C2 Cross Functional Team (CFT) Broad Agency Announcement
Active, responses due . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 PM EDT
- Posted
- April 1, 2026
- Notice type
- Presolicitation
- NAICS
- 334290: Other Communications Equipment Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- AMC.ACC.ACC-CTRS.ACC-APG.W6QK ACC-APG
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- BAA-25-R-C2CFT
- Notice ID
- 34e8be6e2d784d3c80c45c26fc033072
Description
UPDATE 1 APRIL 2026
The Government is no longer pursuing requirements associated with TEM 14. This includes Topic Areas 1, 2 and 3. Thank you for your patience and understanding.
UPDATE 20 MARCH 2026
There are no further updates as of 20 March 2026. Any updates on TEM 14 actions will be posted here on SAM.Gov. Thank you for your patience.
UPDATE 4 DECEMBER 2025
The purpose of this notice is to share an update regarding the Calls for White Papers (CfWPs) aligned to TEM 14.
- Topic Areas 1, 2 & 3: An updated timeline will be provided on SAM.GOV no later than 15 January 2026.
UPDATE 10 SEPTEMBER 2025
The purpose of this notice is to share an update regarding the Calls for White Papers (CfWPs) aligned to TEM 14.
- Topic Area 1: The Government will host Technological Demonstrations on 25 September. Vendors selected to provide a Technological Demonstration will be notified via direct e-mail correspondence. Vendors not selected to provide a Technological Demonstration will also be notified via direct e-mail correspondence.
- Topic Areas 2 & 3: An updated timeline will be provided on SAM.GOV no later than 1 December 2025.
UPDATE 5 SEPTEMBER 2025
The purpose of this notice is to share an update regarding the schedule associated with Calls for White Papers (CfWPs) aligned to TEM 14. The Government will not conduct Technological Demonstrations between 8-12 September 2025 as specified in the CfWPs. Another update will be provided once the Government identifies an updated timeline.
UPDATE 30 JUNE 2025
Please see the attachments section of this SAM.gov TEM 14 posting for the three (3) updated Call for White Paper (CfWP) files. A copy of the BAA and BAA Compliance Checklist has also been included for potential vendors convenience. Submit your WP's IAW all submission instructions.
UPDATE: 21 APRIL 2025
A Draft Call for White Paper (CfWP) comment section, thru the TEM 14 Community, is currently open via the Joint Communication Marketplace at https://jtnc.sites.crmforce.mil/. Please note: registration to the Community will be required for submitting comments. Please see the Attachments/Links Section of this SAM posting to view the pdf file draft CfWP's for TEM 14.
I. INTRODUCTION
The BAA, announcement number BAA-25-R-C2CFT, is sponsored by the U.S. AFC, C2-CFT and will be open for five (5) years from the date of original issue. This BAA will be valid through 23 March 2030, unless terminated sooner. This BAA includes research interests from the C2-CFT/PEO C3N (located at APG, Maryland and or other Government agencies).
U.S. AFC leads a continuous transformation of Army modernization in order to provide future warfighters with the concepts, capabilities, and organizational structures needed to dominate a future battlefield. The C2-CFT was established to address the most pressing challenges to the tactical network that our soldiers use on the battlefield. The C2-CFT brings the Warfighters, developers and testers to the center of the acquisition process through focused integration and disciplined innovation, enabling the Army to deliver leader-approved technology capabilities to warfighters. The C2-CFT is focused on integration of tactical network efforts and C3I systems and ensures disciplined innovation as it works with speed and precision. The C2-CFT is conducting experimentations and demonstrations of proven joint and special operations solutions, commercial- off-the-shelf (COTS) technology, and Non-developmental items (NDIs) with operational units to inform future requirements. The C2-CFT is promoting research to assist the Army with modernizing network with technology currently available.
A. GENERAL INFORMATION
This BAA is issued under the provisions of Parts 35.016 and 6.102(d)(2)(i) of the Federal Acquisition Regulation (FAR), providing for the competitive selection of R&D proposals submitted in response to this announcement. To be eligible for consideration and possible award, the technology or methodology shall be either basic research, applied research, advanced technology development not for a specific system/HW, or demonstration and validation. This BAA may be used by agencies to fulfill their requirements for scientific study and experimentation directed toward advancing the state-of-the-art or increasing knowledge or understanding rather than focusing on a specific system or HW solution; however, this BAA shall only be used when meaningful proposals with varying technical/scientific approaches can be reasonably anticipated.
1. Basic Research
Defined as research directed toward increasing knowledge in science with the primary aim being a fuller knowledge or understanding of the subject under study, rather than any practical application of that knowledge.
2. Applied Research
Is an effort that normally follows basic research, but may not be severable from the related basic research; attempts to determine and exploit the potential of scientific discoveries or improvements in technology, materials, processes, methods, devices, or techniques; and attempts to advance the state- of-the-art.
3. Development
Defined as the systematic use of scientific and technical knowledge in the design, development, testing, or evaluation of a potential, new product or service (or of an improvement in an existing product or service) to meet specific performance requirements or objectives. It includes the functions of design engineering, prototyping, and engineering testing; it excludes subcontracted technical effort that is for the sole purpose of developing an additional source for an existing product.
B. BAA ELEMENTS AND OVERVIEW
1. This is a hybrid BAA combining elements of an open, two-phased, reviewing process. Phase I is an open call for White Papers (WP) addressing four Command and Control Cross Functional Team (C2-CFT) R&D focus areas: the Unified Network; the Common Operating Environment; Joint and Coalition Interoperability; Command Post Mobility and Survivability. Phase II is the process where the C2-CFT Program Manager will invite selected offerors whose White Papers are best suited to fulfill the government’s R&D requirements to submit proposals for award consideration.
