GovChime
Notice ID: 6ba8b229b494404cbf95f7b114a72f0eSolicitation

Various Spare Parts

Archived on September 13, 2022. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
1:00 PM UTC−04:00
Posted
September 1, 2022
Notice type
Solicitation
NAICS
333244: Classification Not Available
Agency
Department of the TreasuryBUREAU OF ENGRAVING AND PRINTING

Notice details

Office
OFFICE OF THE CHIEF PROCUREMENT OFFICER
Last updated
Sep 25, 2026

Identifiers

Solicitation number
2031ZA22Q00401
Notice ID
6ba8b229b494404cbf95f7b114a72f0e

Description

This is a request for quote for the spare parts listed in the attached RFQ. This RFQ synopsis/solicitation for commercial items is prepared in accordance with the Federal Acquisition Regulations (FAR) in Subpart 12 & 13. This is fixed price procurement under NAICS Codes 333244. It is anticipated that multiple awards may result from this announcement. See attached RFQ for complete details.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

Solicitation:2031ZA22Q00401
  1. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. SolicitationCurrentSep 1, 2022

    Various Spare Parts

    Notice 6ba8b229b494404cbf95f7b114a72f0e on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The Treasury Common Service Center (TCSC) – Acquisition Services on behalf of the Bureau of Engraving and Printing (BEP), Office of Supply Chain Management (OSCM), intends to award a sole source, firm-fixed-price contract for BEP Spare Parts: MAP3949 - Ink knife, “KBA Proprietary” P/N L5729664. Used On SOI III. MAP5335 - Blade, Carbide, KBA P/N L3435034, 100024879. CUTLINK X Unit blade for IFS. MAP5801 - Shaft, Driving, Complete, KBA P/N L7083406, 1002076889. Used On SOI III Wiper Drive. MAP5427 - Blade, Bottom Mount, Old K&B P/N L7100513, New K&B P/N 1002001637. Used In COPE ELP3197 - Thermoregulation Control Module, KBA P/N's L7151267 & L7155530, 8000026918, EI+EII, Plate Cylinder, Full Assembly. Used on SOI III Plate Cylinde MAP3781 - Harmonic Drive Gear Assembly, KBA P/N L7080953, For Form Roller Circumferential Register On SOI III The intended Contractor is Koenig & Bauer Banknote Solutions SA (KBBS). This requirement is being procured on a sole source basis pursuant to FAR 13.106-1(b) soliciting from a single source using FAR Part 12 procedures for the acquisitions of commercial products. A determination not to compete this requirement is solely within the discretion of the Government. Information received will be considered solely to determine whether to conduct a competitive procurement. Any cost associated with the preparation and submission of data or information or any other costs incurred in responding to this notice is the sole responsibility of the respondent and will not be reimbursed by the Government. Responses MUST be received NO LATER THAN 12:00 PM, Eastern Standard Time (EST), 5 November 2026. Additionally, interested sources must be registered and currently active in the System for Award Management (SAM), found at https://www/sam/gov. Responses MUST be submitted in writing ONLY via email to Diane.Rollins@treasury.gov and Naweed.Nezam@treasury.gov within the closing date/time of publication of this notice.
-Special Notice11/05/2026
The Treasury Common Services Center – Acquisition Services behalf of the Bureau of Engraving and Printing (BEP), Office of Supply Chain Management (OSCM) intends to award a sole source, firm-fixed-price contract for BEP parts: MAP3949 Ink knife, “KBA Proprietary” P/N L5729664. Used On SOI III. MAP5335 Blade, Carbide, KBA P/N L3435034, 100024879. CUTLINK X Unit blade for IFS. MAP5801 Shaft, Driving, Complete, KBA P/N L7083406, 1002076889. Used On SOI III Wiper Drive. Blade, Bottom Mount, Old K&B P/N L7100513, New K&B P/N 1002001637. Used On COPE. MAP5427 Blade, Bottom Mount, Old K&B P/N L7100513, New K&B P/N10 02001637 Used on Cope The intended Contractor is Koenig & Bauer Banknote Solutions SA. This requirement is being procured on a sole-source basis pursuant to FAR 13.106-1(b), soliciting from a Single Source, using FAR Part 12 procedures for the acquisition of commercial products. A determination not to compete this requirement is solely within the discretion of the Government. Information received will be considered solely to determine whether to conduct a competitive procurement. Any cost associated with the preparation and submission of data or information or any other costs incurred in responding to this notice is the sole responsibility of the respondent and will not be reimbursed by the Government. Responses MUST be received NO LATER THAN 12:00 PM, Eastern Standard Time (EST) 10/28/2026. Additionally, interested sources must be registered and currently active in the System for Award Management (SAM), found at https://www.sam.gov. Responses MUST be submitted in writing ONLY via email to Diane.Rollins@treasury.gov and Naweed.Nezam@treasury.gov within the closing date/time of publication of this notice.
