********************************************************************************************************************** LTRaC MAC 1 PRESOLICITATION NOTICE (posted in SAM.gov on 31 Oct 2024): This notice provides a copy of the DRAFT Request for Proposal (DRFP) W900KK-25-R-0001 for Industry review and feedback. Potential Offerors are encouraged to comment and provide feedback on all aspects of the DRFP, including, but not limited to the requirements, SOW, CLIN structure, schedules, proposal instructions (DRFP Section L), and evaluation approaches/criteria (DRFP Section M), attachments, and/or other programmatic risk issues associated with the performance of the work. Potential Offerors are requested to identify unnecessary or inefficient requirements. The Government IS NOT requesting proposals in response to this DRFP, does not intend to award a contract on the basis of this DRFP, and will not pay for any information received regarding this DRFP. Therefore, any references to the submission of a completed SF33 are not applicable to this DRFP. Feedback and comments regarding the DRFP are to be submitted utilizing Attachment 4 - Draft RFP Questions/Comments Form, and should be submitted electronically in writing to the Contract Specialist, Helen.G.Simpson2.civ@army.mil, by 2:00 PM EST, November 18, 2024. If a respondent believes their comments contain confidential, proprietary, competition sensitive, or business information, those questions/comments shall be marked appropriately. However, questions that are marked as containing confidential, proprietary, competition sensitive or business information will not be provided with a Government response. The Government will consider all comments received in preparation for the Final RFP. To the extent a comment leads the Government to revise the acquisition approach or requirements, the change will be reflected in the Final RFP. Documents related to this acquisition, including this presolicitation notice, the solicitation, attachments, any amendments will be attainable electronically from the Government-wide point of entry website at www.SAM.gov. It is the potential Offerors responsibility to monitor the website for updates. BACKGROUND AND OBJECTIVES: The U.S. Army Contracting Command-Orlando (ACC-ORL) has a requirement to establish the Live Training Ranges and Combat Training Centers (LTRaC) Multiple Award Contract (MAC) 1 which will consist of the work required to provide and install live-fire training systems to support military ranges worldwide. These systems will utilize the Government provided Basic Army Target Lifter (BATL) Technical Data Package (TDP) and available equipment offered by contractors with minor modifications allowed to support military needs. All equipment installed under this contract will be used for training conducted both day and night and under all weather conditions. LTRaC MAC 1 involves work at any live-fire training area to include portable / deployable ranges, Home Station ranges, the U.S. Army’s CTCs and other services live-fire ranges. MAC 1 includes presentation devices (i.e., Stationary Infantry Targets [SIT], Stationary Armor Targets [SAT], Moving Infantry Targets [MIT], and Moving Armor Targets [MAT]), communication devices, other commercial targets, and ancillary hardware. Lastly, this effort includes Information Technology (IT) hardware and the Government approved range control software to operate the range. | 54% | Pre-Solicitation | 01/14/2025 |
Additional Details
Solicitation Number
191NLE27Q0007
Archive Date
Dec 8, 2026
Place of Performance Country
SERBIA
Office Address
WASHINGTON, DC, 20520