An open BAA allows for WP submittals at any time until the expiration of this BAA. The Government reserves the right to not evaluate a WP submitted for topics other than the one identified in this BAA. Selection for PHASE II may or may not occur based on a variety of factors including, but not limited to, funding availability, relevancy and feasibility.
The WP’s and proposals will be evaluated according to the instruction described herein.
-
- Phase One (1):
- Step One (1) - Submission of WP
- Phase One (1):
Based on the WP evaluation, the Government shall make a decision to select Offeror (s) to participate in a no-cost technological demonstration or go directly to Phase two (2) Submission of Proposals.
-
-
- Step Two (2) – Technological Demonstration (By Invitation Only)
-
-
- Phase Two (2): Submission of Proposals (By Invitation Only)
Full proposals are requested from those potential Offerors selected in the Phase one (1) evaluation process. When proposals are received, they are evaluated and selected according to the procedures described herein.
While this BAA will remain open, allowing WP submission at any time, the Government might also issue requests transmitted via “calls for WP,” using the SAM site, via https:// www.sam.gov and JCM (Joint Tactical Networking Center) site, via https://jtnc.experience.crmforce.mil/JTNC/s/limited-public/ bringing attention to one or more areas of interest requesting potential Offerors to submit a WP. The “calls for WP” might further define the technology/Government needs etc. or will simply request a WP for a specific topic.
2. WP’s may be submitted at any time while this BAA remains open, as well as in direct response to a call. The Government may award a contract or other transaction at any time while this BAA remains open. An award may also be made after the BAA expiration date if the WP is received before the expiration date occurs. This award may occur no later than six (6) months after the BAA expiration date. Offerors that submit a proposal without first submitting a WP and receiving an invitation from the Government to submit a proposal will not be eligible for award.
3. This announcement must be general in nature, identify the areas of research interest, include criteria for submitting and evaluating WPs, and solicit the participation of all Offerors capable of satisfying the Government's needs. Proposals that are selected for award are considered to be the result of full and open competition and in full compliance with the provisions of PL 98-369, the Competition in Contracting Act of 1984. Resulting agreements may be in the form of purchase orders, contracts, grants, or cooperative agreements depending upon the specifics of the effort, such as extent of Government involvement, actual scope of work, and cost.
4. The C2-CFT encourages industry interested in conducting scientific research, educational institutions, small businesses, and small disadvantaged business concerns, historically black colleges, university and minority business enterprises and institutions to submit WP’s.
5. The Government will consider the integrity and validity of Contractor Teaming Arrangements, as set forth in FAR Subpart 9.6, or Defense R&D Pools as set forth in FAR Subpart 9.7.
The Offeror, certifies that the Offeror is not debarred, suspended, declared ineligible for award of public contracts, grants, agreements, or has been proposed for debarment pursuant to FAR 9.406-2. If the Offeror cannot certify, or if the status of the Offeror changes prior to award, the Offeror must provide detailed information as to its current award eligibility.
6. This BAA is an expression of interest only and does not commit the Government to make an award, nor pay for a vendor’s WP proposal preparation costs. The cost of WP and proposal preparation for response to a BAA is not considered an allowable direct charge to any follow-on award or agreement entered into with the government. Any award will be made subject to the availability of appropriated funds. The prospective Offeror will be reminded that only a duly warranted Contracting Officer (KO), from the U.S. Army Contracting Command, may obligate the Government to an agreement involving expenditure of Government funds. The Government reserves the right to fund all, some, one, or none of the WP’s or proposals received under this BAA. The Government anticipates making multiple awards subject to availability of funds.
7. This BAA may be amended to add new topics. Interested parties should be alert for any BAA amendments that may be published on the SAM site, via https://www.sam.gov and on the JCM site, via https://jtnc.experience.crmforce.mil/JTNC/s/limited-public.
C. POINTS OF CONTACT
- All submissions, technical questions, or clarifications shall be submitted via the JCM site, via https://jtnc.experience.crmforce.mil/JTNC/s/limited-public included on the subject line BAA-25-R-C2CFT (i.e. Call for WP Number & Topic/Subtopic Number). No discussions by the technical staff are to be held with Offeror after proposal submission without PRIOR authorization from the KO.