-Special Notice10/28/2026
The Government intends to make an award to: Koenig & Bauer Banknote Solutions SA THIS IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. The Government intends to award a sole source contract utilizing “Only one responsible source and no other supplies or services will satisfy agency requirements” IAW RFO 6.103-1. The Bureau of Engraving and Printing (BEP) requires the procurement of specialized Koenig & Bauer Banknote Solutions (KBBS) make-ready sensors for its Super Simultan Offset printing presses for Washington DC and Fort Worth TX locations. The make-ready sensor retrofit will include fabrication, delivery, installation, set-up, training and commissioning of four (4) make-ready sensors on the Super Simultan Offset presses. These sensors are essential for ensuring make-ready sheets during machine setup minimizing paper waste and maintaining superior print quality to support the secure, high-volume production of Federal Reserve notes. The Super Simultan Offset Printing Platform, and sensors are proprietary to Koenig & Bauer Banknote Solutions. Anticipated Period of Performance: 12-months This notice of intent is not a request for competitive offers/quotes/proposals. A determination not to compete this requirement is solely within the discretion of the government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. The solicitation will not be posted. To be considered, responses MUST be received NO LATER THAN 12:00 PM EST, November 13, 2026. Additionally, interested parties must be registered and currently active in the System for Award Management (SAM), found at https://www.sam.gov. Responses MUST be submitted within the closing date/time of publication of this notice. Interested parties may express their interest by providing a capabilities statement. The capabilities statement must provide clear and unambiguous evidence to substantiate the capability of the party to provide the required services. Points of Contact regarding this notice is Bryan Sheppard at bryan.sheppard@bep.gov.
-Special Notice11/13/2026
The objective of this Source Sought Notice is to obtain information to identify firms capable of providing equipment, materials and services and other items and non-personal services necessary to provide Ergonomic Drum Handling Equipment, except for those items specified as government furnished property and services. The Contractor shall provide equipment and perform to the standards in this contract.
-Market Research11/07/2026
The United States Mint hereby invites your company to submit a Proposal in response to this Solicitation 2031JG26R00011 "United States Mint Die Steel". 1. SERVICES REQUIRED (SYNOPSIS): The United States Mint has a requirement to acquire high grade steel, in bar form, suitable for the manufacture of coinage dies used to produce proof and circulating coins to meet the nation's numismatic and commercial needs. Presently, the following steel grades are used in our dies, 52100, A2, A9, L6, and S7. To ensure the highest quality standards with our coins, the die steel requires strict adherence to the specifications herein. The Die Manufacturing Division of the United States Mint is divided between the United States Mint's Philadelphia, PA facility, and the Denver, CO facility. The die manufacturing facilities are responsible for the production of all dies used in the manufacture of the nation's coinage and produce over 100,000 dies each year. These dies are utilized at the four minting operations of the United States Mint which are located at Philadelphia, PA, Denver, CO, San Francisco, CA, and West Point, NY. Steel shall be delivered to the United States Mint at Philadelphia and the United States Mint at Denver in accordance with specific delivery orders, detailing the quantities of each die steel type and delivery period. 