GovChime
Notice ID: 8e54d606712843a49ce334d17ce57805Award NoticeAwarded

NextGen M8 Machines and Maintenance Service Plan

Awarded on September 30, 2024. Full description on SAM.gov.

Awarded tounder 2031ZA24C00455 (source: SAM.gov award notice)• $4.2M

Overview

Posted
November 27, 2024
Notice type
Award Notice
NAICS
333248: All Other Industrial Machinery Manufacturing
Agency
Department of the Treasury

Notice details

Place of performance
Washington, DC, 20228
Last updated
Jan 23, 2026
Award date
Sep 30, 2024
Award amount (SAM.gov award notice)
$4.2M

Identifiers

Solicitation number
2031ZA24R00008
Notice ID
8e54d606712843a49ce334d17ce57805
Award number (PIID)
2031ZA24C00455

Description

IAW FAR 5.301(c), the following post award synopsis is provided for this acquisition which was covered by the WTO GPA. The notice of intent to sole source that was posted on the GPE did not generate any responses. No interested parties emerged nor identified their interest and capabilities. Not having any interested parties utilizing the opportunity to express interest or provide a capability statement, further strengthened the justification to proceed as a sole source requirement. Procurement proceeded on a Sole Source basis with the Original Equipment Manufacturer (OEM) with proprietary obligations and restrictions used by the Federal Reserve Board currency inspection system. The equipment is a custom-designed currency inspection system that must perform a variety of detection of security features on FRN at very high speed, must interface correctly with several third-party sensors, must process features unique to Federal Reserve Notes (FRNs), and must yield identical results to the M8 systems in use by the FRB.

Full description on SAM.gov

Award Overview

Award Number

2031ZA24C00455

Award Amount (SAM.gov award notice)

$4.2M

Award Date

Sep 30, 2024

Awardee

Awardee UEI

KD86JSHKFGN4

Original Solicitation

Notice ID: 8e54d606712843a49ce334d17ce57805

Posted Date: Nov 27, 2024

Original Response Deadline: Not specified

Contacts

Documents

Showing 1 of 1 items

Document
Source
Agency
Posted Date
File Size
Actions
Award NoticeDepartment of the TreasuryNov 27, 2024-

Lifecycle

Solicitation:2031ZA24R00008
  1. Awarded

This opportunity has been awarded.