- Contractual questions shall be directed to the cognizant ACC representative identified in SAM.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
Files (8)
- Download
Final CfWP Topic 0002.pdf
186 KBAdded in Presolicitation version 6Posted - Download
Final CfWP Topic 0001.pdf
351 KBAdded in Presolicitation version 6Posted - Download
BAA Compliance Checklist-Rev5.pdf
257 KBAdded in Presolicitation version 6Posted - Download
Final - CfWP Topic 0003 - Operational Modeling Capabilities - Tools.pdf
182 KBAdded in Presolicitation version 6Posted - Download
Draft - CfWP Topic 0003 - Operational Modeling Capabilities - Tools 2.pdf
644 KBAdded in Presolicitation version 5Posted - Download
Draft - CfWP Topic 0002.pdf
652 KBAdded in Presolicitation version 5Posted - Download
Draft - CfWP Topic 0001.pdf
372 KBAdded in Presolicitation version 5Posted - Download
C2 CFT BAA - updated 11 April 2025.pdf
444 KBAdded in Presolicitation version 4Posted
Lifecycle
- 1
- 2Version 2Presolicitation
C2 Cross Functional Team (CFT) Broad Agency Announcement
- 3Version 3Presolicitation
C2 Cross Functional Team (CFT) Broad Agency Announcement
- 4Version 4Presolicitation
C2 Cross Functional Team (CFT) Broad Agency Announcement
- 5Version 5Presolicitation
C2 Cross Functional Team (CFT) Broad Agency Announcement
- 6Version 6Presolicitation
C2 Cross Functional Team (CFT) Broad Agency Announcement
- 7Version 7Presolicitation
C2 Cross Functional Team (CFT) Broad Agency Announcement
- 8Version 8Presolicitation
C2 Cross Functional Team (CFT) Broad Agency Announcement
- 9Version 9Presolicitation
C2 Cross Functional Team (CFT) Broad Agency Announcement
- 10Version 10Presolicitation
C2 Cross Functional Team (CFT) Broad Agency Announcement
- 11Version 11PresolicitationCurrent
C2 Cross Functional Team (CFT) Broad Agency Announcement
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Amendment 0001. See the revised attachments and attached question and answer. | - | Solicitation | 09/18/2026 |
amended to change PSC Code and NAICS Code. Telecommunication Items | - | Combined Synopsis | 09/07/2026 |
As of today, Thursday, 11 November 2026, this Call for Solutions is Amended under No. 0002 to incorporate the questsion and comments submitted to APG and the government's responses. Additionally attached is a red-lined document showing all changes to the Call for Solutions as well as a clean version of the CfS incorporating all changes. No extension to the due date for solution submissions within this CfS are offered at this time. Capability Program Executive Command and Control Information Network (CPE C2IN) Commercial Solution Opening (CSO) Call for Solutions (CfS) for Product Manager Wideband Enterprise Satellite Systems (PdM WESS) Commercial Digital Intermediate Frequency Subsystem (DIFS) under the Army Open Solicitation (AOS) Commercial Solutions Opening (CSO) Project Office/Customer Product Manager Wideband Enterprise Satellite Systems (PdM WESS) Contracting Activity Army Contracting Command – Aberdeen Proving Ground (ACC-APG) CSO Number Army Open Solicitation (AOS) - W9128Z-25-S-A002 Call for Solution Title Commercial Digital Intermediate Frequency Subsystem (DIFS) under the Army Open Solicitation (AOS) Commercial Solutions Opening (CSO) Contracting Points of Contact Contracting Officer: Licinda Peters Email: licinda.m.peters.civ@army.mil Contract Specialist: Keith Magaw Email: keith.a.magaw.civ@army.mil Questions Due Date/Time 05 November 2026 at noon Eastern Standard Time (EST) Solution Brief Due Date/Time 10 December 2026 at noon Eastern Standard Time (EST) Submit Solution Brief Via Sam.gov and AOS Controlled by U.S. Army Controlled by: PdM WESS CUI Category: Operations Security (OPSEC) Limited Dissemination Control: FEDCON POC: licinda.m.peters.civ@army.mil SECTION 1 - INTRODUCTION BACKGROUND Product Manager Wideband Enterprise Satellite Systems (PdM WESS) is seeking solutions for a Commercial-Off-The-Shelf (COTS) Digital Intermediate Frequency (IF) system to satisfy the requirements for Increment 1 of this modernization effort. The current legacy analog infrastructure limits scalability, resilience, and interoperability. Under this Call for Solutions, the selected vendor will deliver, integrate, install, and acceptance-test a flexible, open-standard, modular Digital IF solution across up to twenty (20) worldwide satellite communications (SATCOM) teleport sites. Increment 1 will establish a fully operational baseline designed to support subsequent capability upgrades and integrations in future fiscal years. SECTION 2 – REQUIREMENT DESCRIPTION PROBLEM STATEMENT Area of Interest: Modular Digital Intermediate Frequency Solutions for Next-Generation SATCOM Teleports Background & Operational Context Current Department of War (DoW) satellite communications (SATCOM) ground infrastructure relies heavily on legacy L-Band Intermediate Frequency (IF) distribution systems. These analog-hardware-bound architectures limit flexibility, inhibit rapid tech insertion, and create single points of failure across global teleport infrastructures. To counter emerging near-peer threats in dynamic operational environments, the warfighter requires highly resilient, agile, and rapidly scalable SATCOM. The Problem The legacy L-Band architecture fails to offer the ability to dynamically route or transport Radio Frequency (RF) signals over DoW Internet Protocol (IP) networks. This lack of flexibility inhibits the resilience of geostationary earth orbit (GEO) SATCOM operations. To transition to a modern, flexible, software-defined ground segment, the DoW requires an open-standard Digital IF architecture. However, before committing to a full-scale global deployment, the DoW must validate the operation, interoperability, security, and performance of these modular commercial solutions in a rigorous representative environment. Technical Objective & Scope The DoW seeks a commercial solution for an Increment 1 Digital IF capability set built on a flexible, open standard (e.g., Digital Intermediate Frequency Interoperability compliant), modular architecture. The selected solution will undergo standard site acceptance testing and operational verification to confirm compliance with contract performance requirements and site compatibility. Upon successful acceptance, this operational configuration will serve as the standardized baseline for deployment and installation across up to twenty (20) worldwide SATCOM teleport sites. Mission Impact Successful validation and deployment of this flexible open-standard Digital IF architecture will directly enhance warfighter lethality and survivability by delivering a highly resilient, agile, and survivable GEO-SATCOM capability which rapidly adapts to contested/congested environments. SCOPE AND TECHNICAL OBJECTIVES The scope of this effort is to acquire, integrate, test, and