Notice ID: 23f67e35ebd242cda89fab69715c7f4cSources Sought
Extended Army Contracting Command (ACC) Aberdeen Proving Ground (APG) High Altitude Electromagnetic Pulse (HEMP) hardened medium fixed Satellite Communications Earth Terminals Request for Information (RFI)
Responses closed . Full description on SAM.gov.
Description
The Army Contracting Command (ACC) Aberdeen Proving Ground (APG) is hereby
extending the date that responses to the RFI are due back to the government.
Under Sources Sought Notice Original No. W15P7T-27-R-HMFT
Please see the attachment to this posting which includes the Questions submitted and
the Government's posted answers.
RESPONSES - Due date has been extended from the previous date of 10/15/2026
Please submit your RFI responses for the above requested information in PDF or
Microsoft Word format no later than (NLT) Noon EST on 19 October 2026 to Dr. Renee J
Bayton, Contract Specialist at renee.j.bayton.civ@army.mil and Licinda M Peters,
Contracting Officer at licinda.m.peters.civ@army.mil
Thank you for your time and attention to our posting.
The Army Contracting Command (ACC) Aberdeen Proving Ground (APG) is hereby issuing the following:
REQUEST FOR INFORMATION (RFI)
For our Mission Partner: Product Manager for Wideband Enterprise Satellite Systems (PdM WESS)
Under Solicitation No. W15P7T-27-R-HMFT
DESCRIPTION
Product Manager Wideband Enterprise Satellite Systems (PdM WESS) is seeking information on companies with a comprehensive background in producing, installing and maintaining up to a quantity of nine state-of-the-art High Altitude Electromagnetic Pulse (HEMP) hardened medium fixed Satellite Communications Earth Terminals. PdM WESS is tentatively planning to acquire these terminals to be installed within the continental United States. The Government tentatively plans to issue a solicitation for a HEMP Hardened Medium Fixed SATCOM Terminal that operates in X Band, with selective polarization operation. The North
American Industry Classification System Code (NAICS) for this requirement is 517410: Satellite Telecommunications.
Synopsis:
Request for Information (RFI) for a potential requirement for production, installation and sustainment support of high-altitude electromagnetic pulse (HEMP) hardened satellite communications terminals.
This is an RFI only. This notice is issued solely for information and planning purposes and does not constitute a Request For Proposal (RFP) or a promise to issue an RFP in the future. The information provided in this notice is subject to change and is not binding on the government.
RESPONSES (REVSED due date)
Please submit your RFI responses for the above requested information in PDF or Microsoft Word format no later than (NLT) Noon EST on 19 October 2026 to Dr. Renee J Bayton, Contract Specialist at renee.j.bayton.civ@army.mil and Licinda M Peters, Contracting Officer at licinda.m.peters.civ@army.mil
Please find attached the RFI document and W15P7T-27-R-HMFT_RFI Questions Template_Attch 0001
All questions and responses shall be sent via email to the Contracting Officer Ms. Licinda Peters and Contract Specialist Dr. Renee Bayton.
The Army Contracting Command (ACC) Aberdeen Proving Ground (APG) is hereby issuing the following:
REQUEST FOR INFORMATION (RFI)
For our Mission Partner: Product Manager for Wideband Enterprise Satellite Systems (PdM WESS)
Under Solicitation No. W15P7T-27-R-HMFT
DESCRIPTION
Product Manager Wideband Enterprise Satellite Systems (PdM WESS) is seeking information on companies with a comprehensive background in producing, installing and maintaining up to a quantity of nine state-of-the-art High Altitude Electromagnetic Pulse (HEMP) hardened medium fixed Satellite Communications Earth Terminals. PdM WESS is tentatively planning to acquire these terminals to be installed within the continental United States. The Government tentatively plans to issue a solicitation for a HEMP Hardened Medium Fixed SATCOM Terminal that operates in X Band, with selective polarization operation. The North American Industry Classification System Code (NAICS) for this requirement is 517410: Satellite Telecommunications.
Synopsis:
Request for Information (RFI) for a potential requirement for production, installation and sustainment support of high-altitude electromagnetic pulse (HEMP) hardened satellite communications terminals.
This is an RFI only. This notice is issued solely for information and planning purposes and does not constitute a Request For Proposal (RFP) or a promise to issue an RFP in the future. The information provided in this notice is subject to change and is not binding on the government.
