GovChime
Notice ID: 7c80ec0addda44b1abee9139fba12d08Presolicitation

Engineering/Installation/Construction Services of New Main Generator U.S. Embassy Riyadh, Saudi Arabia

Archived. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
3:00 PM UTC+01:00
Posted
December 5, 2022
Notice type
Presolicitation
NAICS
237130: Power and Communication Line and Related Structures Construction
Agency
Department of State

Notice details

Office
ACQUISITIONS - RPSO FRANKFURT
Place of performance
Riyadh
Last updated
Dec 4, 2025

Identifiers

Solicitation number
19GE5023R0011
Notice ID
7c80ec0addda44b1abee9139fba12d08

Description

The United States Department of State (DOS) Bureau of Overseas Buildings Operations (OBO) on behalf of the American Embassy Riyadh, Saudi Arabia requires engineering and construction services to include among other construction activities, the furnishing all labor, equipment, materials, and tools for to supply and install a UL Listed Standby Diesel Generator 1100kW,1375kVA, 480/277V, 60Hz, Manufacturer: equal to Caterpillar C32 model or higher specifications, including Battery Charger, Jacket Water Heater, Generator Control Panel, Generator Set Enclosure, Double Wall Cylindrical Diesel Tank 3000 Liters Capacity, Black Steel Pipes ERW Schedule 40, including all Power and Control Cables, Earthing and Grounding System and Concrete Foundations.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:19GE5023R0011
  1. Pre-Solicitation

Formal solicitation typically follows within 30–60 days. (estimate)

  1. Pre-SolicitationCurrentDec 5, 2022

    Engineering/Installation/Construction Services of New Main Generator U.S. Embassy Riyadh, Saudi Arabia

