Notice ID: d1f3d157cb0b4cafaf52d19022b9213cSolicitationArchived
Basketball court reconstruction
Archived on September 8, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 10:00 AM GMT+2
- Posted
- July 31, 2026
- Notice type
- Solicitation
- NAICS
- 237990: Other Heavy and Civil Engineering Construction
- Agency
- Department of State
Notice details
- Place of performance
- Vienna
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- 19AU9026Q0020
- Notice ID
- d1f3d157cb0b4cafaf52d19022b9213c
Description
This solicitation is for reconstruction of the basketball half-court at the U.S. Tri-Mission Marine House in Vienna, Austria. The work includes but is not limited to the following tasks – all as specified in the attached Statement of Work: Site Installation Demolition Demolition, removal, and disposal of the existing half-court basketball court (asphalt layer 7 x 8 m) and the basketball basket with posts. Excavation, oil removal and disposal of the foundation pit for new basketball half- court dimension (13mx14m = 182m²), 0.3m depth Removal of the existing outdoor lighting and reinstallation in a new location Construction of a new sports court, half-court basketball court (13 m x 14 m = 182 m²) Preparation and installation of the subbase and base course, including drainage Installation of the surface layer (EPDM rubber surfacing or equivalent) Installation of point foundations for 1 basketball hoop and 2 existing light poles Installation of 1 height-adjustable basketball hoop and 2 existing light poles, including wiring/rewiring Laying of concrete lawn edging stones Painting lines Final cleaning
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Zahid Raja
Secondary Contact
Daniel Worel
Documents
Files (5)
- Download
19AU9026Q0020_SOW_de.pdf
680 KBAdded in Solicitation version 3Posted - Download
19AU9026Q0020_Solicitation Doc.pdf
458 KBAdded in Solicitation version 3Posted - Download
19AU9026Q0020_SF-1442.pdf
197 KBAdded in Solicitation version 3Posted - Download
19AU9026Q0020_cover letter.pdf
563 KBAdded in Solicitation version 3Posted - Download
19AU9026Q0020_SOW_en.pdf
608 KBAdded in Solicitation version 3Posted
Lifecycle
- 3Version 3SolicitationArchivedCurrent
Basketball court reconstruction
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
EVENT DETAILS: Date: 3 December 2026 Time: 0930-1430 PT Format: Presentation & Site walk Registration Due Date: 23 November 2026, 1200 PT; Please register by returning completed Request for Visit Authority (RVA) by email to: Sarah Malowicki, Project Manager, at sarah.m.malowicki@usace.army.mil, AND Londres Medranda, Contract Specialist, at londres.medranda@usace.army.mil. Confirmation email will be sent upon receipt of completed RVA. Who Should Attend: Interested vendors, including small businesses, large businesses, and other industry partners. Attendance is limited to 2 personnel per company. Attendance is limited to United States Citizens. Attendance at this event is not mandatory. Pre-registration is required. DESCRIPTION: In accordance with the Revolutionary Federal Acquisition Regulation Overhaul (RFO) 15.101(a) Early exchanges with industry, the United States Army Corps of Engineers (USACE), Seattle District (NWS) is hosting an Industry Day on 3 December 2026 at Chief Joseph Dam in Bridgeport, Washington. This Industry Day provides an opportunity for interested parties to inspect the existing 15.5KV Main Unit XJ Breaker disconnects first-hand. By hosting this first-hand inspection, the government aims to gather technical feedback and explore industry alternatives for modernizing this equipment. We are seeking input from qualified, experienced sources, capable of performing this modernization work. PROJECT BACKGROUND: At Chief Joseph Dam the current Unit 1-16 XJ Breaker disconnects are original BBC (Brown Boveri Corporation) equipment and rated 6000A according to the BBC shop drawings. The switch operators are pneumatically driven, and are actuated by operation of a complex key interlocking scheme with the circuit breaker. The load side and source side disconnects are mechanically linked and simultaneously operated by a single shared pneumatic actuating system. The current Units 17-27 breaker disconnects are original GE equipment. The load side and source side disconnects are mechanically linked and simultaneously controlled by mechanically operated hand crank. USACE is evaluating options to improve reliability, maintainability, remote-operating capability, and overall generating-unit availability. • Option 1: Refurbish and restore existing disconnect switches to an approved condition equivalent to original design intent, as technically feasible. Integrate motorized mechanisms on the switch arms to enable remote operation, and comprehensively overhaul and test the existing main unit breakers to ensure optimal system protection. • Option 2: Replace the disconnect switches with new electrically operated units and refurbish