RESPONSES (REVISED as of 10/14/26)
Please submit your RFI responses for the above requested information in PDF or Microsoft Word format no later than (NLT) Noon EST on 159October 2026 to Dr. Renee J Bayton, Contract Specialist at renee.j.bayton.civ@army.mil and Licinda M Peters, Contracting Officer at licinda.m.peters.civ@army.mil
Please find attached the RFI document and W15P7T-27-R-HMFT_RFI Questions & Answers
All questions and responses shall be sent via email to the Contracting Officer Ms. Licinda Peters and Contract Specialist Dr. Renee Bayton.
Attachments/Links
Download All Attachments/Links
Attachments
Document
File Size
Access
Updated Date
W15P7T-27-R-HMFT_RFI Questions Template_Attch 0001.xlsx (opens in new window)
12 KB
Public
Sep 29, 2026
RFI_Army HEMP HMFT Terminal_28Sept2026.docx (opens in new window)
28 KB
Public
Sep 29, 2026
Contact Information
Contracting Office Address
- HQ CECOM CONTRACTING CENTER 6565 SURVEILLANCE LOOP
- ABERDEEN PROVING GROU, MD 21005-1846
- USA
Primary Point of Contact
- Licinda Peters
- licinda.m.peters.civ@army.mil
Secondary Point of Contact
- Renee J. Bayton
- renee.j.bayton.civ@army.mil
History - original posted on Sam.gov
- Sep 29, 2026 01:43 pm EDTSources Sought (Original)
Overview
Agency:
Department of WarDepartment of the Army
Office:AMC.ACC.ACC-CTRS.ACC-APG.W6QK ACC-APG
Posted:October 15, 2026
NAICS:517410: Satellite Telecommunications
Last Updated:Oct 21, 2026
First published:
Last updated on SAM.gov:
PSC:Not specified
Set-Aside:No Set aside used
Type:Sources Sought
Place of Performance:Not specified
Award Overview
Possible prior contracts
Sign in to see possible prior contracts for this requirement (matched by agency, NAICS and place of performance; not confirmed).
Contacts
Contracting Officer
Primary Contact
Licinda Peters
Secondary Contact
Renee J. Bayton
Documents
Lifecycle
- 1Version 1Sources SoughtCurrent
Extended Army Contracting Command (ACC) Aberdeen Proving Ground (APG) High Altitude Electromagnetic Pulse (HEMP) hardened medium fixed Satellite Communications Earth Terminals Request for Information (RFI)
Similar Opportunities
Title | Phase | Agency | NAICS | Set Aside | Posted | Deadline | Location |
|---|---|---|---|---|---|---|---|
The Army Contracting Command (ACC) Aberdeen Proving Ground (APG) is hereby issuing the following: REQUEST FOR INFORMATION (RFI) For our Mission Partner: Product Manager for Wideband Enterprise Satellite Systems (PdM WESS) Under Solicitation No. W15P7T-27-R-HMFT DESCRIPTION Product Manager Wideband Enterprise Satellite Systems (PdM WESS) is seeking information on companies with a comprehensive background in producing, installing and maintaining up to a quantity of nine state-of-the-art High Altitude Electromagnetic Pulse (HEMP) hardened medium fixed Satellite Communications Earth Terminals. PdM WESS is tentatively planning to acquire these terminals to be installed within the continental United States. The Government tentatively plans to issue a solicitation for a HEMP Hardened Medium Fixed SATCOM Terminal that operates in X Band, with selective polarization operation. The North American Industry Classification System Code (NAICS) for this requirement is 517410: Satellite Telecommunications. Synopsis: Request for Information (RFI) for a potential requirement for production, installation and sustainment support of high-altitude electromagnetic pulse (HEMP) hardened satellite communications terminals. This is an RFI only. This notice is issued solely for information and planning purposes and does not constitute a Request For Proposal (RFP) or a promise to issue an RFP in the future. The information provided in this notice is subject to change and is not binding on the government. QUESTIONS All questions related to the RFI shall be submitted no later than (NLT) 1200 Noon EST on 07 October 2026 via email Dr. Renee J Bayton, Contract Specialist at renee.j.bayton.civ@army.mil and Licinda M Peters, Contracting Officer at licinda.m.peters.civ@army.mil. Respondents who submit questions in response to the RFI, are requested to use Attachment 0001 “RFI Question Template.” The completed question template should be attached to the email as an Excel document. RESPONSES Please submit your RFI responses for the above requested information in PDF or Microsoft Word format no later than (NLT) Noon EST on 15 October 2026 to Dr. Renee J Bayton, Contract Specialist at renee.j.bayton.civ@army.mil and Licinda M Peters, Contracting Officer at licinda.m.peters.civ@army.mil Please find attached the RFI document and W15P7T-27-R-HMFT_RFI Questions Template_Attch 0001 All questions and responses shall be sent via email to the Contracting Officer Ms. Licinda Peters and Contract Specialist Dr. Renee Bayton. | Market Research | 517410 | No Set-Aside | 09/29/2026 | 10/15/2026 | - | |