field a commercially available or commercial-derivative Digital IF suite, and to operationalize it within existing DoW Teleports. The subsystem shall demonstrate the core capability to digitize analog L-band satellite signals, transport them over a high-speed digital network, and convert them back to analog signals, while handling native digital IF traffic from modems. The subsystem shall leverage mature commercial solutions with an emphasis on automation, reliability, and adherence to open standards, for example, the IEEE-ISTO Std 4900-2021 (DIFI) standard. The offeror shall propose a commercial solution that achieves the following high-level technical objectives, aligned with the core characteristics of the DoW modernization framework: Objective 1: Interoperable Digital IF Conversion (Modular & Open): The DIFS shall convert legacy analog L-band aggregate signals (950 MHz - 2.050 GHz) into standards-compliant Digital IF packet streams and vice versa. This includes both transmit (analog-to-digital) and receive (digital-to-analog) paths, conforming to the DIFI standard to prevent vendor lock-in. Objective 2: Advanced Digital Signal Processing (Adaptable): The commercial subsystem shall combine multiple, disparate Digital IF streams into a single aggregate (combined) stream for uplink and channelize a single aggregate (combined) downlink stream into multiple, individual Digital IF streams for processing. Objective 3: High-Performance Digital Transport (Scalable): The subsystem shall utilize a non-blocking, high-speed digital switch fabric to route Digital IF streams between all subsystem components and external interfaces (e.g., Digital Modems, Global Agile Integrated Transport (GAIT) connections, Wide Area Network (WAN) transport etc. The fabric shall support standard network scaling, redundancy, and high-throughput operations (up to 100 Gigabit Ethernet). The switch fabric shall provide a means for rapid reconfiguration of packet forwarding by the Automated Management and Control Function without the use of Layer 3 routing protocols. The switch fabric shall use deterministic multicast routing based on the incoming port without requiring strict multicast tables. Objective 4: Automated Management and Control (Empowered): The subsystem shall feature a software-based management suite. This software shall automate the establishment, termination, and monitoring of communication paths based on satellite access parameters, manage automatic protection switching for redundant components, and support automated rerouting of critical traffic to alternate facilities. Objective 5: Integrated Test and Diagnostics: The DIFS shall incorporate built-in test capabilities to generate, capture, and analyze Digital IF streams to allow for rapid troubleshooting, performance verification (e.g., Error Vector Magnitude (EVM) & spectral purity), and subsystem health monitoring with minimal operational burden and with on-site test equipment. Objective 6: Resilient and Maintainable Design (Resilient): The commercial solution shall be designed for high availability Ai ≥ 0.9998) a long service life (15 years), and rapid maintainability (MTTR ≤ 30 minutes), using standard line-replaceable items (LRIs). Objective 7: Secure and Compliant Architecture (Secure): The subsystem design shall be capable of achieving a Risk Management Framework (RMF) authorization for a security categorization of (Confidentiality, Moderate), (Integrity, Moderate), (Availability, Moderate). Objective 8: Achieve Military Compliance and Certification Readiness: The delivered commercial units and data packages shall be verified to meet the requirements of a strategic military environment. The subsystem performance shall adhere to applicable military standards, including SATCOM interoperability (MIL-STD-188-164C), electromagnetic interference (MIL-STD-461G), and environmental engineering (MIL-STD-810H). All testing, data, and documentation produced shall support Wideband Global SATCOM (WGS) terminal certification. Objective 9: Global Integration and Installation Support (Fieldable): The commercial solution provider shall provide the engineering services, site-specific technical expertise, and field support necessary to install, integrate, and configure the DIFS baseline across up to twenty (20) or more globally dispersed DoW Teleports, ensuring seamless interoperability with host facility infrastructure and legacy analog/digital interfaces. The Government will consider commercial solution approaches and vendors that fall along a spectrum of technological maturity, from capabilities that may require some further development to those that are fully commercialized and currently fielded. Deliverables The primary deliverable is a Full-Scale Engineering Development (FSED) DIFS (First Article) that successfully meets the objectives in Section 3.0, followed by optional production units. Associated deliverables include: Technical Data Package (TDP): A comprehensive TDP including interface specifications, commercial subsystem design documents, and standard test procedures. Electronic Technical Manual (ETM): A manual sufficient for trained technicians to operate, maintain, and troubleshoot the subsystem. New Equipment Training (NET): Training materials and courseware required to train operators and maintainers on the subsystem. Test Reports: First Article Testing (FAT) reports suitable for use as evidence for WGS certification. Logistics Demonstration: A verification demonstration of maintainability requirements (e.g., MTTR) performed by the offeror using the provided ETM, tools, and recommended spare parts. Integration Support: Technical support for system integration and government-led field verification. Risk Management Framework: Artifacts suitable for verification that the security architecture and included security controls are adequate for the security categorization. Programmatic Objectives & Commercial Acquisition Strategy This acquisition is conducted under the Army Open Solutions (AOS) to identify and procure mature, commercially available technologies using Other Procurement, Army (OPA) funds. The Government's objective is to verify a c, followed by the immediate execution of priced contract options for the procurement, installation, and sustainment of production-ready subsystems at up to twenty (20) or more DoW Teleports and strategic gateway sites worldwide. Program Schedule and Milestones The offeror shall propose a streamlined schedule based on commercial product availability and rapid verification milestones: Commercial Solution Technical Demonstration Physical Configuration Audit (PCA) / Baseline Review First Article Delivery First Article Testing (FAT) & Verification Logistics & Performance Demonstration Site Acceptance Testing (SAT) and Teleport Integration SECTION 3 – SUBMISSION