    Notice 7c80ec0addda44b1abee9139fba12d08 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The U.S. Consulate General Cape Town hereby issues Amendment 0001 to provide responses to questions received from prospective offerors regarding the CCTV/Perimeter Security Trenching Works solicitation. The Questions and Answers (Q&A) document is attached for review. The quotation submission deadline has been extended to Thursday, November 5, 2026, at 10:00 AM South African Standard Time (SAST). All other terms and conditions of the solicitation remain unchanged, except as expressly amended.
-Special Notice11/05/2026
1. General Summary of Services Required The U.S. Consulate General Cape Town invites qualified contractors to submit quotations for trenching, underground conduit installation, handhole installation, extension of thirteen (13) existing perimeter fence posts for security camera installation, and associated civil works at the U.S. Consulate compound in Cape Town. The contractor shall provide all labor, supervision, contractor-furnished materials, equipment, tools, transportation, safety measures, and incidentals necessary to complete the work in accordance with the attached Scope of Work and Design Layout Package, Cape Town–PME–26004, 100% Design, dated July 21, 2026, and the additional requirements identified in this solicitation. Work includes, but is not limited to: Site preparation, excavation, and trenching along designated routes. Installation of underground conduits, handholes, and associated infrastructure. Protection of existing underground utilities and surrounding infrastructure. Backfilling, compaction, and reinstatement of disturbed surfaces. Site safety, waste removal, and final cleanup. Extension of existing perimeter fence posts at thirteen (13) designated locations to accommodate the installation of new security cameras. Government-Furnished and Contractor-Furnished Materials The U.S. Government will provide the conduits and handholes required for the trenching works. The contractor shall provide all remaining materials, including sand, soil, gravel, backfill materials, and other consumables necessary to complete the installation. The contractor shall also provide all labor, supervision, tools, equipment, transportation, and incidentals necessary to install the Government-furnished conduits and handholes. Perimeter Fence Post Extensions – 13 Locations In addition to the trenching works, the contractor shall extend the existing perimeter fence posts at thirteen (13) designated locations to accommodate new security cameras. The contractor shall provide all materials, labor, equipment, tools, and incidentals necessary to complete this work. The attached reference photographs illustrate examples of the required fence post extensions. Contractors shall review these photographs and assess the work during the site visit. Any clarification regarding the required extensions must be requested before the clarification closing date. Both the trenching works and the thirteen (13) fence post extensions must be included in the contractor's total firm-fixed-price quotation. The attached Scope of Work and Design Layout Package governs the technical requirements for the work described therein, supplemented by the additional requirements expressly identified in this solicitation. Contractors are responsible for reviewing the complete package and including all necessary costs in their quotations. 2. Contract Details and Evaluation The Government intends to award a firm-fixed-price purchase order to the responsible offeror submitting the lowest-priced technically acceptable (LPTA) quotation. Technical acceptability will be evaluated on a Technically Acceptable / Not Technically Acceptable basis against the following minimum requirements: Technical Approach: Demonstrated understanding of the Scope of Work and Design Layout Package and a practical methodology for completing the requirement. Relevant Experience: Evidence of at least two comparable completed trenching, underground utility, or civil construction projects, supported by contactable references. CIDB Registration: Active registration with the Construction Industry Development Board (cidb), with a minimum grading designation of 3 in the applicable class of construction works. Professional Engineering Qualifications: Employment of a Civil Engineer or Professional Engineering Technologist registered with the Engineering Council of South Africa (ECSA). Site Manager/Engineer Experience: Demonstrated recent experience supervising setting out, trenching, shoring, dewatering, steel fixing, formwork, concrete placement, and piping/conduit installation. Personnel and Resources: Availability of appropriately qualified personnel, equipment, and resources to complete the work. Project Schedule: Demonstrated ability to complete the work within the required timeframe. Health and Safety: Adequate preliminary safety methodology addressing the applicable construction and excavation hazards. Scope Compliance: Confirmation that the quotation covers the complete Scope of Work and Design Layout Package without material exclusions or deviations. Only technically acceptable quotations will be considered for award based on price. The Government may award based on initial quotations without discussions. 