GovChime
Notice ID: fbe13fa9db2a4c929ec7b808a222fbeeSpecial Notice

Notice of Intent to Single Source

Archived on November 9, 2023. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
11:00 AM UTC−08:00
Posted
October 25, 2023
Notice type
Special Notice
NAICS
334516: Analytical Laboratory Instrument Manufacturing
Agency
Department of CommerceNATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION

Notice details

Office
DEPT OF COMMERCE NOAA
Last updated
Sep 25, 2026

Identifiers

Solicitation number
2024-005
Notice ID
fbe13fa9db2a4c929ec7b808a222fbee

Description

NOTICE OF INTENT TO AWARD SOLE SOURCE: Pursuant to FAR Subpart 13.106-1(b)(1), the National Oceanic and Atmospheric Administration (NOAA), National Marine Fisheries Service (NMFS), NorthWest Fisheries Science Center (NWFSC) and the Office of Management & Budget Field Delegates intends to negotiate on a sole source basis with Loligo Systems, Toldboden 3, 2d floor, DK-8800 Viborg, Denmark for single award for the purchase of Loligo Systems swimming respirometers as required to conduct experiments for steelhead listed as Threatened under the U.S. Endangered Species Act. The swimming respirometers are essential to the Government’s requirements because no other equipment is 100% compatible with our existing systems and software and would allow us to collect oxygen consumption data for free swimming fishes or assess swimming performance simultaneously. If we do not obtain swimming respirometers and accessories from Loligo Systems, we will not be able to conduct the required experiments on swimming performance and metabolism of hatchery steelhead trout required for steelhead listed as Threatened under the U.S. Endangered Species Act. The required supplies must be compatible in all aspects (form, fit, and function) with existing systems or equipment, and the source is uniquely qualified to meet the requirement. The 5L and 10L swimming respirometers must be compatible with our existing optical fluorescence based oxygen meters, Bluetooth power strips, and PC based AutoResp3 software that controls current velocity, collects oxygen consumption data, and analyzes data to derive metabolic parameters. All of our existing respirometry equipment was supplied by Loligo Systems, and there are no other vendors producing equipment compatible with our existing equipment. Purchasing swimming respirometers compatible with our existing oxygen meters and software is essential and allows us to interface with our existing technology at a cost savings to the Federal government instead of having to purchase new oxygen meters, power switching devices and software to operate them and automate data collection. Other companies do not produce respirometers that are properly sized for our research requirements. Other companies produce swim tunnels, which do not have the ports needed for oxygen and temperature sensors required for respirometry. We could not modify the swim tunnels to include measurement ports for sensors and ensure the functionality of the equipment. Beyond the size differences and modification issues, the other vendors do not offer methods to control the current velocities in the swim tunnels that are compatible with our existing software and Bluetooth control systems. Loligo® Systems have no authorized distributors. Hence, they deal directly with customers from all territories, and only authorized staff from Loligo® Systems in Denmark can carry out any technical support, service, or repairs. Therefore, no other company could supply the Government’s need for these products. The North American Industry Classification Code (NAICS) for this acquisition is 334516 with a business size standard of 1,000 employees. This notice is not a request for quote/proposal and no solicitation will be issued. A determination by the Government not to compete the proposed procurement based upon responses to this notice is solely within the discretion of the Government. Any response to this notice must show clear and convincing evidence that demonstrates their products capabilities and specification. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement in the future. Information can be sent to Contracting Officer, Suzanne Johnston at Suzanne.Johnston@noaa.gov. No telephone or facsimile requests will be accepted. This procurement will be prepared in accordance with FAR Part 13, using Simplified Acquisition Procedures and has an estimated value under $150,000.00.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