AND SELECTION Selection of awardee is planned to be conducted using a three (3) step approach: Step 1 – Request for Solution Briefs, Step 2 – Pitch Session and/or Vendor Technical Demonstration (PS/VTD) and Step 3 – Proposal Submission. A multi-disciplined working group of technical experts will evaluate the solution Briefs on their own technical merit and not against other solutions. Solution Briefs, and Pitches and/or Demos will be evaluated based on adherence to the following submission and evaluation criteria. STEP: 1 – REQUEST FOR SOLUTION BRIEFS Parties with innovative solutions interested in being considered for this Digital IF solution shall submit a Solution Brief for review, prior to submission of a formal proposal. Solution Briefs that do not meet the requirements in this Call will not be considered. At the Government’s discretion, fully mature solutions, partial solutions, or solutions that are not commercially ready may either be awarded an Other Transaction (OT) to further mature the solution or retained in a library for three (3) months to be considered for contract or OT award at a later time. Not all fully matured solutions will be awarded a contract, nor will all partially mature or solutions that are not commercially available be given an OT award. The commercial solutions described in the solution Brief must clearly articulate relevancy to the technical objectives described in this Call, with a specific focus on delivering commercial capabilities to achieve objectives. No information submitted by an interested party in response to this Call will be returned. Submission of Solution Briefs shall adhere to the following general guidelines: Minimum of five (5) pages with a maximum of ten (10) pages or slides, not including the Coversheet, title page, or table of contents Times New Roman - not smaller than 12-point font type, although smaller font types may be used for figures, tables, and charts All Solution Briefs must be written in English Multiple Solution Briefs may be submitted for multiple solutions from the same Vendor A vendor’s standardized digital capability profile document will not be evaluated; Solution Briefs /White Papers must be submitted The Solution Brief shall address the following requirements/information: Capability Description: A detailed description of the product(s) or service(s) offered. Explain how the solution addresses the Objectives. Include technical specifications, performance data, and evidence of the solution's maturity or Technology Readiness Level (TRL). Company Experience and Past Performance: Provide a summary of the company’s experience in developing, producing, and sustaining DIFS-related capabilities for Department of Defense or other relevant customers. Production and Sustainment Approach: Describe the company's ability to scale production to meet potential demand, a proposed timeline required to scale to production, the number of units currently available for shipment, the current production rate, the number of units available for delivery per month if scaled, and its approach to providing training, field service support, long-term sustainment, and supply chain risk management. Pricing Structure: Provide a notional pricing structure for the proposed capabilities. This should include pricing for single units and an explanation of available discounts for range-based quantity purchases (e.g., 1-10 units, 11-50 units, 51+ units). Pricing for yearly sustainment and service agreements should also be addressed. Global Integration and Installation Approach: Describe the company’s experience and approach for managing, deploying, and physically installing the proposed subsystem across up to 20 globally dispersed teleport sites. This must include plans for site surveys, site-specific engineering, local integration support, and coordination of on-site acceptance testing. OTHER RELEVANT INFORMATION Use of a diagram(s) or figure(s) to depict the essence of the proposed solution is strongly encouraged. A Solution Brief submitted in response to a government solicitation (like a Call for Solutions or Commercial Solutions Opening) acts as a high-level pitch, but it is also a pre-contractual framework. A solution is meaningless without a timeline. Telling the government what you can build must be accompanied by how long it will take. If the solicitation specifies a 1.5-month maximum, including your proposed Period of Performance (PoP) proves to the evaluators that your technical approach is realistic and can actually be completed within strict constraints. Time directly dictates cost. A 45-day PoP implies a highly concentrated burst of work. Including the PoP explains your pricing; a $100,000 solution, for example, delivered over 1.5 months implies a very different team structure and urgency than the same cost spread over a year. For Solution Briefs, Pitches and/or Demos, and Proposals containing data that is not to be disclosed to the public for any purpose or used by the Government except for evaluation purposes, the vendor shall label any information they want protected as confidential. SOLUTION BRIEF DUE DATE/TIME Questions are due 05 November 2026 at noon Eastern Standard Time (EST) via email to Mr. Eric Belle, Project Management Specialist at eric.k.belle.civ@army.mil, Mr. Keith Magaw, Contract Specialist at keith.a.magaw.civ@army.mil, and Licinda M Peters, Contracting Officer at licinda.m.peters.civ@army.mil. Respondents who submit questions in response to the CfS, are requested to use “ACC-APG Digital IF CfS_ Questions Template_Attch 0001.” The completed question template should be attached to the email as an Excel document. This Call will remain open for no more than forty-five (45) days from the original posting. The due date for solution-Briefs submitted in response to this Call is no later than 10 December 2026. Solution Briefs received after the due date and time will not be considered for selection. SUBMISSION METHOD (UNCLASSFIED ONLY) In addition to soliciting SAM.Gov, the Digital IF effort utilizes AOS for the posting of Calls. Please submit your solution responses for the above requested information in PDF or Microsoft Word format no later than (NLT) Noon EST on 10 December 2026 to Mr. Eric Belle, Project Management Specialist at eric.k.belle.civ@army.mil, Mr. Keith Magaw, Contract Specialist at keith.a.magaw.civ@army.mil, and Licinda M Peters, Contracting Officer at licinda.m.peters.civ@army.mil. SOLUTION BRIEF EVALUATION CRITERIA (listed in priority order) Technical Understanding – Does the proposed solution demonstrate that the Vendor understands the Technical Objectives in section 2.2 and the Requirements/Information in section 3.1 of the Call for Solution? Does the Vendor clearly articulate how its technical solution meets the Technical Objectives and Requirements? Does