Updated on 02 December 2025 to: 1. Extend the RFI date to 19 December 2025 2. Update the Contract Specialist POC information. Original Posting Digital Intermediate Frequency RFI Solicitation Number: W15P7T26RDIGIF Notice Type: Sources Sought Synopsis: Product Manager Wideband Enterprise Satellite Systems (PdM WESS), located at Fort Belvoir, VA, is chartered and funded to develop the first increment of a Digital Intermediate Frequency (Digital IF) solution. PdM WESS is seeking information from qualified systems integrators capable of engineering, integrating, testing, and installing the foundational infrastructure for a Digital IF architecture. This solution will establish a flexible, modular standards based Digital IF architecture across up to 18 large SATCOM teleport sites worldwide. PdM WESS aims to identify vendors with technical expertise to deliver a resilient SATCOM ground segment solution that supports scalability, interoperability, and long-term sustainment. Interested vendors should demonstrate capabilities in system design, integration, and maintenance of complex SATCOM infrastructure aligned with PdM WESS’s modernization objectives. Additionally, respondents are requested to include information on any existing contract vehicles through which PdM WESS may engage their services. Large and small businesses capable of delivering such SATCOM ground segment Digital IF infrastructure are requested to respond to this RFI. Such business may include those experienced in providing DoD SATCOM modems, terminals, and terminal equipment experienced in developing systems based on DIFI Standard (IEEE-ISTO 4900-2021) or VITA Radio Transport (VRT, ANSI/VITA 49.2) compliant Digital IF interfaces experienced in deploying Digital IF ground segment systems for SATCOM or otherwise experienced in installation and maintenance relevant to DOD teleports, i.e. SATCOM teleports. Small business is defined by North American Industry Association Classification System (NAICS) "Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing" 334220, (750 employees or less). PdM WESS is seeking to: integrate Digital IF technologies into the DOD SATCOM ground segment architecture to gain operational advantages in growth and resilience ensure interoperability of all Digital IF equipment at and between all DOD teleports employ seamless integrated management and control (M&C) automation ensure IF performance adequate to support Wideband Global System (WGS) operations, including formal WGS certification as appropriate ensure site-to-site IF level interoperability enabled by wide area network (WAN) transport establish a baseline capable of expansion WRT both capability and capacity The target Digital IF ground segment architecture generally requires the following functions: High speed Digital IF network Automated Digital IF signal chain management Digital IF Modem (DM) Digital IF Combiner/Divider (CD) Digital IF Conversion (IFC) Flexibility to support eventual growth into direct RF Conversion (RFC) to replace IFC Digital IF domain Test, Measurement, and Diagnostic Equipment (TMDE) Flexible Point of Presence (PoP) for WAN transport Ensure intra-theatre regional (CONUS, EUCOM, SWA, INDOPACOM) connectivity and ability to failover to alternate sites within each theatre’s footprint The Government seeks information on the availability of equipment, subsystems, software, systems integration expertise, and logistics support capable of addressing the following Digital IF ground segment needs: Resilient high-availability Digital IF networking Digital IF equipment such as CDs and IFCs Automation of Digital IF system management WRT mission description, scheduling, implementation, and status reporting WGS Certification of Digital IF systems Support for third party Digital IF Modems such as the emerging Enterprise Digital IF Multi-Carrier Modem (EDIM Modem) DOD teleport integration, installation, testing, and immediate and ongoing logistics and software support Support for future growth in capacity, waveform support, and Digital IF capability Information Requested: Interested vendors are asked to provide the following specific information: Company: Name, address, and Commercial and Government Entity (CAGE) code. Point of Contact: Name address, phone number, and e-mail. Digital IF Network: The means of implementing a high reliability Digital IF Local Area Network (LAN) at SATCOM sites delivering the following: Adequate capacity to support up to 256 duplex missions, ranging each from 32 kilosymbols per second (32 ksym/s) to 200 Megasymbols per second (200 Msym/s), and averaging at least 20 Msym/s each uplink and downlink Spine-leaf architecture enabling horizontal growth as well as equipment failure recovery, switch maintenance, upgrade, and retrofit with no Digital IF mission down-time Connectivity to Points of Presence (PoPs) to reach external Digital IF