3. Interested Vendors / Mandatory Site Visit Interested contractors must possess the necessary construction experience, professional qualifications, registrations, equipment, and resources to complete the requirement. A mandatory site visit will be conducted as follows: Date: Tuesday, October 27, 2026 Time: 10:00 AM SAST Location: U.S. Consulate General Cape Town Attendance Confirmation Deadline: Friday, October 23, 2026 Prospective offerors must confirm attendance before the deadline and provide the full name, ID number, contact number, vehicle make, model, and colour of each representative attending. Contractors who fail to provide the required information by the deadline may be denied access to the compound. Attendance at the mandatory site visit is required for quotation eligibility. All technical questions must be submitted in writing by Friday, October 30, 2026 at 10:00 AM SAST . Official clarifications and amendments will be issued through SAM.gov, as applicable. 4. Proposal Submission Requirements Offerors must submit the following as part of their quotation: Company Profile: Brief company background and description of relevant construction capabilities. Relevant Experience: Details of at least two comparable completed projects, including project descriptions and contactable references. Technical Approach / Work Plan: Brief methodology demonstrating an understanding of the Scope of Work and Design Layout Package and the proposed approach to completing the work. Contractor Registration, Professional Qualifications and Experience: CIDB Registration: Proof of active cidb registration with a minimum grading designation of 3 in the applicable class of construction works. ECSA Registration: Evidence that the contractor employs a Civil Engineer or Professional Engineering Technologist registered with ECSA, including proof of current registration. Site Manager/Engineer: CV and supporting experience demonstrating recent supervision of setting out, trenching, shoring, dewatering, steel fixing, formwork, concrete placement, and piping/conduit installation. Project Schedule: Proposed commencement date, work duration, and completion period. Health and Safety: Preliminary site-specific safety methodology addressing the principal construction and excavation risks. The successful contractor shall submit a comprehensive site-specific safety plan before commencement. Completed Pricing Schedule: Detailed firm-fixed-price quotation using the attached pricing schedule, covering all labor, contractor-furnished materials, equipment, trenching, installation of Government-furnished conduits and handholes, backfilling, reinstatement, and associated costs. The quotation must also include a separately priced line item for extending the existing perimeter fence posts at thirteen (13) locations, inclusive of all required contractor-furnished materials, labor, equipment, and installation costs. Both the trenching works and fence post extensions shall be included in the total firm-fixed-price quotation. NDAA Compliance: Completed Express NDAA Certificate for Vendor Compliance. Defense Base Act (DBA) Insurance: The successful contractor shall be required to obtain and maintain Defense Base Act (DBA) insurance in accordance with the applicable U.S. Government contract requirements. Offerors must include the cost of DBA insurance in their quotation and separately identify the insurance premium under CLIN 0009 of the attached pricing schedule. This cost must be included in the total firm-fixed price. Proof of the required DBA insurance coverage must be provided before commencement of work. For information on obtaining DBA insurance, including a list of U.S. Department of Labor-authorized insurance carriers, please visit: https://www.dol.gov/agencies/owcp/dlhwc/lscarrier Pricing Requirements: The attached pricing schedule must be completed and submitted with the quotation. Quantities and unit rates must be provided for applicable work elements, with all costs included in the total firm-fixed price. Contractors must verify quantities against the Scope of Work and Design Layout Package and raise any discrepancies before the quotation closing date. Prices must be quoted in South African Rand (ZAR), with VAT separately identified. Any exclusions, assumptions, or deviations must be clearly identified. Material deviations may result in a quotation being determined technically unacceptable. The total price must cover the complete requirement, including all incidental work necessary for satisfactory completion. 5. Project Completion and Scope Control The contractor shall complete the work within 4-6 Weeks following the authorized commencement date. All construction activities, safety requirements, site protection, reinstatement, and completion obligations shall be performed in accordance with the attached Scope of Work and Design Layout Package and the resulting purchase order. Any unforeseen site conditions or proposed changes affecting the scope, price, or completion period must be promptly reported to the Government. No changes or additional work may proceed without prior written authorization from the Contracting Officer. 6. Quotation Submission Instructions Please note the following BEFORE submitting your offer: Solicitation Number: 19SF2027Q0001 Closing Date: Tuesday, November 3, 2026 at 10:00 SAST Submission Email: capetown_quotation@state.gov Questions Deadline: Friday, October 30, 2026 at 10:00 AM SAST All quotations and supporting documents must be submitted electronically and in English. The solicitation number must appear in the email subject line. The completed pricing schedule must accompany the quotation. Quotations must remain valid for at least 30 calendar days after the closing date. Offerors must complete the attached Express NDAA Certificate for Vendor Compliance. As a Diplomatic Mission representing the U.S. Government, the U.S. Consulate cannot sign vendor contracts, credit applications, or separate vendor terms and conditions. Any vendor terms or conditions inconsistent with the Government's solicitation or resulting purchase order shall not apply unless expressly accepted by the Contracting Officer. 7. Payment Terms The Government intends to award a firm-fixed-price purchase order covering the complete requirement. No adjustments will be made for material price increases or exchange-rate fluctuations after award, except as authorized under the resulting purchase order. Payment will be made via Electronic Funds Transfer (EFT) following satisfactory completion, Government acceptance, and receipt of a proper invoice, in accordance with the purchase order terms. Advance payments and deposits are not permitted. Note: Procurement will acknowledge receipt of quotations within four (4) business days. If confirmation is not received, offerors should contact Procurement before the quotation deadline to verify receipt.