the technical solution meet requirements in this Call? Capability Description & Technical Alignment – Does the proposed solution align with the Objectives? Interoperable Digital IF Conversion (Modular & Open). Does the proposed solution convert legacy analog L-band aggregate signals (950 MHz - 2.050 GHz) into standards-compliant Digital IF packet streams and vice versa? Does it work during both transmit (analog-to-digital) and receive (digital-to-analog)? Does the proposed conform to the DIFI standard? Does the proposed solution prevent vendor lock in? Advanced Digital Signal Processing (Adaptable). Does the proposed solution combine multiple, disparate Digital IF streams into a single aggregate stream for uplink? Does the proposed solution channelize a single aggregate downlink stream into multiple, individual Digital IF streams for processing? High-Performance Digital Transport (Scalable). Does the proposed solution utilize a non-blocking, high-speed digital switch fabric to route Digital IF streams between all subsystem components and external interfaces (e.g., Digital Modems, GAIT connections, WAN Transport etc.)? Does the proposed solution ensure that the DIF backbone switching fabric supports standard network scaling, redundancy, and high-throughput operations (up to 100 Gigabit Ethernet)? Does the proposed solution employ a DIFI backbone switch fabric that provides a means for rapid reconfiguration of packet forwarding by the Automated Management and Control function without the use of Layer 3 routing protocols? Does the proposed solution employ a DIFI backbone switch fabric that uses deterministic multicast routing based on the incoming port without requiring strict multicast tables? Automated Management and Control (Empowered). Does the proposed solution feature a software-based management suite? Does the proposed solution automate the establishment, termination, and monitoring of communication paths based on satellite access parameters? Does the proposed solution manage automatic protection switching for redundant components? Does the proposed solution support automated rerouting of critical traffic to alternate facilities? Integrated Test and Diagnostics. Does the proposed solution incorporate built-in test capabilities to generate, capture, and analyze Digital IF streams? Does the proposed solution allow for rapid troubleshooting, performance verification (e.g., EVM, spectral purity), and subsystem health monitoring without extensive external test equipment? Resilient and Maintainable Design (Resilient). Is the proposed solution designed for high availability Ai ≥ 0.9998)? Is it designed for a long service life (15 years)? Does it enable rapid maintainability (MTTR ≤ 30 minutes), using standard LRIs? Secure and Compliant Architecture (Secure): Is the proposed solution capable of achieving and maintaining the latest Risk Management Framework (RMF) authorization for a security categorization of (Confidentiality, Moderate), (Integrity, Moderate), (Availability, Moderate)? Will other proprietary knowledge, configuration or licenses inhibit the government from selecting a different contractor for future support if desired for the whole life cycle of the system? Are there foreseeable end-of-life/support/availability dates for any of the hardware, software or licenses within the system? Achieve Military Compliance and Certification Readiness. Does the proposed solution enable commercial units and data packages to be verified to meet the requirements of a strategic military environment? Does the subsystem performance adhere to applicable military standards, including SATCOM interoperability (MIL-STD-188-164C), electromagnetic interference (MIL-STD-461G), and environmental engineering (MIL-STD-810H)? Does the testing, data, and documentation produced support Wideband Global SATCOM (WGS) terminal certification? Global Integration and Installation. Does the proposed solution demonstrate a viable, low-risk approach to physical installation and system integration at up to 20 globally dispersed Teleport sites? Does the vendor possess the logistical, engineering, and field support capabilities required to achieve site acceptance and support operational readiness? Potential for Future Success – Does the proposed solution demonstrate that the Vendor has potential for success and a roadmap for sustaining and producing systems? Technical Readiness and Performance Potential: Does the proposed solution demonstrate the potential to meet specified performance metrics and address the Army needs? Is the underlying technology sound, scalable, and defensible? Are there plans for rigorous testing and validation? Product Viability and Market Fit: Does the proposed solution demonstrate a clear understanding of the Army operational requirements, a compelling value proposition, and evidence of military utility? Operational Readiness: Does the proposed solution outline a clear and realistic roadmap for achieving operational readiness, including any planned or completed testing, pilot programs, previous fieldings, and previous or current work with other Government Entities with its proposed technology? Integration Potential and Adaptability: Does the proposed solution demonstrate the potential to integrate smoothly with existing systems? Is the architecture flexible and adaptable to future needs? Team Expertise and Capability: Does the team possess the necessary skills and experience to execute the business plan and achieve projected milestones? Are roles clearly defined, and responsibilities assigned appropriately? Production Capacity: Does the solution address the availability of current units and a plan to scale production to meet potential Government demand. Sustainment and Training: Does the solution have a viable plan and long-term sustainment strategy, including field service support (FSRs) and training pipelines. Impact of Data Rights Asserted – Do any proposed data rights assertions limit or restrict the viability of the solution? Alternatively, does the Vendor mitigate performance and continuity risk through other means (e.g. escrow, Modular Open Systems Approach)? Does the Vendor discuss the Government’s Right to Repair? Does the Vendor include/offer warranties? Rough Order of Magnitude (unit pricing) – Is the ROM price provided realistic for the work to be performed and reflect a clear understanding of the requirements? Does the proposed solution address the risks associated with the cost of scaled procurement (quantity discounts) and long-term sustainment/licensing costs. Notice to offerors: The use of Artificial Intelligence (AI) tools may be used during evaluations. Any AI tools utilized by the Government will be employed in a manner consistent with applicable regulations that govern the protection of proprietary and source selection