components accessible via Wide Area Network (WAN) Ability to accommodate potential Digital IF stream compression, Forward Error Correction (FEC), and bulk Digital IF stream encryption over WAN Digital IF Equipment: The means of delivering Digital IF domain equipment in support of operations as follows: CDs and IFCs adequate to support up to 256 duplex FDMA missions over up to 12 aggregate signal chains (antenna, RF band, and polarity); for example, up to 4 antennas, each antenna supporting 3 duplex aggregates (X-Band, Ka left hand polarized, and Ka right hand polarized), for a total of 12 duplex feeds. Conformance with IEEE-ISTO 4900-2021 (DIFI Standard) Information Class 0x0000 for immediate support of Frequency Division Multiple Access (FDMA) waveforms Upgradability to support future DIFI Standard information classes for the sake of Transport efficient Multi-Frequency Time Division Multiple Access (MF-TDMA) operation (i.e. burst waveform support at changing center frequencies) Transport efficient Frequency Hop Spread Spectrum (FHSS) operation (i.e. burst waveforms at quickly changing center frequencies) Direct Sequence Spread Spectrum (DSSS) operation (i.e. high sample rates and bit depths) Support for Digital IF functions (DM, CD, IFC, and in the future, RFC) using equipment from multiple vendors interchangeably Digital IF domain TMDE for on-site test as well as Digital IF domain mission monitoring. M&C Automation: The means of delivering integrated Digital IF system management: Digital IF equipment suite management to include equipment status and utilization Ability to support Digital IF signal chains employing IFCs or RFCs interchangeably Digital IF mission management to include mission scheduling, implementation, and status Signal chain orchestration (assignment of equipment to missions) and subsequent equipment configuration Mission status logging and reporting Documented Northbound Application Programming Interface (API) supporting enterprise machine-machine interfaces enabling the following automated functions: Mission download Mission acceptance or rejection Mission status Mission updates Configuration management to support updates and upgrades to all Digital IF functions (DM, CD, IFC, RFC) by all vendors Cybersecurity considerations to include: Support for Zero Trust Architecture (ZTA) Support for Risk Management Framework (RMF) accreditation of overarching SATCOM site management system WGS Certification: Develop a solution capable of complying with the Wideband Global Satellite (WGS) certification process and emerging Digital IF MIL standards. DM Support: The means of supporting third party DMs, including Digital IF interoperability and management. To begin with FDMA operations, e.g. EDIM Modem With the capacity to grow into MF-TDMA, FHSS, and DSSS waveforms employing emerging DIFI Standard information classes for stream rate efficiency SATCOM Teleport Integration: The means of integrating this Digital IF system into DOD SATCOM teleport sites, to include: IF integration at L-Band with Modernization of Enterprise Terminal (MET) systems (i.e. AN/GSC-52B(V)) Data traffic network integration WRT third party DMs M&C network integration in support of comprehensive management automation Subsequent installation of this initial increment of Digital IF infrastructure, as described, at up to 18 sites worldwide Comprehensive testing to include mission failure detection and reassignment to alternate SATCOM facilities over WAN Logistics: The ability to deliver logistics support to include operator documentation, training, technical support, depot and repair support, maintenance, and configuration management Future Growth: The means of supporting ongoing upgrades to capabilities and capacity Disclaimers: This RFI is for planning purposes only and shall not be misconstrued to create an obligation on the part the Government to enter into any agreement, nor to implement the contemplated actions, nor to serve as the basis for any claim for reimbursement for any costs associated with the preparation of responses submitted to the RFI. Questions regarding this announcement shall be submitted in writing by e-mail to the Contracting Officer. Verbal questions will NOT be accepted. Answering this request: Please furnish the above requested information by Friday, December 19, 2025 at 4:00pm EST. Please submit the requested information in PDF or Microsoft Word format to Keith Magaw, Contract Specialist at keith.a.magaw.civ@army.mil or Kristin Dacey, Contracting Officer at kristin.l.dacey2.civ@army.mil. Questions can also be submitted on the CHESS site. | Market Research | 517410 | No Set-Aside | 12/02/2025 | 12/19/2026 | Fort Belvoir, VA | |
