GovChime
Notice ID: f7e42280d53e49dea75b744bb0cadcbeCombined Synopsis/Solicitation

Power Supply

Archived on April 27, 2023. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM UTC−04:00
Posted
April 11, 2023
Notice type
Combined Synopsis/Solicitation
NAICS
333248: All Other Industrial Machinery Manufacturing
Agency
Department of the TreasuryBUREAU OF ENGRAVING AND PRINTING

Notice details

Office
OFFICE OF THE CHIEF PROCUREMENT OFFICER
Last updated
Sep 25, 2026

Identifiers

Solicitation number
2031ZA23Q00192
Notice ID
f7e42280d53e49dea75b744bb0cadcbe

Description

This is a request for quote for the supplies listed on page 2 (Schedule). This RFQ synopsis/solicitation for commercial items is prepared in accordance with the Federal Acquisition Regulations (FAR) in Subpart 12 & 13. This is fixed price procurement

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

Solicitation:2031ZA23Q00192
  1. Combined Synopsis
  1. Combined SynopsisCurrentApr 11, 2023

    Power Supply

    Notice f7e42280d53e49dea75b744bb0cadcbe on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The Treasury Common Service Center (TCSC) – Acquisition Services on behalf of the Bureau of Engraving and Printing (BEP), Office of Supply Chain Management (OSCM), intends to award a sole source, firm-fixed-price contract for BEP Spare Parts: MAP3949 - Ink knife, “KBA Proprietary” P/N L5729664. Used On SOI III. MAP5335 - Blade, Carbide, KBA P/N L3435034, 100024879. CUTLINK X Unit blade for IFS. MAP5801 - Shaft, Driving, Complete, KBA P/N L7083406, 1002076889. Used On SOI III Wiper Drive. MAP5427 - Blade, Bottom Mount, Old K&B P/N L7100513, New K&B P/N 1002001637. Used In COPE ELP3197 - Thermoregulation Control Module, KBA P/N's L7151267 & L7155530, 8000026918, EI+EII, Plate Cylinder, Full Assembly. Used on SOI III Plate Cylinde MAP3781 - Harmonic Drive Gear Assembly, KBA P/N L7080953, For Form Roller Circumferential Register On SOI III The intended Contractor is Koenig & Bauer Banknote Solutions SA (KBBS). This requirement is being procured on a sole source basis pursuant to FAR 13.106-1(b) soliciting from a single source using FAR Part 12 procedures for the acquisitions of commercial products. A determination not to compete this requirement is solely within the discretion of the Government. Information received will be considered solely to determine whether to conduct a competitive procurement. Any cost associated with the preparation and submission of data or information or any other costs incurred in responding to this notice is the sole responsibility of the respondent and will not be reimbursed by the Government. Responses MUST be received NO LATER THAN 12:00 PM, Eastern Standard Time (EST), 5 November 2026. Additionally, interested sources must be registered and currently active in the System for Award Management (SAM), found at https://www/sam/gov. Responses MUST be submitted in writing ONLY via email to Diane.Rollins@treasury.gov and Naweed.Nezam@treasury.gov within the closing date/time of publication of this notice.
-Special Notice11/05/2026
The Treasury Common Services Center – Acquisition Services behalf of the Bureau of Engraving and Printing (BEP), Office of Supply Chain Management (OSCM) intends to award a sole source, firm-fixed-price contract for BEP parts: MAP3949 Ink knife, “KBA Proprietary” P/N L5729664. Used On SOI III. MAP5335 Blade, Carbide, KBA P/N L3435034, 100024879. CUTLINK X Unit blade for IFS. MAP5801 Shaft, Driving, Complete, KBA P/N L7083406, 1002076889. Used On SOI III Wiper Drive. Blade, Bottom Mount, Old K&B P/N L7100513, New K&B P/N 1002001637. Used On COPE. MAP5427 Blade, Bottom Mount, Old K&B P/N L7100513, New K&B P/N10 02001637 Used on Cope The intended Contractor is Koenig & Bauer Banknote Solutions SA. This requirement is being procured on a sole-source basis pursuant to FAR 13.106-1(b), soliciting from a Single Source, using FAR Part 12 procedures for the acquisition of commercial products. A determination not to compete this requirement is solely within the discretion of the Government. Information received will be considered solely to determine whether to conduct a competitive procurement. Any cost associated with the preparation and submission of data or information or any other costs incurred in responding to this notice is the sole responsibility of the respondent and will not be reimbursed by the Government. Responses MUST be received NO LATER THAN 12:00 PM, Eastern Standard Time (EST) 10/28/2026. Additionally, interested sources must be registered and currently active in the System for Award Management (SAM), found at https://www.sam.gov. Responses MUST be submitted in writing ONLY via email to Diane.Rollins@treasury.gov and Naweed.Nezam@treasury.gov within the closing date/time of publication of this notice.
-Special Notice10/28/2026
The Government intends to make an award to: Koenig & Bauer Banknote Solutions SA THIS IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. The Government intends to award a sole source contract utilizing “Only one responsible source and no other supplies or services will satisfy agency requirements” IAW RFO 6.103-1. The Bureau of Engraving and Printing (BEP) requires the procurement of specialized Koenig & Bauer Banknote Solutions (KBBS) make-ready sensors for its Super Simultan Offset printing presses for Washington DC and Fort Worth TX locations. The make-ready sensor retrofit will include fabrication, delivery, installation, set-up, training and commissioning of four (4) make-ready sensors on the Super Simultan Offset presses. These sensors are essential for ensuring make-ready sheets during machine setup minimizing paper waste and maintaining superior print quality to support the secure, high-volume production of Federal Reserve notes. The Super Simultan Offset Printing Platform, and sensors are proprietary to Koenig & Bauer Banknote Solutions. Anticipated Period of Performance: 12-months This notice of intent is not a request for competitive offers/quotes/proposals. A determination not to compete this requirement is solely within the discretion of the government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. The solicitation will not be posted. To be considered, responses MUST be received NO LATER THAN 12:00 PM EST, November 13, 2026. Additionally, interested parties must be registered and currently active in the System for Award Management (SAM), found at https://www.sam.gov. Responses MUST be submitted within the closing date/time of publication of this notice. Interested parties may express their interest by providing a capabilities statement. The capabilities statement must provide clear and unambiguous evidence to substantiate the capability of the party to provide the required services. Points of Contact regarding this notice is Bryan Sheppard at bryan.sheppard@bep.gov.
-Special Notice11/13/2026
The objective of this Source Sought Notice is to obtain information to identify firms capable of providing equipment, materials and services and other items and non-personal services necessary to provide Ergonomic Drum Handling Equipment, except for those items specified as government furnished property and services. The Contractor shall provide equipment and perform to the standards in this contract.
-Market Research11/07/2026
3D Printers
-Combined Synopsis09/16/2026

Additional Details

Solicitation Number

2031ZA23Q00192

Archive Date

Apr 27, 2023

Office Address

WASHINGTON, DC, 20228