2. QUESTIONS: Questions regarding the requirements of this solicitation must be submitted in writing, electronically and must be received by the United States Mint no later than 10:00 AM (EST) MONDAY, JULY 13, 2026. All question should be forwarded to the attention of Katrice Walker (KATRICE.WALKER@USMINT.TREAS.GOV) , and cite the applicable section, clause, paragraph number, and page of the solicitation that they address. Time constraints may preclude answering late submittals or questions. Please be advised that questions submitted by any method other than electronic mail or after the specified deadline may not be answered. 3. VENDOR DAY DATE / TIME: Offerors shall submit their Point of Contact that will be attending the United States Vendor Day electronically to KATRICE.WALKER@USMINT.TREAS.GOV by 11:00 AM (EST) on FRIDAY, JULY 07, 2026, the following information must be included in the email Vendor Name, POC Name, Number, Email Address that will be attending the United States Mint Vendor Day The United States (U.S.) Mint is inviting potential vendors to present virtually by the end of July to members of the U.S. Mint Die Manufacturing Divisions to provide insight into their company’s capabilities. Vendors should recognize that this is an opportunity to present themselves and their capabilities to address the bar stock die steel requirements of the U.S. Mint and additional engineering support requests. The purpose of this requirement is for the U.S. Mint to first, continue receiving quality bar stock die steel for coinage dies of the steel grades that have been used successfully in the past. Additionally, the U.S. Mint is interested in research and development assistance to identify potential new steel grades for coinage dies. This may include but is not limited to sample lots, testing for die life, and engineering assistance from the contractor. These presentations will allow interactions between various internal Mint stakeholders and the contractors responsible for steel production and research. These presentations may educate decisions that will impact the U.S. Mint’s approach to current and new die steel products to meet its customers’ expectations. 4. FIRST ARTICLE SAMPLES SUBMISSION: In accordance with Section F.8 FIRST ARTICLE SAMPLES, the die steel samples shall be boxed and sent to (see below): Please coordinate with Joseph Jordan prior to shipping die steel samples. The samples shall be boxed with protective packaging material and sent to: United States Mint at Philadelphia ATTN: MariAnne Davis 151 North Independence Mall East Philadelphia, PA 19106 Or, United States Mint at Denver ATTN: Meghan Tryon / Rhonda Williams 320 West Colfax Ave. Denver, CO 80204 It is important that you coordinate with the COR and United States Mint Metallurgist for that site prior to any shipment. For a new supplier to the United States Mint first article samples shall be manufactured utilizing the production equipment, tools, and processes to be employed in production of other quantities required under the contract and delivered in accordance with the terms of the contract. First article samples shall be inspected by the United States Mint prior to the start of production quantities. United States Mint approval of first article samples shall not relieve the Contractor of responsibility to comply with the specifications and inspection requirements herein. Changes in production processes, equipment, or materials shall not be made by the Contractor subsequent to first article approval without the advance written approval of the Contracting Officer. 5. PROPOSAL DUE DATE / TIME: Proposals to this Solicitation shall be submitted by 10:00 AM (EST) FRIDAY, JULY 24, 2026, electronically to Katrice Walker (KATRICE.WALKER@USMINT.TREAS.GOV). It is the offerors responsibility to ensure and verify that the United States Mint receives the proposal on or before the date and time specified. 6. ANTICIPATED CONTRACT TYPE: The United States Mint intends to award a Firm-Fixed Price IDIQ Contract. The Fixed Price proposed shall be “all inclusive”, covering all costs required to complete the project. 7. SUBMISSION REQUIREMENTS: Submit a comprehensive Proposal in response to this RFP. The Proposal must clearly articulate (through the use of narrative, graphs, charts, diagrams, etc.) the offerors approach to satisfying the requirements specified in the Statement of Work. The Price Quote shall expressly identify the Firm Fixed Prices of all costs (i.e., Labor, Materials, etc.) associated to complete the project. Please confirm receipt of this solicitation. The United States Mint looks forward to receiving your submission. Thank you for your consideration of our request!
-Solicitation07/31/2026

Additional Details

Solicitation Number

2031ZA22Q00401

Archive Date

Sep 13, 2022

Office Address

WASHINGTON, DC, 20228