the existing breakers. • Option 3: Replace both the disconnect switches (with new electrically operated units) and the main unit circuit breakers. • Option 4: Replace the entire switchgear assembly with new enclosures, modern electrically operated disconnect switches, and new circuit breakers (includes associated controls, protection, buswork and new enclosure). Chief Joseph Dam has several critical limitations that affect this project, primarily related to space constraints. This Industry day will present the options under consideration, obtain industry feedback on technical feasibility and constructability, and identify potential risks, constraints and cost drivers. USACE is requesting feedback on the following questions and relevant, non-binding information: Does your company have the ability, capacity, interest and willingness to perform the proposed options? Does your company have experience with comparable medium-voltage/high-current generation-station disconnect and breaker modernization projects? We are not currently requiring quotes or bids, however rough estimates would be greatly appreciated. Recommended technical approaches or alternatives Major schedule outage, access, safety, supply-chain or constructability risks. Do you believe all aspects of this requirement could be successfully performed by the small business sector under NAICS 237990 (Size standard $45M)? (Yes/No). If No, what estimated percentage do you think can be subcontracted out to small business? Small Business (SB) ______% Small Disadvantaged Business (SDB) ________% Woman-Owned SB (WOSB) _______% Veteran Owned SB (VOSB) _______% Service Disabled VOSB (SDVOSB) _______% Historically Underutilized Business Zone (HUBZone) _______% Important Notice: Attendance and participation is not required for consideration on future contracts related to this work. The U.S. Government is not obligated to pay for any information, documentation, demonstrations, or data provided, nor will it reimburse any costs incurred by your organization in preparing responses, traveling to, or participating in this Industry Day and physical equipment inspection. All costs associated with attending this event and participating in this information exchange are solely at the responding party’s expense. Small Business Program Inquiries: Enshane Hill-Nomoto: Enshane.Nomoto@usace.army.mil https://www.nws.usace.army.mil/Business-With-Us/Small-Business/ Thank you for your interest in this USACE project. | 47% | Special Notice | 11/23/2026 |
Northwest Division Powerhouse Life Safety Upgrades Stage 1 The U.S. Army Corps of Engineers (USACE), Walla Walla District, intends to issue a single-phase solicitation on or about 30 November 2026 for a Construction Indefinite-Delivery, Indefinite-Quantity (IDIQ) Multiple-Award Task Order Contract (MATOC). The anticipated MATOC will provide construction services for renovation and upgrade projects at hydroelectric powerhouses located at large, remote civil works projects within the Northwestern Division. The primary area of performance is anticipated to include USACE Walla Walla District projects at McNary, Ice Harbor, Lower Monumental, Little Goose, Lower Granite, and Dworshak. Task orders may also include work at other USACE projects within the Pacific Northwest, including locations within the Seattle and Portland Districts in Washington, Oregon, Idaho, and Montana. The U.S. Army Corps of Engineers, Walla Walla District, anticipates awarding up to four (4) IDIQ MATOCs. At least one, and up to two, MATOCs will be reserved for award to qualified small business concerns. Task orders issued under the MATOCs will be firm-fixed-price. The aggregate shared contract capacity for all awarded MATOCs is anticipated to be $99 million. Each contract is anticipated to include a 36-month base period and two (2) 24-month option periods, exercisable at the Governments discretion. The Government may issue individual task orders with values up to $25,000,000. The Government reserves the right to issue additional solicitations and award additional contracts for the same or similar work within the geographic area covered by the MATOCs. The applicable North American Industry Classification System (NAICS) code is 237990, Other Heavy and Civil Engineering Construction. This notice is for informational purposes only and is not a solicitation. The solicitation is anticipated to be issued on or about 30 November 2026. Summary Scope of Work: The purpose of this IDIQ MATOC is to provide construction services to renovate and upgrade life-safety systems at large hydroelectric powerhouses located at large, remote civil works projects. These powerhouses may range in size from 75,000 square feet to 420,000 square feet and from 5 stories to 11 stories. The work may consist of the following major industrial construction elements for installation and/or modification: 1. Fire detection and mass notification alarm systems 2. Wet pipe, fine