sensitive information. No proposal data will be transmitted to or processed by external, non-Government systems without appropriate safeguards and authorizations in place. Based on the results of the Step 1 evaluation, a Vendor will either receive a non-selection letter from the Contracting Officer providing a short summary of why the solution-brief was not selected, a notice of inclusion into the library, or an invitation to continue to the next step. Since CPE C2IN only requests minimal information from a Vendor at this initial stage (and not a full proposal), we generally will not provide significant feedback beyond the letter. STEP 2: PITCH SESSION/VENDOR TECHNICAL DEMONSTRATION (PS/VTD) The pitch session will allow selected companies from Step 1 to provide detailed information on their proposed solution. In-person pitch sessions will be held in an unclassified setting at Fort Belvoir, Virginia. If selected for an in-person pitch session (limited to 90 minutes with an additional 30-minute question and answer segment), each vendor will also conduct a VTD on the same day as the pitch session (limited to 1 hour to showcase subsystem capabilities. Vendors selected for a VTD will be given detailed testing information and requirements closer to the date of testing. The purpose of the VTD is to validate the information provided during the in-person vendor pitch session and give Army stakeholders an opportunity to witness the vendor subsystems’ capability performance within a controlled laboratory environment. The Government may bypass Step 2 and move a Vendor(s) into Step 3, based on the information provided in the Step 1 Brief. 3.4 STEP 3: PROPOSAL The Government will engage in collaborative discussions regarding the statement of work (SOW) with a Vendor who is invited to Step 3. During this process, the Government team and the Vendor team can discuss requirements, exchange ideas, share drafts of the proposal and SOW, and collaborate until a mutually beneficial SOW is agreed upon. Upon completion of discussions/collaboration, the Government may issue a Request for Proposal (“RFP”) to the Vendor selected. The RFP will have specific guidelines. Chiefly, Vendors must submit a technical volume, an updated SOW (if required), and a detailed price breakdown as it relates to the SOW. USE OF NON-GOVERNMENT ADVISORS Vendors are advised that data included in solution-briefs and technical/cost proposals submitted to the Government in response to this CSO Call may be released to support contractors or Federally Funded Research and Development Center (FFRDC) personnel for review and analysis. Any such personnel will serve in an advisory capacity only to the Government evaluators and will provide the CPE C2IN with independent review and analysis of technical matters and on accomplishment of objectives, tasks, and deliverables as proposed or required. All Government and non-government participants in the review process are required to execute government nondisclosure agreements and personal/organizational statements of financial interest, as appropriate. By submission, Vendors agree that their material may be reviewed by support contractors. SECTION 4 – AWARDS ANTICIPATED TYPE OF AWARDS The Government intends to award one FAR Part 12 commercial contract as a result of this Call for Solutions. The Government may also award an Other Transaction Authority (OTA(s)) as a result of a Vendor(s) submission(s). ANTICIPATED TIMELINE OF AWARD The selection of a Vendor for an award will be based on the relevance of their proposed solutions to meet the Government’s requirements, the maturity of their offerings, and their demonstrated ability to produce and sustain their capabilities. New and updated white papers will be accepted for the entire period the CSO Call is open. The estimated award timeline is first quarter of 2027. | - | Solicitation | 12/10/2026 |
Project Title: Tactical Communication Systems Procurement, Services & Sustainment (TCS-PSS) Reference Number: CSO-ARMY-TCS-PSS-2027 Primary NAICS: 334220 – Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing 1. Opportunity Overview The Department of the Army, representing the Capability Program Executive Command and Control Information Network (CPE C2IN), the Project Manager Command and Control Transport (PM C2T), and the Product Manager Tactical Communication Systems (PdM TCS), has issued a Call for Solutions (CfS) under Defense Federal Acquisition Regulation Supplement (DFARS) Part 212.70 to establish a 10-year enterprise acquisition framework for innovative tactical communication capabilities. This initiative seeks to secure a mix of single-award Indefinite Delivery, Indefinite Quantity (IDIQ) contracts and/or Other Transactions (OTs) to streamline the procurement, testing, fielding, and lifecycle sustainment of both legacy systems and emerging transport hardware and software. Focused on supporting Next Generation Command and Control (NGC2), the effort aims to deliver highly secure—National Security Agency (NSA) High Assurance certified or Sensitive but Unclassified - Encrypted (SBU-E) qualified—resilient, and interoperable communication systems. To counter future cryptographic threats, the framework is seeking capable vendors to provide a plan for incorporating Post-Quantum Cryptography (PQC) compliant algorithms and achieving National Institute of Standards and Technology (NIST) validation by 31 December 2030, ensuring robust data protection and mission command resilience in contested joint and coalition environments. 2. Critical Milestones & How to Respond Questions & Comments Due: 04 November 2026 at 16:00 EST White Papers Due: 14 December 2026 at 17:00 EST 3. Points of Contact Contracting Officer: Jennifer Anderson, jennifer.d.anderson57.civ@army.mil Contract Specialist: Aaliyah Coles, aaliyah.m.coles.civ@army.mil Please refer to the attached Call for Solutions (CSO-ARMY-TCS-PSS-2027) document for full submission instructions, evaluation criteria, and detailed technical characteristics. 12 November 2026: Amendment 4 – 1. Vendor Questions and Government Responses 2: The Government’s responses to the final round of vendor questions are attached to this amendment. In addition to the initial round of questions, vendors are strongly encouraged to review these responses in their entirety to aid in the development of their White Papers. The Question submittal deadline has passed, and no additional questions will be accepted at this time. 2. Call for Solutions Numbering: The Call for Solutions numbering headers have been corrected as some sections were previously misnumbered, please review to ensure consistency between this document and your White Papers. 