Solicitation:2024-005
  1. Special NoticeCurrentOct 25, 2023

    Notice of Intent to Single Source

    Notice fbe13fa9db2a4c929ec7b808a222fbee on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
-Market Research11/20/2026
Sources Sought Notice for Graphite Furnace Atomic Absorption Spectrometer Notice ID: NIST-MML-FY27-SS01 Response Date: 11/28/2026 Product Service Code (PSC): 6640 NAICS Code: 334516 Background The Inorganic Chemical Metrology Group (ICMG) uses at least two measurement methods, each based on orthogonal physical principles, to certify the trace elements in candidate standard reference materials (SRM). These SRMs are intended for method validation and quality assurance in trace-element measurements to assess the nutritional value and contaminant status of agricultural products. A sensitive trace-element detector, a graphite furnace atomic absorption spectrometer (GFAAS) is sought to complement the group's inductively coupled plasma mass spectrometric (ICP-MS) measurement capability and fulfill the two independent method requirements for SRM development. Consideration will be given to GFAAS capable of direct solid-sample analysis to maximize its orthogonality relative to the liquid-sampling-based ICP-MS technique. Minimum Capabilities that NIST Requires and for Which Information is Being Requested The National Institute for Standards and Technology (NIST) located in Gaithersburg, MD is seeking information on vendors that are capable of providing a graphite furnace atomic absorption spectrometer (1) capable of measuring liquid test samples with an instrument detection limit (DL) for Cu at 0.02 µg/L or better (324.8 nm line, 50 µL sample volume, DL=3 x standard deviation of 10 replications) and (2) designed for direct introduction of solid state test samples into the graphite furnace for analyte quantification without a need of sample digestion Instructions for Responding to This Notice Parties that respond to this Notice are requested to submit the requested information via email in Microsoft Word, Adobe PDF, and/or Microsoft Excel format to the designated point(s) of contact whose name and email address appears at the bottom of this notice. Please provide only the information requested by this Notice, and do not include proprietary, classified, confidential, or sensitive information in a response to this Notice. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Information Requested in Response to This Notice: To help NIST with its market research, NIST is requesting that industry sources carefully review this notice and any attachments to it and voluntarily provide the following information: Company Summary Notice Identification: Notice ID and Title of this posting. Corporate Details: Company name, physical address, website address, and Unique Entity Identifier (UEI). Point of Contact (POC): Name, phone number, and email address. Company Size Standard: Your company’s size status relative to the NAICS code provided in this Notice. (Refer to the SBA Table of Small Business Size Standards). System for Award Management (SAM) Registration: Indicate whether your company has an active registration for procurement purposes in SAM.gov. Review the information included with this Notice, indicate whether there is anything that may inadvertently exclude domestically manufactured (made in the U.S.A.) end products from being considered; and indicate if anything included with this Notice could potentially be revised to improve the ability for domestic (“Made in America”) end products to be considered; and if a domestic end product is not currently available to meet the draft requirements/minimum specifications, please provide an estimated timeframe for when it may be domestically produced in the USA in the future if that appears to be likely. Information Regarding Commercial Products and Related Commercial Services Provide specifications, company name of the original equipment manufacturer, and the country of manufacture for commercial products and/or commercial services that your company is legally authorized to sell and that may meet NIST’s minimum requirements. Standard Commercial Pricing: Provide your company’s standard commercial pricing information for the requirements described in this Notice (including any Attachments) and explain what is included in those standard commercial prices. Estimated Price Range: You may provide an estimated price or estimated price range for the draft requirements included in this notice, including a brief explanation of how it was derived. Standard Commercial Terms and Conditions: Provide a copy of the standard commercial terms and conditions for the commercial products and/or commercial services identified in your company’s response to this Notice, including the nature and the duration of applicable standard commercial warranty(ies). Regulatory and Supply Chain Compliance Indicate whether your company could comply with RFO FAR clause 52.219-14 (Deviation JAN 2026) if this acquisition were to be set aside for small businesses (assuming that there is no waiver to the Nonmanufacturer Rule for the applicable NAICS code). Provide a brief supporting explanation. Existing Governmentwide Contract Vehicles Indicate whether your company has its own GSA Multiple Award Schedule (MAS) contract or other federal contract vehicle(s) under which NIST could award an order and, if so, provide the details of the contract(s) (contract number, Contracting Officer name/contact, SOW, terms and conditions, and price lists). Important Notes This Notice does not obligate the Government to award a contract or otherwise pay respondents to this notice for information provided in response to this Notice. Following a review of the responses and market research, NIST may publish a solicitation on an authorized site, depending on the chosen acquisition strategy. Responses received after the closing date for this Notice may not be considered. There is no solicitation available at this time. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted.
-Market Research11/28/2026
-Market Research12/05/2026
-Market Research12/03/2026
EvoLogics S2C T Hydroacoustic tiny-Modem 18/34 Stainless Steel
-Combined Synopsis11/05/2026

Additional Details

Solicitation Number

2024-005

Archive Date

Nov 9, 2023

Office Address

KANSAS CITY, MO, 64106