water mist, and clean agent sprinkler fire suppression system(s) 3. Smoke control system, including stair pressurization fans, smoke exhaust fans, motorized fire-smoke dampers, and complex logic and programming matrix digital controls 4. HVAC direct digital controls 5. HVAC ventilation and conditioning equipment, dampers, and ductwork 6. Fabricated steel stairs and guardrails 7. Architectural fire barrier walls, fire doors, safety glazing and finishes 8. Firestopping 9. Emergency and exit lighting systems 10. Electrical power supply and distribution 11. Precast concrete 12. Low-slope roofing 13. Specific aspects of this project that may be especially challenging include: a. Robust industrial safety protocols with rigorous lockout tagout procedures b. Construction in a continuously operating industrial environment c. Proximity to high voltage equipment and transmission lines d. Multiple underground levels with limited access e. Fire alarm designers and installers must be NICET Level III or IV certified f. Work in ceilings up to 60 feet high The project will involve the development and management of Contractor furnished submittals for items such as shop drawings, product data, commissioning plans, and contract close-out documentation as required by technical specifications of the task orders. Miscellaneous work within the project includes the delivery of Record Drawings. Placement of Task Orders. The actual amount of work to be performed and the time of such performance will be determined by a Contracting Officer who will issue written task orders. Prices will be requested and evaluated for each task order in accordance with FAR 16.505. The Government will evaluate price and past performance at a minimum but may include additional non-price factors. Each RFP will state the method of selection and any additional non-price factors. Whenever possible, award will be made without discussions. If discussions are required, each contractor included in the competitive range will be requested to provide a final proposal revision, unless eliminated from discussions. Important Note: The sam.gov response date listed elsewhere in this synopsis is for the sam.gov archive purposes only. It has no relationship to the actual proposal submission date. The proposal submission date will be contained in the solicitation and any solicitation amendments that are issued. When issued, the solicitation documents for this project will be available via sam.gov. No CDs OR HARD COPIES WILL BE AVAILABLE. Offerors are responsible for checking the reference page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for an offerors inability to access the document(s) posted at the referenced website. To obtain automatic notifications of updates to this solicitation, you MUST log in to sam.gov and add the solicitation to your watchlist. If you would like to list your firm so others can see you are an interested vendor, you must click the Add Me To Interested Vendors button in the listing for this solicitation on sam.gov. | 47% | Pre-Solicitation | 01/08/2027 |
The U.S. Army Corps of Engineers (USACE), Portland District is hosting a two-hour virtual industry event at 0900 hours on 16 December 2026 to provide a project update and to gather industry input as it evaluates project construction risks, industry capabilities, and strategies for the project below. For those interested in seeing the project site in person, a site visit will be arranged for 15 December 2026. That site visit will start at 0900, and the site is located at 11285 Sprit Lake Hwy Toutle WA 98649. Firms who respond to this announcement with completed RSVP and Survey form will be provided further details for the site visit, if interested, and a link to the virtual meeting. The Government will provide the presentation slides following the event. It is also requested that each firm provide responses to a questionnaire to be launched at the conclusion of the event. Responses will be considered for use in the solicitation development. | 47% | Special Notice | 12/11/2026 |
Please see attachments. | 47% | Solicitation | 11/20/2026 |
JP Murtha Float Mooring Bitts Retrofit - The United States Army Corps of Engineers, (USACE) Pittsburgh District has a requirement for the retrofitting of existing hydraulic structures within an active navigation lock. The Prime Contractor must be capable of executing complex in-the-wet construction, specifically: The John P. Murtha Floating Mooring Bitt Retrofit consists of the installation of Government furnished Floating Mooring Bitts into Contractor fabricated embedded frame on the existing River Chamber Middle Wall. In-the-wet construction methods are required. Design, fabrication, and installation of two dewatering boxes are required for installation of the Floating Mooring Bitts. Removal or alterations to existing work in such a manner as to prevent injury or damage to any portions of the existing work which remain. Repair