GovChime
Notice ID: d47b213e475d4e7ba9d9a2cbf6ad427dSources SoughtArchived

Spare Parts - Super Orlof Intaglio Press

Archived on May 28, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
4:00 PM EDT
Posted
May 11, 2026
Notice type
Sources Sought
NAICS
333248: All Other Industrial Machinery Manufacturing
Agency
Department of the TreasuryBUREAU OF ENGRAVING AND PRINTING

Notice details

Office
OFFICE OF THE CHIEF PROCUREMENT OFFICER
Place of performance
Washington, District of Columbia, 20228
Last updated
Oct 31, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
2031ZA26N00033
Notice ID
d47b213e475d4e7ba9d9a2cbf6ad427d

Description

This IS NOT a request for bids, quotes, or proposal. This is a Sources Sought announcement only. The purpose of this notice is to conduct market research and obtain information from qualified sources. No award may be issued from this Sources Sought Notice.

Interested parties of any size may submit a response to this notice.

NO SOLICITATION DOCUMENTS EXIST AT THIS TIME.
Please attached Sources Sought Notice and Parts List

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (2)

  • Parts List_SOI.xlsx

    54 KBAdded in Sources Sought version 3Posted
    Download
  • Sources Sought Notice - Spare Parts - Super Orlof Intaglio Press.pdf

