Notice ID: 48153950d8232325c053fb18f14ccb7cAward NoticeAwarded
Letterpress Plate Processor
Awarded on September 29, 2017. Full description on SAM.gov.
Awarded tounder 2031ZA17C00175 (source: SAM.gov award notice)• $255.8K
Overview
- Posted
- November 2, 2017
- Notice type
- Award Notice
- NAICS
- 323120: Support Activities for Printing
Notice details
- Place of performance
- 14th and C Streets, SW, Washington, DC, 20228
- PSC
- 36: SPECIAL INDUSTRY MACHINERY
- Last updated
- Dec 6, 2025
- Award date
- Sep 29, 2017
- Award amount (SAM.gov award notice)
- $255.8K
Identifiers
- Solicitation number
- 2031ZA17R00003
- Notice ID
- 48153950d8232325c053fb18f14ccb7c
- Award number (PIID)
- 2031ZA17C00175
Description
This amendment addresses questions for interested offerors. Q1. Pricing Equipment - in reference to the rigging part of the pricing, does the BEP have certain approved subcontractors that they use? If yes, may we have a list of them or who you prefer? A1. No, the Bureau of Engraving and Printing (BEP) does not have an approved list of subcontractors. Q2. Please confirm the final submit date of June 29, 2017 as the paperwork says June 13, 2017. Can an extension be granted? A2. The original solicitation closing date is June 29, 2017 at 12pm (EST). However, the RFP is due date for offers is herein extended until July 11, 2017 at 12pm (EST). Please ensure that responses are submitted to ines.lopez@bep.gov and gladys.wilks@bep.gov. Q3. Section L.6 - It reads that travel cost shall be in accordance with the Federal Travel regulations...what is the "Federal Travel Regulations"? A3. The Federal Travel Regulations (FTR) is the regulation contained in 41 Code of Federal Regulations (CFR), Chapters 300 through 304, that implements statutory requirements and Executive branch policies for travel by federal civilian employees and others authorized to travel at government expense. Further information regarding travel can be found at FAR 31.205-46. Q4. Under section L.5 - is this in reference to the requested equipment or equipment and plates? A4. Section L.5 is Volume III/Factor 3, Past Performance Preparation Instructions. Offerors shall provide Past Experience on previous same or similar contracts to the requested equipment. Q5. Can we use the Bureau of Engraving as a reference since you have purchased your equipment from us in the past...can we still use you as a reference? A5. Yes, the Bureau of Engraving and Printing can be used as a reference. Q6. Do you expect to use the WS 230 S and the WS 230 SD? If you are going to use 230 and 73 you will really need two separate washout units. The thicker 230 requires a modified configuration of the brushes. It would require a lot of time two switch the brushes and also a lot of recalibration each time switching back and forth between making each type of plate. If you will not be using the 230, then you don't need the 96x120 ED equipment. A6. BEP uses both types of plates WS230S & WS73W also WS73WD. Q7. Do you require a pre-wash section for the removal of the digital mask or LAMS layer? There is no ill effect from washing them off in the same cycle. A7. Per the solicitation, BEP will require a Pre-Wash Section. The digital mask is the LAMS layer. They are not separate items.
Award Overview
Award Number
2031ZA17C00175
Award Amount (SAM.gov award notice)
$255.8K
Award Date
Sep 29, 2017
Awardee
Original Solicitation
Notice ID: 48153950d8232325c053fb18f14ccb7c
Posted Date: Nov 2, 2017
Original Response Deadline: Not specified
Contract Details
No FPDS record matches this award number at the same department yet
Contract details typically appear within 2-4 weeks after award; DoD awards are published about 90 days after signature.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
2031ZA17R00003- Pre-Solicitation
- Solicitation
- Awarded
This opportunity has been awarded.
- 3×Pre-SolicitationMay 30, 2017
Letterpress Plate Processor
- SolicitationJun 16, 2017
Letterpress Plate Processor
- AwardedCurrentNov 2, 2017
Letterpress Plate Processor
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
67% | Awarded | Open | |
The Bureau of Engraving and Printing's Office of Production Engineering Support had a requirement for the acquisition of Simultan Offset Press Inspection System and Electronics Upgrades for the Bureau of Engraving and Printing currency facilities located in Washington, DC and Fort Worth, Texas. This requirement resulted in the procurement of upgrades on the Simultan presses which provide the BEP with KBA's latest color inspection system with a turnkey package that will be integrated into the BEP's existing offset presses, and other supporting equipment, materials and services. The BEP has (6) existing offset presses; three (3) at the BEP Washington, DC facility (DCF) and three (3) at the BEP Fort Worth, TX facility (WCF). The period of performance is 24-months upon award. In accordance with FAR 6.302-1 (a)(2)(ii), a justification for other than full and open competition (JOFOC) was issued under the authority of FAR 6.302-1, only one responsible source and no other supplies or services will satisfy agency requirements, please see attached. A notice of intent to sole source was issued under BEP-SSN-17-3017 on 30 March 2017 with a close date of 14 April 2017. No capabilities statement were received for this notice. | 58% | Awarded | Open |
49% | Awarded | Open | |
The Bureau of Engraving and Printing (BEP) manufactures US Currency Bank Notes. Part of the manufacturing process requires use of a software called Flowsys. This is a proprietary software package to KBA Nota-Sys. The software requires upgrading in order to ensure both the Eastern Currency Facility (ECF) and the Western Currency Facility (WCF) are on the same operating system platform. As such the BEP has awarded a fixed price service contract to KBA-NotaSys. The award's period of performance is from 08/31/2011 to 09/01/2012. The award was made under FAR part 15. This was a sole source acquisition per 41 USC 253(c)(1) "only one source". The base award was for $524,106. The award was made to KBA-NotaSys SA Avenue Du Grey 55 Lausanne, Switzerland 1022. Contact Kathleen Reidy, Contract Specialist, at Kathleen.Reidy@bep.gov regarding this notice. | 49% | Awarded | Open |
The Bureau of Engraving and Printing (BEP) located in Washington DC manufactures US currency bank notes. The BEP has awarded a price (FP) type purchase order no S11-00133 to KBA-NotaSys of Ave du Grey 55 Lusanne, Switzerland. This contract was awarded under FAR part 12. This contract is for "trouble shooting services for plate cracking" at the BEP's Washington DC facility. This facility is located at 14th and C St SW Washington, DC 20228. The total award is for $41,000. | 49% | Awarded | Open |
Additional Details
Solicitation Number
2031ZA17R00003
Archive Date
Nov 3, 2017