3. Industry Day Announcement: ACC-APG will host a virtual Industry Day on Monday, 23 November 2026, from 1400 to 1500 EST via Microsoft Teams. During the event, ACC-APG and PdM TCS will provide prospective vendors with a brief overview of the Commercial Solutions Opening (CSO), the Army Open Solicitation (AOS), and the TCS-PSS effort. A Microsoft Teams meeting link will be provided no later than 20 November 2026 ONLY to vendors who have been verified and approved for access to the CUI documents in SAM. Participation shall be limited to a maximum of three (3) representatives per vendor. 4. Clarifications: Sections 1, 6, 7.1 (C. 8.), and 8.1 have been revised for clarity and administrative purposes in response to vendor questions. These revisions do not constitute material changes to the white paper requirements. Attachments: Attachment 1: TCS PSS_CfS Q&A_Round 2 All other terms, conditions, and submission guidelines remain unchanged. 29 October 2026: Amendment 3 – Vendor Questions and Government Responses: The Government’s responses to the initial round of vendor questions are attached to this amendment. Vendors are strongly encouraged to review these responses in their entirety before submitting additional questions, as the responses may address matters relevant to White Paper preparation. As stated in the prior amendment, additional questions must be submitted no later than November 4, 2026, in accordance with the Call for Solutions instructions. White Paper Submission Deadline: The White Paper submission deadline is extended to 14 December 2026. All White Papers must be submitted in accordance with the instructions and submission requirements established in the Call for Solutions. Security Criteria for SBU-E Tactical Radio Devices: An additional controlled document is available to verified vendors. This document includes security criteria for SBU-E tactical radio devices broken out into screening that must be satisfied and differentiating for trade off analysis. Access to this document is limited to vendors whose eligibility and access have been verified through the Government’s established process. Vendors shall handle the document in accordance with all applicable access, safeguarding, and distribution requirements. Attachments Attachment 1: Initial Vendor Questions and Government Responses Attachment 2: Security Criteria for Sensitive But Unclassified-Encrypted (SBU-E) Enclave Tactical Radio Devices — Available to Verified Vendors Only Amendment 2 (26 October 2026) – The submission schedule for the TCS-PSS Call for Solutions has been revised. The deadline for submitting questions is now extended to 04 November 2026, and the submission deadline for White Papers has been extended to 03 December 2026. To reiterate, to request access to Controlled Unclassified Information (CUI) documents, vendors must complete the following steps: SAM.gov Request: Submit an access request directly through the SAM.gov posting. (Note: ONLY SUBMIT ONE DOCUMENT APPROVAL REQUEST THROUGH SAM.GOV PER VENDOR). Email Verification Package: Send an email to jennifer.d.anderson57.civ@army.mil,; aaliyah.m.coles.civ@army.mil; and douglas.g.thier.civ@army.mil containing: Approved DD Form 2345 CAGE Code Joint Certification Program (JCP) Number Signed Non-Disclosure Agreements (NDAs) for all individuals requiring access to CUI document 3. Reminder, all vendor questions regarding this CfS must be submitted via the designated Microsoft Forms link. Important: No vendor emails containing questions regarding the CfS will be answered or responded to. The Government will consolidate and provide formal answers to all submitted questions following the final receipt of questions. All other terms, conditions, and submission guidelines remain unchanged. Amendment 1 (19 October 2026; 1600 EST) - The purpose of this amendment is to establish the mandatory security and verification protocols for vendors requesting access to the CUI and Export-Controlled attachments associated with this Call for Solutions. Certain attachments referenced in this Call for Solutions are marked as Controlled Unclassified Information (CUI) with Limited Dissemination Controls and/or Export Controls. The dissemination of Export-Controlled information is restricted by the Arms Export Control Act or the Export Administration Act of 1979. Export-controlled items shall not be disseminated outside the U.S. Government or to U.S. Government contractors without first verifying the recipient’s eligibility and authority to receive export-controlled information by verifying they have a current, valid DD Form 2345. Interested vendors must provide their CAGE Code, a copy of the DD2345, and their Joint Certification Program (JCP) number to Contracting Officer Jennifer Anderson (jennifer.d.anderson57.civ@army.mil), Contract Specialist Aaliyah Coles (aaliyah.m.coles.civ@army.mil) and Contract Specialist Douglas Thier (douglas.g.thier.civ@army.mil). Once the CAGE Code and JCP data has been verified the Controlled documents will be sent to interested parties. Additionally, vendors will be required to submit a Non-disclosure Agreement (NDA), for all personnel requiring access to these documents. A copy of this NDA can be obtained by emailing the Contracting Officer Jennifer Anderson (jennifer.d.anderson57.civ@army.mil), Contract Specialist Aaliyah Coles (aaliyah.m.coles.civ@army.mil) and Contract Specialist Douglas Thier (douglas.g.thier.civ@army.mil). For more information regarding the JCP approval process and the DD Form 2345 click or copy and paste the link below into a web browser: https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/SpecificDD2345Instructions.aspx | - | Solicitation | 12/14/2026 |
The U.S. Army Contracting Command, Aberdeen Proving Ground (ACC-APG) on behalf of the Communications-Electronics Command Security Assistance Management directorate (CECOM SAMD) is issuing this Sources Sought notice as a means of conducting market research to identify potential sources having an interest in, industry technologies available and capability to fulfill FMS requirements.See the attached document for detailed information. Disclaimer: Place of Performance Location is TBD. For the purpose of being able to post this Sources Sought, Aberdeen Proving Ground is listed for now. This will be updated if a future requirement results from this action. All questions and comments must be in Word or Excel and must be sent to the email listed:emanuel.e.green3.civ@army.mil no telephone calls will be accepted. No office calls or one on one meetings shall be requested or held related to this RFI. The Government will not pay for any information received in response to this request, nor will the Government compensate any respondent for any costs incurred in developing the information provided to the Government. | - | Market Research | 11/23/2026 |
Additional Details
Solicitation Number
BAA-25-R-C2CFT
Archive Date
Apr 7, 2030
Office Address
ABERDEEN PROVING GROU, MD, 21005-1846