-Solicitation11/03/2026
Amenment 0002: The purpose of this amendment is to cancel the solicitation on its entirety due to the change in scope of work. ============================== Amendment 0001: The purpose of this amendment is to extend the quotation deadline from 08 June 2026, 4:00 PM Kolonia time to 11 June 2026, 4:00 PM Kolonia time ============================== Dear Prospective Offeror: Subject: Request for Quotes 19FM2026Q0007 Enclosed is a Request for Quotes (RFQ) for the Rectification of Communication Infrastructure. If you would like to submit a quotation, follow the instructions in Section J of the solicitation, complete the required portions of the attached document, and submit it to the address shown on the Standard Form that follows this letter. The U.S. Government intends to award a contract/purchase order to the responsible company submitting an acceptable offer at the lowest price. We intend to award a contract/purchase order based on initial proposals, without holding discussions, although we may hold discussions with companies in the competitive range if there is a need to do so. Quotations are due by 08 June 2026, 4:00 PM Kolonia time. No quotations will be accepted after this time. Quotations must be in English and incomplete quotations will not be accepted. Your quotation must be submitted electronically to MRSSPROCUREMENT@STATE.GOV. It is important to make sure the submission is made in specific size and format; in MS-Word or MS-Excel or Adobe Acrobat (pdf) file format. The file size must not exceed 30MB. If the file size should exceed 30MB, the submission must be made in separate files and attached to separate emails with less than 30MB each. In order for a quotation to be considered, you must also complete and submit the following: 1.SF-18 2.Section A, Pricing 3.Section L Representations and Certifications 4.Additional information as required in Section J 5.Proof of SAM Registration By submission of its offer, the offeror represents compliance to NDAA section 889 52.240-90 Security Prohibitions and Exclusions Representations and Certifications 52.240-91 Security Prohibitions and Exclusions Offerors shall be registered in the SAM (System for Award Management) database at https://www.sam.gov prior to submittal of their offer/proposal as prescribed under FAR 4.1102. Failure to be registered at time of proposal submission may deem the offeror’s proposal to be considered non-responsible and no further consideration will be given. Therefore, offerors are highly encouraged to register immediately if they are interested in submitting a response to this requirement.
-Solicitation06/11/2026
Introduction: The U.S. Army Corps of Engineers, Japan District (POJ), is performing market research for an upcoming Design-Bid-Build (DBB) requirement entitled, “DLA DWCF B1907 Backup Power Generator, Yokosuka, Japan.". This announcement represents a market survey that is intended for planning purposes only. The purpose of this notice is to identify sources capable of performing this project and to receive responses from those firms to assist the Government's acquisition planning. This survey does not constitute a commitment by the Government for any follow-on announcements, solicitation, or award. This notice is NOT a solicitation. The Government will not pay for any information provided as a result of this market survey. This market survey is intended for local sources only. Local sources are those sources physically located and licensed to conduct business in Japan. Firms interested and capable of performing this work are highly encouraged to submit a response (submission requirements are located within this notice). We are committed to partnering with industry as much as we can throughout this process and therefore encourage all interested companies to respond to this sources sought. Market research and industry feedback is an essential part of the acquisition process. The information requested in this announcement will be used within POJ to facilitate decision-making and will not be disclosed outside the agency. However, respondents submitting business information pursuant to this announcement should consult 41 C.F.R. parts 105-60 and other implementing regulations concerning the release of such information to third parties under the Freedom of Information Act (FOIA). All information submitted by respondents that they consider confidential and not releasable to third parties outside of USACE, and its employees, agents, consultants, and representatives, must be clearly and conspicuously marked. SYSTEM FOR AWARD MANAGEMENT (SAM) All interested companies, including joint ventures, shall be registered in the SAM database in order to be eligible for award of Government contracts. https://www.sam.gov LOCAL SOURCES Firms which have not done business with U.S. Army Corps of Engineers, Japan Engineering District, are requested to visit the following website: https://www.poj.usace.army.mil/Business-With-Us/ for general information. This contract will be performed in its entirety in the country of Japan and is intended only for local sources. Only local sources will be considered under this solicitation. Local