Digital Intermediate Frequency RFI Solicitation Number: W15P7T26RDIGIF Notice Type: Sources Sought Synopsis: Product Manager Wideband Enterprise Satellite Systems (PdM WESS), located at Fort Belvoir, VA, is chartered and funded to develop the first increment of a Digital Intermediate Frequency (Digital IF) solution. PdM WESS is seeking information from qualified systems integrators capable of engineering, integrating, testing, and installing the foundational infrastructure for a Digital IF architecture. This solution will establish a flexible, modular standards based Digital IF architecture across up to 18 large SATCOM teleport sites worldwide. PdM WESS aims to identify vendors with technical expertise to deliver a resilient SATCOM ground segment solution that supports scalability, interoperability, and long-term sustainment. Interested vendors should demonstrate capabilities in system design, integration, and maintenance of complex SATCOM infrastructure aligned with PdM WESS’s modernization objectives. Additionally, respondents are requested to include information on any existing contract vehicles through which PdM WESS may engage their services. Large and small businesses capable of delivering such SATCOM ground segment Digital IF infrastructure are requested to respond to this RFI. Such business may include those experienced in providing DoD SATCOM modems, terminals, and terminal equipment experienced in developing systems based on DIFI Standard (IEEE-ISTO 4900-2021) or VITA Radio Transport (VRT, ANSI/VITA 49.2) compliant Digital IF interfaces experienced in deploying Digital IF ground segment systems for SATCOM or otherwise experienced in installation and maintenance relevant to DOD teleports, i.e. SATCOM teleports. Small business is defined by North American Industry Association Classification System (NAICS) "Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing" 334220, (750 employees or less). PdM WESS is seeking to: integrate Digital IF technologies into the DOD SATCOM ground segment architecture to gain operational advantages in growth and resilience ensure interoperability of all Digital IF equipment at and between all DOD teleports employ seamless integrated management and control (M&C) automation ensure IF performance adequate to support Wideband Global System (WGS) operations, including formal WGS certification as appropriate ensure site-to-site IF level interoperability enabled by wide area network (WAN) transport establish a baseline capable of expansion WRT both capability and capacity The target Digital IF ground segment architecture generally requires the following functions: High speed Digital IF network Automated Digital IF signal chain management Digital IF Modem (DM) Digital IF Combiner/Divider (CD) Digital IF Conversion (IFC) Flexibility to support eventual growth into direct RF Conversion (RFC) to replace IFC Digital IF domain Test, Measurement, and Diagnostic Equipment (TMDE) Flexible Point of Presence (PoP) for WAN transport Ensure intra-theatre regional (CONUS, EUCOM, SWA, INDOPACOM) connectivity and ability to failover to alternate sites within each theatre’s footprint The Government seeks information on the availability of equipment, subsystems, software, systems integration expertise, and logistics support capable of addressing the following Digital IF ground segment needs: Resilient high-availability Digital IF networking Digital IF equipment such as CDs and IFCs Automation of Digital IF system management WRT mission description, scheduling, implementation, and status reporting WGS Certification of Digital IF systems Support for third party Digital IF Modems such as the emerging Enterprise Digital IF Multi-Carrier Modem (EDIM Modem) DOD teleport integration, installation, testing, and immediate and ongoing logistics and software support Support for future growth in capacity, waveform support, and Digital IF capability Information Requested: Interested vendors are asked to provide the following specific information: Company: Name, address, and Commercial and Government Entity (CAGE) code. Point of Contact: Name address, phone number, and e-mail. Digital IF Network: The means of implementing a high reliability Digital IF Local Area Network (LAN) at SATCOM sites delivering the following: Adequate capacity to support up to 256 duplex missions, ranging each from 32 kilosymbols per second (32 ksym/s) to 200 Megasymbols per second (200 Msym/s), and averaging at least 20 Msym/s each uplink and downlink Spine-leaf architecture enabling horizontal growth as well as equipment failure recovery, switch maintenance, upgrade, and retrofit with no Digital IF mission down-time Connectivity to Points of Presence (PoPs) to reach external Digital IF components accessible via Wide Area Network (WAN) Ability to accommodate potential Digital IF stream compression, Forward Error Correction (FEC), and bulk Digital IF stream encryption over WAN Digital IF Equipment: The means of delivering Digital IF