or replace portions of existing work which have been altered during construction operations to match existing or adjoining work, as approved by the Contracting Officer. At the completion of operations, existing work must be in a condition equal to or better than that which existed before new work started. To achieve this Requirement the Contractor must: a. Floating Plant Operations: Providing, operating, and mooring a fully compliant floating plant (crane/deck barge and push boat) in an active river chamber in accordance with EM 385-1-1. b. Dewatering Box (Cofferdam): Fabricating, installing, and sealing structural steel dewatering boxes against lock monoliths for a strict maximum duration of 90 days. c. Heavy Demolition and Concrete Work: Executing concrete wire-sawing, core drilling, and demolition of existing lock wall recesses, followed by cast-in-place concrete integration. d. Structural Steel and Mooring Bitts: Fabricating heavy steel embedded anchorage frames, and salvaging/installing Government-Furnished Floating Mooring Bitts. e. Commercial Diving: Providing certified commercial dive teams to support underwater inspection, rigging, and cofferdam sealing. The work shall be completed within 730 calendar days after written Notice to Proceed. This acquisition will be procured as an Unrestricted Full and Open Solicitation. The resulting award will be for one (1) Firm-Fixed-Price (FFP) Construction Contract. All responsible Bidders are encouraged to participate. The Invitation for Bid (IFB) will be issued on or about 15 September 2026, online through Procurement Integrated Enterprise Environment (PIEE) which posts the opportunity to SAM.gov; therefore, requests for hardcopies of the solicitation will not be honored. .The North American Industrial Classification System (NAICS) for this procurement is 237990 - Other Heavy and Civil Engineering Construction and the small business size standard is $45Million.In order to submit a Bid on this project, your company must-1) Be registered in System for Award Management (SAM) and maintain an active registration status. 2) Be registered in the Procurement Integrated Enterprise Environment (PIEE) for the Solicitation Module with the PROPOSAL MANAGER role. System for Award Management (SAM) Registration. Registering in SAM.gov includes both entity validation and entity registration. To register in SAM: a. Navigate to SAM.gov b. Select Sign-In (top right) c. Select Create an Account then Follow the Instructions. d. After Account is Set-up, Select Sign In. e. Under the Entity Management widget, Select Get Started button. f. Select Register Entity. As part of entity registration, a Unique Entity ID will be assigned. For Additional Information on SAM To Register Your Entity (company), please visit https:/www.fsd.gov/gsafsd_sp?id=gsa_index . Here you will find the following, Get Started with Your Registration Check Registration Status ACTIVE, INACTIVE, PENDING Update Your Registration Become an Entity Administrator Validate Your Entity *Access User Guides *By selecting this option, you can obtain a Quick Start Guide for Contract Registrations. Also, here you will find in addition to the User Guides - FAQs, Videos, and Definitions. PLEASE NOTE It is mandatory that all companies be registered in SAM in order to receive federal contracts. There is no charge to register or maintain your company (entity) registration.Login.gov manages usernames and passwords for SAM.gov. *Important* Registration Information Registration can take at least ten (10) business days to be active in SAM.gov. Registration must be in active status upon offer submission and remain active during award period. Registration must be renewed every 365 days to remain active. The Federal Service Desk (FSD) for SAM questions, may be contacted. Phone Number: 866-606-8220 Hours of Operation: Monday-Friday 8 a.m. to 8 p.m. ET Procurement Integrated Enterprise Environment (PIEE) Solicitation Module Registration To register for PIEE follow the below instructions. Register in PIEE: a. Navigate to https://piee.eb.mil/ b. Select Register [top right] c. Select Vendor d. Create a User ID and Password and follow the prompts [next] e. Create Security Questions [next] f. Complete your User Profile Information [next] g. Complete your Supervisor or Approving Official Information [next] h. Complete Roles i. Step 1. Select SOL-Solicitation ii. Step 2. Select Proposal Manager iii. Step 3. Click Add Roles iv. Step 4. Fill in your Location Code (CAGE Code) [next] i. Provide a justification for your registration [next] j. Follow the remaining prompts to submit your registration The Procurement Integrated Enterprise Environment (PIEE) help desk may be reached by calling telephone number 866-618-5988 for assistance. | 47% | Solicitation | 11/12/2026 |
Additional Details
Solicitation Number
19AU9026Q0020
Archive Date
Sep 8, 2026
Place of Performance Country
AUT
Office Address
WASHINGTON, DC, 20520