sources are sources (e.g. corporations, partnerships, or Joint Ventures [For a Joint Venture, the Joint Venture as an independent entity must satisfy the local source requirements or, in the alternative, each member of the Joint Venture must individually satisfy the local source requirements]) that are physically located in Japan and authorized (i.e. licensed and registered) to perform construction in Japan. Specifically, a prospective offeror must be duly authorized to operate and conduct construction business in Japan and must fully comply with all applicable laws, decrees, labor standards, and regulations of Japan during the performance of the resulting contracts. In addition, offerors must possess a Japanese civil construction (doboku isshiki koji) license or Japanese architectural construction (kenchiku isshiki koji) license by the proposal due date and time. The U.S. Government will verify that the offeror has the license through the Ministry of Land, Infrastructure, Transport and Tourism (MLIT) website at https://etsuran2.mlit.go.jp/TAKKEN. It is the responsibility of the offeror to ensure that it has the license (Japanese civil construction or Japanese architectural construction), and that it is accurately shown on the MLIT website, by the proposal due date and time. Failure to comply with this requirement will be cause for rejection of your offer. The U.S. Government will not offer “United States Official Contractor” status under Article XIV of the US-Japan Status of Forces Agreement (SOFA) to U.S. contractors normally resident in the United States; nor will the U.S. Government certify employees of such contractors as “Members of the Civilian Component” under Article I(b) of the SOFA. PROJECTS INFORMATION: Project Title: DLA DWCF B1907 Backup Power Generator Project Location: Yokosuka Japan Project FSC: Y1MZ - Construction of EPG (Electric Power Generation) Facilities—Other, Including Transmission Project NAICS: 237130 - Power and Communication Line and Related Structures Construction Project Magnitude: Between ¥500,000,000 and ¥2,000,000,000 (Japanese YEN) Project Description: Design-Bid-Build. Install a backup generator to support the mission at Building 1907. The new backup generator is expected to provide backup power to B1907 for the next 10 years at minimum. The generator has been sized to handle the following planned future loads: five new VLMs assumed to be rated the same as the existing VLMs(total of ~45 kW), operation of all four existing conveyor elevators (currently only two are operational at this time; two conveyors are fed from a 200A @ 210V, 3ph/3w feed), and an expected 20% increase in loads for the server rooms (total of ~20 kW). Anticipated Period of Performance: 518 Calendar Days Procurement Method: The Government intends to issue an Invitation for Bid (IFB) Solicitation. The Government anticipates that a solicitation will be issued approximately in May 2027. This survey does not constitute a commitment by the Government for any follow-on announcements, solicitation(s), or award(s). Any solicitation(s) pursued will be intended for local sources only. Local sources are those sources physically located and authorized to perform construction work in Japan. Draft plans and specifications are being provided for INFORMATIONAL PURPOSES. Offerors are cautioned that these drawings and specifications are in DRAFT FORMAT. ========================================================================== REQUESTED INFORMATION Interested firms are requested to reply with the following information no later than 11 December 2026 Japan Standard Time. Please submit your responses via e-mail to Mr. Ryan Marzetta, Contracting Officer at ryan.j.marzetta@usace.army.mil and Mr. Jiro Miyairi, Contract Specialist at jiro.miyairi@usace.army.mil Name of your company, address, phone number, email, SAM UEI, CAGE Code, and English Speaking Point of Contact (POC) name. Does your company have CMMC certification? If yes, what level and when does it expire. Identify your current construction bonding levels: a. Single Contract Amount b. Aggregate Maximum Contract Amoun c. Name of Sureties Identify which project(s) your firm is interested in and describe your firm's interest, capability and experience relative to the work described in the interested Project Description. Please provide at least one (1) project, but no more than three (3) projects, that is comparable to this project your company has completed (for government or commercial customers) in the past six (6) years. a. Project Title and Location b. Customer/Agency c. Project Value and Brief Description d. Date Completed or Percent Complete e. Your role (Prime, Subcontractor, Designer of Record, Joint Venture, etc) Technical Questions a. Does the Period of Performance seem reasonable? If not, provide what your company believes to be the Period of Performances (PoP) for the project. b. Are you expecting any long lead items? If so, which items and how long will it take to procure. c. Will a 1100 KVA package unit generator readily available in Japan. Will it need to be custom made? Do you have any other concerns related to the Draft technical specifications and drawings? Are there any other comments or suggestions that may increase your interest? Additional Info: U.S. Army Corps of Engineers, Japan District, Camp Zama, Japan Contracting Office Address: USACE District, Japan Attn: CEPOJ-CTN Unit 45010 APO, AP 96343-5010 Points of Contact: Jiro Miyairi 046-407-8837 jiro.miyairi@usace.army.mil Ryan Marzetta 046-407-8725 ryan.j.marzetta@usace.army.mil
-Market Research12/11/2026