  1. AwardedCurrentNov 27, 2024

    NextGen M8 Machines and Maintenance Service Plan

    Notice 8e54d606712843a49ce334d17ce57805 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The Treasury Common Service Center (TCSC) – Acquisition Services on behalf of the Bureau of Engraving and Printing (BEP), Office of Supply Chain Management (OSCM), intends to award a sole source, firm-fixed-price contract for BEP Spare Parts: MAP3949 - Ink knife, “KBA Proprietary” P/N L5729664. Used On SOI III. MAP5335 - Blade, Carbide, KBA P/N L3435034, 100024879. CUTLINK X Unit blade for IFS. MAP5801 - Shaft, Driving, Complete, KBA P/N L7083406, 1002076889. Used On SOI III Wiper Drive. MAP5427 - Blade, Bottom Mount, Old K&B P/N L7100513, New K&B P/N 1002001637. Used In COPE ELP3197 - Thermoregulation Control Module, KBA P/N's L7151267 & L7155530, 8000026918, EI+EII, Plate Cylinder, Full Assembly. Used on SOI III Plate Cylinde MAP3781 - Harmonic Drive Gear Assembly, KBA P/N L7080953, For Form Roller Circumferential Register On SOI III The intended Contractor is Koenig & Bauer Banknote Solutions SA (KBBS). This requirement is being procured on a sole source basis pursuant to FAR 13.106-1(b) soliciting from a single source using FAR Part 12 procedures for the acquisitions of commercial products. A determination not to compete this requirement is solely within the discretion of the Government. Information received will be considered solely to determine whether to conduct a competitive procurement. Any cost associated with the preparation and submission of data or information or any other costs incurred in responding to this notice is the sole responsibility of the respondent and will not be reimbursed by the Government. Responses MUST be received NO LATER THAN 12:00 PM, Eastern Standard Time (EST), 5 November 2026. Additionally, interested sources must be registered and currently active in the System for Award Management (SAM), found at https://www/sam/gov. Responses MUST be submitted in writing ONLY via email to Diane.Rollins@treasury.gov and Naweed.Nezam@treasury.gov within the closing date/time of publication of this notice.
-Special Notice11/05/2026
The Treasury Common Services Center – Acquisition Services behalf of the Bureau of Engraving and Printing (BEP), Office of Supply Chain Management (OSCM) intends to award a sole source, firm-fixed-price contract for BEP parts: MAP3949 Ink knife, “KBA Proprietary” P/N L5729664. Used On SOI III. MAP5335 Blade, Carbide, KBA P/N L3435034, 100024879. CUTLINK X Unit blade for IFS. MAP5801 Shaft, Driving, Complete, KBA P/N L7083406, 1002076889. Used On SOI III Wiper Drive. Blade, Bottom Mount, Old K&B P/N L7100513, New K&B P/N 1002001637. Used On COPE. MAP5427 Blade, Bottom Mount, Old K&B P/N L7100513, New K&B P/N10 02001637 Used on Cope The intended Contractor is Koenig & Bauer Banknote Solutions SA. This requirement is being procured on a sole-source basis pursuant to FAR 13.106-1(b), soliciting from a Single Source, using FAR Part 12 procedures for the acquisition of commercial products. A determination not to compete this requirement is solely within the discretion of the Government. Information received will be considered solely to determine whether to conduct a competitive procurement. Any cost associated with the preparation and submission of data or information or any other costs incurred in responding to this notice is the sole responsibility of the respondent and will not be reimbursed by the Government. Responses MUST be received NO LATER THAN 12:00 PM, Eastern Standard Time (EST) 10/28/2026. Additionally, interested sources must be registered and currently active in the System for Award Management (SAM), found at https://www.sam.gov. Responses MUST be submitted in writing ONLY via email to Diane.Rollins@treasury.gov and Naweed.Nezam@treasury.gov within the closing date/time of publication of this notice.
-Special Notice10/28/2026
GasFlow DLP Printing Interface, developed by scientists at Los Alamos National Laboratory, helps resin-based 3D printing systems produce finer details, faster builds and more consistent part quality by controlling oxygen where curing happens most critically. The open-surface approach fits well with bottom-up DLP and related vat photopolymer processes, and it can enhance existing printer designs, as well as new platforms, by improving print fidelity, process stability and material flexibility. How it Works The system adds a second liquid beneath the printable resin inside the vat, creating a stable fluid-fluid interface between the two liquids. This interface is where the resin is polymerized, removing the need to pull the polymerized layer off the surface - an inherent default in the DLP process. The lower liquid is chosen to be an immiscible, high-density fluid, such as a perfluorinated fluid, that is treated with an inert gas and circulated continuously during printing. As it flows beneath the resin and above the transparent vat window, the lower liquid removes oxygen from the resin and introduces inert gas in its place, which reduces oxygen inhibition at the curing zone. With less oxygen interfering with polymerization, projected light can cure smaller features more reliably, more quickly and more uniformly across the part with less bleeding. Technical Description The patented GasFlow DLP Printing Interface is designed for additive manufacturing methods such as DLP, SLA and related photopolymer printing processes. The GasFlow DLP Printing Interface uses a first container or vat with a transparent portion, a first fluid positioned against that transparent portion and a second fluid that serves as the printable resin. The first fluid and second fluid form a fluid-fluid interface, with the first fluid located between the vat window and the resin. A circulation system moves the first fluid through the vat and an associated treatment container by way of conduits and a pumping mechanism. In representative embodiments, the first fluid is a perfluorinated solvent that has been treated with an inert gas such as nitrogen, helium, argon or carbon dioxide. As the treated first fluid circulates, it removes oxygen from resin at the interface and helps replace that oxygen with inert gas, which improves polymerization performance at the print surface. Oxygen in standard resin systems can suppress curing, which means more energy is required than necessary which in turn can create uneven polymerization that leaves parts overcured in some regions and undercured in others making very small features difficult to print. Features below about 50 microns in diameter may fail to print when normal oxygen levels are present. GasFlow DLP Printing demonstrated print speed improvement of at least one-third, with larger gains considered possible under optimized conditions. An added benefit to flowing fluid is that the system can provide temperature-control to help manage heat buildup during printing, which can improve part quality and widen the range of usable resin chemistries. Advantages Produces finer features and higher print resolution Reduces oxygen-related defects during curing Speeds printing compared with standard setups (oxygen exposed) Improves consistency across the part, including edge-to-center uniformity Supports retrofit potential for many bottom-up DLP printers Increases lifetime of liquid resin May enable use of resin chemistries that are otherwise difficult to process because of overheating or curing instability Market Applications Additive Manufacturing (resin 3D printers, printer upgrades, production platforms) Industrial Manufacturing (precision polymer parts, lightweight structures, fabrication tooling) Medical and Dental (custom polymer components, device fabrication, detailed models) Electronics and Microfabrication (fine-feature polymer structures, patterned parts, prototyping) Research and Laboratory Equipment (materials development, process testing, advanced printing systems) Aerospace and Defense (complex geometries, lattice structures, specialty components) TRL 4 US Patent No. 11,911,955 LA-UR-26-29477 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
-Special Notice04/06/2027
The objective of this Source Sought Notice is to obtain information to identify firms capable of providing equipment, materials and services and other items and non-personal services necessary to provide Ergonomic Drum Handling Equipment, except for those items specified as government furnished property and services. The Contractor shall provide equipment and perform to the standards in this contract.
-Market Research11/07/2026
See solicitation and it's attachments
-Solicitation11/19/2026

Additional Details

Solicitation Number

2031ZA24R00008

Archive Date

Nov 28, 2024

Office Address

WASHINGTON, DC, 20228