    220 KBAdded in Sources Sought version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Sources SoughtArchivedCurrent

    Spare Parts - Super Orlof Intaglio Press

    Notice d47b213e475d4e7ba9d9a2cbf6ad427d on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The Treasury Common Service Center (TCSC) – Acquisition Services on behalf of the Bureau of Engraving and Printing (BEP), Office of Supply Chain Management (OSCM), intends to award a sole source, firm-fixed-price contract for BEP Spare Parts: MAP3949 - Ink knife, “KBA Proprietary” P/N L5729664. Used On SOI III. MAP5335 - Blade, Carbide, KBA P/N L3435034, 100024879. CUTLINK X Unit blade for IFS. MAP5801 - Shaft, Driving, Complete, KBA P/N L7083406, 1002076889. Used On SOI III Wiper Drive. MAP5427 - Blade, Bottom Mount, Old K&B P/N L7100513, New K&B P/N 1002001637. Used In COPE ELP3197 - Thermoregulation Control Module, KBA P/N's L7151267 & L7155530, 8000026918, EI+EII, Plate Cylinder, Full Assembly. Used on SOI III Plate Cylinde MAP3781 - Harmonic Drive Gear Assembly, KBA P/N L7080953, For Form Roller Circumferential Register On SOI III The intended Contractor is Koenig & Bauer Banknote Solutions SA (KBBS). This requirement is being procured on a sole source basis pursuant to FAR 13.106-1(b) soliciting from a single source using FAR Part 12 procedures for the acquisitions of commercial products. A determination not to compete this requirement is solely within the discretion of the Government. Information received will be considered solely to determine whether to conduct a competitive procurement. Any cost associated with the preparation and submission of data or information or any other costs incurred in responding to this notice is the sole responsibility of the respondent and will not be reimbursed by the Government. Responses MUST be received NO LATER THAN 12:00 PM, Eastern Standard Time (EST), 5 November 2026. Additionally, interested sources must be registered and currently active in the System for Award Management (SAM), found at https://www/sam/gov. Responses MUST be submitted in writing ONLY via email to Diane.Rollins@treasury.gov and Naweed.Nezam@treasury.gov within the closing date/time of publication of this notice.
97%
Special Notice11/05/2026
3D Printers
57%
Combined Synopsis09/16/2026
FS5 Analyzer: Amendment 0001- to add Small business Code. Amendment 0002 - CLIN 004: Would an equal that classifies vessel elements and shives using deterministic image analysis algorithms, rather than neural network classification, be considered to meet the salient characteristics?Yes CLIN 005: The salient characteristics name a Valmet Data Modeler license. For an equal product, would customizable result tables and reports without separate modeling software be acceptable?Yes CLIN 001: The equal product uses circular polarized light, which does not detect air bubbles, so it does not require a deaeration unit. Would the water treatment unit be waived for an equal that does not need one?Yes CLIN 003: If the equal product does not require a cleaning chemical (it self cleans with a water purge), may this CLIN be quoted as not applicable?Yes Delivery: The preferred delivery is within 30 days. Is a delivery of 90 days ARO acceptable?Yes Multiple offers: May we submit both a brand name offer and a separate alternate equal offer in PIEE?This is preferred if alternate equal units are offered.
45%
Combined Synopsis10/30/2026
The purpose of this Commercial Solution Opportunity (CSO) is to seek out qualified vendors who have experience manufacturing an Automated Fluidized Bed Mixer Facility Modernization for end use at Pine Bluff Arsenal. This announcement is in support of market research performed by the Army Contract Command - Rock Island to determine interest and capability to provide the supply defined within this CSO. This CSO will utilize a solicitation process authorized by RFO DFARS 212.70. Under this CSO, the DoW will be allowed to competitively procure innovative commercial items, technologies, and services. CSO procedures provide a streamlined acquisition process and simplified contract terms resulting in FAR-based contracts awarded under Part 12 Commercial Item Procedures. Both traditional and non-traditional defense contractors may be awarded contracts under this CSO. Under a CSO DoW contracting officers may competitively select quotes received in response to a general competitive solicitation, similar to a broad agency announcement, based on a review of quotes by scientific, technological, or other subject matter experts. Please provide your Reponses to the following questions below through email to Ashley Testake, ashley.e.testrake.civ@mail.mil NLT COB 14 October 2026.
44%
Solicitation11/17/2026
GasFlow DLP Printing Interface, developed by scientists at Los Alamos National Laboratory, helps resin-based 3D printing systems produce finer details, faster builds and more consistent part quality by controlling oxygen where curing happens most critically. The open-surface approach fits well with bottom-up DLP and related vat photopolymer processes, and it can enhance existing printer designs, as well as new platforms, by improving print fidelity, process stability and material flexibility. How it Works The system adds a second liquid beneath the printable resin inside the vat, creating a stable fluid-fluid interface between the two liquids. This interface is where the resin is polymerized, removing the need to pull the polymerized layer off the surface - an inherent default in the DLP process. The lower liquid is chosen to be an immiscible, high-density fluid, such as a perfluorinated fluid, that is treated with an inert gas and circulated continuously during printing. As it flows beneath the resin and above the transparent vat window, the lower liquid removes oxygen from the resin and introduces inert gas in its place, which reduces oxygen inhibition at the curing zone. With less oxygen interfering with polymerization, projected light can cure smaller features more reliably, more quickly and more uniformly across the part with less bleeding. Technical Description The patented GasFlow DLP Printing Interface is designed for additive manufacturing methods such as DLP, SLA and related photopolymer printing processes. The GasFlow DLP Printing Interface uses a first container or vat with a transparent portion, a first fluid positioned against that transparent portion and a second fluid that serves as the printable resin. The first fluid and second fluid form a fluid-fluid interface, with the first fluid located between the vat window and the resin. A circulation system moves the first fluid through the vat and an associated treatment container by way of conduits and a pumping mechanism. In representative embodiments, the first fluid is a perfluorinated solvent that has been treated with an inert gas such as nitrogen, helium, argon or carbon dioxide. As the treated first fluid circulates, it removes oxygen from resin at the interface and helps replace that oxygen with inert gas, which improves polymerization performance at the print surface. Oxygen in standard resin systems can suppress curing, which means more energy is required than necessary which in turn can create uneven polymerization that leaves parts overcured in some regions and undercured in others making very small features difficult to print. Features below about 50 microns in diameter may fail to print when normal oxygen levels are present. GasFlow DLP Printing demonstrated print speed improvement of at least one-third, with larger gains considered possible under optimized conditions. An added benefit to flowing fluid is that the system can provide temperature-control to help manage heat buildup during printing, which can improve part quality and widen the range of usable resin chemistries. Advantages Produces finer features and higher print resolution Reduces oxygen-related defects during curing Speeds printing compared with standard setups (oxygen exposed) Improves consistency across the part, including edge-to-center uniformity Supports retrofit potential for many bottom-up DLP printers Increases lifetime of liquid resin May enable use of resin chemistries that are otherwise difficult to process because of overheating or curing instability Market Applications Additive Manufacturing (resin 3D printers, printer upgrades, production platforms) Industrial Manufacturing (precision polymer parts, lightweight structures, fabrication tooling) Medical and Dental (custom polymer components, device fabrication, detailed models) Electronics and Microfabrication (fine-feature polymer structures, patterned parts, prototyping) Research and Laboratory Equipment (materials development, process testing, advanced printing systems) Aerospace and Defense (complex geometries, lattice structures, specialty components) TRL 4 US Patent No. 11,911,955 LA-UR-26-29477 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
44%
Special Notice04/06/2027

Additional Details

Solicitation Number

2031ZA26N00033

Archive Date

May 28, 2026

Office Address

WASHINGTON, DC, 20228