domain equipment in support of operations as follows: CDs and IFCs adequate to support up to 256 duplex FDMA missions over up to 12 aggregate signal chains (antenna, RF band, and polarity); for example, up to 4 antennas, each antenna supporting 3 duplex aggregates (X-Band, Ka left hand polarized, and Ka right hand polarized), for a total of 12 duplex feeds. Conformance with IEEE-ISTO 4900-2021 (DIFI Standard) Information Class 0x0000 for immediate support of Frequency Division Multiple Access (FDMA) waveforms Upgradability to support future DIFI Standard information classes for the sake of Transport efficient Multi-Frequency Time Division Multiple Access (MF-TDMA) operation (i.e. burst waveform support at changing center frequencies) Transport efficient Frequency Hop Spread Spectrum (FHSS) operation (i.e. burst waveforms at quickly changing center frequencies) Direct Sequence Spread Spectrum (DSSS) operation (i.e. high sample rates and bit depths) Support for Digital IF functions (DM, CD, IFC, and in the future, RFC) using equipment from multiple vendors interchangeably Digital IF domain TMDE for on-site test as well as Digital IF domain mission monitoring. M&C Automation: The means of delivering integrated Digital IF system management: Digital IF equipment suite management to include equipment status and utilization Ability to support Digital IF signal chains employing IFCs or RFCs interchangeably Digital IF mission management to include mission scheduling, implementation, and status Signal chain orchestration (assignment of equipment to missions) and subsequent equipment configuration Mission status logging and reporting Documented Northbound Application Programming Interface (API) supporting enterprise machine-machine interfaces enabling the following automated functions: Mission download Mission acceptance or rejection Mission status Mission updates Configuration management to support updates and upgrades to all Digital IF functions (DM, CD, IFC, RFC) by all vendors Cybersecurity considerations to include: Support for Zero Trust Architecture (ZTA) Support for Risk Management Framework (RMF) accreditation of overarching SATCOM site management system WGS Certification: Develop a solution capable of complying with the Wideband Global Satellite (WGS) certification process and emerging Digital IF MIL standards. DM Support: The means of supporting third party DMs, including Digital IF interoperability and management. To begin with FDMA operations, e.g. EDIM Modem With the capacity to grow into MF-TDMA, FHSS, and DSSS waveforms employing emerging DIFI Standard information classes for stream rate efficiency SATCOM Teleport Integration: The means of integrating this Digital IF system into DOD SATCOM teleport sites, to include: IF integration at L-Band with Modernization of Enterprise Terminal (MET) systems (i.e. AN/GSC-52B(V)) Data traffic network integration WRT third party DMs M&C network integration in support of comprehensive management automation Subsequent installation of this initial increment of Digital IF infrastructure, as described, at up to 18 sites worldwide Comprehensive testing to include mission failure detection and reassignment to alternate SATCOM facilities over WAN Logistics: The ability to deliver logistics support to include operator documentation, training, technical support, depot and repair support, maintenance, and configuration management Future Growth: The means of supporting ongoing upgrades to capabilities and capacity Disclaimers: This RFI is for planning purposes only and shall not be misconstrued to create an obligation on the part the Government to enter into any agreement, nor to implement the contemplated actions, nor to serve as the basis for any claim for reimbursement for any costs associated with the preparation of responses submitted to the RFI. Questions regarding this announcement shall be submitted in writing by e-mail to the Contracting Officer. Verbal questions will NOT be accepted. Answering this request: Please furnish the above requested information by Friday, December 12, 2025 at 4:00pm EST. Please submit the requested information in PDF or Microsoft Word format to Tyce Rucks, Contract Specialist at tyce.l.rucks.civ@army.mil or Kristin Dacey, Contracting Officer at kristin.l.dacey2.civ@army.mil. Questions can also be submitted on the CHESS site. | Market Research | 517410 | No Set-Aside | 11/24/2025 | 12/08/2026 | Fort Belvoir, VA | |
Internet Services | Market Research | 517110 | No Set-Aside | 10/16/2026 | 10/23/2026 | Huntsville, AL | |
Cable services in accordance with the statement of work | Solicitation | 517410 | Total Small Business Set-Aside | 09/17/2026 | 09/23/2026 | Perry Point, MD |
Additional Details
Solicitation Number
W15P7T-27-R-HMFT-R
Archive Date
Nov 3, 2026
Office Address
ABERDEEN PROVING GROU, MD, 21005-1846