This is a request for information (RFI) for market intelligence and for informational purposes only. This announcement does not constitute a solicitation or a request for proposal (RFP), and no solicitation is currently available. Participation in this RFI is strictly voluntary. The Government will not be obligated to award any agreement or contract because of this RFI, nor will it reimburse respondents for any costs associated with the preparation or submission of information. Submitting a response will not affect a firm’s ability to submit a proposal should a formal solicitation be issued in the future. Please note that while Other Transaction Authority is not subject to FAR based small business regulations, this NAICS code is provided for market research to help the Government understand the size and demographics of the interested industrial base. PROGRAM/PROJECT OVERVIEW: The U.S. Air Force 377th Contracting Division has a requirement to execute the construction and technical redesign requirements for the demolition of three substations and new construction of two upgraded substations. The services requested will include new 12.47 kV distribution systems. The primary purpose and objective of these projects are to rapidly upgrade the existing infrastructure, meet standards, enhance operational efficiency, and ensure compliance with regulatory guidelines. The Government is evaluating the feasibility of executing these requirements under one award via Progressive Design-Build (PDB) utilizing an Other Transaction (OT) Agreement under the statutory authority of 10 U.S.C. § 2808a. Summaries of projects for this acquisition strategy are as follows: - MHMV200009 – Repair Substation 9 and Feeders: The primary objective of the Repair Substation 9 and Feeders project is to design and construct a fully operational, modern power distribution asset, upgrading the existing infrastructure to meet standards, enhance operational efficiency, and ensure compliance with regulatory guidelines. This goal will be achieved by establishing the new substation facility within a defined 100ft x 150ft footprint directly south of the existing location, and installing all-new substation components, security fencing, distribution poles, switching gear, and conductors. The project also aims to complete the systematic teardown and removal of all retired infrastructure to restore the original site. - MHMV 120009 – Remove Substation 23 & Connect Loads to Substation 24A Feeder 5: The project entails the design and construction services required to remove Substation 23 & connect loads to Substation 24A Feeder 5 located on KAFB. The primary purpose and objective of this project is to upgrade the existing infrastructure of Substation 24A Feeder 5 to meet standards, enhance operational efficiency, and ensure compliance with regulatory guidelines. - MHMV080002 – Demo Substation 3, Rebuild Substation 10 and Distribution System: The primary goal of the Demo Substation 3, Rebuild Substation 10 and Distribution System project is to safely decommission and demolish Substations 3 and 10 and design, construct, and commission a modern, consolidated Substation 10 rated at 10,000 KVA (10/12/14 MVA). This infrastructure upgrade will replace aged, unserviceable assets with a resilient, high-capacity substation and an underground distribution backbone designed to eliminate single points of failure and modernize base electrical infrastructure. Included in this notice are the attachments of the Scope of Services with technical documents for more detailed information on the nature of the work. INFORMATION REQUESTED: Interested industry partners are requested to respond to the following questions to help shape the final acquisition strategy. Please limit your responses to no more than 5-pages addressing the following questions – - Company Profile: Business Name Address Point of Contract (Name, Title) Phone Number Email Address Cage Code & UEI - Relevant Experience: Please provide your relevant experience as it relates to performing multiple project in similar size, scope, and complexity to this requirement. Summarize performance clearly and factually, along with project locations and the projects customer(s). Do not submit proprietary trade secrets, protected technologies, or classified information in your response. All feed-back received will be handled as public market research to shape the Government's final acquisition approach. - Feedback on the Acquisition Strategy & Alternatives: OTA Experience – Describe your firm’s previous experience, if any, executing projects utilizing OTA. What project characteristics make PDB OTA particularly advantageous or disadvantageous for this requirement? Describe your experience executing Progressive Design-Build, Construction Manager at Risk (CMAR), or other highly collaborative delivery methods where designer and builder worked collaboratively with the owner before locking in a Guaranteed Maximum Price (GMP). Does the proposed PDB-OTA strategy incentivize your firm to participate? Why or why not? Are there alternative acquisition strategies, commercial phasing arrangements, or risk-sharing terms that the Government has not considered that would yield a higher quality facility, faster delivery, or lower cost? The Government welcomes candid industry feedback and recommendations regarding commercial practices, agreement terms, project phasing, risk sharing, governance, pricing approaches, and other considerations that could improve successful execution of these projects under 10 U.S.C. § 2808a. Interested firms are encouraged to add themselves to the Interested Vendors List associated with this announcement on SAM.gov to receive future updates. Please submit your responses to the Government Point of Contact listed below by the response date listed.
-Market Research11/19/2026

Additional Details

Solicitation Number

19GE5023R0011

Archive Date

Not specified

Place of Performance Country

SAU

Office Address

WASHINGTON, DC, 20520